Soybean-based biomaterials: preparation, properties and tissue regeneration potential

In Situ Nanoencapsulation of Curcumin in Soy Protein Isolate Amyloid-like Aggregates for Enhanced Wound Healing

The importance of amyloid nanofibrils made from food proteins is rising in diverse fields, such as biomedicine and food science. These protein nanofibrils (PNFs) serve as versatile and sustainable building blocks for biomaterials, characterized by their high β-sheet content and an ordered hydrogen bond network. These properties offer both stability and flexibility, along with an extreme aspect ratio and reactive functional groups. Plant-derived amyloid nanofibrils, such as soy protein isolate (SPI) PNFs, are increasingly favored due to their affordability and sustainability compared with animal proteins. This study aimed to explore the formation and application of SPI amyloid-like aggregates (SPIA) and their nanoencapsulation of curcumin (Cur) for biomedical purposes, particularly in wound healing. Under specific conditions of low pH and high temperature, SPIA formed, exhibited an amyloid nature, and successfully encapsulated Cur, thereby enhancing its stability and availability. Spectroscopic and microscopic analyses confirmed structural changes in SPIA upon the incorporation of Cur and the fabrication of SPIA@Cur. The obtained results indicate that in the presence of Cur, SPIA forms faster, attributed to accelerated SPI denaturation, an increased nucleation rate, and enhanced self-assembly facilitated by Cur's hydrophobic interactions and π-π stacking with SPI peptides. In vitro studies demonstrated the biocompatibility, biodegradability, and antioxidant properties of SPIA@Cur along with controlled release behavior. In vivo experiments in male Wistar rats revealed that both SPIA and SPIA@Cur significantly accelerate wound closure compared with untreated wounds, with SPIA@Cur showing slightly better efficacy. The histological analysis supported enhanced wound healing, indicating the potential of SPIA@Cur for biomedical applications.

Management of diabetic foot ulcers using topical probiotics in a soybean-based concentrate: a multicentre study

OBJECTIVE

Diabetic foot ulcer (DFU) is a common complication in people with diabetes. Standard management includes strict glycaemic management, control of the infection, revascularisation, debridement, mechanical offloading and foot care education. This study aimed to evaluate the efficacy of using topical probiotics in a soybean-based concentrate in the management of DFUs.

METHOD

A retrospective, multicentre evaluation of patients with diabetes with non-infected DFUs between October 2020 and October 2021, and who were treated with twice daily topical application of probiotics in a soybean-based concentrate as an adjunct to standard wound care.

RESULTS

A total of 22 patients were enrolled into this study, including 16 males and six females, with a mean age of 61 years (range: 31-89 years). Defect size ranged from 1-33.5cm2 (mean: 7.2cm2). The mean number of days until complete healing was 51 (range: 21-112 days). Of the patients, 83% showed complete healing at the end of 16 weeks, 72% showed complete healing at 12 weeks, 56% at eight weeks, and 22% at four weeks. The wounds showed an average decrease in size of 0.59cm2 (9%) per week, calculated using generalised estimating equation.

CONCLUSION

This findings of this study provide a new perspective on the therapeutic potential of probiotics as an effective form of management in patients with small, hard-to-heal (chronic) DFUs.

Functional anti-bone tumor biomaterial scaffold: construction and application

Bone tumors, including primary bone tumors and bone metastases, have been plagued by poor prognosis for decades. Although most tumor tissue is removed, clinicians are still confronted with the dilemma of eliminating residual cancer cells and regenerating defective bone tissue after surgery. Therefore, functional biomaterial scaffolds are considered to be the ideal candidates to bridge defective tissues and restrain cancer recurrence. Through functionalized structural modifications or coupled therapeutic agents, they provide sufficient mechanical strength and osteoinductive effects while eliminating cancer cells. Numerous novel approaches such as photodynamic, photothermal, drug-conjugated, and immune adjuvant-assisted therapies have exhibited remarkable efficacy against tumors while exhibiting low immunogenicity. This review summarizes the progress of research on biomaterial scaffolds based on different functionalization strategies in bone tumors. We also discuss the feasibility and advantages of the combined application of multiple functionalization strategies. Finally, potential obstacles to the clinical translation of anti-tumor bone bioscaffolds are highlighted. This review will provide valuable references for future advanced biomaterial scaffold design and clinical bone tumor therapy.

Investigation of wound healing efficiency of multifunctional eudragit/soy protein isolate electrospun nanofiber incorporated with ZnO loaded halloysite nanotubes and allantoin

One significant aspect of the current therapeutic agents employed in wound healing involves the engineering of nano polymeric scaffolds to mimic the properties of extracellular matrix (ECM). The present work aimed to prepare and evaluate Eudragit® L100 (EU) nanofibers in combination with soy protein isolate (SPI). Allantoin (Ala) with a 2 wt% was encapsulated as a model drug renowned for its anti-inflammatory and antioxidant agents. Moreover, the synthesized ZnO-halloysite nanotubes (ZHNTs) with different concentrations of 1, 3, and 5 wt% were incorporated into the EU/SPI/Ala nanofiber as a reinforcing filler and a remarkable antibacterial agent. The scanning electron microscope (SEM) analysis showed that by increasing the weight percentage of SPI from 1 % to 2.5 %, the average diameter of nanofibers decreased from 132.3 ± 51.3 nm to 126.7 ± 47.2 nm. It was 223.5 ± 95.6 nm for nanofibers containing 5 wt% ZHNTs (the optimal sample). The evaluation of in vitro release kinetics of Ala for 24 h, showed a burst release during the first 2 h and a sustained release during the subsequent times. Moreover, the structure, crystallinity, and thermal stability of synthesized nanofibers were characterized by Fourier Transform Infrared Spectrometry (FTIR), X-ray diffraction (XRD), and Thermo gravimetric analysis (TGA), respectively. In vitro degradation and mechanical characteristics of these nanofibers were studied. Furthermore, the capability of the nanofibers for cell proliferation was revealed through the MTT test and field emission scanning electron microscopy (FESEM) images of cell attachment. The antimicrobial activity of EU/SPI/Ala/ZHNTs showed that this sample with high ZHNTs content (5 w%t) had the most remarkable antibacterial activity against S. aureus. The results revealed that EU/SPI/Ala/ZHNTs mats could be promising potential wound dressings.

Optimization and characterization of a novel tea tree oil-integrated poly (ε-caprolactone)/soy protein isolate electrospun mat as a wound care system

A set of poly (ε-caprolactone)/soy protein isolate (PCL/SPI) mats with different ratios of PCL to SPI was fabricated using the electrospinning method. The mat with PCL to SPI ratio of 95:5 (PS 95:5) had the narrowest nanofibers, the highest percentage of porosity, the lowest swelling ratio, the least vapor transmission, and the slowest degradation rate among the prepared mats. The hemolysis assay indicated that all mats can be considered biocompatible biomaterials. In continue, three different weight ratios of tea tree oil (TTO) were loaded into the PS 95:5 mat. The release profiles illustrated that higher amounts of TTO could be released in an acidic environment. The antioxidant activity of the mats increased by the increase in their TTO content. The cell viability test, cell adhesion images, and live/dead assay of TTO-loaded mats affirmed that all fabricated mats were biocompatible. The scratch wound assay expressed that TTO accelerates the rate of wound closure. The TTO-loaded mats illustrated antibacterial activity against both Escherichia coli and Staphylococcus aureus bacteria. The obtained outcomes revealed that TTO-loaded PCL/SPI mats can be considered promising potential wound dressings.

In vivo study of the efficacy of bupivacaine-eluting novel soy protein wound dressings in a rat burn model

Dealing with wound related pain is an integral part of treatment. Systemic administration of analgesic and anesthetic agents is a common solution for providing pain relief to patients but comes at a risk of severe side effects as well as addiction. To overcome these issues, research efforts were madeto provide a platform for local controlled release of pain killers. We have developed a bilayer soy protein-based wound dressing for the controlled local release of bupivacaine to the wound site. The combination of a dense and a porous layer provides a platform for cell growth and proliferation as well as physical protection to the wound site. The current study focuses on the in vitro bupivacaine release profile from the dressing and the corresponding in vivo results of pain levels in a second-degree burn model on rats. The Rat Grimace Scale method and the Von Frey filaments method were used to quantify both, spontaneous pain and mechanically induced pain. A high burst release of 61.8 ± 1.9% of the loaded drug was obtained during the initial hour, followed by a slower release rate during the following day. The animal trials show that the RGS scores of the bupivacaine-treated group were significantly lower than these of the untreated group, proving a decrease of 51-68% in pain levels during days 1-3 after burn. Hence, successful pain reduction of spontaneous pain as well as mechanically induced pain, for at least three days after burn was achieved. It is concluded that our novel bupivacaine eluting soy protein wound dressings are a promising new concept in the field of local controlled drug release for pain management.

Designing Double-Layer Multi-Material Composite Patch Scaffold with Adhesion Resistance for Hernia Repair

Hernia repair mesh is associated with a number of complications, including adhesions and limited mobility, due to insufficient mechanical strength and non-resorbability. Among them, visceral adhesions are one of the most serious complications of patch repair. In this study, a degradable patch with an anti-adhesive layer was prepared for hernia repair by 3D printing and electrospinning techniques using polycaprolactone (PCL), polyvinyl alcohol (PVA), and soybean peptide (SP). The study into the physicochemical properties of the patch was found that it had adequate mechanical strength requirements (16 N cm^-1 ) and large elongation at break, which were superior than commercial polypropylene (PP) patches. In vivo and in vitro experiments showed that human umbilical vein endothelial cells (HUVECs) proliferated well on composite patches, and showed excellent biocompatibility with the host and little adhesion through a rat abdominal wall defect model. In conclusion, the results of this study show that composite patch can effectively reduce the occurrence of adhesions, while the addition of SP in the patch further enhances its biocompatibility. We believe that a regenerative biological patch with great potential in hernia repair provides a new strategy for the development of new biomimetic biodegradable patches. This article is protected by copyright. All rights reserved.

Freeze-Thaw-Induced Physically Cross-linked Superabsorbent Polyvinyl Alcohol/Soy Protein Isolate Hydrogels for Skin Wound Dressing: In Vitro and In Vivo Characterization

In this work, polyvinyl alcohol (PVA)- and soy protein isolate (SPI)-based scaffolds were prepared by physical cross-linking using the freeze-thaw method. The PVA/SPI ratio was varied to examine the individual effects of the two constituents. The physicochemical properties of the fabricated scaffolds were analyzed through Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, thermogravimetric analysis, and differential scanning calorimetry. The SPI concentration significantly affected the properties of scaffolds, such as the extent of gelation (%), pore size, porosity, degradation, swelling, and surface wettability. The in vitro degradation of fabricated hydrogels was evaluated in phosphate-buffered saline and lysozyme solution for a duration of 14 days. The in vitro compatibility of prepared hydrogels was evaluated by the MTT assay with NIH-3T3 cells (fibroblast). The water vapor transmission rate (WVTR) assays showed that all hydrogels possessed WVTR values in the range of 2000-2500 g m^-2 day^-1, which is generally recommended for ideal wound dressing. Overall, the obtained results reveal that the fabricated scaffolds have excellent biocompatibility, mechanical strength, porosity, stability, and degradation rate and thus carry enormous potential for tissue engineering applications. Furthermore, a full-thickness wound healing study performed in rats supported them as a promising wound dressing material.

Bupivacaine-eluting soy protein structures for controlled release and localized pain relief: An in vitro and in vivo study

Burn pain is known to be excruciating, and while burn care has greatly advanced, treatment for burn-related pain is lacking. Current pain relief methods include systemic administration of analgesics, which does not provide high drug concentration at the wound site. In the present study, soy protein was used as the base material for bupivacaine-loaded hybrid wound dressings. The effect of the formulation on the drug release profile was studied using high performance liquid chromatography, and the cytotoxicity was tested on human fibroblasts. A second-degree burn model in rats was used to quantify the efficacy of the wound dressings in vivo, using the Rat Grimace Scale. All tested films exhibited high biocompatibility, and the drug release profiles showed rapid release during the initial 5 hr and a continuous slower release for another 24 hr. Significant pain relief was achieved in the animal trials, proving a decrease of 51-68% in pain levels during days 1-3 post-burn. Hence, the results indicate a safe and controlled bupivacaine release for a period of more than 24 hr, effectively treating pain caused by second-degree burns. The understanding of the formulation-properties effects, together with our in vivo study, enables to advance this field toward tailorable systems with high therapeutic potential.

Protein and Polysaccharide-Based Electroactive and Conductive Materials for Biomedical Applications

Electrically responsive biomaterials are an important and emerging technology in the fields of biomedical and material sciences. A great deal of research explores the integral role of electrical conduction in normal and diseased cell biology, and material scientists are focusing an even greater amount of attention on natural and hybrid materials as sources of biomaterials which can mimic the properties of cells. This review establishes a summary of those efforts for the latter group, detailing the current materials, theories, methods, and applications of electrically conductive biomaterials fabricated from protein polymers and polysaccharides. These materials can be used to improve human life through novel drug delivery, tissue regeneration, and biosensing technologies. The immediate goal of this review is to establish fabrication methods for protein and polysaccharide-based materials that are biocompatible and feature modular electrical properties. Ideally, these materials will be inexpensive to make with salable production strategies, in addition to being both renewable and biocompatible.

Electrospinning Proteins for Wound Healing Purposes: Opportunities and Challenges

With the growth of the aging population worldwide, chronic wounds represent an increasing burden to healthcare systems. Wound healing is complex and not only affected by the patient's physiological conditions, but also by bacterial infections and inflammation, which delay wound closure and re-epithelialization. In recent years, there has been a growing interest for electrospun polymeric wound dressings with fiber diameters in the nano- and micrometer range. Such wound dressings display a number of properties, which support and accelerate wound healing. For instance, they provide physical and mechanical protection, exhibit a high surface area, allow gas exchange, are cytocompatible and biodegradable, resemble the structure of the native extracellular matrix, and deliver antibacterial agents locally into the wound. This review paper gives an overview on cytocompatible and biodegradable fibrous wound dressings obtained by electrospinning proteins and peptides of animal and plant origin in recent years. Focus is placed on the requirements for the fabrication of such drug delivery systems by electrospinning as well as their wound healing properties and therapeutic potential. Moreover, the incorporation of antimicrobial agents into the fibers or their attachment onto the fiber surface as well as their antimicrobial activity are discussed.

Electrospun, sepiolite-loaded poly(vinyl alcohol)/soy protein isolate nanofibers: Preparation, characterization, and their drug release behavior

Wound management and drug release are important applications for electrospun nanofibers. In this study, poly(vinyl alcohol)/soy protein isolate (PVA/SPI) nanofiber mats were produced by electrospinning and used as drug carriers. The mats were loaded with ketoprofen by dissolving the drug in the solutions for nanofiber electrospinning. To improve drug release control of the nanofiber mats, a natural tubular nanoparticle, sepiolite, was used as a secondary release control tool. Three types of nanofiber mats were fabricated by electrospinning the solutions prepared by 1) direct mixing of PVA, SPI, and ketoprofen, 2) direct mixing of PVA, SPI, sepiolite, and ketoprofen, and 3) mixing PVA, SPI, and ketoprofen-preloaded sepiolite. The drug release behavior of the mats was studied using UV-vis spectroscopy and the mechanical properties of the mats were investigated by tensile testing. The results showed that sepiolite had a high impact on the release of ketoprofen, with the drug-loaded sepiolite leading to the slowest release. The incorporation of SPI and sepiolite into the PVA nanofibers also increased the mechanical strength of the mats, making them easier to handle and potentially longer-lasting. This study demonstrated the potential of using natural biomaterials and nanomaterials as the components of controlled-release drug delivery vehicles.

Protein based packaging of plant origin: Fabrication, properties, recent advances and future perspectives

Huge plastic waste is receiving worldwide attention nowadays due to its resistance to degradation and toxicity on environmental components including humans. Improper disposal of plastics affect the food chain and compromise various activities of aquatic life. Each facet of the plastic waste problem requires a significant attention and compels its elimination from the environment due to its ecologically deleterious threats. Therefore, this problem of plastic pollution and issues related thereof merits an attention regarding the alternatives wherein biopolymer based packaging has a potential role to play. This line of research has received a renewed focus where biodegradable films are being developed from proteins which are obtained from animals (include fish myofibrillar protein, collagen, gelatine, etc), and plants especially graminacea (rice, wheat, maize, barley etc), leguminaceae (soya beans, pea, etc.), asteraceae (sunflower) but little attention has been paid towards the potential of aquatic plants for development of packaging material. The present review provides a comprehensive account of biodegradable films developed from plant proteins viz. soy protein, wheat gluten, corn zein and sunflower protein as emerging supplement to plastics. Moreover, this article also tip-offs the potential of macrophytes for fabrication of protein based packaging films incorporated with bioactive materials extracted from macrophytes.

A biodegradable soy protein isolate-based waterborne polyurethane composite sponge for implantable tissue engineering

A biodegradable soy protein isolate-based waterborne polyurethane composite sponge (SWPU) was prepared from soy protein isolate (SPI) and polyurethane prepolymer (PUP) by a process involving chemical reaction and freeze-drying. Effects of SPI content (0, 10%, 30%, 50%, 70%) on the micro-structure and physical properties of the composite sponges were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The results showed that the reaction between -NCO of PUP and -NH₂ of SPI formed porous SPI-based WPU composite sponges. The results of the water absorption ratio measurement, solvent resistance measurement and compressive testing showed that water absorption, hydrophilicity, and tensile strength in the dry state of the composite sponges increased with the increase of SPI content. Especially, the tensile strength ranged from 0.3 MPa to 5.5 MPa with the increase in SPI content. The cytocompatibility and biodegradability of the composite sponges were evaluated by in vitro cell culture and in vivo implantation experiments. The results indicated that a certain SPI content in the sponges could promote the adhesion, growth, and proliferation of cells, enhance the cytocompatibility and accelerate the degradation speed of composite sponges. During the in vivo implanting period within 9 months, SWPU-50 sponge containing 50% of SPI brought out the lowest activated inflammatory reaction, most newly-regenerated blood capillaries, and best histocompatibility. All results indicated that SWPU-50 composite sponges had greatest potential for tissue engineering.

Soy protein isolate supplemented silk fibroin nanofibers for skin tissue regeneration: Fabrication and characterization

Biocompatible soy protein isolate/silk fibroin (SPI/SF) nanofibrous scaffolds were successfully fabricated through electrospinning a novel protein blend SPI/SF. Prepared nanofibers were treated with ethanol vapor to obtain an improved water-stable structure. Fabricated scaffolds were characterized through scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), UV-VIS spectrophotometry and image analysis. The mean diameters of SPI/SF electrospun fibers were observed ranging between 71 and 160 nm. The scaffolds were found significantly stable for a prolong duration at the room temperature as well as at 37 °C, when placed in phosphate buffered saline, nutrient medium, and lysozyme-containing solution. The potential of fabricated scaffolds for skin tissue regeneration was evaluated by in vitro culturing of standard cell lines i.e., fibroblast cells (L929-RFP (red fluorescent protein) and NIH-3T3) and melanocytes (B16F10). The outcomes revealed that all the fabricated nanofibrous scaffolds were non-toxic towards normal mammalian cells. In addition, healing of full-thickness wound in rats within 14 days after treatment with a nanofibrous scaffold demonstrated its suitability as a potential wound dressing material. Interestingly, we found that nanofibers induced a noticeable reduction in the proliferation rate of B16F10 melanoma cells.

Soya protein isolate-polyethylene oxide electrospun nanofiber membrane with bone marrow-derived mesenchymal stem cell for enhanced bone regeneration

In this study, we prepared an electrospun nanofiber membrane from soya protein isolate (SPI) and polyethylene oxide (PEO) loaded with rat bone marrow-derived mesenchymal stem cells (rBMSC), as a cell-scaffold approach to enhance bone regeneration. Different ratios of SPI:PEO (7:0, 7:1, 7:3, 7:5, and 0:7) was investigated to obtain uniform nanofibers, and crosslinked with EDC/NHS to stabilize the membranes. SPI/PEO membrane (7:3) was found to create more uniform and stable nanofibers at a flow rate of 9 µL/min, spun in a cylindrical collector rotating at 350 r/min, 23 kV DC voltage, and needle tip to collector distance of 13 cm. The loaded rBMSC were pre-differentiated to ensure commitment towards osteoblastic lineage. The SPI/PEO electrospun nanofiber membranes were successful in allowing for cell attachment and growth of the rBMSC and was further investigated in vivo using a rat skull defect model. New bone formation was observed for the optimized SPI/PEO electrospun nanofiber membrane (7:3) with and without rBMSC, but with faster new bone formation for SPI/PEO electrospun nanofiber membrane loaded with rBMSC as compared to SPI/PEO electrospun nanofiber membrane only and control (defect only).

Soybean-modified polyamide-6 mats as a long-term cutaneous wound covering

Engineered skin coverings have been adopted clinically to support extensive and deep wounds that result in fewer healthy skin remaining and therefore take longer to heal. Nonetheless, these biomaterials demand intensive labor and an expensive final cost. In comparison to conventional bandages, which do not meet all the requirements of wound care, electrospun fiber mats could potentially provide an excellent environment for healing. In this work, we developed two nanostructured scaffolds based on polyamide-6 (PA-6) to be tested as a wound covering in a rat model of full-thickness incisional wound healing. The central idea was to create a bioconstruct that is simple to implement and biologically safe, with a high survival rate, which provides physical support and biological recognition for new functional tissues. An unmodified PA-6 and a soybean-modified PA-6 were employed as nanofibrillar matrices in this study. The biomaterials showed a dimensional homology to natural extracellular matrix components and neither in vitro toxicity nor in vivo side effects. Both polymeric scaffolds were resistant to the sterilization process and could promote the attachment of 3T3 fibroblast cells, besides successfully incorporating the growth factor PDGF-BB, which had its bioactivity extended for up to 12 h under simulated conditions. The modification of PA-6 chains with a fatty acid derivative increased the scaffold's surface free energy, favoring cell proliferation, collagen formation, and ECM secretion. These results confirm the potential of these materials as a topical dermal covering for skin regeneration.

Accelerated skin wound healing by soy protein isolate-modified hydroxypropyl chitosan composite films

In this study, a series of hydroxypropyl chitosan (HPCS)/soy protein isolate (SPI) composite films (HCSFs) with different SPI contents were developed via crosslinking, solution casting, and evaporation process. Effects of the SPI content on the structure and physical properties of the HCSFs were characterized by Fourier transform infrared spectroscopy, X-ray diffraction patterns, scanning electron microscopy, swelling kinetics analysis, and mechanical testing. The HCSFs exhibited a lower swelling ratio with an increase in the SPI content. The tensile strength was in a tunable range from 7.88 ± 3.08 to 40.44 ± 2.31 MPa by adjusting the SPI content. Cytocompatibility and hemocompatibility of the HCSFs were evaluated by a series of in vitro assays, including MTT assay, live/dead assay, cell morphology observation, hemolysis ratio testing, and plasma recalcification time measurement. Results showed that the HCSFs support L929 cells attachment and proliferation without obvious hemolysis, indicating good cytocompatibility and hemocompatibility. The potential of resultant HCSFs as the wound dressings was investigated using a full-thickness skin wound model in rats. Results exhibited that the HCSFs with 50% SPI content had the fastest healing speed and the best skin regeneration efficiency and may be a potential candidate as the wound dressing.

Soy Protein/Cellulose Nanofiber Scaffolds Mimicking Skin Extracellular Matrix for Enhanced Wound Healing

Historically, soy protein and extracts have been used extensively in foods due to their high protein and mineral content. More recently, soy protein has received attention for a variety of its potential health benefits, including enhanced skin regeneration. It has been reported that soy protein possesses bioactive molecules similar to extracellular matrix (ECM) proteins and estrogen. In wound healing, oral and topical soy has been heralded as a safe and cost-effective alternative to animal protein and endogenous estrogen. However, engineering soy protein-based fibrous dressings, while recapitulating ECM microenvironment and maintaining a moist environment, remains a challenge. Here, the development of an entirely plant-based nanofibrous dressing comprised of cellulose acetate (CA) and soy protein hydrolysate (SPH) using rotary jet spinning is described. The spun nanofibers successfully mimic physicochemical properties of the native skin ECM and exhibit a high water retaining capability. In vitro, CA/SPH nanofibers promote fibroblast proliferation, migration, infiltration, and integrin β1 expression. In vivo, CA/SPH scaffolds accelerate re-epithelialization and epidermal thinning as well as reduce scar formation and collagen anisotropy in a similar fashion to other fibrous scaffolds, but without the use of animal proteins or synthetic polymers. These results affirm the potential of CA/SPH nanofibers as a novel wound dressing.

Microstructure and in vitro cellular response to novel soy protein-based porous structures for tissue regeneration applications

Interest in the development of new bioresorbable structures for various tissue engineering applications is on the rise. In the current study, we developed and studied novel soy protein-based porous blends as potential new scaffolds for such applications. Soy protein has several advantages over the various types of natural proteins employed for biomedical applications due to its low price, non-animal origin and relatively long storage time and stability. In the present study, blends of soy protein with other polymers (gelatin, pectin and alginate) were added and chemically cross-linked using the cross-linking agents carbodiimide or glyoxal, and the porous structure was obtained through lyophilization. The resulting blend porous structures were characterized using environmental scanning microscopy, and the cytotoxicity of these scaffolds was examined in vitro. The biocompatibility of the scaffolds was also evaluated in vitro by seeding and culturing human fibroblasts on these scaffolds. Cell growth morphology and adhesion were examined histologically. The results show that these blends can be assembled into porous three-dimensional structures by combining chemical cross-linking with freeze-drying. The achieved blend structures combine suitable porosity with a large pore size (100–300 µm). The pore structure in the soy-alginate scaffolds possesses adequate interconnectivity compared to that of the soy-gelatin scaffolds. However, porous structure was not observed for the soy-pectin blend, which presented a different structure with significantly lower porosities than all other groups. The in vitro evaluation of these porous soy blends demonstrated that soy-alginate blends are advantageous over soy-gelatin blends and exhibited adequate cytocompatibility along with better cell infiltration and stability. These soy protein scaffolds may be potentially useful as a cellular/acellular platform for skin regeneration applications.

Biomedical applications of soy protein: A brief overview

Soy protein (SP) based materials are gaining increasing interest for biomedical applications because of their tailorable biodegradability, abundance, being relatively inexpensive, exhibiting low immunogenicity, and for being structurally similar to components of the extracellular matrix (ECM) of tissues. Analysis of the available literature indicates that soy protein can be fabricated into different shapes, being relatively easy to be processed by solvent or melt based techniques. Furthermore soy protein can be blended with other synthetic and natural polymers and with inorganic materials to improve the mechanical properties and the bioactive behavior for several demands. This review discusses succinctly the biomedical applications of SP based materials focusing on processing methods, properties and applications highlighting future avenues for research.

In vivo performance of novel soybean/gelatin-based bioactive and injectable hydroxyapatite foams

Major limitations of calcium phosphate cements (CPCs) are their relatively slow degradation rate and the lack of macropores allowing the ingrowth of bone tissue. The development of self-setting cement foams has been proposed as a suitable strategy to overcome these limitations. In previous work we developed a gelatine-based hydroxyapatite foam (G-foam), which exhibited good injectability and cohesion, interconnected porosity and good biocompatibility in vitro. In the present study we evaluated the in vivo performance of the G-foam. Furthermore, we investigated whether enrichment of the foam with soybean extract (SG-foam) increased its bioactivity. G-foam, SG-foam and non-foamed CPC were implanted in a critical-size bone defect in the distal femoral condyle of New Zealand white rabbits. Bone formation and degradation of the materials were investigated after 4, 12 and 20weeks using histological and biomechanical methods. The foams maintained their macroporosity after injection and setting in vivo. Compared to non-foamed CPC, cellular degradation of the foams was considerably increased and accompanied by new bone formation. The additional functionalization with soybean extract in the SG-foam slightly reduced the degradation rate and positively influenced bone formation in the defect. Furthermore, both foams exhibited excellent biocompatibility, implying that these novel materials may be promising for clinical application in non-loaded bone defects.

Pre-clinical evaluation of soybean-based wound dressings and dermal substitute formulations in pig healing and non-healing in vivo models

In the last decade, a new class of natural biomaterials derived from de-fatted soybean flour processed by either thermoset or extraction procedures has been developed. These biomaterials uniquely combine adaptability to various clinical applications to proven tissue regeneration properties. In the present work, the biomaterials were formulated either as hydrogel or as paste formulation and their potential as wound dressing material or as dermal substitute was assessed by two in vivo models in pig skin: The healing full-thickness punch biopsy model and the non-healing full-thickness polytetrafluoroethylene (PTFE) chamber model. The results clearly show that collagen deposition is induced by the presence of these biomaterials. A unique pattern of early inflammatory response, eliciting neutrophils and controlling macrophage infiltration, is followed by tissue cell colonization of the wound bed with a significant deposition of collagen fibers. The study also highlighted the importance in the use of optimal formulations and appropriate handling upon implantation. In large size, non-healing wounds, wound dermis was best obtained with the paste formulation as hydrogels appeared to be too loose to ensure lasting scaffolding properties. On the contrary, packing of the granules during the application of paste reduced biomaterial degradation rate and prevent the penetration of newly vascularized tissue, thus impeding grafting of split-thickness autologous skin grafts on the dermal substitute base.

Epoxidized soybean oil/ZnO biocomposites for soft tissue applications: preparation and characterization

Biocompatible and biodegradable nanocomposites comprising epoxidized soybean oil (ESO) as matrix, zinc oxide (ZnO) nanoparticles as reinforcements, and 4-dimethylaminopyridine (DMAP) as a catalyst have been successfully prepared via epoxidization of the double bonds of the vegetable oil, ultrasonication, and curing without the need for interfacial modifiers. Their morphology, water uptake, thermal, mechanical, barrier, tribological, and antibacterial properties have been investigated. FT-IR analysis revealed the existence of strong ESO-ZnO hydrogen-bonding interactions. The nanoparticles acted as mass transport barriers, hindering the diffusion of volatiles generated during the decomposition process and leading to higher thermal stability, and also reduced the water absorption and gas permeability of the bioresin. Significant improvements in the static and dynamic mechanical properties, such as storage and Young's moduli, tensile strength, toughness, hardness, glass transition, and heat distortion temperature, were attained on reinforcement. A small drop in the nanocomposite stiffness and strength was found after exposure to several cycles of steam sterilization or to simulated body fluid (SBF) at physiological temperature. Extraordinary reductions in the coefficient of friction and wear rate were detected under both dry and SBF conditions, confirming the potential of these nanoparticles for improving the tribological performance of ESO. The nanocomposites displayed antimicrobial action against human pathogen bacteria with and without UV illumination, which increased progressively with the ZnO content. These sustainable, ecofriendly, and low-cost biomaterials are very promising for use in biomedical applications, like structural tissue engineering scaffolds.

In vivo acute and humoral response to three-dimensional porous soy protein scaffolds

Increasing interest in using soy biomaterials for tissue engineering applications has prompted investigation into the in vivo biocompatibility of soy implants. In this study, the biocompatibility of soy protein scaffolds fabricated using freeze-drying and 3-D printing was assessed using a subcutaneous implant model in BALB/c mice. The main objectives of this study were: (1) to compare soy protein with bovine collagen, a well-characterized natural protein implant, by implanting scaffolds of the same protein weight, and (2) to observe the effects of soy scaffold microstructure and amount of protein loading, which also alters the degradation properties, on the acute and humoral immune responses towards soy. Results showed that freeze-dried soy scaffolds fully degraded after 14 days, whereas collagen scaffolds (of the same protein weight) remained intact for 56 days. Furthermore, Masson's trichrome staining showed little evidence of damage or fibrosis at the soy implant site. Scaffolds of higher soy protein content, however, were still present after 56 days. H&E staining revealed that macrophage infiltration was hindered in the denser bioplotted soy scaffolds, causing slower degradation. Analysis of soy-specific antibodies in mouse serum after implantation revealed levels of IgG1 that correlated with higher scaffold weight and protein density. However, no soy-specific IgE was detected, indicating the absence of an allergic response to the soy implants. These results demonstrate that soy protein could be an acceptable biocompatible implant for tissue regeneration, and that scaffold porosity, soy protein density and scaffold degradation rate significantly affect the acute and humoral immune response.

Investigation of soy protein hydrogels for biomedical applications: Materials characterization, drug release, and biocompatibility

Soy protein is emerging as a novel material for biomedical applications due to its abundance in nature, ease of isolation and processing, and inherent properties for mediating cell adhesion and growth. In this study, mechanically robust soy protein hydrogels were fabricated with varying weight percentages in water (15, 18, and 20 wt.%) without the use of chemical modifiers or crosslinkers. This fabrication method is beneficial because it allows for the direct injection of these soy hydrogels in vivo. The material properties, drug releasing capability, and biocompatibility in vitro and in vivo were assessed. The different concentrations of soy protein varied the rheological, swelling, and mechanical properties and affected the release of the model drug fluorescein from the hydrogels in vitro. Higher weight percent of soy increased the robustness of the hydrogels and released a lower amount of fluorescein over one week. Viability and growth of seeded L929 mouse fibroblasts demonstrated that the hydrogels were biocompatible in vitro for one week. Soy hydrogels were injectable in vivo into the subcutaneous pocket of mice, and histological staining showed minimal fibrous capsule formation for up to 20 days. The ease of fabrication and tailorable properties of soy hydrogels render it a promising biomaterial for tissue engineering and drug delivery applications, particularly for wound healing.

Three-dimensional printing of soy protein scaffolds for tissue regeneration

Fabricating three-dimensional (3D) porous scaffolds with controlled structure and geometry is crucial for tissue regeneration. To date, exploration in printing 3D natural protein scaffolds is limited. In this study, soy protein slurry was successfully printed using the 3D Bioplotter to form scaffolds. A method to verify the structural integrity of resulting scaffolds during printing was developed. This process involved measuring the mass extrusion flow rate of the slurry from the instrument, which was directly affected by the extrusion pressure and the soy protein slurry properties. The optimal mass flow rate for printing soy slurry at 27°C was 0.0072±0.0002 g/s. The addition of dithiothreitol to soy slurries demonstrated the importance of disulfide bonds in forming solid structures upon printing. Resulting Bioplotted soy protein scaffolds were cured using 95% ethanol and post-treated using dehydrothermal treatment (DHT), a combination of freeze-drying and DHT, and chemical crosslinking using 1-ethyl-3-(3 dimethylaminopropyl)carbodiimide (EDC) chemistry. Surface morphologies of the different treatment groups were characterized using scanning electron microscopy. Scaffold properties, including relative crosslink density, mass loss upon rinsing, and compressive modulus revealed that EDC crosslinked scaffolds were the most robust with moduli of approximately 4 kPa. Scaffold geometry (45° and 90° layer rotations) affected the mechanical properties for DHT and EDC crosslinked scaffolds. Seeding efficiency of human mesenchymal stem cells (hMSC) was highest for nontreated and thermally treated scaffolds, and all scaffolds supported hMSC viability over time.

Novel soy protein wound dressings with controlled antibiotic release: mechanical and physical properties

Naturally derived materials are becoming widely used in the biomedical field. Soy protein has advantages over various types of natural proteins employed for biomedical applications due to its low price, non-animal origin and relatively long storage time and stability. In the current study soy protein isolate (SPI) was investigated as a matrix for wound dressing applications. The antibiotic drug gentamicin was incorporated into the matrix for local controlled release and, thus, protection against bacterial infection. Homogeneous yellowish films were cast from aqueous solutions. After cross-linking they combined high tensile strength and Young's modulus with the desired ductility. The plasticizer type, cross-linking agent and method of cross-linking were found to strongly affect the tensile properties of the SPI films. Selected SPI films were tested for relevant physical properties and the gentamicin release profile. The cross-linking method affected the degree of water uptake and the weight loss profile. The water vapor transmission rate of the films was in the desired range for wound dressings (∼2300 g m(-2) day(-1)) and was not affected by the cross-linking method. The gentamicin release profile exhibited a moderate burst effect followed by a decreasing release rate which was maintained for at least 4 weeks. Diffusion was the dominant release mechanism of gentamicin from cross-linked SPI films. Appropriate selection of the process parameters yielded SPI wound dressings with the desired mechanical and physical properties and drug release behavior to protect against bacterial infection. These unique structures are thus potentially useful as burn and ulcer dressings.

Novel soybean/gelatine-based bioactive and injectable hydroxyapatite foam: material properties and cell response

Despite their known osteoconductivity, clinical use of calcium phosphate cements is limited both by their relatively slow rate of resorption and by rheological properties incompatible with injectability. Bone in-growth and material resorption have been improved by the development of porous calcium phosphate cements. However, injectable formulations have so far only been obtained through the addition of relatively toxic surfactants. The present work describes the response of osteoblasts to a novel injectable foamed bone cement based on a composite formulation including the bioactive foaming agents soybean and gelatine. The foaming properties of both defatted soybean and gelatine gels were exploited to develop a self-hardening soy/gelatine/hydroxyapatite composite foam able to retain porosity upon injection. After setting, the foamed paste produced a calcium-deficient hydroxyapatite scaffold, showing good injectability and cohesion as well as interconnected porosity after injection. The intrinsic bioactivity of soybean and gelatine was shown to favour osteoblast adhesion and growth. These findings suggest that injectable, porous and bioactive calcium phosphate cements can be produced for bone regeneration through minimally invasive surgery.

Chitosan improves the biological performance of soy-based biomaterials

Soybean protein has been proposed for distinct applications within nutritional, pharmaceutical, and cosmetic industries among others. More recently, soy-based biomaterials have also demonstrated promising properties for biomedical applications. However, although many reports within other fields exist, the inflammatory/immunogenic potential of those materials is still poorly understood and therefore can hardly be controlled. On the contrary, chitosan (Cht) has been well explored in the biomedical field, either by itself or combined with synthetic or other natural-based polymers. Therefore, the combination of chitosan with soybean protein is foreseen as a suitable approach to control the biological behavior of soy-based biomaterials. Under this context this work was designed to try to understand the influence of chitosan in the host response elicited by soy-based biomaterials. Soybean protein isolate powder (SI-P) and Cht powder (Cht-P) were injected as suspension into the intraperitoneal cavity of rats. SI-P induced the recruitment of higher numbers of leukocytes compared to the Cht-P during the entire observation period. In this sense, SI-P elicited a considerable reaction from the host comparing to the Cht-P, which elicited leukocyte recruitment similar to the negative control. After subcutaneous implantation of the soybean and denatured membranes, (SI-M and dSI-M) a severe host inflammatory reaction was observed. Conversely, Cht/soy-based membranes (Cht/soy-based membranes) showed the induction of a normal host response after subcutaneous implantation in rats, which allowed concluding that the addition of chitosan to the soy-based membranes improved their in vivo performance. Thus, the presented results assert the improvement of the host response, considering inflammatory cells recruitment, and overall inflammatory reaction, when chitosan is combined to soybean. Together with previous results that reported their promising physicochemical characteristics and their inability to activate human polymorphonuclear neutrophils in vitro, the herein presented conclusions reinforce the usefulness of the Cht/soy-based membranes and justify the pursue for a specific application within the biomedical field.

Drug sorption onto and release from soy protein fibers

Drug release in phosphate buffered saline (PBS pH 7.4) and artificial gastric juice (AGJ pH 1.2) and its relationship with kinetic and thermodynamic parameters of drug sorption onto soy protein (SP) fibers have been studied using Diclofenac, 5 Fluorouracil and Metformin as model drugs. Since SP is biodegradable, biocompatible, abundant and annually renewable, it has been widely used in medical applications. To understand drug release from SP fibers using sorption, kinetic and thermodynamic parameters have been investigated. Quantitative relationship between drug release and drug loading concentration, affinity, and activation energy for diffusion was established to predict initial bursts and later drug release. The study showed that Diclofenac had high initial bursts in PBS but more constant release in AGJ. It also has been found that drugs with lower diffusion coefficient and higher affinity (especially van der Waals force) on SP fiber are more suitable for sorption loading to achieve higher loading capacity and more constant releasing rate.