Ray-Tracing Customization in Myopic and Myopic Astigmatism LASIK Treatments for Low and High Order Aberrations Treatment: 2-Year Visual Function and Psychometric Value Outcomes of a Consecutive Case Series

Purpose

The safety and long-term efficacy of automated ray-tracing customized myopic and myopic astigmatic femtosecond laser-assisted LASIK.

Methods

This consecutive case series retrospective analysis, of 20 subjects (40 eyes) treated with automated raytracing named Wavelight Plus, to include low and high order aberrations based on a three-dimensional custom virtual eye for each case-calculated from interferometry data-obtained from a single diagnostic device that also provides Hartman-Shack Wavefront and Scheimpflug tomography data. We evaluated before and after the customized LASIK procedure: visual acuity, refractive error, high order aberrations, contrast sensitivity, and psychometric post-operative visual function data.

Results

At 24 months, the comparison of the pre-operative to the post-operative refractive and visual function value changes in average were: subjective manifest refraction from -4.38 ± 2.54 diopters (D) (range -9.75 to -1.25 D) to +0.11 ± 0.19 D; subjective manifest refractive astigmatism from -0.76 ± 0.91 D (range -2.75 to 0 D) to -0.13 ± 0.16 D, corneal astigmatism from -1.16 ± 0.64 D (range -0.2 to -2.8) to -0.47 ± 0.11 D. 65% of the eyes studied demonstrated an increase of at least one line of vision, while from the same group 38% demonstrated 2 lines of increase. High order aberrations, contrast sensitivity as well as the subjective psychometric input based on the VFQ-25 questionnaire demonstrated actual improvement.

Conclusion

This longer-term follow-up, single-arm retrospective consecutive case series documents LASIK treatment customization that appears to be safe and effective in the correction of myopia and myopic astigmatism. Markedly improved objective and subjective visual function post-operatively, underlying the potential importance of simultaneously attempting to correct high order aberrations and improving the spatial alignment of total, measured human eye optics.

Mechanisms of corneal intrastromal laser dissection for refractive surgery: ultra-high-speed photographic investigation at up to 50 million frames per second

Every year, more than a million refractive eye surgeries using femtosecond lasers are performed but the intrastromal cutting process remains an area of development. We investigated the mechanisms of laser dissection in cornea by ultra-high-speed photography. We found that the intrastromal bubble forms multiple lobes along the elongated laser plasma and the overlying lobes expand along the corneal lamellae. Videography demonstrated that the cutting process relies on crack propagation in the stroma along the bubble lobes with the crack originating from the pre-existing bubble layer. These insights are important for further improvement of the cutting mechanisms in refractive surgery.

Topography-Guided Femto-LASIK in Virgin Eyes: Treating Manifest versus Measured Astigmatism

Purpose

To assess the stability, safety, predictability, and efficacy of topography-guided myopic Femto-LASIK with two different treatment protocols.

Setting

Ebsar Eye center, Benha, Qalyopia, Egypt.

Design

Single-center, retrospective, COHORT control study.

Methods

A total of 330 eyes enrolled in the study in group A and 322 eyes enrolled in group B underwent uncomplicated primary bilateral topography-guided Femto-LASIK. Group A was treated with the subjective clinical refraction; however, group B was treated with the modified refraction according to ALCON protocol.

Results

The mean preoperative refractive spherical equivalent (MRSE) was −4.85±1.90D and −5.0±1.93D in group A and B, respectively (P = 0.86), and a cylinder of −0.95±0.80 D and −0.92±0.81D, respectively. At the 12 months’ postoperatively, the residual manifest SE within ± 0.5D was achieved by 82.86% of eyes in group A compared to 83.93% in group B. Of eyes, 92.06% had ≤0.5 astigmatism dioptre, while 100% of eyes had ≤1.0 astigmatism dioptre in group A (315 eyes); however, 91.80% of eyes had ≤0.5 astigmatism dioptre, while 100% of eyes had ≤1.0 astigmatism dioptre in group B.

Conclusion

Topographic modification of the magnitude and axis of astigmatism treated using ALCON protocol when different from the clinical refraction may offer good refractive outcomes when we apply the Alcon precalculation considerations.

Initial Outcomes with Customized Myopic LASIK, Guided by Automated Ray Tracing Optimization: A Novel Technique

Purpose

Safety and efficacy of a novel automated ray tracing optimization in customization of excimer ablation in myopic LASIK.

Methods

In a consecutive case series, 25 patients (50 eyes) undergoing femtosecond-laser-assisted myopic LASIK were evaluated. The novel, artificial-intelligence platform initially calculates the ablation profile based on a model eye for each case, based on interferometry axial length data. Low- and high-order aberration calculation is performed by raytracing based on wavefront and Scheimpflug tomography measurements, all from a single diagnostic device. Visual acuity, refractive error, keratometry, topography, high-order aberrations and contrast sensitivity were evaluated, over six months follow-up.

Results

Change from pre- to 6 months post-operative: mean refractive error improved from −5.06 ± 2.54 diopters (D) (range −8.0 to −0.50 D) to −0.11 ± 0.09 D (range −0.25 to + 0.25); refractive astigmatism from −1.07 ± 0.91 D (range −4.25 to 0 D) to −0.15 ± 0.04 D (range −0.25 to 0); and topographic astigmatism from −1.65 ± 0.85 D to −0.26 ± 0.11 D (range −0.60 to 0). About 65% of eyes gained one line of vision and 38% 2 lines. Pre- to post-operative high-order aberration average: RMSh changed from 0.25 um to 0.35 um. Contrast sensitivity improved post-operatively.

Conclusion

We report safe and effective preliminary outcomes with a novel excimer laser customization by ray tracing optimization, for myopic LASIK treatments, employing several independent up-till-now diagnostics and a customized eye model reference for each case. It bears the potential advantage through total eye aberration data and ray tracing refraction calculation to offer improved and more predictable visual outcomes.

Point your SmartPhone at the code above. If you have a QR code reader the video abstract will appear. Or use:

https://youtu.be/D9pRQDAcjLg

Corneal thickening and central flattening induced by femtosecond laser hyperopic-shaped intrastromal lenticule implantation

PURPOSE

To investigate the feasibility of the procedure and the modifications of the corneal curvature and profile obtained with a novel technique of stromal-lentoid implantation in ex vivo human corneas.

DESIGN

Experimental ex vivo study in human corneas.

MATERIALS AND METHODS

Twelve stromal lentoids were produced by means of hyperopic femtosecond lenticule extraction (FLEx) with the VisuMax femtosecond laser (Carl Zeiss Meditec, Jena, Germany) with a refractive power of +8.00 D and optical zone of 6.0 (six lenticules) and 5.0 mm (six lenticules), respectively. The posterior surface of these stromal lentoids presented a higher curvature with respect to the anterior surface and, therefore, the thinnest point is located at the center of the lenticule, gradually thickening towards the periphery. Another 12 corneas underwent femtosecond laser intrastromal pocket creation at a depth of 115 microns, for lenticule insertion. After intrastromal lenticule implantation the changes of corneal profiles were evaluated by means of corneal topography and anterior segment optical coherence tomography (OCT).

RESULTS

The implantations of intrastromal lenticules were successful in all cases with proper distention and centration. A mid-peripheral forward shift of the anterior corneal surface along with a thickening (greater in periphery) was induced. There was a significant flattening of anterior corneal central areas of 7.31 ± 1.52 D (p = 0.002). Diameters of the flattening area were found to be consistently correlated with the optical zone diameter of the implanted lenticules (p = 0.006). Central flattening was similar in both groups. OCT pachymetry maps showed an increase of corneal thickness consistently correlated with implanted lentoid thickness and diameter.

CONCLUSION

The implantation of modified hyperopic-shaped intra-corneal stromal lentoid is a feasible and reproducible technique for achieving central corneal flattening while increasing thickness. Whether this procedure may be beneficial in the treatment of refractive errors or ectatic corneal disorders such as keratoconus merits further study.

Developments in the correction of presbyopia II: surgical approaches

PURPOSE

To discuss the various static and dynamic surgical approaches which attempt to give presbyopes good vision at far, intermediate and near viewing distances.

CONTENT

Static methods broadly adopt the same optical techniques as those used in presbyopic contact lens correction and aim to satisfy the needs of the presbyope by increasing binocular depth-of-focus, often using monovision as well as simultaneous-imagery. Dynamic methods generally attempt to make use of at least some of the still-active elements of the accommodation system. They include procedures which are supposed to modify the relative geometry of the ciliary muscle and lens, or which reduce the stiffness of the presbyopic lens either by replacing it with other natural or man-made material or by subjecting it to femtosecond laser treatment. Alternatively the natural lens may be replaced by some form of intraocular lens which changes power as a result of forces derived from the still-active ciliary muscle, zonule and capsule, or other sources.

CONCLUSIONS

At present, multifocal intraocular lenses appear to offer the most consistent and reliable surgical approach to surgical presbyopic correction. They have obvious advantages in convenience and stability over optically-similar, simultaneous-image presbyopic contact lenses but this must be balanced against their relative inflexibility in cases of patient dissatisfaction. Dynamic methods remain largely experimental. Although some approaches show promise, as yet no method has demonstrated a reliable, long-term ability to correct distance refractive error and to appropriately change ocular power in response to changes in viewing distance over the normal range of interest.

The journey to femtosecond laser-assisted cataract surgery: new beginnings or a false dawn?

Femtosecond laser-assisted cataract surgery (FLACS) represents a potential paradigm shift in cataract surgery, but it is not without controversy. Advocates of the technology herald FLACS as a revolution that promises superior outcomes and an improved safety profile for patients. Conversely, detractors point to the large financial costs involved and claim that similar results are achievable with conventional small-incision phacoemulsification. This review provides a balanced and comprehensive account of the development of FLACS since its inception. It explains the physiology and mechanics underlying the technology, and critically reviews the outcomes and implications of initial studies. The benefits and limitations of using femtosecond laser accuracy to create corneal incisions, anterior capsulotomy, and lens fragmentation are explored, with reference to the main platforms, which currently offer FLACS. Economic considerations are discussed, in addition to the practicalities associated with the implementation of FLACS in a healthcare setting. The influence on surgical training and skills is considered and possible future applications of the technology introduced. While in its infancy, FLACS sets out the exciting possibility of a new level of precision in cataract surgery. However, further work in the form of large scale, phase 3 randomised controlled trials are required to demonstrate whether its theoretical benefits are significant in practice and worthy of the necessary huge financial investment and system overhaul. Whether it gains widespread acceptance is likely to be influenced by a complex interplay of scientific and socio-economic factors in years to come.