Effect of drying method on mechanical, thermal and water absorption properties of enzymatically crosslinked gelatin hydrogels

Study on chitosan/gelatin hydrogels containing ceria nanoparticles for promoting the healing of diabetic wound

Chronic inflammation at diabetic wound sites results in the uncontrolled accumulation of pro-inflammatory factors and reactive oxygen species (ROS), which impedes cell proliferation and delays wound healing. To promote the healing of diabetic wounds, chitosan/gelatin hydrogels containing ceria nanoparticles (CNPs) of various sizes were created in the current study. CNPs' efficacy in removingO 2 • - , •OH, and H2O2 was demonstrated, and the scavenging ability of CNPs of varying sizes was compared. The in vitro experiments demonstrated that hydrogels containing CNPs could effectively protect cells from ROS-induced damage and facilitate mouse fibroblast migration. Furthermore, during the treatment of diabetic wounds in vivo, hydrogels containing CNPs exhibited anti-inflammatory activity and could reduce the expression of the pro-inflammatory factors TNF-α (above 30%), IL-6 (above 90%), and IL-1β (above 80%), and effectively promote wound closure (above 80%) by inducing re-epithelialization, collagen deposition, and angiogenesis. In addition, the biological properties and therapeutic effects of hydrogels containing CNPs of various sizes were compared and discussed. The finding revealed that hydrogels with 4 nm CNPs exhibited more significant biological properties and had implications for diabetic wound treatment.

Bacteria-Polymer Composite Material for Glycerol Valorization

Bacterial immobilization is regarded as an enabling technology to improve the stability and reusability of biocatalysts. Natural polymers are often used as immobilization matrices but present certain drawbacks, such as biocatalyst leakage and loss of physical integrity upon utilization in bioprocesses. Herein, we prepared a hybrid polymeric matrix that included silica nanoparticles for the unprecedented immobilization of the industrially relevant Gluconobacter frateurii (Gfr). This biocatalyst can valorize glycerol, an abundant by-product of the biodiesel industry, into glyceric acid (GA) and dihydroxyacetone (DHA). Different concentrations of siliceous nanosized materials, such as biomimetic Si nanoparticles (SiNps) and montmorillonite (MT), were added to alginate. These hybrid materials were significantly more resistant by texture analysis and presented a more compact structure as seen by scanning electron microscopy. The preparation including 4% alginate with 4% SiNps proved to be the most resistant material, with a homogeneous distribution of the biocatalyst in the beads as seen by confocal microscopy using a fluorescent mutant of Gfr. It produced the highest amounts of GA and DHA and could be reused for up to eight consecutive 24 h reactions with no loss of physical integrity and negligible bacterial leakage. Overall, our results indicate a new approach to generating biocatalysts using hybrid biopolymer supports.

An Appraisal of pH triggered Bacitracin drug release, through composite hydrogel systems

Comparative investigations on environmentally triggered drug delivery and wound healing characteristics of flexible hydrogel composites, Chitosan-Gelatin (C/G) and 2-Hydroxyethyl Methacrylate-Gelatin (H/G); are presented here. These composites, prepared through facile synthesis and curing methods, indicate the potential to smartly respond to the pH changes in wounds by releasing drug simultaneously and aiding in faster healing. An in-vitro investigation of the composite characteristics were included testing for Equilibrium Water Capacity Studies, Fourier Transform Infrared Spectroscopy (FTIR) investigations as well as UV based drug release and gravimetric hydrogel degradation profiles. This was followed by cutaneous application testing of the hydrogel systems in balb-c mice. Observations and testing results indicated the potential applicability of the hydrogel systems as dressings for topical/transdermal applications, provided that further detailed in-vivo characteristics are accounted for.

Synthesis, modification and application of fish skin gelatin-based hydrogel as sustainable and versatile bioresource of antidiabetic peptide

Gelatin hydrogel is widely employed in various fields, however, commercially available gelatin hydrogels are mostly derived from mammalian which has many disadvantages due to the supply and ethical issues. In this study, the properties of hydrogels from fish-derived collagen fabricated with varying Glutaraldehyde (GA) determined. The antidiabetic properties of salmon gelatin (SG) and tilapia gelatin (TG) was also evaluated against α-glucosidase. Glutaraldehyde-crosslinked salmon gelatin and tilapia gelatin were used, and compared with different concentrations of GA by 0.05 %, 0.1 %, and 0.15 %. Water absorbency, swelling, porosity, pore size and water retention of the hydrogels were dependent on the degree of crosslinking. The synthesis of hydrogels was confirmed by FTIR study. Scanning electron microscope (SEM) observation showed that all hydrogels have a porous structure with irregular shapes and heterogeneous morphology. Performance tests showed that gelatin-GA 0.05 % mixture had the best performance. Antidiabetic bioactivity in vitro and in silico tests showed that the active peptides of SG and TG showed a high binding affinity to α-glucosidase enzyme. In conclusion, SG and TG cross-linked GA 0.05 % have the potential as an antidiabetic agent and as a useful option over mammalian-derived gelatin.

Partial sulfation of gellan gum produces cytocompatible, body temperature-responsive hydrogels

Gellan gum (GG) is a biodegradable polysaccharide and forms thermosensitive hydrogels by a helix-mediated mechanism. Unfortunately, the wide use of GG in tissue engineering has been restricted due to its dramatically higher gelation temperature than normal body temperature. Here, we show that partial sulfation of GG affords a cytocompatible body temperature-responsive hydrogel with an interesting thermoreversibility at 42 °C. The partial sulfation of GG was confirmed by FTIR, EDX and elemental analyses. The sulfated GGs (SGGs) had a higher swelling ratio and degradation in PBS compared to the neat GG. Based on the results of rheometry analysis, the SGG with a degree of sulfation of 0.27 (H3 sample) showed a gelation temperature close to the physiological temperature. In addition, the drop in mechanical properties of SGGs was compensated by a further calcium-mediated ionic crosslinking, where Young's modulus of H3 increased from 10.6 ± 1.9 kPa up to 38.4 ± 5.5 kPa. Finally, we showed that the partial sulfation reaction of GG is a simple and mild strategy to modify chemical structure of GG, and to produce a cytocompatible, body temperature-responsive hydrogel compared to other modifying reactions such as oxidation reaction.

Influence of Cross-Linking Conditions on Drying Kinetics of Alginate Hydrogel

Hydrogels are three-dimensional cross-linked polymeric networks capable of a large amount of fluid retention in their structure. Hydrogel outputs manufactured using additive manufacturing technologies are exposed to water loss, which may change their original shape and dimensions. Therefore, the possibility of retaining water is important in such a structure. In this manuscript, kinetic analysis of water evaporation from sodium alginate-based hydrogels exposed to different environmental conditions such as different temperatures (7 and 23 °C) and ambient humidity (45, 50 and 95%) has been carried out. The influence of the cross-linking method (different calcium chloride concentration-0.05, 0.1 and 0.5 M) of sodium alginate and cross-linking time on the water loss was also considered. Studies have shown that a decrease in the temperature and increase in the storage humidity can have a positive effect on the water retention in the structure. The storage conditions that led to the least weight and volume loss were T 7 °C and 95% humidity. These experiments may help in selecting the appropriate hydrogel preparation method for future applications, as well as their storage conditions for minimum water loss and, consequently, the least change in dimensions and shape.

Use of Hydrogels to Regulate Orthodontic Tooth Movement in Animal Models: A Systematic Review

The objective of this article is to conduct a systematic review of the literature to contrast the existing evidence regarding the use of hydrogels during and after experimental orthodontic treatment in animals. An extensive search was performed through the electronic databases, Medline, Web of Science and Scopus, from December 2020 to April 2021 for in vivo animal studies. A total of 282 studies were reviewed. Eight studies were included for final revision; four studies were conducted in rats, two in rabbits, one study in mice and one study in guinea pigs. The quality assessment of the eight included studies was performed according to the ARRIVE guidelines and the risk of bias was assessed using the Center for Systematic Review of Laboratory Animal Experimentation tool; in four of the eight articles evaluated, a high risk-of-bias rating was obtained in 40% of the criteria evaluated. In the studies reviewed, the hydrogel acted as a carrier, and inhibition (post-treatment retention) or acceleration of orthodontic tooth movement was assessed according to the active substance used in each of the articles. The uses of hydrogels for transporting active substances to regulate the rate of orthodontic tooth movement remains debatable. Future studies are suggested to evaluate the feasibility of hydrogel as a transport method in humans.

Marrying the incompatible for better: Incorporation of hydrophobic payloads in superhydrophilic hydrogels

HYPOTHESIS

The entrapment of lyophobic in superhydrophilic hydrogels is challenging because of the intrinsic incompatibility between hydrophobic and hydrophilic molecules. To achieve such entrapment without affecting the hydrogel's formation, the electrospinning of nanodroplets or nanoparticles with a water-soluble polymer could reduce the incompatibility through the reduction of interfacial tension and the formation of a barrier film preventing coalescence or aggregation.

EXPERIMENTS

Nanodroplets or nanoparticles dispersion are electrospun in the presence of a hydrophilic polymer in hydrogel precursors. The dissolution of the hydrophilic nanofibers during electrospinning allows a redispersion of emulsion droplets and nanoparticles in the hydrogel's matrix.

FINDINGS

Superhydrophilic hydrogels with well-distributed hydrophobic nanodroplets or nanoparticles are obtained without detrimentally imparting the viscosity of hydrogel's precursors and the mechanical properties of the hydrogels. Compared with the incorporation of droplets without electrospinning, higher loadings of hydrophobic payload are achieved without premature leakage. This concept can be used to entrap hydrophobic agrochemicals, drugs, or antibacterial agents in simple hydrogels formulation.

Current hydrogel advances in physicochemical and biological response-driven biomedical application diversity

Hydrogel is a type of versatile platform with various biomedical applications after rational structure and functional design that leverages on material engineering to modulate its physicochemical properties (e.g., stiffness, pore size, viscoelasticity, microarchitecture, degradability, ligand presentation, stimulus-responsive properties, etc.) and influence cell signaling cascades and fate. In the past few decades, a plethora of pioneering studies have been implemented to explore the cell-hydrogel matrix interactions and figure out the underlying mechanisms, paving the way to the lab-to-clinic translation of hydrogel-based therapies. In this review, we first introduced the physicochemical properties of hydrogels and their fabrication approaches concisely. Subsequently, the comprehensive description and deep discussion were elucidated, wherein the influences of different hydrogels properties on cell behaviors and cellular signaling events were highlighted. These behaviors or events included integrin clustering, focal adhesion (FA) complex accumulation and activation, cytoskeleton rearrangement, protein cyto-nuclei shuttling and activation (e.g., Yes-associated protein (YAP), catenin, etc.), cellular compartment reorganization, gene expression, and further cell biology modulation (e.g., spreading, migration, proliferation, lineage commitment, etc.). Based on them, current in vitro and in vivo hydrogel applications that mainly covered diseases models, various cell delivery protocols for tissue regeneration and disease therapy, smart drug carrier, bioimaging, biosensor, and conductive wearable/implantable biodevices, etc. were further summarized and discussed. More significantly, the clinical translation potential and trials of hydrogels were presented, accompanied with which the remaining challenges and future perspectives in this field were emphasized. Collectively, the comprehensive and deep insights in this review will shed light on the design principles of new biomedical hydrogels to understand and modulate cellular processes, which are available for providing significant indications for future hydrogel design and serving for a broad range of biomedical applications.

Rheological Characterization of Chapatti (Roti) Enriched with Flour or Paste of House Crickets (Acheta domesticus)

Addition of edible insects to food products may improve the nutritional status but can also influence their techno-functional properties. This study investigates the impact of supplementing wheat flour by cricket flour or paste at different levels (5–15%) on the rheological and textural properties of flour, dough, and baked chapatti. Addition of freeze-dried cricket flour resulted in the highest water absorption. The storage modulus increased at higher level (10–15%) of supplementation to wheat flour indicating an increased dough consistency. Similarly, biaxial extension of the dough showed an increased resistance to extension and decreased extensibility at higher level of supplementation due to a reduced strength of the gluten network. Uniaxial extension of baked chapatti showed less extensible and harder chapatti with the addition of a higher amount of cricket flour or paste. At lower level (5%), incorporation of cricket flour resulted in chapatti with textural properties comparable to the reference. Oven dried cricket powder is suggested as the best option for incorporating in chapatti dough to improve food security in Asian Countries.

Physical and chemical characteristics of Asian sea bass bio-calcium powders as affected by ultrasonication treatment and drying method

The effects of ultrasonication and drying method on particle size and other product characteristics of bio-calcium powder from Asian sea bass (Lates calcarifer) backbone were investigated. Ultrasonication was performed at different amplitudes (60%, 70%, and 80%) for varying periods (15 and 30 min). Ultrasonication at higher amplitudes for a longer time reduced the powder particle size more effectively (p < .05), but had no impact on zeta potential (p > .05). The bio-calcium powder ultrasonicated at 70% amplitude for 15 min had the smallest particle size (3.38 µm) when compared to the control (28.85 µm). When the ultrasonicated bio-calcium was subjected to drying, freeze-drying produced powders with higher calcium solubility but lower whiteness than hot air (tray) drying. The results suggest that the ultrasonication is a potential suitable method to reduce the size of bio-calcium powders, while the drying method slightly affected the product characteristics. The bio-calcium powder could serve as a suitable functional ingredient for food fortification aimed at improving the calcium bioavailability. Particle size of bio-calcium powder from fishbone could affect the mouth feel and calcium solubility when used for food product fortification. This work showed that ultrasonication could be used to obtain up to 10-fold reduction in the particle size of fishbone bio-calcium powders, which promotes increased calcium solubility when subjected to simulated gastrointestinal tract digestion. Few differences in characteristics of the bio-calcium powder were observed for freeze-dried and hot air-dried samples. Thus, an economical, safe, and fast process can be implemented for the production of small particle size bio-calcium powder from fishbone.

Tailoring swelling of alginate-gelatin hydrogel microspheres by crosslinking with calcium chloride combined with transglutaminase

Alginate-based hydrogels can find uses in a wide range of applications, including in the encapsulation field. This type of hydrogels is usually ionically crosslinked using calcium sources giving rise to products with limited internal crosslinking. In this work, it is hypothesized that the combination of alginate crosslinked by calcium chloride (external crosslinking; ionic mechanism) with gelatin crosslinked by transglutaminase (internal crosslinking; enzymatic induced mechanism) can be used to tailor the swelling behavior of alginate-based hydrogel microspheres. A systematic study was conducted by covering process variables such as gelatin content, TGase concentration, and CaCl₂ contact time, added by statistic tools as central composite rotatable design (CCRD), principal component analysis (PCA) and multiobjective optimization, to map their effect on the resulting water content after production (expressed as swelling ratio), and swelling properties at pH 3 and 7. Among the studied variables, particle's swelling was mostly affected by the gelatin content and transglutaminase concentration.

Polymeric electrospun scaffolds for bone morphogenetic protein 2 delivery in bone tissue engineering

HYPOTHESIS

The development of novel scaffolds based on biocompatible polymers is of great interest in the field of bone repair for fabrication of biodegradable scaffolds that mimic the extracellular matrix and have osteoconductive and osteoinductive properties for enhanced bone regeneration.

EXPERIMENTS

Polycaprolactone (PCL) and polycaprolactone/polyvinyl acetate (PCL/PVAc) core-shell fibers were synthesised and decorated with poly(lactic-co-glycolic acid) [PLGA] particles loaded with bone morphogenetic protein 2 (BMP2) by simultaneous electrospinning and electrospraying. Hydroxyapatite nanorods (HAn) were loaded into the core of fibers. The obtained scaffolds were characterised by scanning and transmission electron microscopy, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. The in vitro potential of these materials for bone regeneration was assessed in biodegradation assays, osteoblast viability assays, and analyses of expression of specific bone markers, such as alkaline phosphatase (ALP), osteocalcin (OCN), and osteopontin (OPN).

FINDINGS

PLGA particles were homogeneously distributed in the entire fibre mat. The growth factor load was 1.2-1.7 μg/g of the scaffold whereas the HAn load was in the 8.8-12.6 wt% range. These scaffolds were able to support and enhance cell growth and proliferation facilitating the expression of osteogenic and osteoconductive markers (OCN and OPN). These observations underline the great importance of the presence of BMP2 in scaffolds for bone remodelling as well as the good potential of the newly developed scaffolds for clinical use in tissue engineering.