Effects of calcium hydroxide addition on the physical and chemical properties of a calcium silicate-based sealer

Histologic Assessment of a Fast-Set Mineral Trioxide Aggregate (MTA) and Two Novel Antibacterial-Enhanced Fast-Set MTAs for Apexification and Periapical Healing of Teeth With Incomplete Root Formation in a Rat Model: An In Vivo Animal Study

Background Pulp necrosis in incomplete root formation halts dentine development, resulting in larger canals with fragile walls and an open apex, complicating canal instrumentation and apical stop formation. Bioactive endodontic cements such as mineral trioxide aggregate (MTA) are crucial for creating artificial apical barriers or inducing apical foramen closure, but challenges remain regarding their antimicrobial efficacy and cytotoxicity. Modifications to MTA formulations aim to address these concerns. Methods This in vivo animal study involved 80 Wistar albino rats, with incomplete root formation induced by pulp exposure. Rats were divided into four groups receiving different MTA formulations for apexification: conventional MTA, modified MTA, and MTA enhanced with metronidazole or doxycycline. Histopathological evaluations were conducted at seven and 28 days post-treatment to assess calcific barrier formation, inflammatory reactions, and antimicrobial efficacy. Results By day 7, modified MTA formulations exhibited enhanced antibacterial activity compared to conventional MTA (p = 0.000), with fewer inflammatory reactions and microorganisms. By day 28, modified formulations showed superior calcific barrier formation, particularly in the metronidazole- and doxycycline-enhanced groups compared to conventional MTA (p = 0.000). These outcomes suggest that modifications to MTA formulations improve antimicrobial efficacy and calcific barrier formation in vivo. Conclusion Novel modified MTA formulations, particularly those enhanced with metronidazole or doxycycline, exhibit superior antibacterial efficacy and calcific barrier formation compared to conventional MTA. Further long-term studies are warranted to validate these findings for potential clinical translation.

Comparative Evaluation of Push-Out Bond Strength of Conventional Mineral Trioxide Aggregate, Biodentine, a Modified Mineral Trioxide Aggregate, and Two Novel Antibacterial-Enhanced Mineral Trioxide Aggregates

Background The challenges associated with incorporating antimicrobial agents, such as the potential diminishment of the cement's physical properties, highlight the need for comprehensive evaluations. Balancing antimicrobial efficacy with the maintenance of structural integrity is a crucial aspect of material development. The acknowledgment of cytotoxic properties associated with tricalcium aluminate, a major constituent in conventional mineral trioxide aggregate (MTA), is critical in terms of long-term evaluation of treatment procedures. The primary focus of the push-out test is to evaluate the resistance of the tested material to dislodgement. Greater push-out strength implies stronger adhesion between the tested material and the tooth surface. Aim This study aims to evaluate the push-out bond strength of two antibacterial-enhanced MTAs with conventional MTA and Biodentine. Material and methods A total of five materials were tested: a) modified MTA, b) doxycycline-enhanced MTA, c) metronidazole-enhanced MTA, d) conventional MTA, and e) Biodentine. All the materials were mixed based on a predetermined powder:liquid ratio and then carried using a plastic instrument to the desired experimental design. Single-rooted permanent teeth, preferably incisors, were used in the present study. Teeth were embedded vertically in a rubber mold, and sectioning of the tooth was performed. A single operator instrumented the canal space in each slice using Gates-Glidden burs, and the mixed cements were placed in the respective groups and stored for 72 hours. A push-out test was carried out using a universal testing machine. Following the bond failure, the slices were examined under a stereomicroscope to determine the nature of the bond failure. The collected data was subjected to a one-way analysis of variance test, post hoc test, and chi-square test for statistical analysis. Results The mean push-out bond strength was found to be the highest for Biodentine (43.25 ± 0.62 megapascals (MPa)), followed by doxycycline- and metronidazole-enhanced MTAs (39.54 ± 0.65 MPa and 39.29 ± 0.16 MPa, respectively), modified MTA formulation (37.75 ± 0.73 MPa), and the lowest for conventional MTA (25.93 ± 0.7 MPa). Conventional MTA samples had an adhesive failure (89.4%), while Biodentine samples had a cohesive failure (80.3%). Mixed failures were noticed with the samples containing modified MTA formulation (71.3%), doxycycline-enhanced MTA (76.6%), and metronidazole-enhanced MTA (78.0%). Conclusion Despite not surpassing Biodentine in bond strength, antibacterial-enhanced MTAs are considered potential alternatives to conventional MTA in day-to-day clinical practice.

Comparative Evaluation of Push-out Bond Strength of Conventional Mineral Trioxide Aggregate, Biodentine, and Two Novel Antibacterial-enhanced Mineral Trioxide Aggregates

AIM

To evaluate the push-out bond strength of two newly modified mineral trioxide aggregates (MTAs) with conventional MTA and biodentine.

MATERIALS AND METHODS

Material preparation: Two commercially available bioactive bioceramics: Group I: Mineral trioxide aggregate; Group II: Biodentine; and two newly formulated modified MTAs: Group III: Doxycycline incorporated MTA formulation; Group IV: Metronidazole incorporated MTA formulation was used in the present study. All the test materials were then carried using a plastic instrument to the desired experimental design. Teeth sample preparation: A total of 120 teeth samples were collected and divided into four groups of test materials with 30 teeth samples per group. Single-rooted permanent teeth, that is, incisors were collected and stored in saline until the study was performed. Sectioning of the teeth into 2.0 ± 0.05-mm thick slices was performed perpendicular to the long axis of the tooth. The canal space was instrumented using Gates Glidden burs to achieve a diameter of 1.5 mm. All four prepared materials were mixed and placed in the lumen of the slices and placed in an incubator at 37°C for 72 hours. Push-out test and bond failure pattern evaluation: The push-out test was performed using a universal testing machine. The slices were examined under a scanning electron microscope (SEM) at 40× magnification to determine the nature of bond failure. All the collected data were recorded and statistically analyzed.

RESULTS

The mean push-out bond strength was found to be the highest for group II (37.38 ± 1.94 MPa) followed by group III (28.04 ± 2.22 MPa) and group IV (27.83 ± 1.34 MPa). The lowest mean push-out bond strength was noticed with group I (22.89 ± 2.49 MPa). This difference was found to be statistically significant (p = 0.000). Group I samples had the predominantly adhesive type of failure (86.4%), while group II samples showed the cohesive type of failure (94.2%). Both the modified MTAs (groups III and IV) primarily showed mixed types of failures.

CONCLUSION

Both the antibacterial-enhanced MTAs had better pushout bond strength compared to conventional MTA but did not outperform biodentine. Hence, it could serve as a substitute for conventional MTA due to its augmented physical properties.

CLINICAL SIGNIFICANCE

Carious pulp exposure and nonvital open apices pose a critical challenge to pediatric dental practitioners. In such circumstances, maintaining the vitality of pulp and faster healing would help in a better prognosis. Novel MTAs without any cytotoxic components, and enhanced antibacterial contents with augmented physical properties can help in treating such clinical conditions. How to cite this article: Merlin ARS, Ravindran V, Jeevanandan G, et al. Comparative Evaluation of Push-out Bond Strength of Conventional Mineral Trioxide Aggregate, Biodentine, and Two Novel Antibacterial-enhanced Mineral Trioxide Aggregates. J Contemp Dent Pract 2024;25(2):168-173.

The Cytotoxic Assessment of Antibacterial-Enhanced Mineral Trioxide Aggregate Compared to Commercially Available Bioceramic Cements by Using Methyl-Thiazoldiphenyl-Tetrazolium (MTT) Assay on Human Dental Pulp Stem Cells: An In Vitro Study

Background and objective Preserving the vitality of the tooth is of prime significance during therapies such as direct pulp capping and pulpotomy that promote tertiary dentine formation and healing of pulp stumps. Procedures like apexogenesis and apexification also stimulate dentin and bone formation for root growth and closure. Conventional mineral trioxide aggregate (MTA) has good biocompatible and physical properties like longer setting time, presence of a cytotoxic component, i.e., tricalcium aluminate (TCA), moderate compressive strength, and moderate antimicrobial activity. Eliminating TCA and the addition of antibacterial components would improve the properties of the cement. In this study, we aimed to assess the cytotoxicity of MTA Angelus, Biodentine, and two antibacterial-enhanced MTAs by using methyl-thiazoldiphenyl-tetrazolium (MTT) assay. Materials and methods Human dental pulp was extirpated from extracted third molars, and human dental pulp stem cells (HDPSCs) were isolated and characterized by flow cytometry. HDPSCs were treated with MTA, Biodentine, or two antibacterial-enhanced MTAs depending on the study group. The control group constituted the untreated HDPSCs. The cell viability of HDPSCs was assessed using an MTT assay on days one, three, and seven. Results Varied levels of cytotoxicity were noticed at different time periods assessed using the tested materials, which was statistically significant (p=0.01). At all time periods assessed, the highest cell viability was noticed with Biodentine (88.7% on the first day, 80.4% on the third day, and 91.8% on the seventh day). Antibacterial-enhanced MTAs, either added with metronidazole or doxycycline, had more mean viable cells compared to conventional MTA on the third and seventh day (p=0.043 and 0.018 respectively). Conclusion Antibacterial-enhanced MTAs showed reduced cytotoxic properties when compared to conventional MTA. Biodentine was associated with the highest cell viability at all time periods.

Cleaning and microstructural effects of amyl acetate on pulp chamber dentin impregnated with epoxy resin-based endodontic sealer

OBJECTIVE

To evaluate the cleaning potential of 95% ethanol, acetone, and amyl acetate solutions used solely or in association, to remove epoxy resin-based sealer residues from pulp chamber dentin and their microstructural effects.

MATERIALS AND METHODS

One hundred and eighty bovine incisor specimens were divided into nine groups according to the cleaning protocol: ET (ethanol); AC (acetone); AA (amyl acetate); E1: AA+AC; E2: AA+ET; E3: AC+ET; E4: AA+AC+ET; PC (positive control), and NC (negative control). All groups were impregnated with epoxy resin-sealer, except NC. Ninety specimens were divided into groups (n = 10) for evaluation of persistence of residues and amount of open dentinal tubules by SEM analysis and evaluation of chemical compounds on the dentin surface after cleaning with electron dispersive spectroscopy. The others 90 specimens were submitted to Knoop microhardness evaluation. Persistence of residues data were submitted to the Kruskal Wallis and Dunn tests (α = 0.05). Open dentinal tubules and microhardness data were submitted to one-way ANOVA and Mann Whitney tests (α = 0.05).

RESULTS

AA and E4 protocols showed the lowest persistence of residues. E4 group had the highest incidence of open dentinal tubules. E3 and E4 groups showed no changes in the atomic ratio Ca/P, which was similar to NC group. E4 group did not present W, an element presents in all the other groups. ET and E4 protocols showed the smallest reduction in dentin microhardness.

CONCLUSIONS

The combination of amyl acetate, acetone and ethanol is the most effective and safe protocol to remove epoxy sealer residues on pulp chamber dentin. Moreover, it has the lowest microhardness reduction.

CLINICAL SIGNIFICANCE

The combined use of amyl acetate, acetone, and ethanol enhanced the cleaning of pulp chamber dentin with minimal microstructural damage.

Alkalizing potential and calcium release of residues from intracanal dressing containing calcium hydroxide

Abstract Introduction If the restoration, that seal the root canal from oral environment, failed or solubilize, the intracanal dressing could be partially removed, decreasing the efficiency of calcium hydroxide (CH). Objective To evaluate the alkalizing potential and calcium ions release of intracanal residues from different medications, in different periods. Materials and method Human incisors were endodontically instrumented and randomly divided (n=10). The root canals were filled with: G1⎯Calcium hydroxide (CH); G2⎯CH with 0.4% chlorhexidine digluconate (CHC); G3⎯CH with camphorated paramonochlorophenol and glycerin (HPG); G4⎯CH was maintained during all experiment, as positive control group (PC) and G5⎯ No medication was performed in the negative control group (NC). The specimens were immersed in distilled water for 7 days. The intracanal dressing was removed from the experimental groups using F1 instrument (Protaper). The teeth were stored in distilled water for 24 hours, 7, 14 and 28 days. pH value and calcium ions released were evaluated and the data were submitted to ANOVA one-way and Tukey tests. Result All experimental groups presented lower alkalizing potential and calcium ions release than PC (P<0.05). No significant difference was found among the experimental groups, regardless of the period (P>0.05). Conclusion The alkalizing potential and calcium ions release of residues from different intracanal dressing, in different periods, were similar and lower than the positive control group, that the medication was maintained inside the root canal, encouraging the replacement of intracanal dressing when the restoration fail.

Novel Fast-Setting Mineral Trioxide Aggregate: Its Formulation, Chemical-Physical Properties, and Cytocompatibility

One of the main drawbacks that limits the application of mineral trioxide aggregate (MTA) in dental field is its long setting time. Mineral trioxide aggregate with accelerated setting properties and excellent chemical-physical and biological properties is still required. In this study, an innovative mineral trioxide aggregate, which consists of calcium silicates, calcium aluminates, and zirconium oxide, was designed to obtain fast-setting property. The optimized formulation can achieve initial setting in 10 min and final setting in 15 min, which are much faster than commercial mineral trioxide aggregate. In addition, the optimized fast-setting MTA showed adequate radiopacity and good biocompatibility. The ion concentrations after storage in water for 1 day were 52.3 mg/L Ca, 67.7 mg/L Al, 48.8 mg/L Si, and 11.7 mg/L Mg. The hydration products of hardened cements were investigated by X-ray diffraction, scanning electron microscopy, and Fourier transform infrared, showing the accelerated setting time was due to the formation of honeycomb-like calcium silicate hydrate gel. The novel MTA could be a promising material for dental applications.