Lack of correlation between tubular dentine cement penetration, adhesiveness and leakage in roots filled with gutta percha and an endodontic cement based on epoxy amine resin

The use of sonic and ultrasonic activation of endodontic sealer to improve sealer filling quality in the root canal: a scoping review

This scoping review aimed to map whether the use of sonic and ultrasonic methods to activate the endodontic sealer improves the sealer filling quality in the root canal, considering the bond strength and intratubular penetration to the root dentin as evaluation criteria. The study protocol was prospectively registered and is available online ( https://osf.io/x5fma/ ). Reporting was based on PRISMA Extension for Scoping Reviews. The search was performed in Embase, PubMed, Scopus, and Web of Science. We selected studies without time and language restrictions that used sonic or ultrasonic methods to activate endodontic sealer, whose outcomes were bond strength and intratubular penetration. Three researchers independently selected the articles and collected data. Of 1422 articles, 19 were read in full and 13 studies were included. The vast majority of studies opted for direct activation of the endodontic sealer. The most investigated sealers were the epoxy resin-based sealers, and the ultrasonic activation method was the most explored. For the bond strength outcome, there was a trend toward higher values when the sealer was activated ultrasonically, but the findings seem to be divergent. The sonic activation was not effective for its intended purpose. For the outcome of intratubular penetration, the vast majority of studies indicate that the use of sonic and ultrasonic methods to activate the endodontic sealer is capable of increasing intratubular penetration. The use of sonic and ultrasonic methods to directly activate the endodontic sealer can increase the intratubular penetration of the sealer, but their benefits on the bond strength are uncertain.

Post retention strength of apical and conventional coating obturation methods using bioceramic sealer: a laboratory investigation

BACKGROUND

Once bioceramic sealer (BCS) enters the dentinal tubules, it cannot be reliably removed. BCS-occupied dentinal tubules reduce fibre post retention strength. Coating gutta-percha with BCS only on the apical portion may improve post retention strength due to increased retention strength between the dentin and resin cement interface. The aim of the study was to test this hypothesis.

METHODS

Root canals of 27 extracted human mandibular premolars were instrumented and randomly assigned to three obturation methods: conventional coating (CC), non-coating (NC), and apical coating (AC). The root canals were obturated with gutta-percha to 4 mm from the working length under an operating microscope. After the BCS was completely set, post spaces were prepared, and quartz fibre posts were cemented. The apical 4.5 mm of the roots were removed. Two samples were prepared at the apical, middle, and coronal root levels (one for scanning electron microscope (SEM) study and another for the push out bond strength (PBS) test). After the PBS test, the samples were examined with a stereo microscope to determine the failure mode: dentine-cement (DC), post-cement (PC) and mixed. The PBS data were analysed by One way ANOVA for the specific obturation method effects. Repeated ANOVA was used for the specific effects of the root levels on PBS in different obturation methods.

RESULTS

At all three root levels, more continuous hybrid layers and denser resin tags were found in the NC and AC than the CC group. The AC and NC groups' PBS was significantly higher than the CC group at the apical 1/3 (p = 0.002 and p = 0.001) and coronal 1/3 (p = 0.016 and p = 0.041). The PBS in the CC group at the middle 1/3 was significantly higher than the apical 1/3 (p = 0.022). DC failure mode was most commonly found in the CC group, while PC failure mode was found most frequently in the NC and AC groups.

CONCLUSIONS

The apical coating obturation method significantly increased PBS over the conventional coating method, potentially reducing fiber post dislodgement. However, this study was only preliminary. Clinical studies are required to confirm the results.

Does ultrasonic activation improve the bond strength and root canal filling quality of endodontic sealers?

This study aimed to investigate the effect of ultrasonic activation (UA) of three endodontic sealers on the bond strength to root dentin and root canal filling quality. Ninety six bovine incisors were instrumented and root canal filling was carried out using AH Plus (AP), Sealer Plus (SP), or Sealer Plus BC (BC), with or without UA (n=16/group). Two 1.5-mm slices were obtained from each root third. The first slice was subjected to push-out testing and failure mode analysis, while the second was observed under a stereomicroscope for filling quality assessment. Data were analyzed by Kruskal-Wallis, Mann-Whitney and Friedman tests (α=0.05). SP showed higher bond strength and fewer voids than BC in the apical third and when root thirds data were pooled. SP also had higher bond strength compared with AH Plus in the apical third. UA improved the bond strength when BC was used but did not affect the filling quality of any sealer. There were no significant differences between the ultrasonically activated sealers regarding bond strength and filling quality. When root thirds were compared, the bond strength was similar along the root, but there was a tendency to worsen filling quality, with more voids, in the apical segment. In conclusion, UA was effective in increasing the bond strength of the calcium silicate-based sealer but did not improve its filling quality. For the epoxy resin-based sealers, these properties were not affected by UA.

Comparison of Dentinal Tubule Penetration between a Calcium Silicate-Based Sealer with Ultrasonic Activation and an Epoxy Resin-Based Sealer: A Study Using Confocal Laser Scanning Microscopy

OBJECTIVE

 The aim of this study was to compare the degree of dentinal penetration between an epoxy resin-based sealer applied by using two different filling methods and an ultrasonically activated calcium silicate-based sealer via confocal laser scanning microscopy (CLSM).

MATERIALS AND METHODS

 Forty-five extracted permanent maxillary premolars with type II canals (Vertucci's classification) were subjected to the experiment. The root canals were instrumented and distributed randomly into the following three groups: AH Plus + continuous wave technique (AHC group); AH Plus + single cone technique (AHS group); and Endoseal MTA + single cone technique with ultrasonic activation (EMS) group. Each sealer was labeled with rhodamine B dye to allow visualization under CLSM. The sealer penetration depth in each sample was observed at 2 mm and 5 mm from the apex by using CLSM. The data were statistically analyzed by using analysis of variance or Kruskal-Wallis H test according to normality of variable (α = 0.05).

RESULTS

 In all groups, the maximum sealer penetration depth, mean fluorescence intensity, and sum fluorescence intensity values were higher at the 5-mm level than at the 2-mm level. At the 5-mm level, the EMS group showed the lowest value (p = 0.02). At the 2-mm level, there were no statistically significant differences among any of the groups. The AHC group showed higher values than the other groups, but there was no statistically significant difference in the apical area where access of instruments was difficult.

CONCLUSION

 The AHC group showed the highest dentinal tubule penetration, but had questionable filing efficacy in the apical area, which is of particular importance for the success of root canal treatment. Therefore, in areas such as the apical 2 mm of premolars with type II canals, which are difficult to access by using instruments such as heat carriers, other appropriate approaches may be required accordingly.

Dentinal tubule penetration of gutta-percha with syringe-mix resin sealer using different obturation techniques: A confocal laser scanning microscopy study

This study aimed to evaluate dentinal tubule penetration of the root canal filling material using various techniques such as cold lateral compaction, new generation thermoplastic core carrier and continuous-wave obturation. The root canals of premolar teeth were instrumented, and the teeth were allocated randomly to three groups (n = 15/group). After the obturation with three different techniques, three sections of 2-mm thickness at 2, 5 and 8-mm from the apex were examined under a confocal laser scanning microscope. The data were analysed of variance with a significance level of P < 0.05. There was no significant difference between techniques when parameters were evaluated in total (penetration depth P = 0.418, penetration area P = 0.701). The mean value of the cold lateral compaction group for maximum penetration depth was obtained higher than continuous wave (P = 0.004), whilst there was no significant difference between the thermoplastic core carrier and the other groups.

Intratubular penetration of endodontic sealers depends on the fluorophore used for CLSM assessment

Root canal filling aims at eliminating empty spaces into the root canal system using biologically compatible materials. Three-dimensional root canal obturation must prevent or minimize the reinfection caused by microorganisms' leakage. This study aimed at evaluating whether fluorophore (Rhodamine or Fluo-3) influences the CLSM images of intratubular penetration of four endodontic sealers. Eighty bovine teeth were prepared using K files up to a size #70 and irrigated with 2.5% sodium hypochlorite. All roots were divided into eight groups (n = 10) according to the sealer and fluorophore used: AH Plus/Rhodamine, AH Plus/Fluo-3, Sealer Plus/Rhodamine, Sealer Plus/Fluo-3, Sealer Plus BC/Rhodamine, Sealer Plus BC/Fluo-3, Endosequence/Rhodamine, and Endosequence/Fluo-3. All roots were filled using cold lateral compaction technique. After 7 days, the roots were transversely sectioned, and three slices, one of each canal third, were obtained. Intratubular penetration was evaluated using CLSM. Sealer Plus BC/Rhodamine and Endosequence BC/Rhodamine presented higher intratubular penetration than AH Plus/Fluo-3 and Sealer Plus/Fluo-3 (p ˂ .05). The intragroup analysis showed similar intratubular penetration, regardless of the root third, except for the apical third in AH Plus/Fluo-3 and Sealer Plus BC/Fluo-3 groups. The type of fluorophore influences the calcium silicate sealers' tubular penetration but not of epoxy resin-based ones using CLSM. Bioceramic sealers should not be used associated with Rhodamine for CLSM evaluation. RESEARCH HIGHLIGHTS: The type of fluorophore influences the calcium silicate sealers' tubular penetration but not of epoxy resin-based ones when CLSM is used for assessment. Bioceramic sealers should not be used associated with Rhodamine.

In Vitro Evaluation of Antibacterial Properties and Smear Layer Removal/Sealer Penetration of a Novel Silver-Citrate Root Canal Irrigant

This study aimed at evaluating the efficacy of a novel silver-citrate root canal irrigation solution (BioAKT) on smear layer removal, sealer penetration after root canal instrumentation and antibacterial activity. Single-root teeth were endodontically treated, sealed with an epoxi-amine resin sealer and irrigated using: Group I: 5.25% sodium hypochlorite (NaOCl); Group II: silver-citrate solution (BioAKT); Group III: phosphate buffer solution (PBS); Group IV: 17% ethylenediaminetetraacetic acid (EDTA). Smear layer removal and silver deposition at the coronal, middle and apical portion of each canal were analyzed using scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS). Sealer penetration into dentinal tubules at coronal, middle and apical portion was assessed through dye-assisted confocal microscopy (CSM). Both SEM and CSM micrographs were evaluated by two examiners (κ = 0.86), who were blind to the irrigation regimens; scores were given according to the degree of penetration of the sealer. Data analysis included Pearson’s x² and Sidak’s multiple comparisons. Dentin discs were polished and sterilized. Enterococcus faecalis biofilms were grown using a continuous-flow bioreactor under anaerobic conditions for 72 h. Specimens were irrigated with the tested solutions, and bacterial viability was assessed using a tetrazolium salt assay (MTT). Statistical analysis included one-way ANOVA and Student’s post-hoc t-test (p < 0.05). BioAKT and EDTA were the most efficient solutions both in removing the smear layer and allowing sealer penetration. However, at the apical portion BioAKT performed significantly better compared to EDTA both in smear layer removal and sealer penetration (p < 0.05). BioAKT and NaOCl showed comparable antibacterial effect (p = 0.53). In conclusion, BioAKT represents a suitable smear layer removal agent, which allows for reliable sealer penetration at the apical portion of the root canal system and offers significant antibacterial properties.

Correlation between Bond Strength to Dentin and Sealers Penetration by Push-Out Test and CLSM Analysis

This study correlated the bond strength (BS) and dentin penetration of different sealers by push-out test and Confocal Laser Scanning Microscopy (CLSM) analysis. Forty-five root canals were prepared according to the crown-down technique and filled with gutta-percha associated to the following sealers (n=15): Endofill, AH Plus and MTA Fillapex. Five canals of each group were filled with the sealers added with 0.1% Rhodamine B dye. Next, the specimens were transversely sectioned and submitted to the push-out test (n=10) and CLSM analysis (n=5). The BS data showed the following means (MPa) and standard deviation: AH Plus (4.17±1.86); MTA Fillapex (3.13±1.96) and Endofill (2.10±1.03). Statistical analysis (two-way ANOVA, α=0.05) showed significant difference among sealers (p<0.001) and root canal thirds (p<0.001). The BS results of Endofill and MTA Fillapex were statistically similar (p>0.05), however, they were statistically different from AH Plus (p<0.001). The regional analysis of BS showed similarity between middle and apical thirds (p>0.05), and both were different from coronal portion (p<0.001). CLSM analysis verified tags formation in all groups and higher penetration of the specimens filled with AH Plus (p<0.05). The Kendall test (correlation between BS to dentin and sealer penetration into dentinal tubules) and the Pearson test (between failures pattern and sealer penetration into dentinal tubules) did not show correlation between the variables evaluated for all the tested sealers (p>0.05). AH Plus group had higher BS to dentin, and deeper tags formation than the other sealers. There was no significant correlation between BS and intratubular penetration of the tested sealers.

Comparative effects of final canal irrigation with chitosan and EDTA

Chitosan is a natural, biocompatible chelating substance with potential for dental use. This study compared the effects of final canal irrigation with chitosan and EDTA on dentin microhardness, sealer dentin tubules penetration capacity, and push-out strength.

Effect of ultrasonic activation on dentinal tubule penetration of calcium silicate-based cements

This study investigated the dentinal tubule penetration of mineral trioxide aggregate (MTA), NeoMTA Plus and Biodentine placed by either manual condensation or ultrasonic activation in simulated open apex model. Standardized divergent open apex models were created using palatal roots of 60 human maxillary molars and divided into six groups according to the used cements and activation methods (n = 10): MTA-manual condensation, MTA-ultrasonic activation, NeoMTA Plus-manual condensation, NeoMTA Plus-ultrasonic activation, Biodentine-manual condensation, Biodentine-ultrasonic activation. For the measurement of penetration, the cements were mixed with 0.1% Rhodamin B and 6-mm apical portions of each root canal were obturated in an orthograde direction. The roots were embedded into acrylic blocks, and 1-mm-thick sections were obtained at 3 mm from the apex. Specimens were mounted onto glass slides and scanned under a confocal laser scanning microscope (CLSM) and stereomicroscope. Dentinal tubule penetration areas, depth and percentage were measured using LSM and ImageJ software. The data were analyzed using two-way analysis of variance (anova) with Bonferroni correction (α = 0.05). No correlation was found between stereomicroscope and CLSM analyses (p > .05). CLSM analysis showed no significant differences between MTA, NeoMTA Plus, and Biodentine groups when manual condensation was used (p > .05). Ultrasonic activation did not increase the tubular penetration of MTA, NeoMTA Plus or Biodentine as compared to manual condensation of each material (p > .05). MTA, NeoMTA Plus and Biodentine showed similar tubular penetration when manual condensation was used. Ultrasonic activation of these cements had no effect on tubular penetration of each material as compared to the manual condensation counterparts.

Capacidade de selamento e penetração intratubular do MTA Fillapex e do AH Plus em dentes humanos

Resumo Introdução O MTA é um importante material de uso na odontologia, com boas propriedades biológicas. As respostas experimentais aos cimentos endodônticos que utilizam este composto no selamento e preenchimento do sistema de canais radiculares, aliados a uma boa instrumentação e limpeza, podem ser importantes no processo de reparo periapical. Objetivo Avaliar in vitro a profundidade de penetração de dois diferentes cimentos endodônticos nos túbulos dentinários e a infiltração bacteriana em obturações com os cimentos AH Plus e MTA Fillapex. Material e método 34 pré-molares monorradiculados humanos foram selecionados, suas coroas removidas e suas raízes padronizadas em 16 mm, a seguir foram, então, divididos aleatoriamente em dois grupos de 15 espécimes e instrumentados com o sistema rotatório Pro Taper. Um grupo foi obturado com o cimento AH Plus (Grupo AH) e outro com MTA Fillapex (Grupo FI). Nestes grupos, avaliaram-se a infiltração coronária de bactérias para Enterococcus Faecalis e a profundidade de penetração nos túbulos dentinários. Para a aferição da infiltração bacteriana, usou-se o teste exato de Fisher; para a penetração intratubular, usou-se o teste-t. Resultado Para a infiltração bacteriana, considerando o número de amostras infiltradas para AH e MTA Fillapex, houve diferença estatística significativa (p=0,0341). Na avaliação da penetração intratubular, a diferença entre os dois grupos de cimentos foi considerada estatisticamente significativa (p=0,0006). Conclusão Ambos os cimentos apresentaram infiltração bacteriana, sendo que o MTA Fillapex teve pior desempenho. A capacidade de penetração nos túbulos dentinários do AH Plus foi significativamente maior que a do MTA Fillapex.