Remineralizing effect of commercial fluoride varnishes on artificial enamel lesions

Qualitative and quantitative evaluation of enamel surface roughness and remineralization after interproximal reduction: An in vivo study

INTRODUCTION

Interproximal reduction (IPR) damages the caries protective superficial layer of the enamel, making the enamel surface prone to caries because of the increase in surface roughness. Remineralizing solutions can help in preventing these undesirable side effects. Therefore, this study aimed to compare the effect of nanohydroxyapatite (nHAp) and sodium fluoride (NaF) application on enamel remineralization after IPR and to evaluate changes in surface roughness, composition, and microhardness of the treated enamel.

METHODS

A total of 25 patients with Angle's Class I malocclusion, requiring 4 premolar extractions, were selected and randomly divided into 5 groups (n = 5). Group 1 served as the control. In group 2, the extraction of premolars was done immediately after IPR, and in group 3, the extraction of premolars was done 3 months after IPR. In group 4, the extraction of premolars was performed 3 months after IPR with weekly application of nHAp serum. In group 5, the extraction of premolars was performed 3 months after IPR, along with once-a-month application of NaF varnish. The proximal reduction of premolars in all the groups was done using Strauss IPR burs (Strauss Diamond Instruments, Palm Coast, Fla). The extracted teeth were sectioned, and the enamel surfaces were subjected to energy-dispersive x-ray spectroscopy to evaluate elemental composition. Vicker's microhardness test was used to evaluate enamel hardness and atomic force microscopy for enamel surface roughness. Descriptive statistics were calculated for the 5 groups using a 1-way analysis of variance, and Tukey's multiple post-hoc test was used for intergroup comparison.

RESULTS

Calcium-to-phosphorous ratio, enamel microhardness, and surface roughness were found to be closest to untouched enamel in patients treated with nHAp, followed by patients who were treated with NaF. A lower calcium-to-phosphorous ratio and weakened and roughest enamel surface was seen in teeth, which were extracted immediately after IPR.

CONCLUSIONS

Among the remineralizing agents tested, nHAp serum can be recommended for better remineralization of enamel surfaces after IPR.

Inhibition of incipient caries lesion progression by different fluoridated varnishes

The aim of this in vitro study was to evaluate the potential of different fluoridated varnishes to inhibit the progression of incipient caries lesions after cariogenic challenge. Seventy-five enamel specimens of bovine teeth were prepared and selected based on the initial surface microhardness (SMH). The specimens were first subjected to artificial demineralization (in buffer solution) after which SMH was re-analyzed (SM1). They were then randomly assigned to five experimental groups: 1- CONTROL (pH cycling), 2 - MI VAR (MI Varnish with RECALDENTTM - CPP-ACP), 3 - PROFL (Profluorid®), 4 - CLIN (ClinproTM White Varnish with TCP), and 5 - DUR (Duraphat®) (n=15). The varnishes were applied in a thin layer and the specimens were then subjected to pH cycling for eight days. The SMH and cross-sectional microhardness (CSMH) were then analyzed (SM2). The fluoride and calcium ion concentrations in the solution were analyzed by the indirect method and atomic absorption spectrophotometry, respectively. Data were statistically analyzed by Student's t-test, ANOVA/Tukey-Kramer, or Kruskall-Wallis/Dunn tests for individual comparisons (p˂0.05). All varnishes led to significantly higher surface and subsurface remineralization compared with the control group but did not differ from each other. The varnishes with the highest fluoride release were: PROFL and CLIN, followed by MI VAR and DUR. The varnishes with significantly higher release of calcium were: DUR, CLIN, and PROFL. In conclusion, all commercial fluoridated varnishes tested have good potential to inhibit the progression of demineralization, regardless of the ion release mechanisms.

Comparative Evaluation of Longevity of Fluoride Release from Three Different Fluoride Varnishes: An Observational Study

Introduction

The cycles of demineralization and remineralization result in a dynamic process of caries development. Caries are prevented by the shift in the balance from demineralization to remineralization at the tooth-oral fluid interface with the help of salivary fluoride levels (in parts per million). The advantages of fluoride varnish application over other substitutes like dentifrices, mouthrinses, gels, or foams are that varnishes are well tolerated by infants, young children, or children with special healthcare needs and have prolonged therapeutic effects. This study was formulated to evaluate and compare the longevity of fluoride release from different fluoride varnishes, namely Fluor Protector, Enamelast, and Enamel Pro varnish.

Aim

To evaluate and compare the longevity of fluoride release from three different fluoride varnishes.

Materials and methods

The study samples comprised 72 healthy permanent maxillary anterior teeth. The teeth were divided into four groups, with eighteen teeth in each group. The surfaces of all teeth were then covered by different colored nail varnish according to the respective group, except for a 3 × 3 mm window on the facial (labial) surface of the crown, where the test materials were applied according to their respective group. In group I, Fluor Protector varnish; in group II, Enamelast varnish; and in group III, Enamel Pro varnish was applied. Group IV was the control group; hence, no test material was applied. All specimens were then stored in plastic containers with a pH of 7.2 in artificial saliva at room temperature. The specimens were transferred into new plastic containers after 1 day, containing fresh artificial saliva, and solutions from previous plastic containers were taken for fluoride analysis. This process was repeated sequentially to analyze the amount of fluoride released in ppm from the specimens at the end of 1, 3, and 6 months.

Statistical analysis

Analysis was performed on Statistical Package for the Social Sciences (SPSS) software (Windows version 22.0).

Results

Conventionally used 1.5% ammonium fluoride varnish, that is, Fluor Protector varnish, showed the least release of fluoride (0.03 ± 0.0 ppm), while resin carrier-based 5% sodium fluoride varnish, that is, Enamelast varnish showed a good amount of fluoride release for 6 months continuously, that is, (0.16 ± 0.06 ppm) at last follow-up. Enamel Pro varnish, which has 5% sodium fluoride with amorphous calcium phosphate (ACP) formula, was found to be the best varnish as it released the maximum amount of fluoride in ppm in artificial saliva for up to 3 months (0.32 ± 0.08) but less than Enamelast varnish only at 6 months follow-up that is 0.09 ± 0.03 ppm.

Conclusion

The present study concludes that based on the amount of fluoride released for 6 months duration, Enamel Pro varnish, followed by Enamelast varnish and Fluor Protector varnish, are advisable to apply for caries prevention.

How to cite this article

Singh V, Naik S, Vashisth P, et al. Comparative Evaluation of Longevity of Fluoride Release from Three Different Fluoride Varnishes: An Observational Study. Int J Clin Pediatr Dent 2024;17(3):341-345.

Investigating the efficacy of a varnish containing gallic acid on remineralization of enamel lesions: an in vitro study

This study evaluated the efficacy of a formulated remineralizing gallic acid (GA) varnish in treating artificial enamel caries lesions. Fifty-five intact bovine incisors were collected. Enamel blocks (5 × 9 mm) were prepared. A third of each block's surface remained intact. Primary carious lesions were induced on the middle and bottom thirds of the blocks by immersing the samples in a demineralization solution for 6 h. The bottom third of the blocks were further remineralized by randomly applying 0.5%, 2%, or 8% GA varnishes and 2.26% fluoride varnish (V varnish, Vericom, Seoul, Korea), or the varnish base without active ingredients (n = 11 each). The specimens were immersed in a remineralizing solution for 4 h and then subjected to a 2-hour immersion in the demineralizing solution. After six days of pH cycling, the surface microhardness was measured at depths of 30, 75, and 120 μm. The percentage of surface microhardness recovery (SMHR%) was compared among the groups using the Shapiro-Wilk, ANOVA, and Tukey HSD post-hoc tests (α = 0.05). The SMHR% of all experimental groups was higher than the control group at 30 μm (p < 0.05). The 0.5% GA varnish showed the highest SMHR% at all depths; however, the difference with the other experimental groups was significant at a depth of 30 μm (p < 0.05). The SMHR% of the fluoride and the 2% and 8% GA varnishes was comparable at all depths. All treatments potentially remineralize enamel lesions, with 0.5% GA varnish having the greatest effect, particularly on the top surface layer. As such, this newly developed varnish may emerge as a promising alternative to fluoride varnish.

Evaluation of ER;CR:YSGG Laser and Remineralization Agents on Mineral Density and Ion Levels of Primary and Permanent Enamel

Objective: The aim of this study is to evaluate the efficacy of two different fluoride varnishes used alone or in combination with laser treatment on permanent and primary tooth enamel. Methods: Ninety-six primary and 96 permanent molar samples were divided into six groups. The levels of calcium, phosphorus, fluoride, and silver ions of each sample were analyzed using energy-dispersive X-ray spectroscopy (EDS). Six different treatments were applied to 12 different groups (n = 15) as control (g1/G1), fluoride varnish (g2/G2), casein phosphopeptide-amorphous calcium phosphate (CPP-ACP)-fluoride varnish (g3/G3), laser (g4/G4), laser+fluoride varnish (g5/G5), and laser+CPP-ACP-fluoride varnish (g6/G6). After the procedures, ion levels were reanalyzed with EDS. The teeth were subjected to the artificial caries-forming procedure and ion levels were again evaluated by EDS. One sample from each group was prepared separately for the focused ion beam-scanning electron microscope measurement; initial and final images were recorded. The obtained data were statistically analyzed with the SPSS 23.0 program. Results: Compared with the initial measurement, phosphorus percentages increased in most of the groups in the last measurement. Calcium percentages of primary teeth increased in the last measurement, except for the g1 group, but in permanent teeth, there was an increase only in the G6 group. There was a statistically significant difference between g1/G1 and g6/G6 groups in the last measurement of phosphorus and calcium percentages. Conclusions: The combined use of laser with CPP-ACP-fluoride varnish enhanced remineralization in the primary and permanent teeth. However, in permanent teeth, the use of laser alone was not as effective as in primary teeth. Therefore, combined usage with CPP-ACP-fluoride varnish can enhance its efficacy. This in vitro study was approved by the local ethics committee of Hacettepe University (Project No.: GO 20/441).

Effect of Remineralizing Agents on Shear Bond Strength of Orthodontic Brackets-In Vitro Study

Orthodontic treatment can be effective only with the proper adhesion strength of the bonded elements on the teeth. The aim of the study was to analyze the influence of different remineralization products on the brackets (Evolve Low Profile Brackets 0.022 Roth prescription (DB Orthodontics Ltd., Silsden, England) shear bond strength (SBS)). In all, 40 teeth were investigated for this study; n = 30 demineralized (immersed in 0.1% citric acid for 30 min, twice a day, for 20 consecutive days) and n = 10 immersed only in artificial saliva. After the demineralization process, remineralization agents were applied to each group (n = 10): Group I: Elmex Sensitive professional^® toothpaste (CP, Gaba GmbH, Witten, Germany) and GC MI Paste Plus^® (GC, Leuven, Belgium), Group II: Elmex Sensitive professional^® toothpaste (CP, Gaba GmbH, Germany) and GC Tooth Mousse^® (Leuven, Belgium), Group III: Elmex Sensitive professional^® toothpaste (CP, Gaba GmbH, Germany). For the teeth in control group C, Elmex Sensitive professional^® toothpaste was used. SBS tests were performed by means of an advanced materials-testing machine that generated maximum load and tensile strength values. The data obtained underwent statistical analysis (ANOVA and Tuckey test) with a statistical threshold of p < 0.05. The SBS values were higher for group II (14.20 MPa) and I (10.36 MPa) and lower for group III (4.25 MPa) and C (4.11 MPa), with statistically significant differences between groups I and II when compared with groups III and C (p < 0.05). In conclusion, GC Tooth Mousse^® and MI-Paste Plus^® have no adverse effect on brackets SBS and are recommended to be used for enamel remineralization during orthodontic treatment.

Effect of different surface treatments on the microhardness and colour change of artificial enamel lesions

BACKGROUND

To investigate the effect of three different surface treatments on the microhardness and colour change of artificial enamel lesions.

MATERIALS AND METHODS

One hundred bovine teeth were randomly assigned into four groups. Artificial enamel lesions were created using demineralizing solution for all groups except the sound enamel group. Different surface treatments were then performed G1: resin-infiltrant; G2: Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP); G3: artificial saliva; G4: Sound Enamel. Each group was subdivided into three subgroups, where each subgroup was subjected to a different testing method. Subgroup 1: surface microhardness; subgroup 2: cross-sectional microhardness; subgroup 3: colour measurement. Statistical analysis was performed by ANOVA, followed by Tukey's post hoc test.

RESULTS

Sound enamel group recorded the highest surface and cross-sectional microhardness results. No significant difference was found between the resin-infiltrant group and CPP-ACP regarding surface and cross-sectional microhardness at different lesion depths. Resin-infiltrant group showed the least colour change (∆E) results compared to the other groups.

CONCLUSION

Resin-infiltrant can effectively enhance surface microhardness and enamel resistance to demineralization, additionally, reduces the staining susceptibility of white spot lesions (WSLs) after treatment. CPP-ACP application for 4 weeks seems to improve surface microhardness; however, has a limited effect in resisting staining of WSLs after treatment. © 2022 Australian Dental Association.

Remineralization Efficacy of Four Remineralizing Agents on Artificial Enamel Lesions: SEM-EDS Investigation

Dental remineralization represents the process of depositing calcium and phosphate ions into crystal voids in demineralized enamel, producing net mineral gain and preventing early enamel lesions progression. The aim of the present study was to qualitatively and quantitatively compare the remineralizing effectiveness of four commercially available agents on enamel artificial lesions using Scanning Electron Microscopy (SEM) combined with Energy Dispersive Spectroscopy (EDS) techniques. Thirty-six extracted third molars were collected and randomly assigned to six groups (n = 6), five of which were suspended in demineralizing solution for 72 h to create enamel artificial lesions, and one serving as control: G1, treated with a mousse of casein phosphopeptide and amorphous calcium−phosphate (CPP-ACP); G2, treated with a gel containing nano-hydroxyapatite; G3, treated with a 5% SF varnish; G4, treated with a toothpaste containing ACP functionalized with fluoride and carbonate-coated with citrate; G5, not-treated artificial enamel lesions; G6, not demineralized and not treated sound enamel. G1−G4 were subjected to pH cycling over a period of seven days. Analyses of the specimens’ enamel surfaces morphology were performed by SEM and EDS. Data were statistically analyzed for multiple group comparison by one-way ANOVA/Tukey’s test (p < 0.05). The results show that the Ca/P ratio of the G5 (2.00 ± 0.07) was statistically different (p < 0.05) from G1 (1.73 ± 0.05), G2 (1.76 ± 0.01), G3 (1.88 ± 0.06) and G6 (1.74 ± 0.04), while there were no differences (p > 0.05) between G1, G2 and G6 and between G4 (2.01 ± 0.06) and G5. We concluded that G1 and G2 showed better surface remineralization than G3 and G4, after 7 days of treatment.

Effectiveness of Two Different Fluoride-Based Agents in the Treatment of Dentin Hypersensitivity: A Prospective Clinical Trial

Hyperesthesia is related to increased sensitivity of dental tissues to mechanical, chemical and thermal stimuli. The aim of this prospective clinical trial was to compare the effectiveness of a calcium-fluoride-forming agent (Tiefenfluorid®, Humanchemie GmbH, Alfeld, Germany) with that of a fluoride varnish (EnamelastTM, Ultradent Inc., Cologne, Germany) in the treatment of dental hyperesthesia in adult patients. In total, 176 individuals (106 females and 70 males, aged 18-59 years old) diagnosed with dental hyperesthesia (DH) were enrolled. The main clinical symptoms were hyperesthesia from coldness and sweetness during chewing; the types of clinical lesions were also determined and recorded. The patients were selected randomly and divided into two groups: (i) the first group of 96 patients was treated with Tiefenfluorid® applied in three appointments at 7-day intervals; (ii) the second group of 80 patients was treated with EnamelastTM, applied seven times at 7-day intervals. All the patients were recalled 7 days, 14 days, 1 month, 3 months, and 6 months from the last application. At the baseline and during every follow-up visit, the DH was measured with a pulp tester. A random intercept/random slope model was used to evaluate the effect of the treatment, at various times with respect to the initial diagnosis. Within the limits of the present study, Tiefenfluorid® was more effective than EnamelastTM against DH in that it provided long-lasting results, with a significant improvement still detected at the latest 6-month follow-up.

Effect of Cold Atmospheric Pressure Plasma Coupled with Resin-Containing and Xylitol-Containing Fluoride Varnishes on Enamel Erosion

Purpose

Considering the suggested advantages of cold atmospheric plasma (CAP) in increasing the fluoride uptake by the enamel, this study aimed to assess enamel erosion following the application of helium CAP and two types of fluoride varnishes.

Methods

The microhardness of 70 bovine enamel specimens was measured using a Vickers hardness tester. The specimens were randomly divided into 7 groups (n = 10): control, CAP (P), resin-containing fluoride varnish (RF), CAP + resin-containing fluoride varnish (PRF), fluoride varnish (F), CAP + fluoride varnish (PF), and erosion (E). The specimens in the control and erosion groups did not receive CAP or fluoride varnish. All specimens underwent erosive challenge 4 times/day using hydrochloric acid and artificial saliva except for the control specimens that remained in distilled water during the course of the study. After 5 days of erosive challenge, microhardness was measured again, and the percentage of microhardness change was calculated. Surface roughness of two specimens in each group was assessed by atomic force microscopy (AFM). Data were analyzed using one-way ANOVA followed by Tamhane's post-hoc test.

Results

The percentage of microhardness change in all groups was significantly higher than that of the control group. All groups showed significantly lower percentage of microhardness change compared with the E group except for the P group; no significant difference was noted in microhardness change of P and E groups. Other experimental groups had no significant difference with each other. Surface roughness was the highest in PRF and the lowest in the F group.

Conclusion

CAP application had no significant effect on increasing the enamel resistance to erosion. However, enamel resistance to erosion increased significantly after fluoride varnish application alone or fluoride varnish application combined with CAP. No significant difference was noted between the two types of varnishes in this regard. CAP increased the surface roughness while fluoride varnish application alone decreased the roughness.

Effect of application time and concentration of silver diamine fluoride on the enamel remineralization

Background

Silver diamine fluoride has attracted attention because of its clinical success in arresting dental caries. Thus, the aim of this study was to evaluate the effect of different application times and concentrations of silver diamine fluoride (SDF) on deciduous tooth enamel remineralization.

Material and Methods

Blocks of deciduous tooth enamel were categorized into six groups of 11 each: 2 control groups: intact enamel, and demineralized enamel; 38% SDF and 30% SDF which were subdivided according to application times (1 and 3 min). The microhardness of samples was determined, and all groups except the intact enamel group were subjected to pH cycling to produce initial carious lesions. The 38% and 30% SDF solutions were applied to the enamel for 1 or 3 min. After pH cycling and SDF treatments, the microhardness was again determined. Samples were sectioned to evaluate the cross-sectional microhardness. Furthermore, internal porosity of the samples was examined using micro-CT. Data were statistically analyzed by analysis of variance followed by Tukey’s test, and linear regression analyses were performed.

Results

There was no difference in enamel remineralization based on surface and cross-sectional microhardness. The 30% SDF solution applied for 3 min promoted significantly less pores than the other groups.

Conclusions

The 1-min application time promoted enamel remineralization regardless of the SDF concentration (30% or 38%).

Key words:Cariostatic agents, dental caries, primary tooth, tooth remineralization.

Sylc Air Polishing Versus Fluoride Varnish Application in Managing Dentin Hypersensitivity in Non-Carious Cervical Lesions: A Randomized Clinical Trial

Objective:

To determine the effectiveness of Sylc (a bioactive glass-based powder) delivered by an air polishing system compared to fluoride varnish application in managing Dentin Hypersensitivity (DH).

Methods:

This study was a double-blinded randomized clinical trial where 50 participants with DH in at least one tooth with a non-carious cervical lesion were included and randomized into two groups (25 participants each) to receive either Sylc air polishing or fluoride varnish application. Baseline and post-intervention measurements of pain were carried out using evaporative, thermal and tactile stimuli using a modified visual analog scale at 3 minutes, 1, 2, 3and 4 weeks, 6 months and 1 year post-intervention. Data for pain intensity was recorded and analyzed for each group.

Results:

For the three stimuli used, Sylc air polishing showed statistically significant reduction of pain intensity (P<0.05) after 3 weeks and up to 1 year post-intervention. Fluoride varnish application showed a statistically significant reduction of pain intensity in evaporative and thermal stimuli at 1 week post-intervention only.

Conclusion:

Sylc air polishing was effective in relieving pain due to DH after 3 weeks and up to 1 year post-intervention, which showed that it can be used as a long-term treatment for DH.

Sylc Air Polishing Versus Fluoride Varnish Application in Managing Dentin Hypersensitivity in Non-Carious Cervical Lesions: A Randomized Clinical Trial

Objective:

To determine the effectiveness of Sylc (a bioactive glass-based powder) delivered by an air polishing system compared to fluoride varnish application in managing Dentin Hypersensitivity (DH).

Methods:

This study was a double-blinded randomized clinical trial where 50 participants with DH in at least one tooth with a non-carious cervical lesion were included and randomized into two groups (25 participants each) to receive either Sylc air polishing or fluoride varnish application. Baseline and post-intervention measurements of pain were carried out using evaporative, thermal and tactile stimuli using a modified visual analog scale at 3 minutes, 1, 2, 3and 4 weeks, 6 months and 1 year post-intervention. Data for pain intensity was recorded and analyzed for each group.

Results:

For the three stimuli used, Sylc air polishing showed statistically significant reduction of pain intensity (P<0.05) after 3 weeks and up to 1 year post-intervention. Fluoride varnish application showed a statistically significant reduction of pain intensity in evaporative and thermal stimuli at 1 week post-intervention only.

Conclusion:

Sylc air polishing was effective in relieving pain due to DH after 3 weeks and up to 1 year post-intervention, which showed that it can be used as a long-term treatment for DH.

Biomimetic Effect of Nano-Hydroxyapatite in Demineralized Enamel before Orthodontic Bonding of Brackets and Attachments: Visual, Adhesion Strength, and Hardness in In Vitro Tests

Dietary habits with high consumption of acidic food can induce in orthodontic patients an increased risk of demineralization lesions around orthodontic brackets and bands. The purpose of the present laboratory study is to assess the in vitro visual efficacy of a biomimetic nano-hydroxyapatite remineralizing solution in a hypomineralized enamel surface and its effect on adhesion of fixed orthodontic appliances and on enamel microhardness. Intact teeth were demineralized, and subsequently the areas of demineralization were visually recorded using a 0-100 scale. Subsequently, a remineralizing solution (Biorepair® Repair Shock Treatment) was applied for ten minutes once a day/for one week per month for a total remineralizing treatment of 3 months. Visual effects were recorded. Moreover, bond strength was recorded and adhesive remnant index scores were measured for both orthodontic brackets and composite attachments both before demineralization and after demineralization and application of remineralizing solution. Also, Vickers microhardness was measured. All data were submitted to statistical analysis. The application of remineralizing solution induced a significant in vitro reduction of demineralized areas after the first week of application. No significant differences between untreated enamel surfaces and remineralized surfaces were detected after 2 months of remineralizing treatment. Bond strength values were significantly reduced for both brackets and attachments after remineralizing treatment. However, attachments showed higher adhesion values than brackets in both conditions tested. Remineralized enamel showed significantly higher microhardness values than demineralized enamel and lower values than intact enamel.