Effect of CPP-ACP on remineralization of artificial caries-like lesion: an in situ study

Improving Oral Health with Fluoride-Free Calcium-Phosphate-Based Biomimetic Toothpastes: An Update of the Clinical Evidence

As the demand for clinically effective fluoride-free oral care products for consumers increases, it is important to document which types of toothpastes have been shown in clinical studies to be effective in improving oral health. In this review, we included different indications, i.e., caries prevention, improving periodontal health, reducing dentin hypersensitivity, protecting against dental erosion, and safely improving tooth whitening in defining what constitutes improvement in oral health. While there are several professional and consumer fluoride-containing formulations fortified with calcium-phosphate-based ingredients, this review focuses on fluoride-free toothpastes containing biomimetic calcium-phosphate-based molecules as the primary active ingredients. Several databases were searched, and only clinical trials in human subjects were included; in vitro and animal studies were excluded. There were 62 oral health clinical trials on biomimetic hydroxyapatite (HAP), 57 on casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), 26 on calcium sodium phosphosilicate (CSPS, or so called Bioglass), and 2 on β-tricalcium phosphate (β-TCP). HAP formulations were tested the most in clinical trials for benefits in preventing caries, dentin hypersensitivity, improving periodontal health, and tooth whitening. Based on the current clinical evidence to date, fluoride-free HAP toothpaste formulations are the most versatile of the calcium phosphate active ingredients in toothpastes for improving oral health.

Effect of self-assembling peptide and other remineralizing agents on preventing initial enamel lesions around orthodontic brackets: An in vitro comparative study

OBJECTIVE

To investigate and compare the effect of self-assembling peptide SAP (P_11-4), casein phosphopeptide-amorphous calcium phosphate fluoride paste (CPP-ACPF), and fluoride varnish (FV) on preventing enamel demineralization around orthodontic brackets.

MATERIAL AND METHODS

Orthodontic brackets were bonded to the buccal surfaces of 80 freshly extracted human maxillary premolars. Teeth were randomly assigned to four groups (n=20) according to the remineralizing agent used as follows: SAP (P_11-4) group (Curodont™ Protect/Credentis), CPP-ACPF group (MI Paste Plus®/Recaldent™), fluoride varnish group (Profluoride varnish®/VOCO), and control group. All products were applied according to the manufacturer's instructions. Specimens were cycled in daily refreshed demineralizing and remineralizing solutions for 8h and 16h, respectively, for 28 days. The calcium/phosphorus ratio (Ca/P) and surface microhardness (SMH) were evaluated at baseline and at two and four weeks. Two-way ANOVA (analysis of variance), one-way ANOVA and repeated measures ANOVA were used for statistical analysis.

RESULTS

Two-way ANOVA demonstrated significant differences between remineralizing agents and time points. After 4 weeks, the SAP (P_11-4) group had had significantly higher Ca/P ratio and SMH (1.68±0.11 and 346.47±55.38) compared to other groups, followed by CPP-ACPF (1.52±0.19 and 283.53±64.75), FV (1.37±0.14 and 262.80±82.98), and the control group (1.31±0.10 and 213.00±41.95). Significantly higher Ca/P ratio and SMH were observed at 2 weeks in the control group (1.44±0.10 and 269.63±57.37) and FV group (1.52±0.09 and 321.17±55.24) compared to 4 weeks. No significant differences were found regarding Ca/P ratio and SMH at 2 weeks in the CPP-ACPF (1.55±0.15 and 295.14±53.88) and SAP P_11-4 groups (1.64±0.10 and 320.18±58.04) compared to 4 weeks.

CONCLUSION

SAP (P_11-4) had the greatest remineralizing efficacy compared to FV and CPP-ACPF. Moreover, extended period of time improved the preventive efficacy of SAP (P_11-4) compared to the other regimens.

Remineralization Efficacy of Four Remineralizing Agents on Artificial Enamel Lesions: SEM-EDS Investigation

Dental remineralization represents the process of depositing calcium and phosphate ions into crystal voids in demineralized enamel, producing net mineral gain and preventing early enamel lesions progression. The aim of the present study was to qualitatively and quantitatively compare the remineralizing effectiveness of four commercially available agents on enamel artificial lesions using Scanning Electron Microscopy (SEM) combined with Energy Dispersive Spectroscopy (EDS) techniques. Thirty-six extracted third molars were collected and randomly assigned to six groups (n = 6), five of which were suspended in demineralizing solution for 72 h to create enamel artificial lesions, and one serving as control: G1, treated with a mousse of casein phosphopeptide and amorphous calcium−phosphate (CPP-ACP); G2, treated with a gel containing nano-hydroxyapatite; G3, treated with a 5% SF varnish; G4, treated with a toothpaste containing ACP functionalized with fluoride and carbonate-coated with citrate; G5, not-treated artificial enamel lesions; G6, not demineralized and not treated sound enamel. G1−G4 were subjected to pH cycling over a period of seven days. Analyses of the specimens’ enamel surfaces morphology were performed by SEM and EDS. Data were statistically analyzed for multiple group comparison by one-way ANOVA/Tukey’s test (p < 0.05). The results show that the Ca/P ratio of the G5 (2.00 ± 0.07) was statistically different (p < 0.05) from G1 (1.73 ± 0.05), G2 (1.76 ± 0.01), G3 (1.88 ± 0.06) and G6 (1.74 ± 0.04), while there were no differences (p > 0.05) between G1, G2 and G6 and between G4 (2.01 ± 0.06) and G5. We concluded that G1 and G2 showed better surface remineralization than G3 and G4, after 7 days of treatment.

Remineralization of early enamel lesions with a novel prepared tricalcium silicate paste

To evaluate the remineralization potential of prepared tricalcium silicate (TCS) paste compared to silver diamine fluoride-potassium iodide (SDF-KI) and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) on artificial enamel lesions. Thirty permanent sound molars were collected for the study. After cleaning, root cutting, and applying acid-resistant nail varnish, leaving a 4 × 4 mm buccal window, the teeth were subjected to demineralization process. The teeth were divided into three treatment groups (n = 10). In each group, the teeth were sectioned buccolingually to obtain two halves (30 self-control and 30 experimental halves). The self-control halves were subjected to cross-sectional microhardness (CSMH), energy-dispersive X-ray spectroscopy at 50, 100, and 150 µm from the external enamel surface, and micromorphological analysis at the superficial enamel surface. The experimental halves were subjected to the same tests after 30 days of remineralization. Three-way analysis of variance (ANOVA) outcomes showed no significant difference in CSMH after treatment among the three different groups at the different levels (p > 0.05). Meanwhile, three-way ANOVA outcomes showed a significant difference in calcium/ phosphate ratio after treatment among the three different groups at the different levels. (p < 0.05). The tricalcium silicate paste used in this study showed potential remineralization in subsurface enamel lesions.

Efficacy of a Novel Bioactive Glass-Polymer Composite for Enamel Remineralization following Erosive Challenge

Introduction

Dental caries is the most common cause of tooth loss. However, it can be stopped by enhancing remineralization. Fluoride and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) are among the most important remineralizing agents. Recent studies have used bioactive glass as a remineralizing agent in different forms. This study aimed to assess the efficacy of a composite paste (prepared by mixing urethane polypropylene glycol oligomer with bioactive glass powder for easier application).

Materials and Methods

Enamel disks were cut out of the buccal surface of extracted sound third molars. The samples were randomly divided into 3 groups of 15 and underwent Vickers microhardness test. X-ray diffraction (XRD) and field emission scanning electron microscopy/energy dispersive X-ray spectroscopy (FESEM/EDS) were performed. All samples were immersed in a demineralizing solution for 14 days. The tests were then repeated. Next, bioactive glass paste, fluoride, and CPP-ACP were applied on the surface of the samples and they were then stored in an artificial saliva for 14 days. The tests were repeated again. The microhardness values were analyzed using repeated measures ANOVA followed by one-way ANOVA and Tukey's post hoc test (P < 0.05).

Results

The microhardness of the bioactive glass group was significantly higher than that of other groups (P < 0.05). XRD revealed an enamel structure more similar to sound enamel in the bioactive glass and CPP-ACP groups compared with the fluoride group. FESEM/EDS revealed higher hydroxyapatite deposition in the bioactive glass group than in the other two groups.

Conclusions

All three remineralizing agents caused remineralization, but bioactive glass paste had a greater efficacy.

Remineralization effects of self-assembling peptide P11 -4 associated with three materials on early enamel carious lesions: An in vitro study

The aim of this study was to assess the remineralization of enamel caries lesions using the self-assembling peptide P11 -4 associated with different materials. Artificial early enamel lesions were prepared on 154 primary teeth. The samples were randomly divided into eight groups: (1) control, (2) P11 -4, (3) fluoridate toothpaste (FT), (4) P11 -4 + FT, (5) casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), (6) P11 -4 + CPP-ACP, (7) fluoridate bioactive glass toothpaste (BT), and (8) P11 -4 + BT. The surface enamel microhardness (EMH) and energy-dispersive X-ray spectroscopy (EDS) of the teeth were then measured at the baseline, after demineralization, and after 28 days of remineralization. The enamel surfaces were assessed by field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). The data were analyzed with one-way analysis of variance (ANOVA) (p < .05). EMH after demineralization was significantly lower than the baseline value (p < .001). The interventions led to an enhanced percentage of EMH recovery (%REMH), which was higher in Groups 6 and 7. There was no significant difference between Groups 3 and 4. Groups 1 and 2 had the lowest %REMH. The mean calcium/phosphate weight percentage ratio of P11 -4 was significantly lower than the others (p < .001). The FESEM and AFM images revealed mineral deposition on the eroded enamel and reductions in surface roughness in Groups 5 and 7.

Effectiveness of CPP-ACP and Fluoride Products in Tooth Remineralization

OBJECTIVES

To compare the effectiveness of the casein phosphopeptide-stabilized amorphous calcium phosphate (CPP-ACP) in the in situ remineralization of enamel exposed to two different degrees of preformed enamel lesions.

METHODS

One hundred and sixty 3x3x2 mm human enamel slabs were demineralized and divided into two subgroups according to baseline surface hardness (SH=B1≤150 and B2 >150). During each of four 10-day experimental periods, 10 participants wore intraoral removable acrylic palatal expanders with four human enamel slabs with preformed lesions (B1 and B2): CO1 and CO2 - Control: silica dentifrice without fluoride; MP1 and MP2: MI Paste; MPP1 and MPP2: MI Paste Plus; and FD1 and FD2: Fluoride dentifrice. The Knoop hardness test (50/15s Micromet 2001, Buehler, IL, USA) was performed after demineralization (B1 and B2) and after treatment (T1 and T2).

RESULTS

SH was higher in all treatment groups when compared with the controls, except for CO2 (Mann Whitney Wilcoxon Test; p <0.05). %SH was similar between MPP2 and FD2 and between MPP2 and MP2; however, FD2 and MPP2 products were more effective in microhardness recovery. In B1, all treatment groups were similar.

CONCLUSION

MPP and FD are more effective in preventing demineralization in enamel subsurface lesions.

Shear bond strength of orthodontic brackets on intact and demineralized enamel after application of resin infiltrant, fluoride varnish and casein phosphopeptide-amorphous calcium phosphate remineralizing agents: in-vitro study

OBJECTIVE

To evaluate the effects of remineralizing agents on the shear bond strength (SBS) of orthodontic brackets bonded to intact and demineralized enamel.

MATERIAL AND METHODS

In this in-vitro study, 160 human premolars were divided into 8 groups, including group 1 with intact enamel as the positive control, group 2 with demineralized enamel as the negative control, groups 3-5 treated with fluoride varnish, Casein Phosphopeptide-Amorphous Calcium Phosphate (CPP-ACP) and resin infiltrant on intact enamel, and groups 6-8 treated with the same agents on demineralized enamel. Brackets were bonded using the conventional method, and the samples were thermocycled. SBS of the brackets was measured using a universal testing machine, and the adhesive remnant index (ARI) was assessed. Data were analysed with one-way ANOVA and post hoc statistical test at the significance level of 0.05.

RESULTS

SBS of the brackets in all groups with intact enamel was higher than that of their counterparts on demineralized enamel, which was only significantly different between groups 1 and 2 (P-value<0.001). SBS values of groups 7 and 8 were not significantly different from group 1 (P-value=1), yet the application of fluoride varnish on both intact (P-value=0.091) and demineralized enamel (P-value<0.001) created less SBS than in group 1.

CONCLUSIONS

All pre-treatment methods increased SBS of the brackets bonded to demineralized enamel, yet only the resin infiltrant and CPP-ACP produced SBS similar to that of intact enamel. Also, the use of fluoride varnish on intact enamel significantly reduced SBS.