Production, purification and characterization of a thermostable β-1,3-glucanase (laminarinase) produced by Moniliophthora perniciosa

Spray-Dried Powder Containing Chitinase and β-1,3-Glucanase with Insecticidal Activity against Ceratitis capitata (Diptera: Tephritidae)

This study focused on obtaining a spray-dried powder containing chitinase and β-1,3-glucanase as active ingredients for the control of agricultural pests. Different carriers were tested in the spray drying of these enzymes. The effectiveness of the application of the enzymes was evaluated against Ceratitis capitata (Diptera: Tephritidae). The combination of maltodextrin (2.5% w/v), gum Arabic (2.5% w/v), and soluble starch (5.0% w/v) as carriers showed the best result of residual activity of β-1,3-glucanase (88.36%) and chitinase (69.82%), with a powder recovery of 45.49%. The optimum conditions for the operational parameters of the spray drying process were: inlet air temperature of 120 °C, drying airflow rate of 1.1 m3/min, feed flow rate of 5.8 mL/min, and nozzle air pressure of 0.4 MPa. The powder produced showed 65.6% efficiency for the control of the fly. These results demonstrated the possibility of using the spray drying process to obtain an enzymatic potential product for biological pest control.

β-Glucosidase produced by Moniliophthora perniciosa: Characterization and application in the hydrolysis of sugarcane bagasse

β-Glucosidases (BGLs) belong to the group of enzymes of cellulases and act in the last stage of cellulose degradation, releasing glucose molecules, eliminating the inhibitory effect of cellobiose. This study focused on the production, characterization, and application of BGL from Moniliophthora perniciosa in the hydrolysis of pretreated sugarcane bagasse (3% NaOH + 6% Na₂ SO₃ ), with varying enzymatic loads and reaction times. The enzyme showed an optimum pH of 4.5 and 60°C. It was stable at all temperatures analyzed (50-90°C) and retained about 100% of its activity at 50°C after 60 min of incubation. Among the ions analyzed, BaCl₂ increased BGL activity 9.04 ± 1.41 times. The maximum production of reducing sugars (89.15%) was achieved after 48 h with 10 mg of protein.

A set of simple methods for detection and extraction of laminarinase

A carefully designed ammonium sulfate precipitation will simplify extraction of proteins and is considered to be a gold standard among various precipitation methods. Therefore, optimization of ammonium sulfate precipitation can be an important functional step in protein purification. The presence of high amounts of ammonium sulphate precludes direct detection of many enzymatically active proteins including reducing sugar assays (e.g. Nelson-Somogyi, Reissig and 3,5-dinitrosalicylic acid methods) for assessing carbohydrases (e.g. laminarinase (β (1-3)-glucanohydrolase), cellulases and chitinases). In this study, a simple method was developed using laminarin infused agarose plate for the direct analysis of the ammonium sulphate precipitates from Streptomyces rimosus AFM-1. The developed method is simple and convenient that can give accurate results even in presence of ammonium sulfate in the crude precipitates. Laminarin is a translucent substrate requiring the use of a stain to visualize the zones of hydrolysis in a plate assay. A very low-cost and locally available fluorescent optical fabric brightener Tinopal CBS-X has been used as a stain to detect the zones of hydrolysis. We also report simple methods to prepare colloidal chitin and cell free supernatant in this manuscript.

Industrial attributes of β-glucanase produced by Bacillus sp. CSB55 and its potential application as bio-industrial catalyst

The β-glucanase produced from Bacillus sp. CSB55 not only depicts the potent industrial characteristics but also relates as bio-industrial catalyst supporting the spontaneous formation of the products, high hydrolytic efficiency, and feasibility of the enzymatic reaction. A homogeneous β-glucanase (GluB55) was purified via various purification processes resulting in 11.69% yield and 14.24-fold purity. Biochemical characterization of the purified enzyme revealed the molecular mass of approximately 40 kDa, which was verified by zymography. The optimum activity of GluB55 was determined at pH 7.2 and 55 °C. GluB55 could highly hydrolyze carboxymethylcellulose and was stable over a wide range of pH, retaining more than 70% residual activity at pH 5.8-11.0 and carried 100% thermostability as high as 60 °C. In addition, it showed 68% residual activity at 70 °C. The N-terminal amino acid sequence of GluB55 was Ala-Asn-Pro-Glu-Leu-Val-Asn-X-Gln-Ala-X-X-Ala-X-Gln-Gly. The enzyme activity was stimulated by Co²⁺ (158.6%), Zn²⁺ (211.1%), Mn²⁺ (264.4%), and Ba²⁺ (211.4%). Enzyme kinetics showed K_m and V_max values of 0.022 mg mL^-1 and 994.56 ± 3.72 U mg^-1, respectively. Q₁₀ was calculated to be 1.12. ∆H, ∆G, and ∆S were low revealing that the formation of the transition phase and conversion to the product is very well organized. The lower the free energy change (∆G), the more feasible is the reaction.

Production and partial characterization of β-1,3-glucanase obtained from Rhodotorula oryzicola

The current study aims to assess the kinetics of population growth of Rhodotorula oryzicola and the production of β-1,3-glucanase (EC 3.2.1.39) enzyme by this yeast. It also aims to obtain the optimum conditions of β-1,3-glucanase enzymatic activity by varying the pH as well as to study the enzyme thermostability. R. oryzicola population doubled within 12 hr. During this period, 9.26 generations were obtained, with 1 hr and 29 min of interval from one generation to the other, with specific growth rate (µ) of 0.15 (hr^-1). The entire microorganism growth process was monitored during β-1,3-glucanases production, and the maximum value was obtained in the stationary phase in the 48-hr fermentation period. pH and temperature optimum values were 4.7 and 96°C, respectively. The enzyme maintained 88% of its activity when submitted to the temperature of 90°C for an incubation period of 1 hr. The results show that the enzyme can be used in industrial processes that require high temperatures and acidic pH.