Building bone tissue: matrices and scaffolds in physiology and biotechnology

Micro/Nano Scaffolds for Osteochondral Tissue Engineering

To develop an osteochondral tissue regeneration strategy it is extremely important to take into account the multiscale organization of the natural extracellular matrix. The structure and gradients of organic and inorganic components present in the cartilage and bone tissues must be considered together. Another critical aspect is an efficient interface between both tissues. So far, most of the approaches were focused on the development of multilayer or stratified scaffolds which resemble the structural composition of bone and cartilage, not considering in detail a transitional interface layer. Typically, those scaffolds have been produced by the combined use of two or more processing techniques (microtechnologies and nanotechnologies) and materials (organic and inorganic). A significant number of works was focused on either cartilage or bone, but there is a growing interest in the development of the osteochondral interface and in tissue engineering models of composite constructs that can mimic the cartilage/bone tissues. The few works that give attention to the interface between cartilage and bone, as well as to the biochemical gradients observed at the osteochondral unit, are also herein described.

ToF-SIMS study of differentiation of human bone-derived stromal cells: new insights into osteoporosis

Lipids have numerous important functions in the human body, as they form the cells' plasma membranes and play a key role in many disease states, presumably also in osteoporosis. Here, the fatty acid composition of the outer plasma membranes of cells differentiated into the osteogenic and adipogenic direction is studied with surface-sensitive time-of-flight secondary ion mass spectrometry (ToF-SIMS). For data evaluation, principal component analysis (PCA) is applied. Human (bone-derived) mesenchymal stromal cells (hMSCs) from an osteoporotic donor and a control donor are compared to reveal differences in the fatty acid composition of the membranes. The chemical information is correlated to staining and real-time quantitative polymerase chain reaction (rt-qPCR) results to provide insight into the gene expression of several differentiation markers on the RNA level. Adipogenic differentiation of hMSCs from a non-osteoporotic donor correlates with increased relative intensities of all fatty acids under investigation. After osteogenic differentiation of non-osteoporotic cells, the relative mass signal intensities of unsaturated fatty acids such as oleic and linoleic acids are increased. However, the osteoporotic cells show increased levels of palmitic acid in the plasma membrane after exposure to osteogenic differentiation conditions, which correlates to an immature differentiation state relative to non-osteoporotic osteogenic cells. This immature differentiation state is confirmed by increased early osteogenic differentiation factor Runx2 on RNA level and by less calcium mineralization spots seen in von Kossa staining and ToF-SIMS images. Graphical abstract Time-of-flight secondary ion mass spectrometry is applied to analyze the fatty acid composition of the outer plasma membranes of cells differentiated into the adipogenic and osteogenic direction. Cells from an osteoporotic and a control donor are compared to reveal differences due to differentiation and disease stage of the cells.

Effect of Polymer Infiltration on the Flexural Behavior of β-Tricalcium Phosphate Robocast Scaffolds

The influence of polymer infiltration on the flexural strength and toughness of β-tricalcium phosphate (β-TCP) scaffolds fabricated by robocasting (direct-write assembly) is analyzed. Porous structures consisting of a tetragonal three-dimensional lattice of interpenetrating rods were impregnated with biodegradable polymers (poly(lactic acid) (PLA) and poly(ε-caprolactone) (PCL)) by immersion of the structure in a polymer melt. Infiltration increased the flexural strength of these model scaffolds by a factor of 5 (PCL) or 22 (PLA), an enhancement considerably greater than that reported for compression strength of analogue materials. The greater strength improvement in bending was attributed to a more effective transfer of stress to the polymer under this solicitation since the degree of strengthening associated to the sealing of precursor flaws in the ceramic rod surfaces should remain unaltered. Impregnation with either polymer also improved further than in compression the fracture energy of the scaffolds (by more than two orders of magnitude). This increase is associated to the extraordinary strengthening provided by impregnation and to a crack bridging toughening mechanism produced by polymer fibrils.

Long-term biocompatibility evaluation of 0.5 % zinc containing hydroxyapatite in rabbits

This study investigates the long-term biocompatibility of 0.5 % zinc-containing hydroxyapatite compared with hydroxyapatite. Spheres (425 < ∅ < 550) of both materials were produced by extrusion of ceramic slurry in calcium chloride and characterized by FTIR, XRD, XRF and SEM. Fifteen White New Zealand rabbits were submitted to general anesthesia, and an perforation (2 mm), was made in each tibia, one for zinc-containing hydroxyapatite sphere implantation and one for hydroxyapatite sphere implantation. After 26, 52 and 78 weeks, the animals were euthanized, and the fragment containing the biomaterial was harvested. A 30-50 μm section was obtained for histological analysis in bright field and polarized light. SEM images revealed similar morphologies between the tested biomaterials. Histological analysis showed that there was no difference between the test groups. The morphometric analysis, however, indicates that there was a greater absorption. The materials are biocompatible, promote osteogenesis and that the zinc-containing hydroxyapatite microspheres were absorbed more quickly.

Mimicking nanofibrous hybrid bone substitute for mesenchymal stem cells differentiation into osteogenesis

Mimicking hybrid extracellular matrix is one of the main challenges for bone tissue engineering (BTE). Biocompatible polycaprolactone/poly(α,β)-DL-aspartic acid/collagen nanofibrous scaffolds were fabricated by electrospinning and nanohydroxyapatite (n-HA) was deposited by calcium phosphate dipping method for BTE. Human mesenchymal stem cells (hMSCs) were cultured on these hybrid scaffolds to investigate the cell proliferation, osteogenic differentiation by alkaline phosphatase activity, mineralization, double immunofluorescent staining using CD90 and expression of osteocalcin. The present study indicated that the PCL/PAA/collagen/n-HA scaffolds promoted greater osteogenic differentiation of hMSCs, proving to be a potential hybrid scaffolds for BTE.

Precipitation of nanohydroxyapatite on PLLA/PBLG/Collagen nanofibrous structures for the differentiation of adipose derived stem cells to osteogenic lineage

Tissue engineering and nanotechnology have enabled engineering of nanostructured materials to meet the current challenges in bone treatment owing to rising occurrence of bone diseases, accidental damages and defects. Poly(L-lactic acid)/Poly-benzyl-L-glutamate/Collagen (PLLA/PBLG/Col) scaffolds were fabricated by electrospinning and nanohydroxyapatite (n-HA) was deposited by calcium-phosphate dipping method for bone tissue engineering (BTE). The abundance and accessibility of adipose derived stem cells (ADSC) may prove to be novel cell therapeutics for bone repair and regeneration. ADSCs were cultured on these scaffolds and were induced to undergo osteogenic differentiation in the presence of PBLG/n-HA for BTE. The cell-biomaterial interactions were analyzed using cell proliferation, SEM and CMFDA dye extraction techniques. Osteogenic differentiation of ADSC was confirmed using alkaline phosphatase activity (ALP), mineralization (ARS) and dual immunofluorescent staining using both ADSC marker protein and Osteocalcin, which is a bone specific protein. The utmost significance of this study is the bioactive PBLG/n-HA biomolecule introduced on the polymeric nanofibers to regulate and improve specific biological functions like adhesion, proliferation and differentiation of ADSC into osteogenic lineage. This was evident from the immunostaining and CMFDA images of ADSCs showing cuboidal morphology, characteristic of osteogenic lineage. The observed results proved that the PLLA/PBLG/Col/n-HA scaffolds promoted greater osteogenic differentiation of ADSC as evident from the enzyme activity and mineralization profiles for bone tissue engineering.

The effect of sintering temperature on the microstructure and mechanical properties of a bioceramic bone scaffold

Micro and nanostructural properties are believed to play a critical role in the osteoinductive capacity of bioceramic bone scaffolds. Physical characteristics also play an important role for optimum biological performance, including osteoconductivity and strength. In this study microstructural and nano-mechanical properties of a bioceramic bone scaffold were investigated as a function of the sintering temperature in the range of 950-1150 °C, through the use of scanning electron microscopy (SEM), X-ray diffraction (XRD) and nanoindentation testing. Although the samples presented the same crystallographic phase, an increase in sintering temperature resulted in increased grain size, density and crystallite size. The intrinsic mechanical properties were measured by nanoindentation testing and analyzed with the Oliver-Pharr method. The nanoindentation tests consisted of a series of fourteen partial unload tests (n=14 per treatment) of twelve steps ranging from 1 to 12 mN. Statistically significant increases in hardness and elastic modulus were measured for increasing sintering temperature. These results support the development of clinically successful bioceramic scaffolds with mechanical properties that encourage bone ingrowth and provide structural integrity.

Dymeclin, the gene underlying Dyggve-Melchior-Clausen syndrome, encodes a protein integral to extracellular matrix and golgi organization and is associated with protein secretion pathways critical in bone development

Dyggve-Melchior-Clausen syndrome (DMC), a severe autosomal recessive skeletal disorder with mental retardation, is caused by mutation of the gene encoding Dymeclin (DYM). Employing patient fibroblasts with mutations characterized at the genomic and, for the first time, transcript level, we identified profound disruption of Golgi organization as a pathogenic feature, resolved by transfection of heterologous wild-type Dymeclin. Collagen targeting appeared defective in DMC cells leading to near complete absence of cell surface collagen fibers. DMC cells have an elevated apoptotic index (P< 0.01) likely due to a stress response contingent upon Golgi-related trafficking defects. We performed spatiotemporal mapping of Dymeclin expression in zebrafish embryos and identified high levels of transcript in brain and cartilage during early development. Finally, in a chondrocyte cDNA library, we identified two novel secretion pathway proteins as Dymeclin interacting partners: GOLM1 and PPIB. Together these data identify the role of Dymeclin in secretory pathways essential to endochondral bone formation during early development.

Type I collagen gel in seeding medium improves murine mesencymal stem cell loading onto the scaffold, increases their subsequent proliferation, and enhances culture mineralization

Collagen I as a major organic component of bone matrix may be important for establishment and maintenance of mesenchymal stem cells (MSCs) in osteogenic 3D culture. To explore this subject, murine marrow-derived MSCs were seeded onto hybrid scaffolds of alginate/gelatin/beta-tricalcium phosphate in a medium either with or without collagen I gel. The cultures were then provided with osteogenic medium and incubated for three weeks during which loading efficiency, cell proliferation and the culture mineralization were quantified and statistically compared. According to the findings, in culture with collagen, although about 60% of the cells left the scaffolds, the remaining cells, however, proliferated extensively with a population doubling number (PDN) equivalent to 2.46 +/- 0.31 and organized as cell aggregations that were heavily mineralized (calcium concentration = 1.017 +/- 0.141 mM per scaffold), whereas in the culture without collagen, about 75% of the cells left the scaffolds, less cell proliferation occurred (PDN = 1.48 +/- 0.29) and no cell aggregation was observed. The calcium concentration in this culture was 0.185 +/- 0.029 mM per scaffold. All these differences were statistically significant (p < 0.001). Taken together, these data suggested that using the collagen I in seeding medium could help mMSCs loading into the scaffold, enhance their subsequent proliferation, and increase calcium deposition in 3D culture system.

Severe osteogenesis imperfecta in cyclophilin B-deficient mice

Osteogenesis Imperfecta (OI) is a human syndrome characterized by exquisitely fragile bones due to osteoporosis. The majority of autosomal dominant OI cases result from point or splice site mutations in the type I collagen genes, which are thought to lead to aberrant osteoid within developing bones. OI also occurs in humans with homozygous mutations in Prolyl-3-Hydroxylase-1 (LEPRE1). Although P3H1 is known to hydroxylate a single residue (pro-986) in type I collagen chains, it is unclear how this modification acts to facilitate collagen fibril formation. P3H1 exists in a complex with CRTAP and the peptidyl-prolyl isomerase cyclophilin B (CypB), encoded by the Ppib gene. Mutations in CRTAP cause OI in mice and humans, through an unknown mechanism, while the role of CypB in this complex has been a complete mystery. To study the role of mammalian CypB, we generated mice lacking this protein. Early in life, Ppib-/- mice developed kyphosis and severe osteoporosis. Collagen fibrils in Ppib-/- mice had abnormal morphology, further consistent with an OI phenotype. In vitro studies revealed that in CypB–deficient fibroblasts, procollagen did not localize properly to the golgi. We found that levels of P3H1 were substantially reduced in Ppib-/- cells, while CRTAP was unaffected by loss of CypB. Conversely, knockdown of either P3H1 or CRTAP did not affect cellular levels of CypB, but prevented its interaction with collagen in vitro. Furthermore, knockdown of CRTAP also caused depletion of cellular P3H1. Consistent with these changes, post translational prolyl-3-hydroxylation of type I collagen by P3H1 was essentially absent in CypB–deficient cells and tissues from CypB–knockout mice. These data provide significant new mechanistic insight into the pathophysiology of OI and reveal how the members of the P3H1/CRTAP/CypB complex interact to direct proper formation of collagen and bone.

Osteogenesis Imperfecta (OI), also known as “brittle bone disease,” is an inherited condition with multiple defects in collagen-containing structures, including the bones, skin, and other connective tissues. Patients with OI suffer from short stature, scoliosis, thin skin, hearing loss, and, most notably, fragile bones that break with little or no trauma. Although many cases are due to dominantly inherited point mutations in the collagen genes, autosomal recessive forms have been described due to defects in the genes for Prolyl-3-Hydroxylase-1 (LEPRE1) and Cartilage-Associated Protein (CRTAP), proteins that modify newly synthesized procollagen. Some patients with OI do not have mutations in any of the known disease-related genes. Here, through the use of newly generated knockout mice, we identify the endoplasmic-reticulum resident prolyl-isomerase cyclophilin B (CypB) as a new autosomal recessive OI gene in mice. CypB, P3H1, and CRTAP were shown to have interrelated effects in maintaining their respective protein levels and ability to bind to collagen. These studies enhance our understanding about how collagen, the most abundant protein in the body, becomes properly assembled to form bones with adequate strength.

Non-mulberry silk gland fibroin protein 3-D scaffold for enhanced differentiation of human mesenchymal stem cells into osteocytes

This study investigates the potential of three-dimensional (3-D) scaffolds of wild non-mulberry tropical tasar silk gland fibroin protein as substratum for osteogenic differentiation of human mesenchymal stem cells (hMSCs). The novelty of the study lies in the fabrication of scaffolds from non-bioengineered silk fibroin directly extracted from the glands of non-mulberry tropical tasar silkworms using sodium dodecyl sulfate dissolution protocol and its osteogenic application using single- and double-seeding methods. The scaffolds were mechanically robust and showed homogenous pore distribution within the scaffold. hMSCs were seeded on the scaffolds and were cultured for up to 28days under static conditions in osteogenic media. Osteogenic differentiation of hMSCs seeded on fibroin scaffolds resulted in extensive mineralization with the formation of large calcium nodules, higher alkaline phosphatase activity and intense von Kossa staining. Real-time studies revealed higher transcript levels for osteopontin (OS) and bone sialoprotein (IBSP) under double-seeded conditions as compared to single-seeded scaffolds. Histological analysis showed the development of osteoblastic cells and large calcified nodules. The development and spreading of nuclei and actin filaments on fibroin matrices were revealed through confocal studies. The results suggest the suitability of non-mulberry silk-fibroin protein 3-D scaffolds as natural biomaterial for potential in vitro bone-tissue engineering applications.

Bone differentiation of marrow-derived mesenchymal stem cells using beta-tricalcium phosphate-alginate-gelatin hybrid scaffolds

The aim of the present study was to establish a 3D culture system for bone differentiation of mesenchymal stem cells (MSCs), using a new hybrid sponge. To manufacture the scaffold, a composite of beta-tricalcium phosphate-alginate-gelatin was prepared and cast as pellets of 1 cm diameter. The sponge was then fabricated by drying in freeze-dryer for 12 h. The porosity, mean pore size, compressive modulus and strength of the composite sponge fabricated in this study were 89.7%, 325.3 microm, 1.82 and 0.196 MPa, respectively. To establish a 3D culture system, the rat bone marrow-derived MSCs were suspended in 500 microl diluted collagen gel, loaded into the porous sponge and provided with medium with or without osteogenic supplements for 3 weeks. The day after loading, the cells appeared in the scaffold's internal spaces, where later some of them from either culture survived by anchoring on the surfaces. At the end of cultivation period, individually adhered cells from both cultures were observed to be replaced by cell aggregates, in which mineralized matrix was detected by alizarin red staining. Furthermore, RT-PCR analysis indicated that the bone-specific gene osteocalcin was expressed in cultures in both the presence and absence of the osteogenic supplements. Taken together, it seems that the studied scaffolds are cell-compatible and, more importantly, possess some osteo-inductive properties.

Effect of bone sialoprotein and collagen coating on cell attachment to TICER and pure titanium implant surfaces

To improve integration between implants and biological tissues, this study compared bone sialoprotein (BSP) as a surface-coating material against the major organic and inorganic components of bone, collagen type I and hydroxyapatite (TICER). The expression of osteocalcin, osteonectin and transforming growth factor ss was evaluated using immunohistochemical staining procedures. The distribution patterns of osteoblasts on the surface of pure titanium with a smooth machined surface and a rough surface (TICER) were determined by image processing using confocal laser scanning microscopy. The results compared to uncoated control materials showed that, at all times investigated, the number of cells on the surface of the TICER and pure titanium samples differed significantly (P<0.1), demonstrating the superiority of TICER over pure titanium in this respect. For pure titanium implants, collagen-precoated surfaces were not beneficial for the attachment of bone-derived cells with the exception of day 3 in vitro (P<0.01). BSP-precoated implant surfaces displayed non-significantly higher numbers of settled cells. BSP-precoated implant surfaces were beneficial for osteoinduction as revealed by osteocalcin and osteonectin expression. BSP precoating of the rough TICER implant surface enhanced the osteoinductive effect much more than did collagen precoating. These results contribute to the consideration of at least two distinct pathways of osseointegration.

3D scaffolds for bone marrow stem cell support in bone repair

Bone tissue repair is one of the major concerns of regenerative medicine. The current need for tissue replacements has necessitated the development of a new science termed ‘bone tissue engineering’. The basic organization of bone tissue requires the design and fabrication of a porous 3D structure or ‘scaffold’ to contain the bone-forming cells. This scaffold should be formulated from biocompatible, osteoconductive materials that are not immunoreactive. 3D scaffolds provide the necessary support for cells to proliferate and maintain their capacity to differentiate and scaffolds containing bone marrow-derived osteoprogenitors can be employed within implants to enhance bone repair. The complex construct is intended to mimic the native in vivo microenvironment and this demands construction of bioactive scaffolds that are also capable of supporting vascularization as well as cell proliferation and osteogenic differentiation. 3D bioactive scaffolds containing committed osteoprogenitors can provide a promising surgical tool for bone tissue engineering directed at orthopedic and cranio-maxillofacial clinical applications.

Pham Q, Sharma U, Sikavitsas VI, Jansen JA, Mikos AG. In vitro generated extracellular matrix and fluid shear stress synergistically enhance 3D osteoblastic differentiation

This study instituted a unique approach to bone tissue engineering by combining effects of mechanical stimulation in the form of fluid shear stresses and the presence of bone-like extracellular matrix (ECM) on osteodifferentiation. Rat marrow stromal cells (MSCs) harvested from bone marrow were cultured on titanium (Ti) fiber mesh discs for 12 days in a flow perfusion system to generate constructs containing bone-like ECM. To observe osteodifferentiation and bone-like matrix deposition, these decellularized constructs and plain Ti fiber meshes were seeded with MSCs (Ti/ECM and Ti, respectively) and cultured in the presence of fluid shear stresses either with or without the osteogenic culture supplement dexamethasone. The calcium content, alkaline phosphatase activity, and osteopontin secretion were monitored as indicators of MSC differentiation. Ti/ECM constructs demonstrated a 75-fold increase in calcium content compared with their Ti counterparts after 16 days of culture. After 16 days, the presence of dexamethasone enhanced the effects of fluid shear stress and the bone-like ECM by increasing mineralization 50-fold for Ti/ECM constructs; even in the absence of dexamethasone, the Ti/ECM constructs exhibited approximately a 40-fold increase in mineralization compared with their Ti counterparts. Additionally, denatured Ti/ECM* constructs demonstrated a 60-fold decrease in calcium content compared with Ti/ECM constructs after 4 days of culture. These results indicate that the inherent osteoinductive potential of bone-like ECM along with fluid shear stresses synergistically enhance the osteodifferentiation of MSCs with profound implications on bone-tissue-engineering applications.

Ectopic bone formation in rats: the importance of the carrier

Much research has been done to develop the ideal bone graft substitute (BGS). One approach to develop this ideal BGS is the use of growth factors, but for this approach osteoprogenitor cells are needed at the site of reconstruction. An alternative is a cell-based approach, where enough cells are provided to form bone in a carrier material. In previous studies of our group, titanium (Ti) carriers have been used, because of the excellent mechanical properties and the bone-compatibility of this material. On the other hand, calcium phosphate (CaP) ceramics are known for their excellent osteoconductivity. The aim of this study is to investigate the influence of the carrier in a cell-based bone regeneration approach, whereby we hypothesize that CaP-ceramic implants will induce more bone formation than Ti-fiber implants, in the same animal model as our previous experiment. Ti-fiber mesh implants and ceramic implants were seeded with rat bone marrow cells (RBM) and implanted subcutaneously. Histological analysis after one, three and six weeks showed differences in the way of bone formation in the two groups: bone appeared to grow from the center to the periphery of the implant in the titanium group, while bone formation in the ceramic group occurred through the whole implant. Histomorphometrical analysis after one week showed very limited bone formation for both the titanium and ceramic group. At three weeks, the amount of bone formation was increased till about 10% for the titanium group and 18% for the ceramic group. No significant difference between the two groups could be observed. In the six week group, the bone formation was 6% (Ti) and 23% (CaP), respectively (P < 0.001). Further, bone formation started earlier in the CaP-ceramic scaffolds than in the Ti scaffolds. Our hypothesis could be confirmed: ceramic implants induce more bone formation than titanium implants.

Biomaterial challenges and approaches to stem cell use in bone reconstructive surgery

As life expectancy increases, so does the need to treat large bone defects. New biomaterials combined with osteogenic cells are now being developed as an alternative to autogenous bone grafts. The goal is to make the stem cells adhere to the scaffold, and then grow to differentiate into functional osteogenic cells and organize into healthy bone as the scaffold degrades. Decisive improvements have been made in the fields of stem cell biology, 3-D scaffold fabrication and tissue engineering, but the ideal bone substitute that fulfils all functional and safety requirements has yet to be developed.

Bone tissue engineering applications in craniofacial reconstructive surgery

Tissue and bone engineering are essential components for understanding of the healing and regeneration of bone and adjacent tissues. Recently, interest in restoring the contour and shape in the configuration of the reconstructed bone has become a priority for craniofacial surgeons. This article discusses the latest advancements in bone tissue engineering applications.