Effect of denture cleansers on metal ion release and surface roughness of denture base materials

Strategies for Preventing and Treating Oral Mucosal Infections Associated with Removable Dentures: A Scoping Review

Oral infections occur due to contact between biofilm rich in Candida albicans formed on the inner surface of complete dentures and the mucosa. This study investigated historical advances in the prevention and treatment of oral mucosal infection and identified gaps in the literature. Bibliographic research was conducted, looking at PubMed, Embase, Web of Science, and Scopus, where 935 articles were found. After removing duplicates and excluding articles by reading the title and abstract, 131 articles were selected for full reading and 104 articles were included. Another 38 articles were added from the gray literature. This review followed the PRISMA-ScR guidelines. The historical period described ranges from 1969 to 2023, in which, during the 21st century, in vitro and in vivo studies became more common and, from 2010 to 2023, the number of randomized controlled trials increased. Among the various approaches tested are the incorporation of antimicrobial products into prosthetic materials, the improvement of oral and denture hygiene protocols, the development of synthetic and natural products for the chemical control of microorganisms, and intervention with local or systemic antimicrobial agents. Studies report good results with brushing combined with sodium hypochlorite, and new disinfectant solutions and products incorporated into prosthetic materials are promising.

A comparative evaluation of effect of denture cleansers on color stability, surface roughness and hardness of polyamide denture base material

CONTEXT

Different denture cleansers have an effect on color and different surface properties of polyamide denture base material. Thus, selecting a denture cleanser solution for polyamide denture base materials should be based on the properties of the denture cleanser itself. The present in vitro study is aimed to evaluate and compare the effect of different denture base cleansers on color, surface roughness and hardness of polyamide denture base material.

METHODS AND MATERIAL

Thirty specimens of commercially available polyamide denture base material were fabricated and divided into three groups of 10 each. Specimens from each group were immersed in different denture cleansers (sodium perborate, thyme oil and ozonated water) for 10 mins per day for 180 days. Initial and final color, surface roughness and surface hardness of each specimen were measured and the difference was calculated. Data was tabulated and subjected to statistical analysis using One way ANOVA for pair wise comparison.

RESULTS

Polyamide denture base resin exhibited some degree of change in color, surface roughness, and surface hardness in all denture cleansers but was not statistically significant.

CONCLUSIONS

The choice of denture cleanser for different denture base resins should be based on the chemistry of resin and the cleanser, denture cleanser concentration and duration of immersion.

Surveillance study on the application of titanium and its alloys to removable dental prostheses

This review describes individual studies of removable dental prostheses, evaluated their performance and clinical applicability for the proposal to expand health insurance coverage of titanium and its alloys to removable dental prostheses. Titanium and its alloys have become clinically applicable as prosthetic materials by improving dental casting systems. They have high biosafety and good mechanical properties, are excellent substitutes for the silver-palladium-gold alloys for casting, and are highly useful for removable dental prostheses. Therefore, the introduction of health insurance coverage for removable dental prostheses made of titanium and its alloys is worthy of consideration.

Evaluation of microhardness in two types of denture bases after using sodium hypochlorite and NatureDent disinfecting agents

Background. Chemical agents, in combination with mechanical methods, play an important role in reducing microbial plaque on denture surfaces. However, these methods might change the mechanical behavior of acrylic resins, including microhardness and surface roughness. This in vitro study investigated the effect of two disinfectants, i.e., water and sodium hypochlorite, on the microhardness of conventional heat-cured and TiO₂ nanoparticle-reinforced acrylic resins. Methods. Sixty acrylic resin specimens were divided into two groups, and the samples in each group were randomly assigned to three subgroups (n=10). Heat-cured specimens and 1 wt% TiO₂ acrylic resin were prepared and immersed in three solutions: water, a solution prepared with NatureDent pills, and 1% sodium hypochlorite for 30, 60, and 90 days. Microhardness tests were performed on each sample at each immersion stage. The data were analyzed using descriptive statistical methods, three-way and one-way ANOVA, repeated-measures t test, and Tukey HSD tests using SPSS 17. P values<0.05 were considered significant. Results. All three independent parameters, including resin, solution, and time, significantly affected microhardness (P<0.05). The microhardness of both specimen types, i.e., conventional heat-cured and TiO₂ nanoparticle-reinforced acrylic resins, immersed for 30, 60, and 90 days, was the highest and lowest in water and hypochlorite solutions, respectively. Regarding 90 days, the microhardness values of conventional heat-cured and TiO₂ nanoparticle-reinforced acrylic resins were 17.050±0.094 and 19.953±0.053 in water, 15.675±0.069 and 18.965±0.037 in hypochlorite, and 16.713±0.122 and 19.39±20.113 in NatureDent solutions, respectively. Conclusion. Disinfecting two types of acrylic resin specimens decreased their microhardness as a function of immersion time for up to 90 days in the three solutions. However, the magnitude of hardness lost was less for TiO₂ nanoparticles-reinforced acrylic resin.

Phytotherapy in the management of denture stomatitis: A systematic review and meta-analysis of randomized controlled trials

Medicinal plant extracts are commonly applied for infectious diseases and are perceived as alternatives to conventional antimicrobial agents. We aimed to confirm the efficacy of phytotherapy for denture stomatitis compared with conventional therapies and placebo. A comprehensive literature search was conducted in Pubmed, Embase, Cochrane Library (CENTRAL), Scopus, and Web of Science, in addition to manual searching. Randomized controlled trials (RCTs) published in English, and studying the treatment of denture stomatitis with herbal medicines, were included. The outcome measures included the relief of clinical signs, reduced Candida colony counts, adverse effects, and patient satisfaction. Nineteen RCTs were included for a systematic review based on selection criteria. Two of them were analyzed using a random-effects model. There was no difference in the relief of clinical signs (odds ratio (OR) = 0.96; 95% confidence interval (CI): 0.43-2.15) and microbiological improvement (OR = 1.74; 95% CI: 0.55-5.45) between propolis and miconazole. Most of the included studies showed that phytomedicines had fewer side effects and more patient satisfaction than antifungals or disinfectants. However, further RCTs with more standardly prepared herbal formulations are required to verify the clinical efficacy of phytotherapy as an alternative or adjunctive therapy for denture stomatitis.

Effect of Denture Cleansers on Cobalt-Chromium Alloy Surface: A Simulated Period of 5 Years' Use

PURPOSE

To compare the effect of solutions of effervescent tablets (ET), cetylpyridinium chloride (CPC), and experimental solutions of Ricinus communis on the surface of cobalt-chromium (Co-Cr) alloys.

MATERIALS AND METHODS

Fifty-five specimens of Co-Cr were prepared by the lost-wax casting method using circular patterns (∅12 × 3 mm). The specimens were randomly divided into 5 groups: deionized water (control); 2% R. communis; 10% R. communis; ET, and CPC. The surface roughness of specimens (n = 10) was evaluated before immersion (baseline), and at simulated times of ½, 1, 2, 3, 4, and 5 years, by laser confocal microscope (Sa, μm) and profilometer (Ra, μm). The surface topography and chemical composition (n = 1) was qualitatively analyzed with scanning electron microscopy (SEM), and energy dispersive X-ray spectrometry (EDS). Data were subjected to Kruskal-Wallis followed by Dunn tests, and Friedman followed by Wilcoxon tests (α = 0.05).

RESULTS

For Sa, there was no difference for the solution factor. For the time factor a significant difference was found with 2% R. communis solution among baseline and ½, 2, 3, and 5 years (p < 0.001) and with 10% R. communis solution between 1 and 2 years (p = 0.007), with decreasing roughness over time. For Ra, cetylpyridinium chloride exhibited less roughness than 10% R. communis solution in ½ (p = 0.048) and 5 years (p = 0.013). In the SEM and EDS analysis the solutions did not present deleterious effects or changes in the chemical composition on the surfaces.

CONCLUSIONS

Although a significant difference was found for the roughness, the results, below 0.2 μm, are clinically acceptable. Thus, all solutions can be used safely in removable partial denture cleaning for a period of 5 years.

The effect of different chemical intra-oral prostheses cleansers on the surface properties of Parylene-coated PMMA

The purpose of this study was to investigate the effect of different chemical intra-oral prosthesis cleansers on the surface properties of Parylene-C coated and non-coated polymethyl methacrylate (PMMA). A total of 120 PMMA samples were prepared. Half of the samples were coated with 10 µm of Parylene-C. Samples were exposed to either air (control) or one of two types of denture cleansers, an alkaline peroxide cleanser (Steradent) or a neutral peroxide cleanser with enzyme (Poligrip). Surface roughness (Ra) and surface free energy (SFE) values were measured and compared between groups. Scanning electron microscopy was used for visual analysis. The samples coated with Parylene exhibited significantly lower mean Ra values compared to the non-coated samples (p<0.001). Immersion in Steradent increased the roughness of non-coated PMMA, but its effect was minimized on the coated surfaces. SFE increased for the samples exposed to air and Poligrip, but decreased for the samples exposed to Steradent.

Antimicrobial action of sodium hypochlorite and castor oil solutions for denture cleaning - in vitro evaluation

The objective of this in vitro study was to evaluate the antimicrobial action of sodium hypochlorite (0.25% and 0.50%) and 10% castor oil solutions against specific microorganisms, by counting Colony Forming Units (CFU) of clinically important bacteria and Candida species. Acrylic resin specimens (n = 320; Lucitone 550) were obtained from square metal matrices (10 x 10 x 2 mm), sterilized by microwave (650W, for 6 minutes) and contaminated by Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans, Bacillus subtilis, Escherichia coli, Streptococcus mutans, Enterococcus faecalis and Candida glabrata. The specimens were immersed for 20 minutes in one of the following hygiene solutions (n = 10/each): A - 0.25% Sodium hypochlorite; B - 0.5% Sodium hypochlorite; C - 10% Castor oil solution; and D (Control) - saline. Adhered cells were suspended and inoculated into a selective solid medium (37ºC for 24 h). The Student's t-test (α = 0.05) was performed to compare log10(CFU+1)/mL between Groups C and D. The results showed that sodium hypochlorite (0.25% and 0.5%) completely eliminated all detectable microorganisms. The castor oil solution eliminated B. subtilis and reduced counts for other strains. Differences between C and D were significant (p < 0.05) for all species except for E. faecalis. Both sodium hypochlorite solutions (0.25% and 0.5%) were effective in eliminating all microorganisms evaluated, and may be useful as cleaning solutions for complete dentures. The castor oil solution provided moderate efficacy and performed differently on the tested species, with the strongest effect on B. subtilis and with non-significant action on E. faecalis.

Efficacy of citric acid denture cleanser on the Candida albicans biofilm formed on poly(methyl methacrylate): effects on residual biofilm and recolonization process

BACKGROUND

It is well known that the use of denture cleansers can reduce Candida albicans biofilm accumulation; however, the efficacy of citric acid denture cleansers is uncertain. In addition, the long-term efficacy of this denture cleanser is not well established, and their effect on residual biofilms is unknown. This in vitro study evaluated the efficacy of citric acid denture cleanser treatment on C. albicans biofilm recolonization on poly(methyl methacrylate) (PMMA) surface.

METHODS

C. albicans biofilms were developed for 72 h on PMMA resin specimens (n = 168), which were randomly assigned to 1 of 3 cleansing treatments (CTs) overnight (8 h). CTs included purified water as a control (CTC) and two experimental groups that used either a 1:5 dilution of citric acid denture cleanser (CT5) or a 1:8 dilution of citric acid denture cleanser (CT8). Residual biofilms adhering to the specimens were collected and quantified at two time points: immediately after CTs (ICT) and after cleaning and residual biofilm recolonization (RT). Residual biofilms were analyzed by quantifying the viable cells (CFU/mL), and biofilm architecture was evaluated by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). Denture cleanser treatments and evaluation periods were considered study factors. Data were analyzed using two-way ANOVA and Tukey's Honestly Significant Difference (HSD) test (α = 0.05).

RESULTS

Immediately after treatments, citric acid denture cleansing solutions (CT5 and CT8) reduced the number of viable cells as compared with the control (p < 0.01). However, after 48 h, both CT groups (CT5 and CT8) showed biofilm recolonization (p < 0.01). Residual biofilm recolonization was also detected by CLSM and SEM analysis, which revealed a higher biomass and average biofilm thickness for the CT8 group (p < 0.01).

CONCLUSION

Citric acid denture cleansers can reduce C. albicans biofilm accumulation and cell viability. However, this CT did not prevent biofilm recolonization.

Effect of cleanser solutions on the color of acrylic resins associated with titanium and nickel-chromium alloys

This study evaluated the effect of cleanser solutions on the color of heat-polymerized acrylic resin (HPAR) and on the brightness of dental alloys with 180 immersion trials. Disk-shaped specimens were made with I) commercially pure titanium, II) nickel-chromium-molybdenum-titanium, III) nickel-chromium molybdenum, and IV) nickel-chromium-molybdenum beryllium. Each cast disk was invested in the flasks, incorporating the metal disk into the HPAR. The specimens (n=5) were then immersed in solutions containing: 0.05% sodium hypochlorite, 0.12% chlorhexidine digluconate, 0.500 mg cetylpyridinium chloride, a citric acid tablet, one of two different sodium perborate/enzyme tablets, and water. The color measurements (∆E) of the HPAR were determined by a colorimeter in accordance with the National Bureau of Standards. The surface brightness of the metal was visually examined for the presence of tarnish. The results (ANOVA; Tukey test-α=0.05) show that there was a significant difference between the groups (p<0.001) but not among the solutions (p=0.273). The highest mean was obtained for group III (5.06), followed by group II (2.14). The lowest averages were obtained for groups I (1.33) and IV (1.35). The color changes in groups I, II and IV were slight but noticeable, and the color change was considerable for group III. The visual analysis showed that 0.05% sodium hypochlorite caused metallic brightness changes in groups II and IV. It can be concluded that the agents had the same effect on the color of the resin and that the metallic alloys are not resistant to the action of 0.05% sodium hypochlorite.

Efficacy of denture cleansers in reducing microbial counts from removable partial dentures: a short-term clinical evaluation

This clinical study investigated if daily immersion in denture cleansers reduces microbial counts on removable partial denture's (RPD) biofilm. Twenty-five RPD wearer volunteers were selected and instructed to complement the hygiene of their dentures by immersing them in an enzymatic peroxide-based denture cleanser (Polident® 3 minute) once a day for 3 min for a period of 15 days. The biofilm was collected from RPD surfaces with a swab immediately before (baseline) and after the experimental period. The samples were placed in sterile saline solution, sonicated at 7 W and then plated on specific culture media to quantify total microorganisms, total streptococci and Candida spp. counts. Data from both collections were compared by paired t-test (α=0.05). It was observed a significant reduction on total microorganisms' counts in RPD biofilm after denture cleanser use (p=0.007). This reduction was also observed for total streptococci (p=0.0428), but no difference was observed on Candida spp. counts. It was concluded that daily use of denture cleanser improved denture hygiene by reducing total microorganisms and total streptococci from RPD surface but had no effect on Candida spp. population.