Polímeros reciclados para contato com alimentos

Thermal Stability and Crystallization Behavior of Contaminated Recycled Polypropylene for Food Contact

Polypropylene is one of the most widely used polymers, especially in the food packaging industry, which causes negative environmental effects. Recycling is a good option to partially solve this environmental problem. Thus, the polymer was contaminated with a cocktail to simulate the conditions of disposal and recycling following FDA guidelines. The influence of contaminants on recycled PP was analyzed by quiescent and nonquiescent crystallization. It was found that the contaminants alter the crystallization flow since longer induction times were observed for all contaminated samples. Also, the thermal behavior was performed considering that the thermogravimetric (TGA) results indicated an increase in the stability with the presence of contaminants. Therefore, a deep investigation using the induced oxidation time and induced oxidation temperature was performed. The contaminants play an important role in the crystallization process, as well as, in the degradation of the samples. Furthermore, the use of TGA and DSC as complementary techniques is fundamental to analyze this influence.

Predicting diffusion coefficients of chemicals in and through packaging materials

Most of the physicochemical properties in polymers such as activity and partition coefficients, diffusion coefficients, and their activation with temperature are accessible to direct calculations from first principles. Such predictions are particularly relevant for food packaging as they can be used (1) to demonstrate the compliance or safety of numerous polymer materials and of their constitutive substances (e.g. additives, residues…), when they are used: as containers, coatings, sealants, gaskets, printing inks, etc. (2) or to predict the indirect contamination of food by pollutants (e.g. from recycled polymers, storage ambiance…) (3) or to assess the plasticization of materials in contact by food constituents (e.g. fat matter, aroma…). This review article summarizes the classical and last mechanistic descriptions of diffusion in polymers and discusses the reliability of semi-empirical approaches used for compliance testing both in EU and US. It is concluded that simulation of diffusion in or through polymers is not limited to worst-case assumptions but could also be applied to real cases for risk assessment, designing packaging with low leaching risk or to synthesize plastic additives with low diffusion rates.