Radiographic grading of femoral stem cementation in hip arthroplasty

Comparative analysis of the quality of the cement mantle in hip hemiarthroplasty after femoral neck fracture between three different surgical approaches: a single-center retrospective observational study

PURPOSE

Achieving the initial stability of implants is necessary for hip hemiarthroplasty (HHA), especially in elderly patients, and this can be achieved with a cement mantle of quality. The direct anterior approach (DAA) for HHA lately has shown positive results. However, evidence is lacking of HHA in elderly patients with osteoporosis after femoral neck fracture (FNF). This study compares differences in cement mantle quality after HHA, its complications, radiological outcomes and functional status in elderly patients with FNF intervened through different approaches.

METHODS

A non-interventional, retrospective case-control study was conducted. 150 cases were selected based on the surgical approach (DAA, DLA and PLA) in a 1:1:1 proportion between 2018 and 2019. Under 75 years old suspicion or confirmation of a pathological fracture were excluded. Antibiotic-loaded cement was utilized. Cement preparation involved vacuum centrifugation and standard instructions for preparation canal and filling, and prosthesis placement were followed.

RESULTS

No statistically significant differences in cement mantle quality, radiological outcomes, and the majority of the postoperative complications and functional status considering the surgical approach (p > 0.05). However, the DAA was associated significantly with shorter hospital stays (8.3 days vs 11.3 and 13 days for DLA and PLA) a decrease in postoperative blood transfusion (22% vs 34% and 53%), and lower rate of loss of walking (8% vs 20% and 28.6%).

CONCLUSION

The DAA for HHA in patients with FNF provides a high-quality cement mantle, similar to other approaches. Also, the DAA shows advantages like shorter hospital stays and lower transfusion rates in elderly patients.

Use of a Low Profile Ultra-High Molecular Weight Polyethylene Diaphyseal Humeral Cement Restrictor in Shoulder Arthroplasty

Background

When implanting a cemented humeral stem, a reliable method to prevent inappropriate extension and enable pressurization of cement in the intramedullary canal is required. The aim was to assess the outcomes of a dedicated humeral diaphyseal cement restrictor.

Methods

In total 218 shoulders (207 patients) were included in the study, all of whom underwent a cemented total shoulder arthroplasty and a retrospective review was performed. The primary outcomes of interest were device stability in the medullary canal, successful occlusion of the canal, cement extrusion and quality of cement mantle.

Results

The majority of the cohort was female (63.3%) males and the average patient age was 71.7 years (SD 8.45). In 81.7% the device was deemed to be stable in the medullary canal. The device was significantly more stable in primary (84.2%) compared to revision cases (64.3%, p = 0.02). In 69.7% Barrack grade A mantle quality was achieved, this was higher in primary cases (74.2%) compared to revision cases (39.3%) (p = 0.00006).

Discussion

We noted excellent cementation outcomes using a cement restrictor specifically designed for the diaphyseal humerus anatomy. However, this humeral specific restrictor was noted to be more stable in primary as compared to revision cases.

Quality of cementing in hemiarthroplasty for elderly neck of femur fractures does not affect short term functional outcomes

INTRODUCTION

Cemented hip hemiarthroplasty is a routine surgical option for elderly neck of femur (NOF) fractures. It is uncertain if quality of cementing has any effect on functional outcomes. The aim of this study was to determine if the quality of cementing would affect short term functional outcomes in elderly neck of femur fractures.

MATERIALS AND METHODS

Retrospective analysis of 637 single-centre cemented hip hemiarthroplasties from 2014 to 2021 was performed. Each post-operative radiograph was double-read by 2 authors (1 resident and 1 fellowship trained surgeon) to determine quality of cementing via the Barrack grading. Disagreements were reviewed by a third reader. Cement grades were grouped as Optimal (Barrack grade A-B), or Suboptimal (Barrack grade C-D). Functional outcomes were compared using mobility (community- or home-ambulant), assistance required for mobility, and Modified Barthel Index (MBI). Surgical parameters were compared between the groups.

RESULTS

There were 429 Optimal and 208 Suboptimal cases of cementing performed. There was no difference in age, American Society of Anesthesiologists score, mobility, assistance required, and MBI score pre-operatively (p > 0.05). Patients in the "Suboptimal" cementing group had a higher Charlson Comorbidity Index (CCI) score (p < 0.001). At 1 year post-operation, there was no significant difference between "Optimal" and "Suboptimal" cementing with regards to the proportion of community ambulators (30.2% vs. 25.7%, p = 0.252), walking independence (independent walkers (19.8% vs.17.3%), independent walkers with aids (41.3%vs.42.1%), walker with caregiver assistance (29.2%vs.33.7%), wheelchair-bound (9.6%vs.6.9%), p = 0.478), and distribution of MBI score (81.1%vs.82.2% achieving MBI > 60, p = 0.767). There was no significant difference in the proportion of patients with postoperative delirium (7.9% vs. 5.8, p = 0.324) or 1-year mortality rates (3.5% vs. 2.9%, p = 0.685). Except for stem design (12.2% tapered vs 20.1% collared; p = 0.011), no other surgical parameters were significantly different. The kappa value for inter-reader agreement was "substantial" at 0.727 (95% CI 0.682-0.772) (p < 0.001).

CONCLUSION

Quality of cementing in cemented hip hemiarthroplasty for elderly NOF fractures does not affect the short-term functional outcomes. In low demand patients and patients at risk of BCIS, optimal cementing may not be necessary to achieve similar short-term functional outcomes. Further studies should be conducted to determine the effect of sub-optimal cementing on long-term functional outcomes.

Clinical Outcomes and Survivorship of Hybrid Total Hip Arthroplasty Performed Through the Anterior Approach

INTRODUCTION

There is growing evidence that cemented femoral stems have lower complication rates in the elderly due to lower rates of periprosthetic fracture. The main objective of this study was to analyze the survival rate of a hybrid total hip arthroplasty (THA) construct utilizing a taper-slip femoral stem implanted through the anterior approach (AA). Secondary outcome measures were the complication rate, the rate of aseptic loosening, coronal plane alignment of the stem, and the grade of the cement mantle.

METHODS

Patients who underwent AA hybrid THA from 2013 to 2020 were included. Indications for a cemented stem were age over 70 or patients with poor bone quality. Descriptive statistics were calculated for patient characteristics. Serial radiographs were reviewed for component alignment and for evidence of implant loosening. The survival of the femoral stem was recorded, with failure defined as femoral stem revision for any reason or radiographic evidence of implant loosening.

RESULTS

A total of 473 hybrid THA in 426 patients were identified, with a mean age of 76 years. Mean follow-up was 38 months. Femoral stem survival was 99.2%. There were no cases of aseptic loosening of the femoral component. Mean coronal stem alignment was 0.2 degrees varus, and all were within 5 degrees of neutral. Cement mantle grade was either A or B in 94% of cases.

CONCLUSION

AA hybrid THA is an excellent option in elderly patients, or patients with poor bone quality, with a femoral stem survival rate of 99.2% and a 0% rate of aseptic loosening.

Is the French Paradox cementing philosophy superior to the standard cementing? A randomized controlled radiostereometric trial and comparative analysis

Aims

Highly polished stems with force-closed design have shown satisfactory clinical results despite being related to relatively high early migration. It has been suggested that the minimal thickness of cement mantles surrounding the femoral stem should be 2 mm to 4 mm to avoid aseptic loosening. The line-to-line cementing technique of the femoral stem, designed to achieve stem press-fit, challenges this opinion. We compared the migration of a highly polished stem with force-closed design by standard and line-to-line cementing to investigate whether differences in early migration of the stems occur in a clinical study.

Methods

In this single-blind, randomized controlled, clinical radiostereometric analysis (RSA) study, the migration pattern of the cemented Corail hip stem was compared between line-to-line and standard cementing in 48 arthroplasties. The primary outcome measure was femoral stem migration in terms of rotation and translation around and along with the X-, Y-, and Z- axes measured using model-based RSA at three, 12, and 24 months. A linear mixed-effects model was used for statistical analysis.

Results

Results from mixed model analyses revealed a lower mean retroversion for line-to-line (0.72° (95% confidence interval (CI) 0.38° to 1.07°; p < 0.001), but no significant differences in subsidence between the techniques (-0.15 mm (95% CI -0.53 to 0.227; p = 0.429) at 24 months. Radiolucent lines measuring < 2 mm wide were found in three and five arthroplasties cemented by the standard and line-to-line method, respectively.

Conclusion

The cemented Corail stem with a force-closed design seems to settle earlier and better with the line-to-line cementing method, although for subsidence the difference was not significant. However, the lower rate of migration into retroversion may reduce the wear and cement deformation, contributing to good long-term fixation and implant survival.

Cite this article: Bone Joint J 2022;104-B(1):19–26.

The bikini incision anterior cemented total hip arthroplasty: Assessment of radiological and clinical outcomes - A mid-term review

INTRODUCTION

There has been an increased interest in minimally invasive direct anterior approach total hip arthroplasty (THA) to provide greater patient satisfaction, improve pain relief, and reduce the duration of hospitalisation. A direct anterior approach hybrid cemented THA, utilising a bikini line incision, can be technically challenging. We aimed to undertake radiological analysis of femoral stem cementation, clinical outcomes, and component survivorship.

METHODS

Over a 5-year period, 215 primary elective bikini anterior THA conducted by a single surgeon were included. All procedures were performed using a cemented collarless polished stem. The operation was performed on a standard operating table. Patients undergoing posterior approach, revision procedures, and fractured neck of femurs were excluded. Post-operative radiographs were analysed for femoral cementation quality using the Barrack grading system. Harris hip scores (HHS) were determined at 6 weeks, 12 weeks, annually thereafter and the difference in HHS was noted.

RESULTS

In total, 215 anterior bikini THA (R = 101, L = 114) were performed in 199 patients (M = 89, F = 110) with a mean age of 77 and mean follow up of 2.9 years (range = 0.5-5). Radiographic analysis of femoral cementation showed 189 femoral stems (88%) were either Barrack A or B cementation grade, suggesting optimal cementation. Lucency in the cement-bone interface occurred mainly in Gruen Zone 1 (43%) and Zone 13(46.9%). At the most recent follow-up (mean 2.9 years), component survivorship was at 99.54% (stem). Significant improvement was noted in Harris hip scores at final follow-up (from 54 preoperatively to 92.7 at 2.9 years postoperatively).

CONCLUSION

Our results suggest that a bikini incision direct anterior approach for total hip arthroplasty can be safely employed to perform cemented femoral stems on a standard operating table.

BIOMECHANICAL RATIONALE FOR CHOICE OF CEMENT MANTLE THICKNESS AROUND A FEMORAL STEM

The change in mechanical properties of the femoral bone tissue surrounding hip endoprosthesis stems during the post-operative period is one of the causes of implant instability, and the mathematical description of this phenomenon is the subject of much research. In the present study, a model of bone adaptation, based on isotropic Stanford theory, is created for further computer investigation. The results of implementation of such a mathematical model are presented regarding the choice of cement mantle rational thickness in cemented hip arthroplasties. The results show that for cement mantle thicknesses ranging from 1–1.5[Formula: see text]mm, a peak stress value in the proximal part of the mantle exceeds the limit of durability of bone cement. Moreover, results show that high reduction in the bone density of distal and proximal regions was observed in cases of cement mantle thicknesses varying from 1–3[Formula: see text]mm. No significant changes in bone density of the abovementioned regions were obtained for 4[Formula: see text]mm and 5[Formula: see text]mm. The outcome of numerical investigations can be treated as valuable and will lead to the improvement of cemented hip replacement surgery results.