Bone-anchored titanium implants for auricular rehabilitation: case report and review of literature

Applications of CAD/CAM Technology for Craniofacial Implants Placement and Manufacturing of Auricular Prostheses-Systematic Review

This systematic review was aimed at gathering the clinical and technical applications of CAD/CAM technology for craniofacial implant placement and processing of auricular prostheses based on clinical cases. According to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) guidelines, an electronic data search was performed. Human clinical studies utilizing digital planning, designing, and printing systems for craniofacial implant placement and processing of auricular prostheses for prosthetic rehabilitation of auricular defects were included. Following a data search, a total of 36 clinical human studies were included, which were digitally planned and executed through various virtual software to rehabilitate auricular defects. Preoperative data were collected mainly through computed tomography scans (CT scans) (55 cases); meanwhile, the most common laser scanners were the 3dMDface System (3dMD LLC, Atlanta, Georgia, USA) (6 cases) and the 3 Shape scanner (3 Shape, Copenhagen, Denmark) (6 cases). The most common digital design software are Mimics Software (Mimics Innovation Suite, Materialize, Leuven, Belgium) (18 cases), Freeform software (Freeform, NC, USA) (13 cases), and 3 Shape software (3 Shape, Copenhagen, Denmark) (12 cases). Surgical templates were designed and utilized in 35 cases to place 88 craniofacial implants in auricular defect areas. The most common craniofacial implants were Vistafix craniofacial implants (Entific Medical Systems, Goteborg, Sweden) in 22 cases. A surgical navigation system was used to place 20 craniofacial implants in the mastoid bone. Digital applications of CAD/CAM technology include, but are not limited to, study models, mirrored replicas of intact ears, molds, retentive attachments, customized implants, substructures, and silicone prostheses. The included studies demonstrated a predictable clinical outcome, reduced the patient's visits, and completed the prosthetic rehabilitation in reasonable time and at reasonable cost. However, equipment costs and trained technical staff were highlighted as possible limitations to the use of CAD/CAM systems.

[Options for reconstruction after injuries in the head and neck region]

Reconstruction of lesions in the head and neck region must be both functionally and esthetically adequate, as the exposed anatomic position can easily lead to social stigmatization after injury. Distortion of symmetry, e.g., by a crooked nose, enophthalmos, or a (partial) amputation of the outer ear, is easily visible. On the other hand, limitations to nasal breathing and olfaction or diplopia may significantly reduce quality of life, and restoration of form and function continues to be challenging. This review discusses the treatment options for trauma of the external nose and the lateral midface, including the orbital floor and the auricle.

Using Osseointegrated Implants Concomitant With Onlay Bone Grafting for Auricular Reconstruction

Conventional dental implants have been reported for nasal and orbital regions but due to limited thickness of calvarium they are not used in mastoid region. Onlay bone grafting in skull concomitant with implants is a predictable method and experimental animal studies confirm it. Parietal bone and lateral mandibular ramus are suggested source of bone grafts and dental implants with 7 mm length can be used safely. Increased fixture length may lead to increase survival in long term.

Bone tissue engineering using polyetherketoneketone scaffolds combined with autologous mesenchymal stem cells in a sheep calvarial defect model

Polyetherketoneketone (PEKK) a high performance thermoplastic polymer that is FDA-approved for cranio- and maxillo-facial as well as spineal surgery. We studied the viability, growth and osteogenic differentiation of bone marrow-derived human and sheep mesenchymal stem cells (MSC) in combination with a 3D scaffold made of PEKK using different cell-based assays. To investigate if autologous MSC, either undifferentiated or osteogenically pre-differentiated, augmented bone formation after implantation, we implanted cell-seeded 3D PEKK scaffolds into calvarial defects in sheep for 12 weeks. The volume and quality of newly formed bone were investigated using micro-computer tomography (micro-CT) and histological stainings. Our results show that the 3D PEKK scaffolds were cyto- and bio-compatible. They allowed for adherence, growth and osteogenic differentiation of human and ovine MSC. However, bone healing seemed unaffected by whether the scaffolds were seeded with MSC. Considerable amounts of newly formed bone were found in all PEKK treated groups, but a fibrous capsule was formed around the implants regardless of cell seeding with MSC.

In vitro antimicrobial effects of grape seed extract on peri-implantitis microflora in craniofacial implants

OBJECTIVE

To determine the antimicrobial effects of grape seed on peri-implantitis microflora.

METHODS

The grape seed extract was tested against peri-implantitis microflora most commonly found in craniofacial implants including reference strains of Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), Candida albicans (C. albicans) and clinical strains of S. aureus, Klebsiella pneumonia (K. pneumonia) and Candida parapsilosis (C. parapsilosis) by disk diffusion test. Minimum inhibitory concentrations (MIC) and minimum cidal concentrations (MCC) were determined using modified agar dilution millpore method. The extract was further combined with polyethylene glycol and propylene glycol, and was tested for antimicrobial effects.

RESULTS

Grape seed extract showed positive inhibitory effects with S. aureus at MIC of 0.625 mg/mL and MCC of 1.25 mg/mL respectively. However the extracts showed minimal or no reactivity against strains of E. coli, K. pneumonia, C. parapsilosis and C. albicans. The use of grape seed extract in combination with polyethylene glycol and propylene glycol also showed dose dependent inhibitory effect on S. aureus.

CONCLUSIONS

The results of the study showed that grape seed has potential antimicrobial effects which can be further studied and developed to be used in the treatment of infected skin-abutment interface of craniofacial implants.

Hair band retained prosthetic reconstruction of bilaterally missing ears: a case of congenital atresia of external auditory canals and pinna

INTRODUCTION

Auricular defects present reconstructive challenges, especially if they are bilateral. Surgical reconstruction provides effective results for defects; however for some patients surgical intervention is contraindicated. This case report describes an easy clinical technique to rehabilitate a patient with auricular defects. The prime purpose of this treatment rendered was to restore the lost auricular structure to the patient's satisfaction in an elegant, comfortable and cost effective manner.

PATIENT

A thirteen year old female patient, who had bilaterally missing ears, was referred with a chief complaint of discomfort caused due to her existing hair band prosthesis and unsatisfactory esthetics. There was constant formation of ulcers at the site where the prosthesis came in contact with the skin. Considering the patient's age, ease of use and economic status, hair band retained ear prosthesis was selected. Silicone ear prostheses were fabricated on acrylic substructure to ensure fit, esthetics. Beneath the acrylic plates, a thin layer of soft silicone material was attached. The ear prostheses of both sides were connected with a metal hair band to retain.

DISCUSSION

The newly fabricated prosthesis overcame the limitations of the existing one. The patient and her parents were satisfied with the results.

CONCLUSION

The hair band retained silicone ear prosthesis is esthetic, economical and easy to use as a facial prosthesis. The addition of soft liner provided a cushion-like effect, thus reducing the formation of any ulcers due to pressure.

Rehabilitation of an Auricular Defect using Spectacle Retained Silicone Ear Prosthesis and Ear Stent

Auricular defects resulting from skin cancer, trauma or congenital cause present reconstructive challenges. Surgical reconstruction may provide effective results for smaller and larger defects. However, some patients do not prefer surgical intervention for rehabilitation due to fear of pain. The use of silicone material for fabrication of facial prosthesis has made it possible to acceptably restore what has been lost. The application of skill and resources in the correct direction can provide the needy patients good treatment options that are cost-effective and esthetically acceptable. This article describes a simple clinical technique to rehabilitate patients with auricular defects. The purpose of this treatment was to minimize the extent of surgical intervention and to restore the lost facial structure to patient's satisfaction in a manner that was both cosmetically elegant and cost-effective.

How to cite this article

Mohamed K, Vaidyanathan A, Mani U, Bhatia Y, Veeravalli PT. Rehabilitation of an Auricular Defect using Spectacle Retained Silicone Ear Prosthesis and Ear Stent. Int J Prosthodont Restor Dent 2012;2(1):29-33.

Craniofacial implant-retained auricular prosthesis: a case report

Implants provide patients with a safe and reliable method for anchoring auricular prostheses that enable restoration of their normal appearance and offer improved quality of life. In this case report, an auricular prosthesis was fabricated for a patient who had lost his right external ear in a traffic accident. Extraoral implants and bar-and-clip retention for the proper connection of the auricular prosthesis to the implant were used.