Long-Term Results of a Cementless Knee Prosthesis with a Metal-Backed Patellar Component: Clinical and Radiological Follow-Up with Histology from Retrieved Components

Results of a Highly Porous Metal-Backed Cementless Patella Implant: A Minimum 5-Year Follow-Up

Initial design cementless metal-backed patellar implants failed due to multiple reasons including implant design, use of first-generation polyethylene, and surgical technique. This study evaluates clinical outcomes and survivorship of total knee arthroplasty (TKA) using a current generation highly porous metal-backed patellar component. One-hundred twenty-five consecutive primary cementless TKAs with a compression molded highly porous metal-backed patella were reviewed. One-hundred three TKAs (82.4%) with 5-year clinical and radiographic follow-up were available for review. These were matched with 103 consecutive TKAs using a cemented patella of the same implant design. The cementless cohort had a mean age of 65.5 years, body mass index (BMI) of 33.0, and follow-up of 64.4 months. Indications for cementless TKA were based on multiple factors including age, BMI, and bone quality. There were no revisions for loosening or mechanical failure of the cementless patella compared with two cemented patellae revised for aseptic loosening. Eight patients required revisions in the cementless cohort: three for prosthetic joint infection (PJI), two for instability, one periprosthetic femur fracture, one for patella instability, and one for extensor mechanism rupture. Five patients required revisions in the cemented cohort: two for aseptic patellar loosening, one for aseptic femoral loosening, one for PJI, and one for instability. All-cause survivorship at 5 years was 92.2 and 95.1% for the cementless metal-backed implant and cemented implant cohorts, respectively. Use of a compression molded highly porous metal-backed patella component demonstrated excellent clinical and radiographic results at 5-year follow-up. Longer follow-up is required to evaluate the ability of highly porous cementless patella implants to provide durable long-term fixation.

Cementless Metal-Backed Patellar Components in Primary Total Knee Arthroplasty: An Average 10-Year Follow-Up

BACKGROUND

Historically, 1st generation metal-backed cementless patellar implants demonstrated high failure rates due to multiple factors. The 2nd generation cementless implants were developed with purported improvements in component design and polyethylene wear characteristics. This study evaluated clinical results of a current generation cementless metal-backed patellar implant with a minimum 5-year follow-up.

METHODS

One hundred and thirty-six primary total knee arthroplasties (TKAs) with metal-backed cementless patellae were compared to 183 cemented patellae with the same implant design. The cementless group mean age was 61 years (range, 40 to 81), mean body mass index (BMI) of 34.9 (range, 22.6 to 64.5), and mean follow-up of 10 years (range, 5 to 13). The cemented group mean age was 65 years (range, 32 to 89), mean BMI of 32.5 (range, 18.2 to 56.6), and mean follow-up of 10 years (range, 5 to 12). Significant demographic differences of age (P < .001), BMI (P < .01), and sex (P < .001) were found, with cementless patients being younger, heavier, and with more men.

RESULTS

There were no statistical differences in non-revision procedures (P = .214), TKA revisions (P = .639), patellar revisions (P = .151), and patellar aseptic loosening (P = .737). The 10-year survivorship of the cementless metal-backed patella was 95.9% with all-cause failure as the endpoint. The 10-year survivorship of the cemented patellar component was 98.9%.

CONCLUSION

This study demonstrated noninferiority of a 2nd generation HA-coated cementless metal-backed patellar implant in primary TKA compared to cemented patellae with 10-year survivorship of 95.9%. Advances in implant design and polyethylene wear properties have led to improved clinical results with metal-backed patellar components in primary TKA.

Short Term Outcomes of a Hydroxyapatite Coated Metal Backed Patella

We retrospectively evaluated the records and radiographs of 101 knees with a hydroxyapatite coated metal backed patella (HAP) and 50 knees with a cemented polyethylene patella (CP) with minimum two year clinical follow up. There were no patellar revisions during the study period. Patients in both the HAP and CP groups had similar clinical outcomes at final follow-up. Forty-five percent of patients in the HAP group had 1-2mm areas of decreased trabecular bone density around the pegs, which were not observed in the CP group, and may represent stress shielding. This uncemented HAP component has satisfactory early clinical outcomes, but long-term follow up is necessary to determine the durability of this implant.

Total knee replacement with retention of both cruciate ligaments

We report on the long-term results of 163 bicruciate-retaining Hermes 2C total knee replacements in 130 patients at a mean follow-up of 22.4 years (20.3 to 23.5). Even when the anterior cruciate ligament had a partially degenerative appearance it was preserved as long as the knee had a normal anterior drawer and Lachman’s test pre-operatively. The description and surgical technique of this minimally constrained prosthesis were published in 1983 and the ten-year clinical results in 1999.

A total of 12% of the knees (20 of 163) in this study were revised because of wear of the polyethylene tibial insert. Excellent stability was achieved and the incidence of aseptic component loosening was 4.3% (seven of 163). The survival rate using revision for any reason as the endpoint was 82% (95% confidence interval 76.2 to 88.0).

Although this series included a relatively small number of replacements, it demonstrated that the anterior cruciate ligament, even when partially degenerated at the time of TKR, remained functional and provided adequate stability at a long-term follow-up.

Cite this article: Bone Joint J 2013;95-B:917–22.

Twenty-year survivorship of cementless anatomic graduated component total knee arthroplasty

There is a renewed interest in cementless total knee arthroplasty (TKA) due to improved biomaterials, desire for decreased surgical times and the potential increased longevity. Seventy-three cementless TKAs (AGC, Biomet, Warsaw, Ind) were performed from 1984 to 1986. All components were implanted without cement and without screws and obtained minimum 10 years of follow-up. No patient was lost to follow-up. Fifteen failures occurred, including 12 failed metal-backed patellae, and survivorship for aseptic loosening of any component was 76.4% at 20 years. Two tibial components failed of aseptic loosening at 1.1 and 2.2 years. Excluding patella failures, the survivorship for the cementless tibial component was 96.8% at 20 years. There were no femoral component failures. After eliminating patella failures, this cementless monoblock tibial component without screws demonstrated excellent 20-year survivorship.

Aseptic loosening, not only a question of wear: a review of different theories

Today, aseptic loosening is the most common cause of revision of major arthroplasties. Aseptic loosening accounts for more than two-thirds of hip revisions and almost one-half of knee revisions in Sweden. Several theories on the cause of aseptic loosening have been proposed. Most of these theories, however, are based on empiric observations, experimental animal models or anecdotal cases. In this review, we discuss the most common theories concerning aseptic loosening. It emerges from this review that aseptic loosening has a multifactorial etiology and cannot be explained by a single theory.