Dual flow immunochromatographic assay for rapid and simultaneous quantitative detection of ochratoxin A and zearalenone in corn, wheat, and feed samples

Aggregation-induced emission nanoparticles facilitating multicolor lateral flow immunoassay for rapid and simultaneous detection of aflatoxin B1 and zearalenone

Herein we developed a multicolor lateral flow immunoassay (LFIA) test strip for rapid and simultaneous quantitative detection of aflatoxin B1 (AFB1) and zearalenone (ZEN). Three differently colored aggregation-induced emission nanoparticles (AIENPs) were designed as LFIA signal tags, with red and green AIENPs for targeting AFB1 and ZEN at the test line, and yellow AIENPs for indicating the validity of the test strip at the control (C) line. After surface functionalization with antibodies, the developed AIENP-based multicolor LFIA allows simultaneous and accurate quantification of AFB1 and ZEN using an independent C-line assisted ratiometric signal output strategy. The detection limits of AFB1 and ZEN were 6.12 and 26 pg/mL, respectively. The potential of this method for real-world applications was well demonstrated in corn and wheat. Overall, this multicolor LFIA shows great potential for field screening of multiple mycotoxins and can be extended to rapid and simultaneous monitoring of other small molecule targets.

Pattern-recognizing-assisted detection of mildewed wheat by Dyes/Dyes-Cu-MOF paper-based colorimetric sensor array

In order to timely discriminate wheat with different mildew rates, a Dyes/Dyes-Cu-MOF paper-based colorimetric sensor array was designed. Using array points to capture volatile gases of wheat with different mildew rates, and output RGB values. The correlation between ΔR/ΔG/ΔB values and odor components was established. The ΔG values of array points 2' and 3' showed the best correlation with mildew rate, with R² of 0.9816 and 0.9642. The ΔR value of 3 and the ΔG value of 2 correlate well with the mildew rate, with R² of 0.9625 and 0.9502, respectively. Then, the ΔRGB values are subjected to pattern recognition processing, and LDA achieves 100% correct discrimination for all samples, or divides high and low mildew areas. This method provides an odor-based monitoring tool for fast, visual and nondestructive evaluation of food safety and quality through visualization of odors produced by different mildew rates.

A portable paper-based aptasensor for simultaneous visual detection of two mycotoxins in corn flour using dual-color upconversion nanoparticles and Cu-TCPP nanosheets

A portable paper-based microfluidic aptasensor is established to simultaneously and visually detect zearalenone (ZEN) and ochratoxin A (OTA). The targets at the sample zone can migrate to two detection zones through dual-channels and result in green and blue fluorescence recovery. This is due to the specific recognition by a respective aptamer that destroys fluorescence resonance energy transfer (FRET) from dual-color upconversion nanoparticles (UCNPs) to Cu-TCPP nanosheets. By capturing fluorescent images and analyzing the corresponding RGB value via a smartphone, ZEN and OTA can be analyzed with limits of detection down to 0.44 ng/mL and 0.098 ng/mL in the linear ranges of 0.5-100 ng/mL and 0.1-50 ng/mL, respectively. Satisfactory recoveries are also obtained for ZEN (94.5-103.7 %) and OTA (92.2-106.8 %) in corn flour. With the advantages of simple operation, low sample consumption, and broad adaptability, this promising platform allows for the on-site detection of multiple hazards in food.

High-Sensitive FAM Labeled Aptasensor Based on Fe3O4/Au/g-C3N4 for the Detection of Sulfamethazine in Food Matrix

In this study, we developed a fluorescent aptasensor based on Fe₃O₄/Au/g-C₃N₄ and a FAM-labeled aptamer (FAM-SMZ1S) against sulfamethazine (SMZ) for the specific and sensitive detection of SMZ in food matrix. The FAM-SMZ1S was adsorbed by the Fe₃O₄/Au/g-C₃N₄ via π–π stacking and electrostatic adsorption, serving as a basis for the ultrasensitive detection of SMZ. Molecular dynamics was used to explain the reasons why SMZ1S and SMZ were combined. This aptasensor presented sensitive recognition performance, with a limit of detection of 0.16 ng/mL and a linear range of 1–100 ng/mL. The recovery rate ranged from 91.6% to 106.8%, and the coefficient of variation (CV) ranged from 2.8% to 13.4%. In addition, we tested the aptasensor for the monitoring of SMZ in various matrix samples, and the results were well-correlated (R² ≥ 0.9153) with those obtained for HPLC detection. According to these results, the aptasensor was sensitive and accurate, representing a potentially useful tool for the detection of SMZ in food matrix.

A Novel Lateral Flow Immunochromatographic Assay for Rapid and Simultaneous Detection of Aflatoxin B1 and Zearalenone in Food and Feed Samples Based on Highly Sensitive and Specific Monoclonal Antibodies

Simultaneous aflatoxin (AFB1) and zearalenone (ZEN) contamination in agro-products have become widespread globally and have a toxic superposition effect. In the present study, we describe a highly sensitive and specific dual lateral flow immunochromatographic assay (dual test strip) for rapid and simultaneous detection of AFB1 and ZEN in food and feed samples based on respective monoclonal antibodies (mAbs). Two immunogens AFB1-BSA (an AFB1 and bovine serum albumin (BSA) conjugate) and ZEN-BSA (a ZEN and BSA conjugate) were synthesized in oximation active ester (OAE) and amino glutaraldehyde (AGA). The molecular binding ratio of AFB1:BSA was 8.64:1, and that of ZEN:BSA was 17.2:1, identified by high-resolution mass spectrometry (HRMS) and an ultraviolet spectrometer (UV). The hybridoma cell lines 2A11, 2F6, and 3G2 for AFB1 and 2B6, 4D9 for ZEN were filtered by an indirect non-competitive enzyme-linked immunosorbent assay (inELISA) and an indirect competitive enzyme-linked immunosorbent assay (icELISA), respectively. As AFB1 mAb 2A11 and ZEN mAb 2B6 had the lowest 50% inhibitive concentration (IC50) and cross-reactivity (CR), they were selected for subsequent experiments. By systematically optimizing the preparation condition of gold nanoparticles (AuNPs), AuNPs-labeled mAbs, and detection condition, the visual limit of detection (LOD) of the dual test strip was 1.0 μg/L for AFB1 and 5.0 μg/L for ZEN, whereas that of the test strip reader was 0.23 μg/L for AFB1 and 1.53 μg/L for ZEN. The high reproducibility and stability of the dual test were verified using mycotoxin-spiked samples. The dual test strips were highly specific and sensitive for AFB1 and ZEN, which were validated using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Thus, the proposed AFB1 and ZEN dual test strip is suitable for rapid and simultaneous detection of AFB1 and ZEN contamination in food and feed samples.

Quantum dot-based fluorescence immunosorbent assay for the rapid detection of bacitracin zinc in feed samples

Bacitracin zinc (BAC), a polypeptide antibiotic, is utilized as a feed additive due to its ability to promote growth in animals. However, the abuse of BAC can lead to a great threat to food safety. Therefore, there is an urgent need to develop a rapid and sensitive detection method. In this study, a monoclonal antibody (mAb) against BAC with excellent sensitivity and specificity was obtained. For the first time, quantum dots (QDs) were conjugated with the prepared mAb against BAC and rabbit anti-mouse antibody to fabricate a direct and an indirect competitive fluorescence-linked immunosorbent assay (dc-FLISA and ic-FLISA) to detect BAC. The IC₅₀ of dc-FLISA and ic-FLISA were 0.28 ng/ml and 0.17 ng/ml, respectively. The limits of detection were 0.0016 ng/ml and 0.001 ng/ml, respectively, and the detection ranges were 0.0016-46.50 ng/ml and 0.001-35.65 ng/ml, respectively. In addition, the recovery rate of the two methods ranged from 93.5% to 112.0%, and the coefficient of variation (CV) was less than 10%. Therefore, the methods developed in this work have the merits of low cost, simple operation, and high sensitivity, which provide an effective analytical tool for BAC residue detection in feed samples.

Semi-quantitative detection of inflammatory biomarkers using a laser-patterned multiplexed lateral flow device

Inflammatory markers including C-reactive protein (CRP) and procalcitonin (PCT) have been shown to be useful biomarkers to improve triage speed and prevent the inappropriate use of antibiotics for infections such as pneumonia. Here, we present a novel and exciting solution to guide the administration of antibiotic treatment via rapid, semi-quantitative and multiplexed detection of CRP and PCT using an advanced lateral flow device (LFD) designed to have multiple parallel flow-paths, produced via the precise laser-based partitioning of the single flow-path of a standard LFD. Each flow-path within this multiplexed LFD has a unique detection capability which permits tailored detection of CRP within a predefined cut-off range (20 μg/mL - 100 μg/mL) and PCT above a pre-defined threshold (0.5 ng/mL). We demonstrate the use of this LFD in the successful detection of CRP and PCT semi-quantitatively within spiked human serum samples. This multiplexed near-patient assay has potential for development into a rapid triage and treatment of patients with suspected pneumonia.

Synthesis of Zearalenone Immunogen and Comparative Analysis of Antibody Characteristics

Background

This study aimed to explore the zearalenone (ZEN) immunogen synthesis method, immunogenicity, and antibody characteristics and to lay a foundation for the establishment of immunoassay methods for ZEN single residue and ZEN and its analogs total residue.

Methods

Based on the molecular structure and active sites of ZEN, oxime active ester (OAE), condensation mixed anhydride (CMA), formaldehyde (FA), and 1,4-butanediol diglycidyl ether method (BDE) were designed and used for immunogen (ZEN-BSA) synthesis. The immunogens were identified by infrared (IR) and ultraviolet (UV) spectra and gel electrophoresis (SDS-PAGE) and were then used to immunize Balb/c mice to prepare ZEN polyclonal antibody (ZEN pAb). The titers and sensitivity of the ZEN pAb were determined by indirect noncompetitive ELISA (inELISA) and indirect competitive ELISA (icELISA), respectively, and its specificity was assessed by the cross-reaction test (CR).

Results

ZEN-BSA was successfully synthesized, and the molecular binding ratios of ZEN to BSA were 17.2 : 1 (OAE), 14.6 : 1 (CMA), 9.7 : 1 (FA), and 8.3 : 1 (BDE), respectively. The highest inELISA titers of ZEN pAb of each group were 1 : (6.4 × 10³) (OAE), 1 : (3.2 × 10³) (CMA), 1 : (1.6 × 10³) (FA), and 1 : (1.6 × 10³) (BDE), respectively. The 50% inhibition concentrations (IC50) for ZEN by icELISA of each group were 11.67 μg/L (OAE), 16.29 μg/L (CMA), 20.92 μg/L (FA) and 24.36 μg/L (BDE), respectively. ZEN pAb from the mice immunized with ZEN-BSA (OAE) and ZEN-BSA (CMA) had class broad specificity to ZEN and its analogs. The CRs of ZEN pAb with α-ZAL, β-ZAL, α-ZOL, β-ZOL, and ZON were 36.53%, 16.98%, 64.33%, 20.16%, and 10.66%, respectively. ZEN pAb from the mice immunized with ZEN-BSA (FA) and ZEN-BSA (BDE) had high specificity for ZEN. The CRs of ZEN pAb with its analogs were all less than 1.0%.

Conclusion

This study demonstrated that the preparation of the class broad-specificity antibodies of ZEN and its analogs can be achieved by immunizing animals with the immunogen ZEN-BSA prepared by the OAE method, while the preparation of highly specific antibodies can be achieved by immunizing animals with the immunogen ZEN-BSA prepared by the FA method. These findings lay the material and technical foundation for immunoassay of ZEN single residue and ZEN and its analogs total residue.

SERS based sensor for mycotoxins detection: Challenges and improvements

Surface-enhanced Raman spectroscopy (SERS) has become a growing ultrasensitive analytical technique to quantify toxic molecules in foodstuffs. Monitoring the levels of chemical contaminants not only ensures food security but also offers a guideline on the production, processing, and risk analysis of consumer's health protection. The objective of this study was to point out the possible challenges associated with the detection of mycotoxins in foodstuffs. Herein, we have discussed briefly as to selectivity, accuracy, precision, robustness, ruggedness, non-specific adsorption (NSA), cross-reactivity (for both label-free and the target analyte capture approaches like the application of antibody, aptamer, molecularly imprinted polymer (MIP), linear polymer affinity agents and/or specific surface-modified nanomaterials) and their potential solution.

Multifunctional Fe3O4@Au supraparticle as a promising thermal contrast for an ultrasensitive lateral flow immunoassay

An ultrasensitive lateral flow immunoassay (LFIA) strip has been developed based on a multifunctional photothermal contrast Fe₃O₄@Au supraparticle (Fe₃O₄@Au SP) for quantitative Ochratoxin A (OTA) detection. The Fe₃O₄@Au SP composite not only shows a better photothermal effect over Fe₃O₄ and gold nanoparticles, but possesses magnetic property and excellent ability to directly adsorb protein (antibody). Under 808 nm irradiation, photothermal images of the test strips are recorded by a portable Infrared thermal camera. A quantitative analysis is easily achieved based on the thermal changes, which are proportional to the concentrations of analytes. Under an optimal condition, a wide linear detection range from 1 pg mL⁻¹ to 1μgmL⁻¹ and a limit of detection (LOD) at 0.12 pg mL⁻¹ have been achieved with OTA as a model analytes. The practical application potential has also been validated by detection of OTA in spiked corn, peanut, and soybean extractives with overall recoveries ranging from 98.6% to 115% and coefficient of variations (CVs) between 6.06% and 12.73%. The photothermal LFIA renders a rapid, sensitive, and quantitative bio-/chemo-sensing platform with only a portable laser source and a thermal camera.

Biosynthetic Mycotoxin Conjugate Mimetics-Mediated Green Strategy for Multiplex Mycotoxin Immunochromatographic Assay

Various mycotoxins widely co-exist in agro-products, and their combined effects cause toxicity and potential carcinogenicity to humans and animals. In this work, we developed an economical and sensitive quantum dots (QDs)/QD microbead (QDs/QB)-based multiplex immunochromatographic assay (mICA) for the rapid detection of fumonisin B₁ (FB₁), zearalenone (ZEN), and ochratoxin A (OTA) without the building-up process of mycotoxin conjugates. QDs and QBs were selected as fluorescent reporters and conjugated with antimycotoxin monoclonal antibodies for improving sensitivity. Furthermore, phage-displayed FB₁, ZEN, and OTA mimotope peptide-based soluble and monovalent fusions to maltose-binding protein (MBP) were applied onto the test line of the mICA as the mimetic coating antigen. Under the optimized conditions, the visual detection limits (vLODs) of peptide-MBP-based mICA could be obtained as 0.25 ng/mL for FB₁, 3.0 ng/mL for ZEN, and 0.5 ng/mL for OTA within 10 min. The results for spiked real sample detection indicate good accuracy, reproducibility, and practicability. In addition, the proposed mICA was comparable with ultraperformance liquid chromatography coupled to tandem mass spectrometry (UPLC-MS/MS) in terms of reliability in detecting FB₁, ZEN, and OTA using natural samples. From the point of promoting commercial production, these time-saving and low-cost peptide-MBP antigens applied in ICA might provide promising potential for promoting productivity and decreasing the cost of production.

A self-assembled electrochemical immunosensor for ultra-sensitive detection of ochratoxin A in medicinal and edible malt

Trace residue of mycotoxins in complex medicinal and edible food matrices has brought huge challenges for the development of ultrasensitive analytical methods. Here, a green electrochemical immunosensor for the ultrasensitive detection of ochratoxin A (OTA) was fabricated by self-assembling a compact 2-mercaptoacetic (TGA) monolayer on the surface of the working Au electrode to form the Au/TGA/bovine serum aibumin (BSA)-OTA/anti-OTA monoclonal antibody composite probes for selective and ultra-sensitive detection of OTA based on indirect competitive principle and differential pulse voltammetry analysis. The electrochemical impedance spectroscopy and cyclic voltammetry methods were introduced to characterize the assemble situation of the TGA-modified Au electrode and optimize some critical parameters for the green electrochemical immunoseonsor. Under the optimal conditions, the developed immunosensor exhibited much lower limit of detection (0.08 ng/mL) in the range of 0.1-1.0 ng/mL for OTA compared with other direct or disposable electrochemical immunosensors. Real application in the spiked malt samples verified high accuracy with no matrix interferences of the proposed immunoseonsor. This is a meaningful study on a self-assembled electrochemical immunoseonsor for ultra-sensitive and rapid detection of OTA in malt samples, which suggested a general simple-to-use sensing platform and prospect as an economical and green tool for ultra-sensitive detection of much more trace-level of toxic small molecules in other complex matrices to ensure their quality and safety.