Dye-Affinity Nanofibrous Membrane for Adsorption of Lysozyme: Preparation and Performance Evaluation

Increasing the efficiency of gene editing with CRISPR-Cas9 via concurrent expression of the Beta protein

Escherichia coli has emerged as an important host for the production of biopharmaceuticals or other industrially relevant molecules. An efficient gene editing tool is indispensable for ensuring high production levels and optimal release of target products. However, in Escherichia coli, the CRISPR-Cas9 system has been shown to achieve gene modifications with relatively low frequency. Large-scale PCR screening is required, hindering the identification of positive clones. The beta protein, which weakly binds to single-stranded DNA but tightly associates with complementary strand annealing products, offers a promising solution to this issue. In the present study, we describe a targeted and continuous gene editing strategy for the Escherichia coli genome. This strategy involves the coexpression of the beta protein alongside the CRISPR-Cas9 system, enabling a variety of genome modifications such as gene deletion and insertion with an efficiency exceeding 80 %. The integrity of beta proteins is essential for the CRISPR-Cas9/Beta-based gene editing system. In this work, the deletion of either the N- or C-terminal domain significantly impaired system efficiency. Overall, our findings established the CRISPR-Cas9/Beta system as a suitable gene editing tool for various applications in Escherichia coli.

Evaluating Post-Treatment Effects on Electrospun Nanofiber as a Support for Polyamide Thin-Film Formation

Poly(acrylonitrile-co-methyl acrylate) (PAN-co-MA) electrospun nanofiber (ENF) was used as the support for the formation of polyamide (PA) thin films. The ENF support layer was post-treated with heat-pressed treatment followed by NaOH hydrolysis to modify its support characteristics. The influence of heat-pressed conditions and NaOH hydrolysis on the support morphology and porosity, thin-film formation, surface chemistry, and membrane performances were investigated. This study revealed that applying heat-pressing followed by hydrolysis significantly enhances the physicochemical properties of the support material and aids in forming a uniform polyamide (PA) thin selective layer. Heat-pressing effectively densifies the support surface and reduces pore size, which is crucial for the even formation of the PA-selective layer. Additionally, the hydrolysis of the support increases its hydrophilicity and decreases pore size, leading to higher sodium chloride (NaCl) rejection rates and improved water permeance. When compared with membranes that underwent only heat-pressing, those treated with both heat-pressing and hydrolysis exhibited superior separation performance, with NaCl rejection rates rising from 83% to 98% while maintaining water permeance. Moreover, water permeance was further increased by 29% through n-hexane-rinsing post-interfacial polymerization. Thus, this simple yet effective combination of heat-pressing and hydrolysis presents a promising approach for developing high-performance thin-film nanocomposite (TFNC) membranes.

Preparation and characterization of lysozyme loaded cryogel for heavy metal removal

In the present study, monolithic poly(N-isopropylacrylamide-acrylamide)-acrilic acid (poly(npam-aam)-aac) cryogels were made. Swelling tests, SEM, XRD, and ATR-FTIR analyses revealed distinct cryogel and lysozyme-loaded cryogel properties. The equilibrium swelling degree was 6.2 g H2O/g cryogel. The created poly(npam-aam)-aac with pores of 10-100 μm was obviously seen in SEM images. Lysozyme adsorption capacity on poly(npam-aam)-aac was found to be 260 mg/g at pH 7.4 and 40 °C. After that, we used lysozyme adsorbed cryogel for the removal of the model heavy metal ion (cadmium). A series of pH, duration, and ionic strengths were used to conduct Cd2+ adsorption experiments. The results showed that the new adsorbent had a considerable chemical affinity for Cd2+ ions in its ability to bind them under eye ocular conditions (pH 7.4, 32-36 °C, 0,15 M NaCl). The traditional Langmuir adsorption model was the most suitable, achieving maximum uptake of ∼185 mg/g. Chemical adsorption was found to be the rate-controlling step, and the process was also compatible with the pseudo-second-order model. For the treatment of ocular pathologies, the most effective enzyme, lysozyme, must show its function. That is why there is a need for using lysozyme, and lysozyme is selected as a lignad to adsorb heavy metal ions because of its high heavy metal binding affinity. This material could be used for the treatment of ocular pathologies in the future.

Reactive Green 19 dye-ligand immobilized on the aminated nanofiber membranes for efficient adsorption of lysozyme: Process development and optimization in batch and flow systems

The performance of lysozyme adsorption by the aminated nanofiber membrane immobilized with Reactive Green 19 (RG19) dyes was evaluated in batch and flow systems. The physicochemical properties of the dye-immobilized nanofiber membrane were characterized. The parameters of batch-mode adsorption of lysozyme (e.g., pH, initial dye concentration, and lysozyme concentration) were optimized using the Taguchi method. In a flow process, the factors influencing the dynamic binding performance for lysozyme adsorption in the chicken egg white (CEW) solution include immobilized dye concentration, adsorption pH value, feed flow rate, and feed CEW concentration. The impact of these operating conditions on the lysozyme purification process was investigated. Under optimal conditions, the recovery yield and purification factor of lysozyme achieved from the one-step adsorption process were 98.52% and 143 folds, respectively. The dye-affinity nanofiber membrane also did not exhibit any significant loss in its binding capacity and purification performance after five consecutive uses.

Recent development and application of membrane chromatography

Membrane chromatography is mainly used for the separation and purification of proteins and biological macromolecules in the downstream processing process, also applications in sewage disposal. Membrane chromatography is recognized as an effective alternative to column chromatography because it significantly improves chromatography from affinity, hydrophobicity, and ion exchange; the development status of membrane chromatography in membrane matrix and membrane equipment is thoroughly discussed, and the applications of protein capture and intermediate purification, virus, monoclonal antibody purification, water treatment, and others are summarized. This review will provide value for the exploration and potential application of membrane chromatography.

Functional Properties and Extraction Techniques of Chicken Egg White Proteins

Chicken egg whites contain hundreds of proteins, and are widely used in the food, biological and pharmaceutical industries. It is highly significant to study the separation and purification of egg white proteins. This review first describes the structures and functional properties of several major active proteins in egg whites, including ovalbumin, ovotransferrin, ovomucoid, lysozyme, ovomucin, ovomacroglobulin and avidin. Then, the common techniques (including precipitation, chromatography and membrane separation) and some novel approaches (including electrophoresis, membrane chromatography, aqueous two-phase system and molecular imprinting technology) for the separation and purification of egg white proteins broadly reported in the current research are introduced. In addition, several co-purification methods for simultaneous separation of multiple proteins from egg whites have been developed to improve raw material utilization and reduce costs. In this paper, the reported techniques in the last decade for the separation and purification of chicken egg white proteins are reviewed, discussed and prospected, aiming to provide a reference for further research on egg proteins in the future.

Adsorption behavior of fluoroquinolone(ciprofloxacin) using zinc oxide impregnated activated carbon prepared from jack fruit peel: Kinetics and isotherm studies

Ciprofloxacin is a pharmaceutical component used for treating various tract infections. This is considered as an emerging contaminant due to the release of unreacted components getting disposed into the water bodies. This component is effectively treated using renewable biomass, which is converted into a useful renewable low-cost adsorbent material. Discarded Jack Fruit Peel (JFP) is used as an activated carbon incorporated with zinc oxide nanocomposite. The prepared activated carbon in this experiment was characterized by determining their functional groups, morphological characters, and nature of the adsorbent material by analyzing the Fourier Transform InfraRed (FTIR), Field Emission Scanning Electron Microscopy (FESEM), and X-ray Diffraction (XRD) characterization. Further, the prepared composite's correlation coefficients and equilibrium sorption of the adsorption process were calculated using Ultra Violet (UV)-Visible Spectroscopy and analyzed with isotherm models (Langmuir model, Freundlich model, and Temkin model) and kinetic models (Pseudo-first-order kinetics, Pseudo-second-order kinetics, Intraparticle diffusion model, and Elovich model). Among the different models, the Zinc oxide impregnated activated carbon show Freundlich Isotherm and Pseudo Second order equation having a maximum correlation with experimental studies indicating double-layer adsorption, which suggests that the process is chemisorption. The operational parameters, including the effect of pH, dosage of activated carbon, and contact time of adsorption was calculated to identify the optimal condition for maximum adsorption.

Removal of Ionic Dyes by Nanofiber Membrane Functionalized with Chitosan and Egg White Proteins: Membrane Preparation and Adsorption Efficiency

Electrospun polyacrylonitrile (PAN) nanofiber membrane was functionalized with chitosan and proteins for use in the treatment of dye-containing wastewater. The PAN nanofiber membrane was subjected to alkaline hydrolysis, before being grafted with chitosan and subsequently the proteins from chicken egg white. The resultant nanofiber membrane (P-COOH-CS-CEW) was comprehensively characterized using thermogravimetric analysis, Fourier-transform infrared spectroscopy, and scanning electron microscopy. The efficiency of P-COOH-CS-CEW in removing cationic dye toluidine blue O (TBO) and anionic dye acid orange 7 (AO7) in aqueous solution was evaluated. Based on the performance of model fitting, Langmuir and pseudo-second-order kinetic model could be used to describe the performance of P-COOH-CS-CEW in the removal of TBO (pH 10) and AO7 (pH 2) from the dye solutions. The adsorbed TBO and AO7 dyes can be completely desorbed by an elution solution made of 50% (v/v) ethanol and 1 M sodium chloride. After five consecutive adsorption-desorption cycles, the efficiency of dye removal by P-COOH-CS-CEW was maintained above 97%.

Kinetic and Thermodynamic Studies of Lysozyme Adsorption on Cibacron Blue F3GA Dye-Ligand Immobilized on Aminated Nanofiber Membrane

The polyacrylonitrile (PAN) nanofiber membrane was prepared by the electrospinning technique. The nitrile group on the PAN nanofiber surface was oxidized to carboxyl group by alkaline hydrolysis. The carboxylic group on the membrane surface was then converted to dye affinity membrane through reaction with ethylenediamine (EDA) and Cibacron Blue F3GA, sequentially. The adsorption characteristics of lysozyme onto the dye ligand affinity nanofiber membrane (namely P-EDA-Dye) were investigated under various conditions (e.g., adsorption pH, EDA coupling concentration, lysozyme concentration, ionic strength, and temperature). Optimum experimental parameters were determined to be pH 7.5, a coupling concentration of EDA 40 μmol/mL, and an immobilization density of dye 267.19 mg/g membrane. To understand the mechanism of adsorption and possible rate controlling steps, a pseudo first-order, a pseudo second-order, and the Elovich models were first used to describe the experimental kinetic data. Equilibrium isotherms for the adsorption of lysozyme onto P-EDA-Dye nanofiber membrane were determined experimentally in this work. Our kinetic analysis on the adsorption of lysozyme onto P-EDA-Dye nanofiber membranes revealed that the pseudo second-order rate equation was favorable. The experimental data were satisfactorily fitted by the Langmuir isotherm model, and the thermodynamic parameters including the free energy change, enthalpy change, and entropy change of adsorption were also determined accordingly. Our results indicated that the free energy change had a negative value, suggesting that the adsorption process occurred spontaneously. Moreover, after five cycles of reuse, P-EDA-Dye nanofiber membranes still showed promising efficiency of lysozyme adsorption.

Adsorption and purification performance of lysozyme from chicken egg white using ion exchange nanofiber membrane modified by ethylene diamine and bromoacetic acid

A high-performance polyacid ion exchange (IEX) nanofiber membrane was used in membrane chromatography for the recovery of lysozyme from chicken egg white (CEW). The polyacid IEX nanofiber membrane (P-BrA) was prepared by the functionalization of polyacrylonitrile (PAN) nanofiber membrane with ethylene diamine (EDA) and bromoacetic acid (BrA). The adsorption performance of P-BrA was evaluated under various operating conditions using Pall filter holder. The results showed that optimal conditions of IEX membrane chromatography for lysozyme adsorption were 10% (w/v) of CEW, pH 9 and 0.1 mL/min. The purification factor and yield of lysozyme were 402 and 91%, respectively. The adsorption process was further scaled up to a larger loading volume, and the purification performance was found to be consistent. Furthermore, the regeneration of IEX nanofiber membrane was achieved under mild conditions. The adsorption process was repeated for five times and the adsorption capacity of adsorber was found to be unaffected.

Removal of dye waste by weak cation-exchange nanofiber membrane immobilized with waste egg white proteins

In this research, a protein nanofiber membrane (P-COOH-CEW) was developed to treat the dye waste. Initially, polyacrylonitrile nanofiber membrane (PAN) was prepared by electrospinning, followed by heat treatment, alkaline treatment, and neutralization to obtain weak cation exchange nanofiber membrane (P-COOH). The P-COOH membrane was chemically coated with chicken egg white (CEW) proteins to obtain a 3D structure of complex protein nanofiber membrane (P-COOH-CEW). The composite prepared was characterized with Fourier Transform Infrared analysis (FTIR), Scanning Electron Microscopy (SEM), and thermogravimetric analysis (TGA). Further, the composite was evaluated by investigating the removal of Toluidine Blue O (TBO) from aqueous solutions in batch conditions. Different operating parameters - coupling of CEW, shaking rate, initial pH, contact time, temperature, and dye concentration were studied. From the results, maximum removal capacity and equilibrium association constant was determined to be 546.24 mg/g and 10.18 mg/mg, respectively at pH 10 and 298 K. The experimental data were well fitted to pseudo-second order model. Furthermore, desorption studies revealed that the adsorbed TBO can be completely eluted by using 50% ethanol or 50% glycerol in 1 M NaCl solution. Additionally, the reuse of P-COOH-CEW membrane reported to have 97.32% of removal efficiency after five consecutive adsorption/desorption cycles.

Synthesis and Evaluation of Dye-Ligand Affinity Adsorbents for Protein Purification

Dye-ligand affinity chromatography is a widely used technique in protein purification. The utility of the reactive dyes as affinity ligands results from their unique chemistry, which confers wide specificity toward a large number of proteins. They are commercially available, inexpensive, stable and can easily be immobilized. Significant factors that contribute to the successful operation of a dye-ligand chromatography include matrix type, dye-ligand density, adsorption along with elution conditions and flow rate. The present chapter provides protocols for the synthesis of dye-ligand affinity adsorbents as well as protocols for screening, selection, and optimization of a given dye-ligand purification step. The purification of the glutathione transferases from Phaseolus vulgaris on Cibacron Blue 3GA-Sepharose affinity adsorbent is given as an example.

Egg white lysozyme purification by a stirred cell contactor equipped with a weak ion-exchange nanofiber membrane: Process development and scale-up

A weak ion-exchange membrane (P-COOH) was synthesized by alkaline hydrolysis of a polyacrylonitrile nanofiber membrane prepared by electrospinning process. The P-COOH membrane was characterized for its physical properties and its application for purification of lysozyme from chicken egg white was investigated. The lysozyme adsorption efficiency of the P-COOH membrane operating in a stirred cell contactor (Millipore, Model 8010) was evaluated. The effects of key parameters such as the feed concentration, the rotating speed, the flow rate of feed and the operating pressure were studied. The results showed successful purification of lysozyme with a high recovery yield of 98% and a purification factor of 63 in a single step. The purification strategy was scaled-up to the higher feedstock loading volume of 32.7 and 70 mL using stirred cell contactors of Model 8050 and 8200, respectively. The scale-up processes achieved similar purification results, proving linear scalability of the purification technique adopted.

Development of Novel EE/Alginate Polyelectrolyte Complex Nanoparticles for Lysozyme Delivery: Physicochemical Properties and In Vitro Safety

The number of biologic drugs has increased in the pharmaceutical industry due to their high therapeutic efficacy and selectivity. As such, safe and biocompatible delivery systems to improve their stability and efficacy are needed. Here, we developed novel cationic polymethacrylate-alginate (EE-alginate) pNPs for the biologic drug model lysozyme (Lys). The impact of variables such as total charge and charge ratios over nanoparticle physicochemical properties as well as their influence over in vitro safety (viability/proliferation and cell morphology) on HeLa cells was investigated. Our results showed that electrostatic interactions between the EE-alginate and lysozyme led to the formation of EE/alginate Lys pNPs with reproducible size, high stability due to their controllable zeta potential, a high association efficiency, and an in vitro sustained Lys release. Selected formulations remained stable for up to one month and Fourier transform-Infrared (FT-IR) showed that the functional groups of different polymers remain identifiable in combined systems, suggesting that Lys secondary structure is retained after pNP synthesis. EE-alginate Lys pNPs at low concentrations are biocompatible, while at high concentrations, they show cytotoxic for HeLa cells, and this effect was found to be dose-dependent. This study highlights the potential of the EE-alginate, a novel polyelectrolyte complex nanoparticle, as an effective and viable nanocarrier for future drug delivery applications.

Antibacterial activity of quaternized chitosan modified nanofiber membrane

The electrospinning PAN nanofiber membrane (P-CN) was hydrolysed to convert carboxylic groups as reaction sites and covalently graft chitosan molecule. The chitosan derivatives with quaternary ammonium groups exerted greater efficiency against bacteria as compared to pure chitosan. Hence, the chitosan modified membrane (P-CS), can be functionalized with quaternary amine (i.e., glycidyl trimethyl ammonium chloride, GTMAC) to form quaternized chitosan nanofiber membrane (designated as P-HTCC) under various conditions (acidic, neutral, and alkaline). N-quaternized derivatives of chitosan modified membrane (N-HTCC) showed 72% and 60% degree of quaternization (DQ) under acidic and neutral conditions, respectively. Under alkaline condition, additional quaternization of N, O-HTCC via its amino and hydroxyl groups, has improved up to 90% DQ of the chitosan. The antibacterial activity of the quaternized chitosan modified membrane prepared from acetic acid medium is stronger than that prepared from water and alkaline media. Also, antibacterial activity of quaternized chitosan is stronger than chitosan modified membrane against E. coli. The microbiological assessments showed that the water-stable P-HTCC nanofiber membrane under modification in acidic medium exerted antibacterial activity up to 99.95% against E. coli. Therefore, the P-HTCC membrane exhibited high potential to be integrated into microfiltration membrane to effectively disinfect E. coli.