3D Bioprinting: The Roller Coaster Ride to Commercialization

3D Bioprinting of Hyaline Articular Cartilage: Biopolymers, Hydrogels, and Bioinks

The musculoskeletal system, consisting of bones and cartilage of various types, muscles, ligaments, and tendons, is the basis of the human body. However, many pathological conditions caused by aging, lifestyle, disease, or trauma can damage its elements and lead to severe disfunction and significant worsening in the quality of life. Due to its structure and function, articular (hyaline) cartilage is the most susceptible to damage. Articular cartilage is a non-vascular tissue with constrained self-regeneration capabilities. Additionally, treatment methods, which have proven efficacy in stopping its degradation and promoting regeneration, still do not exist. Conservative treatment and physical therapy only relieve the symptoms associated with cartilage destruction, and traditional surgical interventions to repair defects or endoprosthetics are not without serious drawbacks. Thus, articular cartilage damage remains an urgent and actual problem requiring the development of new treatment approaches. The emergence of biofabrication technologies, including three-dimensional (3D) bioprinting, at the end of the 20th century, allowed reconstructive interventions to get a second wind. Three-dimensional bioprinting creates volume constraints that mimic the structure and function of natural tissue due to the combinations of biomaterials, living cells, and signal molecules to create. In our case-hyaline cartilage. Several approaches to articular cartilage biofabrication have been developed to date, including the promising technology of 3D bioprinting. This review represents the main achievements of such research direction and describes the technological processes and the necessary biomaterials, cell cultures, and signal molecules. Special attention is given to the basic materials for 3D bioprinting-hydrogels and bioinks, as well as the biopolymers underlying the indicated products.

High resolution lithography 3D bioprinting

Lithography bioprinting can fabricate constructs with high resolution for potential use in tissue engineering applications. Seminal work by Grigoryan and colleagues developed bioresins with precise control over the x, y, and z-planes during lithography bioprinting and applied this technique to fabricating physiologically biomimetic alveolar lung models.

Three-Dimensional Printing of an Apigenin-Loaded Mucoadhesive Film for Tailored Therapy to Oral Leukoplakia and the Chemopreventive Effect on a Rat Model of Oral Carcinogenesis

Oral leukoplakia, which presents as white lesions in the oral cavity, including on the tongue, is precancerous in nature. Conservative treatment is preferable, since surgical removal can markedly reduce the patient’s quality of life. In the present study, we focused on the flavonoid apigenin as a potential compound for preventing carcinogenesis, and an apigenin-loaded mucoadhesive oral film was prepared using a three-dimensional (3D) bioprinter (semi-solid extrusion-type 3D printer). Apigenin-loaded printer inks are composed of pharmaceutical excipients (HPMC, CARBOPOL, and Poloxamer), water, and ethanol to dissolve apigenin, and the appropriate viscosity of printer ink after adjusting the ratios allowed for the successful 3D printing of the film. After drying the 3D-printed object, the resulting film was characterized. The chemopreventive effect of the apigenin-loaded film was evaluated using an experimental rat model that had been exposed to 4-nitroquinoline 1-oxide (4NQO) to induce oral carcinogenesis. Treatment with the apigenin-loaded film showed a remarkable chemopreventive effect based on an analysis of the specimen by immunohistostaining. These results suggest that the apigenin-loaded mucoadhesive film may help prevent carcinogenesis. This successful preparation of apigenin-loaded films by a 3D printer provides useful information for automatically fabricating other tailored films (with individual doses and shapes) for patients with oral leukoplakia in a future clinical setting.

Development of in situ bioprinting: A mini review

Bioprinting has rapidly progressed over the past decade. One branch of bioprinting known as in situ bioprinting has benefitted considerably from innovations in biofabrication. Unlike ex situ bioprinting, in situ bioprinting allows for biomaterials to be printed directly into or onto the target tissue/organ, eliminating the need to transfer pre-made three-dimensional constructs. In this mini-review, recent progress on in situ bioprinting, including bioink composition, in situ crosslinking strategies, and bioprinter functionality are examined. Future directions of in situ bioprinting are also discussed including the use of minimally invasive bioprinters to print tissues within the body.

Multiparametric Material Functionality of Microtissue-Based In Vitro Models as Alternatives to Animal Testing

With the definition of the 3R principle by Russel and Burch in 1959, the search for an adequate substitute for animal testing has become one of the most important tasks and challenges of this time, not only from an ethical, but also from a scientific, economic, and legal point of view. Microtissue-based in vitro model systems offer a valuable approach to address this issue by accounting for the complexity of natural tissues in a simplified manner. To increase the functionality of these model systems and thus make their use as a substitute for animal testing more likely in the future, the fundamentals need to be continuously improved. Corresponding requirements exist in the development of multifunctional, hydrogel-based materials, whose properties are considered in this review under the aspects of processability, adaptivity, biocompatibility, and stability/degradability.

Microfluidic Cell Transport with Piezoelectric Micro Diaphragm Pumps

The automated transport of cells can enable far-reaching cell culture research. However, to date, such automated transport has been achieved with large pump systems that often come with long fluidic connections and a large power consumption. Improvement is possible with space- and energy-efficient piezoelectric micro diaphragm pumps, though a precondition for a successful use is to enable transport with little to no mechanical stress on the cell suspension. This study evaluates the impact of the microfluidic transport of cells with the piezoelectric micro diaphragm pump developed by our group. It includes the investigation of different actuation signals. Therewith, we aim to achieve optimal fluidic performance while maximizing the cell viability. The investigation of fluidic properties proves a similar performance with a hybrid actuation signal that is a rectangular waveform with sinusoidal flanks, compared to the fluidically optimal rectangular actuation. The comparison of the cell transport with three actuation signals, sinusoidal, rectangular, and hybrid actuation shows that the hybrid actuation causes less damage than the rectangular actuation. With a 5% reduction of the cell viability it causes similar strain to the transport with sinusoidal actuation. Piezoelectric micro diaphragm pumps with the fluidically efficient hybrid signal actuation are therefore an interesting option for integrable microfluidic workflows.