Synthesis, characterization of new homo and heteronuclear Schiff base copper(II) complexes

Separation of Boron from Geothermal Waters with Membrane System

This study presents the separation and recovery of boron from geothermal waters with a polymeric membrane system and suggests a transport mechanism. The optimum relative parameters of the transport were examined. The recovery value of boron was 60.46% by using polymeric membrane system from prepared aquatic solution to the acceptor phase. The membrane's capacity and selectivity of the transport process were examined. Kinetics values were calculated for each transport parameter. The optimum kinetic values were 1.4785 × 10^-6 (s^-1), 7.3273 × 10^-8 (m/s), 13.5691 × 10^-8 (mol/m².s), 5.8174 × 10^-12 (m²/s) for constant rate, permeability coefficient, flux, and diffusion coefficient, respectively. Boron was transported selectively and successfully from geothermal waters in the presence of other metal cations with 59.85% recovery value. This study indicates the application of real samples in polymeric membrane systems, which are very practical, economic, and easy to use for large-scale applications. The chemical and physical properties of polymer inclusion membranes (PIMs) offer the opportunity to be specially designed for specific applications.

New Type Biomembrane: Transport and Biodegradation of Reactive Textile Dye

In traditional separation processes, there are environmental risks still because of the presence of toxic agents. Thus, a novel biomembrane microreactor named eco-green biomembrane (EgBM) was developed to perform the transport, biodegradation, and cleaning of a textile dye aqueous solution (3 mg/L) from the donor (i.e., textile dye) to the acceptor (i.e., laccase enzymes) phases. In the present work, Morchella esculenta pellets were used as carriers and degraders instead of using the traditional chemical carriers. The optimized EgBM was made of cellulose triacetate (16.1%) as a base polymer, 2-nitrophenyl octyl ether (25.2%) as a plasticizer, and M. esculenta fungus pellets (58.7%) as both carriers and degraders. A decoloration percentage of 98.6% ± 0.8 in 60 h was attained, which was due to two mechanisms: biosorption (15.4% ± 0.1) on fungal mycelium and biodegradation (83.2% ± 0.6) by laccase enzymes. The EgBM was achieved not only by the transport of reactive textile dyes used in the donor phase but also by the biodegradation and biosorption of the dyes.