A methodological study for the analysis of apatite-coated dental implants retrieved from humans

Histomorphometric Evaluation of Socket Preservation Using Autogenous Tooth Biomaterial and BM-MSC in Dogs

This study is aimed at assessing the dimensional alterations occurring in the alveolar bone after premolar extraction in dogs with histomorphometric and histological analysis. After atraumatic premolar extraction, tooth-derived bone graft material was grafted in the extraction socket of the premolar region in the lower jaws of six dogs in two experimental groups. In the second experimental group, BM-MSCs were added together with the graft. The control was left untreated on the opposite side. After twelve weeks, all six animals were sacrificed. Differences in alveolar bone height crests lingually and buccally, and alveolar bone width at 1, 3, and 5 mm infracrestally, were examined. Histologic study revealed osteoconductive properties of tooth biomaterial. A statistically significant difference was detected between the test and control groups. In the test groups, a reduced loss of vertical and horizontal alveolar bone dimensions compared with the control group was observed. Tooth bone graft material may be considered useful for alveolar ridge preservation after tooth extraction, as it could limit the natural bone resorption process.

Bioactive Glass Applications in Dentistry

At present, researchers in the field of biomaterials are focusing on the oral hard and soft tissue engineering with bioactive ingredients by activating body immune cells or different proteins of the body. By doing this natural ground substance, tissue component and long-lasting tissues grow. One of the current biomaterials is known as bioactive glass (BAG). The bioactive properties make BAG applicable to several clinical applications involving the regeneration of hard tissues in medicine and dentistry. In dentistry, its uses include dental restorative materials, mineralizing agents, as a coating material for dental implants, pulp capping, root canal treatment, and air-abrasion, and in medicine it has its applications from orthopedics to soft-tissue restoration. This review aims to provide an overview of promising and current uses of bioactive glasses in dentistry.

Clinical Outcome of Hydroxyapatite Coated, Bioactive Glass Coated, and Machined Ti6Al4V Threaded Dental Implant in Human Jaws: A Short-Term Comparative Study

INTRODUCTION

Growing aspect of endosseous implant research is focused on surface modification of dental implants for the purpose of improving osseointegration. The aim of this study was to evaluate and compare the clinical outcome (ie, osseointegration) of hydroxyapatite coated, bioactive glass coated and machined titanium alloy threaded dental implants in human jaw bone after implantation.

MATERIALS AND METHODS

One hundred twenty-six implants (45 hydroxyapatite coated, 41 bioactive glass coated, and 40 machined titanium implants) have been placed in incisor areas of 62 adult patients. Outcome was assessed up to 12 months after prosthetic rehabilitation using different clinical and radiological parameters. Surface roughness of failed implants was analyzed by laser profilometer.

DISCUSSION

Hydroxyapatite and bioactive glass coating materials were nontoxic and biocompatible. Least marginal bone loss in radiograph, significantly higher (P < 0.05) interface radiodensity, and less interfacial gaps were observed in computed tomography with bioactive glass coated implants at anterior maxilla compared to other 2 types.

CONCLUSION

Bioactive glass coated implants are equally safe and effective as hydroxyapatite coated and machined titanium implants in achieving osseointegration; therefore, can be effectively used as an alternative coating material for dental implants.

Bioactive-glass in periodontal surgery and implant dentistry

Bioactive-glass (B-G) is a material known for its favorable biological response when in contact with surrounding fibro-osseous tissues, due not only to an osteoconductive property, but also to an osteostimulatory capacity, and superior biocompatibility for use in human body. The objectives of this paper are to review recent studies on B-G in periodontal and implant therapy, describing its basic properties and mechanism of activity as well as discoursing about state of art and future perspective of utilization. From a demonstrated clinical benefit as bone graft for the elimination of osseous defects due to periodontal disease (intrabony/furcation defects) and surgeries (alveolar ridge preservation, maxillary sinus augmentation), to a potential use for manufacturing bioactive dental implants, possibly allowing wider case selection criteria together with improved integration rates even in the more challenging osteoporotic and medically compromised patients, this biomaterial represents an important field of study with high academic, clinical and industrial importance.

Fixation of a double-coated titanium-hydroxyapatite focal knee resurfacing implant: a 12-month study in sheep

OBJECTIVE

Focal cartilage lesions according to International Cartilage Repair Society (ICRS) grade 3-4 in the medial femoral condyle may progress to osteoarthritis. When treating such focal lesions with metallic implants a sound fixation to the underlying bone is mandatory. We developed a monobloc unipolar cobalt-chrome (Co-Cr) implant with a double coating; first a layer of commercially pure titanium (c.p.Ti) on top of which a layer of hydroxyapatite (HA) was applied. We hypothesised that such a double coating would provide long-lasting and adequate osseointegration.

DESIGN (MATERIALS AND METHODS)

Unilateral medial femoral condyles of 10 sheep were operated. The implants were inserted in the weight-bearing surface and immediate weight-bearing was allowed. Euthanasia was performed at 6 (three animals) or 12 months (six animals). Osseointegration was analysed with micro-computer tomography (CT), light microscopy and histomorphometric analyses using backscatter scanning electron microscopy (B-SEM) technique.

RESULTS

At 6 months one specimen out of three showed small osteolytic areas at the hat and at 12 months two specimens out of six showed small osteolytic areas at the hat, no osteolytical areas were seen around the peg at any time point. At both time points, a high total bone-to-implant contact was measured with a mean (95% confidence interval - CI) of 90.6 (79-102) at 6 months and 92.3 (89-95) at 12 months, respectively.

CONCLUSIONS

A double coating (Ti + HA) of a focal knee resurfacing Co-Cr implant was presented in a sheep animal model. A firm and consistent bond to bone under weight-bearing conditions was shown up to 1 year.

Heat and radiofrequency plasma glow discharge pretreatment of a titanium alloy: evidence [corrected] for enhanced osteoinductive properties

It is believed that orthopedic and implant longevity can be improved by optimizing fixation, or direct bone-implant contact, through the stimulation of new bone formation around the implant. The purpose of this study was to determine whether heat (600°C) or radiofrequency plasma glow discharge (RFGD) pretreatment of Ti6Al4V stimulated calcium-phosphate mineral formation in cultures of attached MC3T3 osteoprogenitor cells with or without a fibronectin coating. Calcium-phosphate mineral was analyzed by flame atomic absorption spectrophotometry, scanning electron microscopy (SEM)/electron dispersive X-ray microanalysis (EDAX) and Fourier transformed infrared spectroscopy (FTIR). RFGD and heat pretreatments produced a general pattern of increased total soluble calcium levels, although the effect of heat pretreatment was greater than that of RFGD. SEM/EDAX showed the presence of calcium-and phosphorus-containing particles on untreated and treated disks that were more numerous on fibronectin-coated disks. These particles were observed earliest (1 week) on RFGD-pretreated surfaces. FTIR analyses showed that the heat pretreatment produced a general pattern of increased levels of apatite mineral at 2-4 weeks; a greater effect was observed for fibronectin-coated disks compared to uncoated disks. The observed findings suggest that heat pretreatment of Ti6Al4V increased the total mass of the mineral formed in MC3T3 osteoprogenitor cell cultures more than RFGD while the latter pretreatment hastened the early deposition of mineral. These findings help to support the hypothesis that the pretreatments enhance the osteoinductive properties of the alloy.

Heat and radiofrequency plasma glow discharge pretreatment of a titanium alloy promote bone formation and osseointegration

Orthopedic and dental implants manifest increased failure rates when inserted into low density bone. We determined whether chemical pretreatments of a titanium alloy implant material stimulated new bone formation to increase osseointegration in vivo in trabecular bone using a rat model. Titanium alloy rods were untreated or pretreated with heat (600°C) or radiofrequency plasma glow discharge (RFGD). The rods were then coated with the extracellular matrix protein fibronectin (1 nM) or left uncoated and surgically implanted into the rat femoral medullary cavity. Animals were euthanized 3 or 6 weeks later, and femurs were removed for analysis. The number of trabeculae in contact with the implant surface, surface contact between trabeculae and the implant, and the length and area of bone attached to the implant were measured by histomorphometry. Implant shear strength was measured by a pull-out test. Both pretreatments and fibronectin enhanced the number of trabeculae bonding with the implant and trabeculae-to-implant surface contact, with greater effects of fibronectin observed with pretreated compared to untreated implants. RFGD pretreatment modestly increased implant shear strength, which was highly correlated (r(2) = 0.87-0.99) with measures of trabecular bonding for untreated and RFGD-pretreated implants. In contrast, heat pretreatment increased shear strength 3-5-fold for both uncoated and fibronectin-coated implants at 3 and 6 weeks, suggesting a more rapid increase in implant-femur bonding compared to the other groups. In summary, our findings suggest that the heat and RFGD pretreatments can promote the osseointegration of a titanium alloy implant material.

Surgical laser use in implantology and endodontics

The use of surgical lasers has been advocated to aid in the placement and second stage recovery of dental implants, together with soft tissue contouring. In addition, laser use has been suggested as an aid in decontamination of the implant surface in cases of peri-implantitis. In endodontics, the association of laser energy with dentine hypersensitivity, bacteriocidal action and pulp-capping, has led to a growing number of reports as to its beneficial use, together with claims of morphological changes in the canal wall, to enhance endodontic treatment success.

Early Tissue Response to Modified Implant Surfaces Using Back Scattered Imaging

PURPOSE

It is now well known that implant surface properties affect osseointegration. Grit-blasting with abrasives and coating by plasma are methods to modify implant surfaces. This study aimed to compare the direction of new bone formation associated with three types of surfaces.

MATERIALS AND METHODS

Titanium (Ti) alloy rods grit-blasted with alumina abrasive (Group 1, G1), with apatitic abrasive (Group 2, G2), and with apatitic abrasive and plasma-sprayed with hydroxyapatite (Group 3, G3) were implanted in surgically created defects in tibias of New Zealand white rabbits for 2 and 4 weeks. After sacrifice, the implants and surrounding bones were obtained and analyzed using back scattered imaging.

RESULTS

Differences in patterns of bone formation among the groups were observed: originating from the cortical bone towards the implant surface (Type A), surrounding the implant (Type B) and originating from the medullary cavity (Type C). G1 and G3 showed Types A and B while G2 exhibited Types A, B and C. After 4 weeks, greater amount of new bone was observed in G2 group compared with those in G1 and G3 groups.

CONCLUSIONS

This study demonstrated that patterns of bone formation are influenced by methods of surface modification.

Two Human Hydroxyapatite-Coated Dental Implants Retrieved After a 14-Year Loading Period: A Histologic and Histomorphometric Case Report

BACKGROUND

Controversy over the long-term clinical effectiveness of hydroxyapatite (HA)-coated dental implants still persists, despite numerous clinical studies documenting high survival rates. Concerns about the degradation of the coating over the years have been raised; it has been speculated that resorption of the HA could produce a space between the implant and the bone with a resultant mechanical instability.

METHODS

Two HA-coated implants were retrieved due to a fracture of the abutment screws after a loading period of 14 years and were treated to obtain thin ground sections for histologic evaluation.

RESULTS

At low-power magnification, it was possible to observe that the HA coating was in contact with mature bone. No gaps or connective fibrous tissue was found at the implant-bone interface. No epithelial downgrowth was present. No acute or chronic inflammatory cell infiltrate was present at the implant-bone interface. No foreign body reaction was present in the peri-implant tissues. Some osteocytes were in direct contact with the coating. For implant 1, the percentage of bone-titanium contact was 25% +/- 2.1%, and the percentage of bone-HA contact was 35% +/- 1.4%. The total bone-implant contact was approximately 60%. The HA coating appeared to be resorbed in 46% +/- 3.2% of the implant perimeter, especially in the coronal portions of the implant. For implant 2, the mean percentage of bone-HA contact was 13% +/- 1.8%, and the mean percentage of bone-titanium contact was 15% +/- 2.3%. The total bone-implant contact was approximately 28%. The HA coating appeared to be resorbed for a mean of 68% +/- 4.1% of the implant perimeter, especially in the coronal portion of the implant.

CONCLUSIONS

No acute or chronic inflammatory cell infiltrate was present in the peri-implant tissues. No signs of coating infection, fatigue, or failure were observed in two specimens. The HA coating may not be susceptible to degradation or dissolution under long-term function.

A distinguishable observation between survival and success rate outcome of hydroxyapatite-coated implants in 5-10 years in function

PURPOSE

To differentiate between the survival and success definitions of functional hydroxyapatite (HA)-coated implant prosthesis.

METHODS

A total of 248 implants (62 patients), 5-10 years in function, were evaluated. The implant distribution length was 8 mm (6.5%), 10 mm (29.4%), 13 mm (30.2%) and 15 mm (33.9%). The diameter was 3.25 mm (60.1%) and 4 mm (39.9%). Probing depth (PD), gingival index (GI), height of keratinized mucosa (KM) and recession (REC) were measured. Periapical radiographs were taken to estimate the amount of crestal bone resorption (BL), mesially and distally, with the aid of a millimetric-scaled magnifying glass (x 8). Only implants that fulfilled the success rate criteria were considered as successful. All other functional implants were assigned to the non-successful group. All functional implant prostheses were defined as survival ones.

RESULTS

The accumulative survival rate after 5 and 10 years was 94.4% and 92.8%, respectively. Accumulative success rates were 89.9% and 54%, respectively. Implants 13 and 15 mm in length (97.9% and 96.4%, respectively) had the highest survival rate, which was higher over implants 8 and 10 mm in length (75%, P<0.01 and 88.2%, respectively). The survival rate of 4 mm diameter implants compared with 3.25 mm was 96.5% and 90.3%, respectively (P=0.019). The average BL was 1.7, 0.92 and 2.79 mm for the survival, successful and non-successful defined implant groups. PD was 3.26, 2.79 and 4 mm and GI was 0.96, 0.75 and 1.57, respectively. These measurements were statistically different between implant groups. KM and REC measurements showed similar scoring for all groups. A correlation was shown between successful and non-successful implants on the score of GI and PD (P<0.001 in both).

CONCLUSION

A distinguishable observation between survival and success rate was noted particularly in long-term observations. Implant length and diameter have an influence on the survival rate. Clinical parameter scores expressed an influence on the defined implant status.

Thermal and chemical modification of titanium–aluminum–vanadium implant materials: effects on surface properties, glycoprotein adsorption, and MG63 cell attachment

The microstructure, chemical composition and wettability of thermally and chemically modified Ti-6Al-4V alloy disks were characterized and correlated with the degree of radiolabeled fibronectin-alloy surface adsorption and subsequent adhesion of osteoblast-like cells. Heating either in pure oxygen or atmosphere (atm) resulted in an enrichment of Al and V within the surface oxide. Heating (oxygen/atm) and peroxide treatment both followed by butanol treatment resulted in a reduction in content of V, but not in Al. Heating (oxygen/atm) or peroxide treatment resulted in a thicker oxide layer and a more hydrophilic surface when compared with passivated controls. Post-treatment with butanol, however, resulted in less hydrophilic surfaces than heating or peroxide treatment alone. The greatest increases in the adsorption of radiolabeled fibronectin following treatment were observed with peroxide/butanol-treated samples followed by peroxide/butanol and heat/butanol, although binding was only increased by 20-40% compared to untreated controls. These experiments with radiolabeled fibronectin indicate that enhanced adsorption of the glycoprotein was more highly correlated with changes in chemical composition, reflected in a reduction in V content and decrease in the V/Al ratio, than with changes in wettability. Despite promoting only a modest elevation in fibronectin adsorption, the treatment of disks with heat or heat/butanol induced a several-fold increase in the attachment of MG63 cells promoted by a nonadhesive concentration of fibronectin that was used to coat the pretreated disks compared to uncoated disks. Therefore, results obtained with these modifications of surface properties indicate that an increase in the absolute content of Al and/or V (heat), and/or in the Al/V ratio (with little change in hydrophilicity; heat+butanol) is correlated with an increase in the fibronectin-promoted adhesion of an osteoblast-like cell line. It would also appear that the thermal treatment-induced enhancement of cell adhesion in the presence of this integrin-binding protein is due to its increased biological activity, rather than a mass effect alone, that appear to be associated with changes in chemical composition of the metallic surface. Future studies will investigate the influence of the surface chemical composition of various implantable alloys on protein adsorption and receptor-mediated cell adhesion. In addition, by altering the properties of bound osteogenic protein enhancing exposure to cell integrin binding domains, it may be possible to develop implant surfaces which enhance the attachment, adhesion and developmental response of osteoblast precursors leading to accelerated osseointegration.

Osteoblast-like cell adhesion to bone sialoprotein peptides

A number of studies have suggested that biomimetic peptides can be used in the design of a new generation of prosthetic implants to promote the successful biointegration of the implant materials. In the current study, the in vitro bioactivities of several peptides representing RGD (Arg-Gly-Asp)-containing sequences of bone sialoprotein (BSP) toward an osteoblast-like cell line (MC3T3-E1) were examined to provide insight into the molecular basis of BSP's interaction with bone cells. BSP residues 283-288, 281-290, 278-293 and 278-302 were coated on polystyrene surfaces in 96-well non-tissue (untreated) culture plates, and their osteoblast adhesive properties compared to intact BSP and fibronectin as positive controls. BSP peptides 278-302 and 278-293 were found to be the most potent in their adhesive activity, increasing the number of adherent cells to 350% of control levels at an added concentration of 1 microM. Since these two peptides were equivalent in potency, it is suggested that the region 294-302 beyond the RGD domain is not necessary for cell binding. In comparison, peptides 283-288 and 281-290 were only active at concentrations greater than 200 microM. 50-70% of the peptide-stimulated adhesion was inhibited by the pretreatment of cell suspensions with solution phase RGD, suggesting that a portion of the peptides' adhesive effects was specific and integrin-mediated, although other non-RGD flanking regions were probably also involved in the mechanism of adhesion. Importantly, a modified BSP peptide, in which an aspartic acid residue at position 288 of the RGD sequence was replaced by a glutamic acid residue to form RGE, was completely inactive as a cell adhesion stimulus at concentrations up to 200 microM. Thus, despite the potential role of non-RGD flanking regions, an intact RGD tripeptide was essential for all of the adhesive activity of the BSP peptides.

Physicochemical study of plasma-sprayed hydroxyapatite-coated implants in humans

This study represents the first report of the physical and chemical changes occurring in coatings of failed hydroxyapatite (HA)-coated titanium implants obtained from a comprehensive, multicenter human dental implant study. A total of 53 retrieved samples were obtained and compared with unimplanted controls with the same manufacturer and similar manufacture dates. Forty-five retrieved implants were examined for surface characteristics and bulk composition. Implants were staged based on implantation history: stage 1 (implants retrieved between surgical placement and surgical uncovering), stage 2 (implants retrieved at surgical uncovering and evaluation), stage 3 (implants retrieved between surgical uncovering evaluation and occlusal loading), and stage 4 (implants retrieved after occlusal loading). Scanning electron microscopy showed progressive coating thinning with implantation time. At later stages, bare Ti metal was detected by energy-dispersive X-ray analysis and electron spectroscopy for chemical analysis. Increases in Ti and Al (2-7.5 atm % each) were detected at the apical ends of all stage 4 samples. In unimplanted coatings, X-ray diffraction analysis demonstrated the presence of amorphous calcium phosphate, beta-tricalcium phosphate, tetracalcium phosphate, and calcium oxide in addition to large hydroxyapatite crystals (c axis size, D002 = 429 +/- 13 A; a axis size, D300 = 402 +/- 11 A, a/c aspect ratio 0.92). The nonapatitic phases disappeared with increased implantation time, although there was a persistence of amorphous calcium phosphate. Bulk coating chemical analysis showed that Ca/P ratios for implant controls (1.81 +/- 0.01) were greater than stoichiometric HA (1.67) and decreased for implant stages 3 and 4 (1.69 +/- 0.09 and 1.67 +/- 0.09, respectively), explained by the dissolution of the non apatitic phases. Crystal sizes also changed with implantation times, being smaller than the control at all but stage 4. Fourier transform infrared analyses agreed with these results, and also indicated the accumulation of bone (protein and carbonate-apatite) in the retrieved coatings. The accumulation of bone was not stage dependent. These findings indicate that there was some biointegration with the surrounding bone, but the greatest changes occurred with the HA coating materials, their loss, and chemical change.