Collagen-coated poly(L-lactide-co-ɛ-caprolactone) film: a promising scaffold for cultured periosteal sheets

Osteoclastogenic Potential of Tissue-Engineered Periosteal Sheet: Effects of Culture Media on the Ability to Recruit Osteoclast Precursors

Cell culture media influence the characteristics of human osteogenic periosteal sheets. We have previously found that a stem cell medium facilitates growth and collagen matrix formation in vitro and osteogenesis in vivo. However, it has not yet been demonstrated which culture medium is superior for osteoclastogenesis, a prerequisite for reconstruction of normal bone metabolic basis. To address this question, we compared chemotaxis and osteoclastogenesis in tissue-engineered periosteal sheets (TPSs) prepared with two types of culture media. Periosteal tissues obtained from adult volunteers were expanded with the conventional Medium 199 or with the stem cell medium, MesenPRO. Hematopoietic enhanced-green-fluorescent-protein (EGFP)-nude mice were prepared by γ-irradiation of Balb/c nu/nu mice and subsequent transplantation of bone marrow cells from CAG-EGFP C57BL/6 mice. TPSs were implanted subcutaneously into the chimeric mice and retrieved after intervals for immunohistopathological examination. EGFP+ cells were similarly recruited to the implantation site in both the TPSs prepared, whereas the distribution of CD11b+ cells was significantly lower in the TPS prepared with the stem cell medium. Instead, osteoclastogenesis was higher in the TPS prepared with the stem cell medium than in the one prepared with the conventional medium. These findings suggest that the stem cell medium is preferable for the preparation of more functional TPSs.

Oral Bone Tissue Engineering: Advanced Biomaterials for Cell Adhesion, Proliferation and Differentiation

The advancements made in biomaterials have an important impact on oral tissue engineering, especially on the bone regeneration process. Currently known as the gold standard in bone regeneration, grafting procedures can sometimes be successfully replaced by a biomaterial scaffold with proper characteristics. Whether natural or synthetic polymers, biomaterials can serve as potential scaffolds with major influences on cell adhesion, proliferation and differentiation. Continuous research has enabled the development of scaffolds that can be specifically designed to replace the targeted tissue through changes in their surface characteristics and the addition of growth factors and biomolecules. The progress in tissue engineering is incontestable and research shows promising contributions to the further development of this field. The present review aims to outline the progress in oral tissue engineering, the advantages of biomaterial scaffolds, their direct implication in the osteogenic process and future research directions.

Medical Applications of Collagen and Hyaluronan in Regenerative Medicine

In order to develop and commercialize for the regenerative medicinal products, smart biomaterials with biocompatibility must be needed. In this chapter, we introduce collagen and hyaluronic acid (HA) as extracellular matrix as well as deal with the molecular mechanism as microenvironment, mechanistic effects, and gene expression. Application of collagen and HA have been reviewed in the area of orthopedics, orthopedics, ophthalmology, dermatology and plastic surgery. Finally, the ongoing and commercial products of collagen and HA for regenerative medicine have been introduced.

Emerging Perspectives in Scaffold for Tissue Engineering in Oral Surgery

Bone regeneration is currently one of the most important and challenging tissue engineering approaches in regenerative medicine. Bone regeneration is a promising approach in dentistry and is considered an ideal clinical strategy in treating diseases, injuries, and defects of the maxillofacial region. Advances in tissue engineering have resulted in the development of innovative scaffold designs, complemented by the progress made in cell-based therapies. In vitro bone regeneration can be achieved by the combination of stem cells, scaffolds, and bioactive factors. The biomimetic approach to create an ideal bone substitute provides strategies for developing combined scaffolds composed of adult stem cells with mesenchymal phenotype and different organic biomaterials (such as collagen and hyaluronic acid derivatives) or inorganic biomaterials such as manufactured polymers (polyglycolic acid (PGA), polylactic acid (PLA), and polycaprolactone). This review focuses on different biomaterials currently used in dentistry as scaffolds for bone regeneration in treating bone defects or in surgical techniques, such as sinus lift, horizontal and vertical bone grafts, or socket preservation. Our review would be of particular interest to medical and surgical researchers at the interface of cell biology, materials science, and tissue engineering, as well as industry-related manufacturers and researchers in healthcare, prosthetics, and 3D printing, too.

Fabrication of Core-Shell PEI/pBMP2-PLGA Electrospun Scaffold for Gene Delivery to Periodontal Ligament Stem Cells

Bone tissue engineering is the most promising technology for enhancing bone regeneration. Scaffolds loaded with osteogenic factors improve the therapeutic effect. In this study, the bioactive PEI (polyethylenimine)/pBMP2- (bone morphogenetic protein-2 plasmid-) PLGA (poly(D, L-lactic-co-glycolic acid)) core-shell scaffolds were prepared using coaxial electrospinning for a controlled gene delivery to hPDLSCs (human periodontal ligament stem cells). The pBMP2 was encapsulated in the PEI phase as a core and PLGA was employed to control pBMP2 release as a shell. First, the scaffold characterization and mechanical properties were evaluated. Then the gene release behavior was analyzed. Our results showed that pBMP2 was released at high levels in the first few days, with a continuous release behavior in the next 28 days. At the same time, PEI/pBMP2 showed high transfection efficiency. Moreover, the core-shell electrospun scaffold showed BMP2 expression for a much longer time (more than 28 days) compared with the single axial electrospun scaffold, as evaluated by qRT-PCR and western blot after culturing with hPDLSCs. These results suggested that the core-shell PEI/pBMP2-PLGA scaffold fabricated by coaxial electrospinning had a good gene release behavior and showed a prolonged expression time with a high transfection efficiency.

Three-dimensional poly (ε-caprolactone)/hydroxyapatite/collagen scaffolds incorporating bone marrow mesenchymal stem cells for the repair of bone defects

We previously demonstrated that three-dimensional (3D) hydroxyapatite (HAP)-collagen (COL)-coated poly(ε-caprolactone) (PCL) scaffolds (HAP-COL-PCL) possess appropriate nano-structures, surface roughness, and nutrients, providing a favorable environment for osteogenesis. However, the effect of using 3D HAP-COL-PCL scaffolds incorporating BMSCs for the repair of bone defects in rats has been not evaluated. 3D PCL scaffolds coated with HAP, collagen or HAP/COL and incorporating BMSCs were implanted into calvarial defects. At 12 weeks after surgery, the rats were sacrificed and crania were harvested to assess the bone defect repair using microcomputed tomography (micro-CT), histology, immunohistochemistry and sequential fluorescent labeling analysis. 3D micro-CT reconstructed images and quantitative analysis showed that HAP-COL-PCL groups possessed better bone-forming capacity than HAP-PCL groups or COL-PCL groups. Fluorescent labeling analysis revealed the percentage of tetracycline labeling, alizarin red labeling, and calcein labeling in HAP-COL-PCL groups were all greater than in the other two groups (P < 0.05), and the result was confirmed by immunohistochemical staining and histological analysis of bone regeneration. This study demonstrates that 3D HAP-COL-PCL scaffolds incorporating BMSCs markedly enhance bone regeneration of bone defects in rats.

Osteoinduction and proliferation of bone-marrow stromal cells in three-dimensional poly (ε-caprolactone)/ hydroxyapatite/collagen scaffolds

BACKGROUND

Osteoinduction and proliferation of bone-marrow stromal cells (BMSCs) in three-dimensional (3D) poly(ε-caprolactone) (PCL) scaffolds have not been studied throughly and are technically challenging. This study aimed to optimize nanocomposites of 3D PCL scaffolds to provide superior adhesion, proliferation and differentiation environment for BMSCs in this scenario.

METHODS

BMSCs were isolated and cultured in a novel 3D tissue culture poly(ε-caprolactone) (PCL) scaffold coated with poly-lysine, hydroxyapatite (HAp), collagen and HAp/collagen. Cell morphology was observed and BMSC biomarkers for osteogenesis, osteoblast differentiation and activation were analyzed.

RESULTS

Scanning Electron Microscope (SEM) micrographs showed that coating materials were uniformly deposited on the surface of PCL scaffolds and BMSCs grew and aggregated to form clusters during 3D culture. Both mRNA and protein levels of the key players of osteogenesis and osteoblast differentiation and activation, including runt-related transcription factor 2 (Runx2), alkaline phosphates (ALP), osterix, osteocalcin, and RANKL, were significantly higher in BMSCs seeded in PCL scaffolds coated with HAp or HAp/collagen than those seeded in uncoated PCL scaffolds, whereas the expression levels were not significantly different in collagen or poly-lysine coated PCL scaffolds. In addition, poly-lysine, collagen, HAp/collagen, and HAp coated PCL scaffolds had significantly more viable cells than uncoated PCL scaffolds, especially scaffolds with HAp/collagen and collagen-alone coatings. That BMSCs in HAp or HAp/collagen PCL scaffolds had remarkably higher ALP activities than those in collagen-coated alone or uncoated PCL scaffolds indicating higher osteogenic differentiation levels of BMSCs in HAp or HAp/collagen PCL scaffolds. Moreover, morphological changes of BMSCs after four-week of 3D culture confirmed that BMSCs successfully differentiated into osteoblast with spread-out phenotype in HAp/collagen coated PCL scaffolds.

CONCLUSION

This study showed a proof of concept for preparing biomimetic 3D poly (ε-caprolactone)/ hydroxyapatite/collagen scaffolds with excellent osteoinduction and proliferation capacity for bone regeneration.

Use of ambulatory anesthesia with manually assisted ventilation for tympanic membrane regeneration therapy in children

PURPOSE

To present the utility of ambulatory anesthesia using manually assisted ventilation via a facemask for tympanic membrane (TM) regeneration therapy in children.

MATERIAL AND METHODS

The study included 10 children (age 4-11years) in whom the duration of perforation before treatment exceeded 6months and who were followed for at least 1year after treatment between December 2009 and December 2012. Under ambulatory anesthesia using manually assisted ventilation via a facemask, TM regenerative therapy with atelocollagen combined with basic fibroblast growth factor was performed in children who could not tolerate the procedure under local anesthesia alone.

RESULTS

All of the children completed the TM regenerative therapy under ambulatory anesthesia in less than 5min. Complete closure was achieved in nine (81.8%) ears after 1year of postoperative follow-up.

CONCLUSION

TM regenerative therapy can be performed under local anesthesia in less than 5min without a skin incision. However, local anesthesia is often insufficient in small children undergoing this procedure. Therefore, ambulatory anesthesia using manually assisted ventilation via a facemask is appropriate to complete this procedure safely in small children.

Tissue culture of human alveolar periosteal sheets using a stem-cell culture medium (MesenPRO-RS™): In vitro expansion of CD146-positive cells and concomitant upregulation of osteogenic potential in vivo

We have previously demonstrated that multilayered periosteal sheets prepared from the explant culture of alveolar periosteum serve as a promising osteogenic grafting material in periodontal tissue regeneration. For the preparation of more potent periosteal sheets, we examined the applicability of stem-cell culture media. Compared to the control medium (Medium 199+10% FBS), periosteal sheets expanded with MesenPRO-RS™ medium exhibited these features: Cells grew three-dimensionally and deposited collagen in the extracellular spaces to form thicker multilayers of cells. Chondrocytic markers were not significantly upregulated. Contractile force was generated in proportion with the increased thickness of the periosteal sheets and the formation of cytoplasmic α-smooth muscle actin fibers. However, myofibroblastic markers were not significantly upregulated. The surface marker CD146 was substantially upregulated, while both CD73 and CD105 were downregulated. Alkaline phosphatase, a representative osteoblastic marker, was not upregulated by osteogenic induction. However, these expanded periosteal sheets exhibited substantially stronger osteogenic differentiation when implanted in nude mice. Therefore, despite our reservations, MesenPRO medium effectively expanded the cells contained in periosteal sheets to promote the formation of thicker multilayers of cells in vitro, and these enhanced periosteal sheets expressed increased osteogenic potential at implantation sites in vivo. In conjunction with data indicating that CD146-positive cells were notably expanded and the recently proposed concept that CD146 is a marker for osteogenic progenitor cells found in the bone marrow stroma, our findings suggest that MesenPRO medium improves the preparation of highly osteogenic periosteal sheets suitable for clinical application largely through the induction of CD146-positive cells.

Stem cell-delivery therapeutics for periodontal tissue regeneration

Periodontitis, an inflammatory disease, is the most common cause of tooth loss in adults. Attempts to regenerate the complex system of tooth-supporting apparatus (i.e., the periodontal ligament, alveolar bone and root cementum) after loss/damage due to periodontitis have made some progress recently and provide a useful experimental model for the evaluation of future regenerative therapies. Concentrated efforts have now moved from the use of guided tissue/bone regeneration technology, a variety of growth factors and various bone grafts/substitutes toward the design and practice of endogenous regenerative technology by recruitment of host cells (cell homing) or stem cell-based therapeutics by transplantation of outside cells to enhance periodontal tissue regeneration and its biomechanical integration. This shift is driven by the general inability of conventional therapies to deliver satisfactory outcomes, particularly in cases where the disease has caused large tissue defects in the periodontium. Cell homing and cell transplantation are both scientifically meritorious approaches that show promise to completely and reliably reconstitute all tissue and connections damaged through periodontal disease, and hence research into both directions should continue. In view of periodontal regeneration by paradigms that unlock the body's innate regenerative potential has been reviewed elsewhere, this paper specifically explores and analyses the stem cell types and cell delivery strategies that have been or have the potential to be used as therapeutics in periodontal regenerative medicine, with particular emphasis placed on the efficacy and safety concerns of current stem cell-based periodontal therapies that may eventually enter into the clinic.

Manual cryopreservation of human alveolar periosteal tissue segments: Effects of pre-culture on recovery rate

Cultured human periosteal sheets constitute a promising grafting material for periodontal tissue regenerative therapy. However, preparation of these sheets usually requires six weeks or longer, and this lengthy commitment and delay limits both clinical applicability and availability. The aim of this study is to develop an efficient, practical, cost-effective cryopreservation method for periosteal tissue segments (PTSs). Human PTSs were aseptically excised from alveolar bone and pre-cultured in Medium 199+10% fetal bovine serum (FBS) for the indicated number of days before they were slowly frozen down to -75°C in a commercial freezing vessel using medium containing 10% dimethyl sulfoxide (Me(2)SO) and various concentrations of FBS. After fast-thawing at 37°C, PTSs were again cultured, and their growth and responses to standard osteogenic induction were evaluated (vs. freshly excised PTSs). Proliferating cells were obtained at the highest levels from cryopreserved PTSs that were pre-cultured for 14 days before freezing. When a concentration of 50% or more FBS was included in the cryopreservation solution, cells migrated out more actively and grew faster. Importantly, osteoinduction up-regulated alkaline phosphatase (ALP) activity and osteoblastic marker mRNAs in cryopreserved PTS-derived sheets just as effectively as it did in native PTS-derived ones. These data suggest that pre-conditioned PTSs can be efficiently cryopreserved in a freezing solution containing high FBS by traditional manual cryopreservation methods without aid of a program freezer or more elaborate equipment.