Porous titanium granules in the treatment of mandibular Class II furcation defects: a consecutive case series

Role of Biomaterials Used for Periodontal Tissue Regeneration—A Concise Evidence-Based Review

Periodontal infections are noncommunicable chronic inflammatory diseases of multifactorial origin that can induce destruction of both soft and hard tissues of the periodontium. The standard remedial modalities for periodontal regeneration include nonsurgical followed by surgical therapy with the adjunctive use of various biomaterials to achieve restoration of the lost tissues. Lately, there has been substantial development in the field of biomaterial, which includes the sole or combined use of osseous grafts, barrier membranes, growth factors and autogenic substitutes to achieve tissue and bone regeneration. Of these, bone replacement grafts have been widely explored for their osteogenic potential with varied outcomes. Osseous grafts are derived from either human, bovine or synthetic sources. Though the biologic response from autogenic biomaterials may be better, the use of bone replacement synthetic substitutes could be practical for clinical practice. This comprehensive review focuses initially on bone graft replacement substitutes, namely ceramic-based (calcium phosphate derivatives, bioactive glass) and autologous platelet concentrates, which assist in alveolar bone regeneration. Further literature compilations emphasize the innovations of biomaterials used as bone substitutes, barrier membranes and complex scaffold fabrication techniques that can mimic the histologically vital tissues required for the regeneration of periodontal apparatus.

Porous Titanium Granules in comparison with Autogenous Bone Graft in Femoral Osseous Defects: A Histomorphometric Study of Bone Regeneration and Osseointegration in Rabbits

Background

The high resorption rate of autogenous bone is a well-documented phenomenon that can lead to insufficient bone quality and quantity in an augmented area. Nonresorbable bone substitutes might perform better than autogenous bone in certain applications if they are able to provide adequate bone formation and graft osseointegration.

Purpose

The aim of this study was to compare the osseous regeneration and graft integration in standardized defects in the rabbit femur treated either with porous titanium granules or autogenous osseous graft.

Materials and Methods

Standardized femoral osseous defects were surgically induced in 45 New Zealand rabbits. Fifteen were treated with porous titanium granules (TIGRAN™-PTG) and membrane (PTGM), 15 with autogenous graft and membrane (AGM), and 15 with membrane alone (CM, control). At six weeks, the defects were assessed histologically and histomorphometrically.

Results

PTGM as compared to AGM presented similar percentages of newly formed bone tissue, but a significantly higher fraction of the region of interest was filled with the bone substitute material. Accordingly, the composite of new bone plus bone substitute material showed significantly higher volumes for PTGM. Yet, the smaller amount of remaining autogenous bone was far better osseointegrated than the titanium granules, which in large regions showed no connection to newly formed bone. Both PTGM and AGM as compared to CM presented higher values of newly formed bone.

Conclusions

This study demonstrated that PTG was similarly effective as autogenous osseous graft in achieving osseous regeneration while PTG performed markedly better in graft volume stability. The resulting higher total percentage of new bone combined with the bone substitute material in PTG could provide a superior foundation for implant placement.

The chemical surface evaluation of black and white porous titanium granules and different commercial dental implants with energy-dispersive x-ray spectroscopy analysis

BACKGROUND

The chemical surface structure of the porous titanium grafts has not been found to study in the literature on the similarity of chemical surfaces of different commercial dental implants.

PURPOSE

The purpose of this study is to investigate the chemical composition and surface energies of white (WPTG) and black porous titanium granules (PTG) by energy dispersive x-ray spectrometry (EDX) analysis to compare with different commercial dental implant surface.

MATERIALS AND METHODS

The surface chemical compositions of six commercially available dental implants with different surface structures, PTG and WPTG were examined by EDX analysis. Surface analyzes were performed on the apical, middle, and coronal parts of each implant and on the top, flank, and valley regions on each side. Surface analyzes of dental implants were evaluated at ×200 and ×2000 magnifications. The EDX evaluation of PTG grafts were evaluated at ×250, ×2000, ×5000, and ×50 000 magnifications.

RESULTS

PTG grafts showed elements of Na (8.88 ± 9.98%), Cl (2.44 ± 1.96%), and Al (0.99 ± 0.37%) as well as Ti (90.06 ± 11.34%) molecule at ×5000 magnification. In WPTG, Ti (%34.55 ± 6.41%) and O (%65.44 ± 6.42%) molecules were detected.

CONCLUSIONS

It has been found that PTG surface was not made of pure titanium, it has different chemical molecules at larger magnifications. Cell culture and experimental studies are needed to establish a relationship between the different commercial implants and the surface structure of the titanium granules.

Periodontal regeneration - furcation defects: a systematic review from the AAP Regeneration Workshop

BACKGROUND

The aim of this review is to present the available evidence regarding the effectiveness of different regenerative approaches for the treatment of furcation defects in specific clinical scenarios compared with conventional surgical therapy to provide clinical guidelines for the therapeutic management of furcation defects and to identify priorities for future research that may advance the understanding of periodontal regenerative medicine.

METHODS

A comprehensive search based on predetermined eligibility criteria was conducted to identify human original studies and systematic reviews on the topic of periodontal regeneration of furcation defects. Two reviewers independently screened the title and abstract of the entries yielded from the initial search. Subsequently, both reviewers read the full-text version of potentially eligible studies, made a final article selection, and extracted the data of the selected studies considering specific clinical scenarios. The clinical scenarios contemplated in this review included the following: 1) facial and interproximal Class I defects in maxillary molars; 2) facial and lingual Class I defects in mandibular molars; 3) facial and interproximal Class II furcation defects in maxillary molars; 4) facial and lingual Class II furcation defects in mandibular molars; 5) Class III furcation defects in maxillary molars; 6) Class III furcation defects in mandibular molars; and 7) Class I, II, or III furcation defects in maxillary premolars. Endpoints of interest included different clinical, radiographic, microbiologic, histologic, and patient-reported outcomes.

RESULTS

The initial search yielded a total of 1,500 entries. The final selection consisted of 150 articles, of which six were systematic reviews, 109 were clinical trials, 27 were case series, and eight were case reports. A summary of the main findings of previously published systematic reviews and the available evidence relative to the indication of regenerative approaches for the treatment of furcation defects compared with conventional surgical therapy are presented. Given the marked methodologic heterogeneity and the wide variety of materials and techniques applied in the selected clinical trials, the conduction of a meta-analysis was not viable.

CONCLUSIONS

On the basis of the reviewed evidence, the following conclusions can be drawn. 1) Periodontal regeneration has been demonstrated histologically and clinically for the treatment of maxillary facial or interproximal and mandibular facial or lingual Class II furcation defects. 2) Although periodontal regeneration has been demonstrated histologically for the treatment of mandibular Class III defects, the evidence is limited to one case report. 3) Evidence supporting regenerative therapy in maxillary Class III furcation defects in maxillary molars is limited to clinical case reports. 4) In Class I furcation defects, regenerative therapy may be beneficial in certain clinical scenarios, although most Class I furcation defects may be successfully treated with non-regenerative therapy. 5) Future research efforts should be primarily directed toward the conduction of clinical trials to test novel regenerative approaches that place emphasis primarily on patient-reported outcomes and also on histologic demonstration of periodontal regeneration. Investigators should also focus on understanding the influence that local, systemic, and technical factors may have on the outcomes of regenerative therapy in furcation defects.

Regenerative Medicine for Periodontal and Peri-implant Diseases

The balance between bone resorption and bone formation is vital for maintenance and regeneration of alveolar bone and supporting structures around teeth and dental implants. Tissue regeneration in the oral cavity is regulated by multiple cell types, signaling mechanisms, and matrix interactions. A goal for periodontal tissue engineering/regenerative medicine is to restore oral soft and hard tissues through cell, scaffold, and/or signaling approaches to functional and aesthetic oral tissues. Bony defects in the oral cavity can vary significantly, ranging from smaller intrabony lesions resulting from periodontal or peri-implant diseases to large osseous defects that extend through the jaws as a result of trauma, tumor resection, or congenital defects. The disparity in size and location of these alveolar defects is compounded further by patient-specific and environmental factors that contribute to the challenges in periodontal regeneration, peri-implant tissue regeneration, and alveolar ridge reconstruction. Efforts have been made over the last few decades to produce reliable and predictable methods to stimulate bone regeneration in alveolar bone defects. Tissue engineering/regenerative medicine provide new avenues to enhance tissue regeneration by introducing bioactive models or constructing patient-specific substitutes. This review presents an overview of therapies (e.g., protein, gene, and cell based) and biomaterials (e.g., resorbable, nonresorbable, and 3-dimensionally printed) used for alveolar bone engineering around teeth and implants and for implant site development, with emphasis on most recent findings and future directions.

Porous titanium granules in critical size defects of rabbit tibia with or without membranes

Recently, porous titanium granules (PTGs) have been indicated for the preservation of the dimensions of post-extraction sockets, as a filler in sinus lift procedures and for the treatment of peri-implant and periodontal defects, based on the osteoconductivity and dimensional stability of the titanium granules. However, there is a lack of information regarding the use of this material in larger defects and in conjunction with membranes. The objective of this study is to test the behavior of PTGs used to fill critical size defects in rabbit tibiae, with and without membranes. Critical defects were created in both tibiae of rabbits, divided randomly into three groups: Group A (defect filled with PTG), Group B (defect filled with PTG+collagen membrane) and a control group (empty defect). After six weeks, histomorphometric analysis was performed. The results showed more defect closures at the cortical area (87.37%±2.2%) and more bone formation at the marrow area (57.6%±1.3%) in Group B, in comparison with the other groups (P<0.05); the use of membranes improved the material stability expressed as more percentages of the original material when membranes were used (P<0.05). Finally, inflammatory reactions were observed when the granules were not protected by membranes. In spite of the limitations of this animal study, it may be concluded that PTG particles are osteoconductive and allow bone growth. The PTG particles must be covered by a membrane, especially when grafting larger defects, in order to control particle migration, promote clot stabilization and separate the PTG graft from undesired soft tissue cells.

Evaluation of dental socket healing after using of porous titanium granules: Histologic and histomorphometric assessment in dogs

Background:

Different methods have been suggested to preserve bone architecture following traumatic events such as teeth extraction. The purpose of the study was to histologically and histomorphometrically evaluate the dental socket healing after applying porous titanium granules (PTG) in dogs.

Materials and Methods:

Four healthy male dogs were involved in the present 6-weeks experimental animal study. Three sockets were surgically created in each side of dog's mandible. One of the sockets in one side was randomly filled by PTG and covered by a resorbable membrane (Tigran + membrane group). Another socket was left unfilled and just covered by the same membrane (membrane group) and the last one was left unfilled and uncovered as the control group. The dogs were killed at two time intervals (2 weeks and 6 weeks, two dogs at each time point). All samples were histologically evaluated under an optical microscope for a new bone formation. Data were analyzed by SPSS ver. 16 and Kruskal–Wallis and Mann–Whitney tests were used to compare data in different groups (α = 0.05).

Results:

There was a significant difference between the Tigran + membrane and the control group in 2 and 6 weeks in the mean amount of total regenerated bone (P < 0.05). The mean amounts of woven, lamellar, and total regenerated bone showed significant differences between 2 weeks and 6 weeks for all three groups (P < 0.05).

Conclusions:

It can be assumed that the use of Tigran bone substitute with membrane can promote the bone regeneration in bone defects.

Porous Titanium Granules and Blood for Bone Regeneration around Dental Implants: Report of Four Cases and Review of the Literature

A regenerative procedure treating a local osseous defect around titanium dental implant using porous titanium granules is described in four patients. Porous titanium granules represent, for maxillofacial surgery, a new alternative in augmenting osseous defects. Its earliest application was in the field of orthopedics for stabilization of tibia plateau fractures and for reoperations in prosthetic fixation of femoral stems. There is emerging scientific evidence regarding titanium for its potential use in the maxillofacial area and porous titanium granules are now commercially available. The scientific background for the osteoconductive use of porous titanium granules is elucidated in this paper and the supporting literature is reviewed.