Carbon-fibre cage reconstruction in anterior cervical corpectomy for multilevel cervical spondylosis: mid-term outcomes

The Association between High Preoperative MRI-based Vertebral Bone Quality (VBQ) Score and Titanium Mesh Cage Subsidence after Anterior Cervical Corpectomy and Fusion

OBJECTIVE

Recently, the MRI-based vertebral bone quality (VBQ) score has been shown to correlate with Hounsfeld units (HU) value, dual-energy X-ray absorptiometry (DEXA) T-score and predict osteoporotic fractures. Preoperative cervical HU value is an independent correlative factor for early titanium mesh cage (TMC) subsidence after anterior cervical corpectomy and fusion (ACCF). However, to date the direct association between cervical VBQ score and TMC subsidence has not been studied. This study aims to investigate the predictive effect of cervical VBQ score derived from sagittal non-contrast-enhanced T1-weighted MRI on the early TMC subsidence after ACCF.

METHODS

Patients who underwent one-level ACCF from January 2016 to January 2020 were included. We retrospectively collected baseline data on age, sex, body mass index (BMI), disease type, level of surgery and radiology parameters. The cervical VBQ score was measured using preoperative non-contrast-enhanced T1-weighted MRI. Univariate and multivariate logistic regression analysis were performed to screen the independent risk factors of TMC subsidence. The receiver operating characteristic (ROC) curve and area under curve (AUC) were performed to assess the predictive ability of TMC subsidence based on the cervical VBQ score. Spearman correlation analysis was used to determine the correlations between the cervical VBQ score and TMC subsidence.

RESULTS

A total of 134 patients who underwent one-level ACCF were included in this study, and 46 (34.33%) patients had TMC subsidence. Univariable analyses demonstrated that the age, TMC placement depth and VBQ score were associated with subsidence. The cervical VBQ score in the subsidence group was significantly higher than that in the no subsidence group (3.75 ± 0.45 vs. 3.20 ± 0.42, p < 0.001). The multivariate logistic regression analysis proved that the higher VBQ score (odds ratio[OR] = 13.563, 95% confidence interval [CI] 4.968 - 37.031, p < 0.001) was the only variable that significantly predicted subsidence. Using a VBQ score cutoff value of 3.445, the cervical VBQ score yielded a sensitivity of 69.6% and a specificity of 85.2% with an AUC of 0.810 to differentiate patients with subsidence and with no subsidence.

CONCLUSION

Preoperative higher cervical VBQ score is an independent risk factor for TMC subsidence after ACCF. The cervical VBQ score may be a valuable tool for assisting in distinguishing the presence of TMC subsidence.

A Comparison of Corpectomy ACDF Hybrid Procedures with Nano-Hydroxyapatite/Polyamide 66 Cage and Titanium Mesh Cage for Multi-level Degenerative Cervical Myelopathy: A Stepwise Propensity Score Matching Analysis

OBJECTIVE

Previous studies have found satisfactory clinical results with the nano-hydroxyapatite/polyamide 66 (n-HA/PA66) cage to reconstruct the stability of anterior cervical column. However, studies evaluating the long-term outcomes of the n-HA/PA66 cage in multi-level degenerative cervical myelopathy (MDCM) have not been reported. This study aims to compare the outcomes of corpectomy anterior cervical discectomy and fusion (ACDF) hybrid procedures between the n-HA/PA66 cage and titanium mesh cage (TMC) to treat MDCM.

METHODS

After the screening for eligibility, this retrospective study involved 90 patients who underwent corpectomy ACDF hybrid (CACDFH) procedure from June 2013 to June 2018. The CACDFH procedure is the combination of ACDF and anterior cervical corpectomy and fusion (ACCF). According to the cage utilized, we categorized patients into a n-HA/PA66 cage group and a TMC group. Then, stepwise propensity score matching (PSM) was performed to maintain comparable clinical data between groups. All the patients were followed up ≥4 years and the longest follow-up time was 65.43 (±11.49) months. Cage subsidence, adjacent segment degeneration (ASD), segmental height (SH), segmental angle (SA), cervical lordosis (CL), and clinical data (visual analogue scale [VAS] and Japanese Orthopaedic Association [JOA] score) was evaluated preoperatively, at 1 week, and at the final surgery follow-up. The independent student's t test and chi-square test were applied to compare the differences between groups.

RESULTS

Through PSM analysis, 25 patients from the n-HA/PA66 group were matched to 25 patients in the TMC group. The occurrence of ASD was 16.0% (4/25) in the n-HA/PA 66 group, which was significantly less than in the TMC group at 44.0% (11/25) (p = 0.031). Moreover, the cage subsidence rate was significantly higher in the TMC group as compared to the n-HA/PA 66 group (40.0% vs. 12.0%, p = 0.024). But there was no significant difference in SH, SA, and CL at any time after surgery as determined through follow-up. The VAS and JOA scores significantly improved in both groups at 3 months postoperative and at final follow-up. However, there were no significant differences in the VAS and JOA score at any time between the two groups in preoperative (p > 0.05).

CONCLUSION

The n-HA/PA66 cage is associated with lower rate of cage subsidence and ASD than the TMC in the treatment of MDCM. The n-HA/PA66 cage could be superior to the TMC in corpectomy ACDF hybrid procedures.

Hydroxyapatite Use in Spine Surgery—Molecular and Clinical Aspect

Hydroxyapatite possesses desirable properties as a scaffold in tissue engineering: it is biocompatible at a site of implantation, and it is degradable to non-toxic products. Moreover, its porosity enables infiltration of cells, nutrients and waste products. The outcome of hydroxyapatite implantation highly depends on the extent of the host immune response. Authors emphasise major roles of the chemical, morphological and physical properties of the surface of biomaterial used. A number of techniques have been applied to transform the theoretical osteoconductive features of HAp into spinal fusion systems—from integration of HAp with autograft to synthetic intervertebral implants. The most popular uses of HAp in spine surgery include implants (ACDF), bone grafts in posterolateral lumbar fusion and transpedicular screws coating. In the past, autologous bone graft has been used as an intervertebral cage in ACDF. Due to the morbidity related to autograft harvesting from the iliac bone, a synthetic cage with osteoconductive material such as hydroxyapatite seems to be a good alternative. Regarding posterolateral lumbar fusion, it requires the graft to induce new bone growth and reinforce fusion between the vertebrae. Hydroxyapatite formulations have shown good results in that field. Moreover, the HAp coating has proven to be an efficient method of increasing screw fixation strength. It can decrease the risk of complications such as screw loosening after pedicle screw fixation in osteoporotic patients. The purpose of this literature review is to describe in vivo reaction to HAp implants and to summarise its current application in spine surgery.

Anterior 1-2 Level Cervical Corpectomy and Fusion for Degenerative Cervical Disease: A Retrospective Study With Lordotic Porous Tantalum Cages. Long-Term Changes in Sagittal Alignment and Their Clinical and Radiological Implications After Cage Subsidence

BACKGROUND

Despite the advances in anterior cervical corpectomy and fusion (ACCF) as a reconstructive surgical technique, the rate of complications related to artificial implants remains high. The purpose of this study was to investigate the long-term clinical course of ACCF with tantalum trabecular metal (TTM)-lordotic implants. Focus is placed on the relevance and influence of implant subsidence on sagittal alignment and the related clinical implications.

METHODS

Retrospective, observational study of prospectively collected outcomes including 56 consecutive patients with degenerative cervical disc disease (myelopathy and/or radiculopathy). All patients underwent 1-level or 2-level ACCF with TTM-lordotic implants. The mean duration of follow-up was 4.85 years.

RESULTS

The fusion rate at the end of follow-up was 98.11% (52/53). Implant subsidence occurred in 44 (83.01%) cases, including slight subsistence (<3 mm) in 37 (69.81%) and severe subsidence (>3 mm) in 7 cases (13.2%). The greatest degree of subsidence developed in the first 3 months postoperatively (P = 0.003). No patients presented a significant increase in implant subsidence beyond the second year of follow-up. The most common site of severe subsidence was the anterior region of the cranial end plate (4/7). At the end of follow-up, C1-C7 lordosis and segmental-Cobb angle of the fused segment increased on average by 5.06 ± 8.26 and 1.98 ± 6.02 degrees, respectively, though this difference failed to reach statistical significance (P > 0.05). Visual analog scale and Neck Disability Index scores improved at the conclusion of follow-up (P < 0.05).

CONCLUSIONS

ACCF with anterior cervical reconstruction using TTM-lordotic implants and anterior cervical plating for treatment of cervical degenerative disease has high fusion rates and good clinical outcome. The osteoconductive properties of TTM provide immediate stabilization and eliminate the need for bone grafts to ensure solid bone fusion. Before fusion occurs, asymptomatic implant settlement into the vertebral body is inevitable. However, lack of parallelism and reduced contact surface between the implant and the vertebral end plate are major risk factors for severe further subsidence, which may negatively affect the clinical outcomes.

LEVEL OF EVIDENCE: 4

Anterior Corpectomy and Plating with Carbon-PEEK Instrumentation for Cervical Spinal Metastases: Clinical and Radiological Outcomes

Background: Anterior cervical corpectomy and plating has been recognized as a valuable approach for the surgical treatment of cervical spinal metastases. This study aimed to report the surgical, clinical and radiological outcomes of anterior carbon-PEEK instrumentations for cervical spinal metastases. Methods: Demographical, clinical, surgical and radiological data were collected from 2017 to 2020. The Neck Disability Index (NDI) questionnaire for neck pain, EORTC QLQ-C30 questionnaire for quality of life, Nurick scale for myelopathy and radiological parameters (segmental Cobb angle and cervical lordosis) were collected before surgery, at 6 weeks postoperatively and follow-up. Results: Seventeen patients met inclusion criteria. Mean age was 60.9 ± 7.6 years and mean follow-up was 12.9 ± 4.0 months. The NDI (55.4 ± 11.7 to 25.1 ± 5.4, p < 0.001) scores and the EORTC QLQ-C30 global health/QoL significantly improved postoperatively and at the last follow-up. The segmental Cobb angle (10.7° ± 5.6 to 3.1° ± 2.2, p < 0.001) and cervical lordosis (0.9° ± 6.7 to −6.2 ± 7.8, p = 0.002) significantly improved postoperatively. Only one minor complication (5.9%) was recorded. Conclusions: Carbon/PEEK implants represent a safe alternative to commonly used titanium ones and should be considered in cervical spinal metastases management due to their lower artifacts in postoperative imaging and radiation planning. Further larger comparative and cost-effectiveness studies are needed to confirm these results.

Biomechanical Comparison of a New Memory Compression Alloy Plate versus Traditional Titanium Plate for Anterior Cervical Discectomy and Fusion: A Finite Element Analysis

Objective

To compare the biomechanical properties of a new memory compression alloy plate and traditional titanium plate after anterior cervical discectomy and fusion (ACDF).

Methods

A finite element model of the C3-7 segments was developed and validated. The C5-6 disc was removed, and an intervertebral cage made of peek material was implanted. Then, a new memory compression alloy plate composed of Ti-Ni memory alloy and a traditional titanium plate were integrated at the C5-6 segment. All models were subjected to a load of 73.6 N to simulate the head weight and 1 Nm of flexion-extension, lateral bending, and axial rotation. The range of segmental motion (ROM) and stress on the prostheses, adjacent discs, and endplates were analyzed.

Results

Compared with intact status, ACDF with the new prothesis and traditional titanium plate reduced the ROM of C5-6 in six directions by 95.2%-100% and increased that of adjacent discs (C4-5 and C6-7) by 4.8%-112.5%. Adjacent disc stress peaks were higher for the traditional titanium plate (0.7-4.2 MPa) than for the new prosthesis (0.6-4.1 MPa). Endplate stress peaks were the highest in ACDF with the new prosthesis (15.6-53.3 MPa), followed by ACDF with traditional titanium plate (5.0-29.4 MPa). Stress peaks were significantly lower for the new prothesis (12.8-52.3 MPa) than for the traditional titanium plate (397.0-666.1 MPa).

Conclusions

The new prosthesis improved the immediate stability of the surgical site and had an elastic modulus that was smaller than that of traditional titanium plate, making it conducive to reducing stress shielding and the impact on the adjacent intervertebral disc.