Bone induction by AdBMP-2/collagen implants

Matrix Mediated Viral Gene Delivery: A Review

Polymeric matrices inherently protect viral vectors from pre-existing immune conditions, limit dissemination to off-target sites, and can sustain vector release. Advancing methodologies in development of particulate based vehicles have led to improved encapsulation of viral vectors. Polymeric delivery systems have contributed to increasing cellular transduction, responsive release mechanisms, cellular infiltration, and cellular signaling. Synthetic polymers are easily customizable, and are capable of balancing matrix retention with cellular infiltration. Natural polymers contain inherent biorecognizable motifs adding therapeutic efficacy to the incorporated viral vector. Recombinant polymers use highly conserved motifs to carefully engineer matrices, allowing for precise design including elements of vector retention and responsive release mechanisms. Composite polymer systems provide opportunities to create matrices with unique properties. Carefully designed matrices can control spatiotemporal release patterns that synergize with approaches in regenerative medicine and antitumor therapies.

An ectopic study of apatite-coated silk fibroin scaffolds seeded with AdBMP-2-modified canine bMSCs

The present study was undertaken to evaluate ectopic new bone formation effects of apatite-coated silk fibroin scaffolds (mSS) seeded with adenovirus-mediated bone morphogenic protein-2 gene (AdBMP-2) transduced canine bone marrow stromal cells (bMSCs) in nude mice. In this study, bMSCs derived from canine were cultured and transduced with AdBMP-2 adenovirus-mediated enhanced green fluorescent protein gene (AdEGFP) in vitro. Osteogenic differentiation of bMSCs was determined by alkaline phosphatase (ALP) activity analysis, and the transcript levels for BMP-2, osteopontin (OPN), osteocalcin (OCN) and bone sialoprotein (BSP) genes via real-time quantitative PCR (RT-qPCR) analysis. The ectopic bone formation effects of mSS seeded with AdBMP-2-modified bMSCs were evaluated through histological and histomorphological analysis 4, 8 and 12 weeks post-operation in nude mice. ALP activity was statistically increased in the AdBMP-2 group, when compared with control groups. The mRNA expression of BMP-2, OPN, OCN and BSP was also statistically up-regulated 6 and 9 days after AdBMP-2 transduction. Significantly higher bone volume was achieved in AdBMP-2-transduced bMSCs/mSS constructs than that of AdEGFP-transduced bMSCs/mSS or bMSCs/mSS groups at 4, 8 and 12 weeks (P < 0.01). These results demonstrated that mSS seeded with AdBMP-2-transduced canine bMSCs can promote ectopic new bone formation and maturation in nude mice, suggesting the potential of this silk-scaffold-based tissue-engineered bone for further bone regeneration studies in canine models.

Targeted gene-and-host progenitor cell therapy for nonunion bone fracture repair

Nonunion fractures present a challenge to orthopedics with no optimal solution. In-vivo DNA electroporation is a gene-delivery technique that can potentially accelerate regenerative processes. We hypothesized that in vivo electroporation of an osteogenic gene in a nonunion radius bone defect site would induce fracture repair. Nonunion fracture was created in the radii of C3H/HeN mice, into which a collagen sponge was placed. To allow for recruitment of host progenitor cells (HPCs) into the implanted sponge, the mice were housed for 10 days before electroporation. Mice were electroporated with either bone morphogenetic protein 9 (BMP-9) plasmid, Luciferase plasmid or injected with BMP-9 plasmid but not electroporated. In vivo bioluminescent imaging indicated that gene expression was localized to the defect site. Microcomputed tomography (µCT) and histological analysis of murine radii electroporated with BMP-9 demonstrated bone formation bridging the bone gap, whereas in the control groups the defect remained unbridged. Population of the implanted collagen sponge by HPCs transfected with the injected plasmid following electroporation was noted. Our data indicate that regeneration of nonunion bone defect can be attained by performing in vivo electroporation with an osteogenic gene combined with recruitment of HPCs. This gene therapy approach may pave the way for regeneration of other skeletal tissues.

BMPs: from bone to body morphogenetic proteins

The family of bone morphogenetic proteins (BMPs) comprises approximately 30 secreted cytokines that signal through transmembrane serine/threonine kinase receptors. The BMP signaling pathways are fine-tuned on multiple levels: Extracellular antagonists modify ligand activity; several co-receptors enhance or inhibit downstream signaling events through multiple mechanisms; and intracellular molecules further regulate the signaling outcome and mediate crosstalk with other pathways. BMPs affect structures and processes throughout the entire body, ranging from embryonic patterning and development through stem cells and their niches, to tissue homeostasis and regeneration. This comprehensive involvement in various tissues had not been expected by Marshall Urist, who initially discovered the ability of an unknown factor in bone to induce bone growth in muscle and subsequently suggested the name "bone morphogenetic protein." Today, recombinant BMPs are used in clinical practice for the treatment of bone and kidney disorders, and new genetically modified BMPs are emerging as promising tools in regenerative medicine and tissue engineering. Clearly, the functions of BMPs within the body are more versatile than initially suspected. To discuss modern trends in BMP signaling, leaders in the field met for the First International BMP Workshop in Berlin in September 2009. Here, we summarize new insights on the roles of BMPs in various tissues and highlight recent findings in cell, structural, and developmental biology as well as the therapeutic potential of BMPs. Finally, we conclude that BMPs today deserve to be called body morphogenetic proteins.

The noninvasive, quantitative, in vivo assessment of adenoviral-mediated gene delivery in skin wound biomaterials

Because there are few reports using gene delivery in clinically-approved synthetic matrices, we examined the feasibility of using a noninvasive imaging system to study the kinetics of luciferase gene expression when delivered in an adenoviral vector. Using a mouse model of full thickness injury, we quantified the kinetics of gene expression, determined the optimal dose of particle delivery, and established the temporal importance of drug delivery in obtaining optimal gene expression. Specifically, we found that the ideal time to deliver adenovirus to a graft is during the early phase of graft wound closure (days 0-3 post-operatively) for a peak of gene expression to occur 7 days after delivery. Under these conditions, there is a saturating dose of 6 x 10(8) adenoviral particles per graft. In light of these findings, we examined whether the efficacy of delivery could be increased by modulating the composition of the grafts. When a collagen gene-activated matrix (GAM) containing basic fibroblast growth factor (FGF2) was compared to matrix alone, a significant increase in gene expression is observed when identical amounts of vector are delivered (p<0.05). Taken together, these results show how a noninvasive and quantitative assessment of gene expression can be used to optimize gene delivery and that the composition of matrices can dramatically influence gene expression in the wound bed.

Orthopedic gene therapy in 2008

Orthopedic disorders, although rarely fatal, are the leading cause of morbidity and impose a huge socioeconomic burden. Their prevalence will increase dramatically as populations age and gain weight. Many orthopedic conditions are difficult to treat by conventional means; however, they are good candidates for gene therapy. Clinical trials have already been initiated for arthritis and the aseptic loosening of prosthetic joints, and the development of bone-healing applications is at an advanced, preclinical stage. Other potential uses include the treatment of Mendelian diseases and orthopedic tumors, as well as the repair and regeneration of cartilage, ligaments, and tendons. Many of these goals should be achievable with existing technologies. The main barriers to clinical application are funding and regulatory issues, which in turn reflect major safety concerns and the opinion, in some quarters, that gene therapy should not be applied to nonlethal, nongenetic diseases. For some indications, advances in nongenetic treatments have also diminished enthusiasm. Nevertheless, the preclinical and early clinical data are impressive and provide considerable optimism that gene therapy will provide straightforward, effective solutions to the clinical management of several common debilitating disorders that are otherwise difficult and expensive to treat.

Dexamethasone modulates BMP-2 effects on mesenchymal stem cells in vitro

Dexamethasone/ascorbic acid/glycerolphosphate (DAG) and bone morphogenic protein (BMP)-2 are potent agents in cell proliferation and differentiation pathways. This study investigates the in vitro interactions between dexamethasone and BMP-2 for an osteoblastic differentiation of mesenchymal stem cells (MSCs). Bone marrow-derived human MSCs were cultured with DAG (group A), BMP-2 + DAG (group B), and DAG + BMP-2 combined with a porous collagen I/III scaffold (group C). RT-PCR, ELISA, immuncytochemical stainings and flow cytometry analysis served to evaluate the osteogenic-promoting potency of each of the above conditions in terms of cell morphology/viability, antigen presentation, and gene expression. DAG induced collagen I secretion from MSCs, which was further increased by the combination of DAG + BMP-2. In comparison, the collagen scaffold and the control samples showed no significant influence on collagen I secretion of MSCs. DAG stimulation of MSCs led also to a steady but not significant increase of BMP-2 level. A DAG and more, a DAG + BMP-2, stimulation increased the number of mesenchymal cells (CD105+/CD73+). All samples showed mRNA of ALP, osteopontin, Runx2, Twist 1 and 2, Notch-1/2, osteonectin, osteocalcin, BSP, and collagen-A1 after 28 days of in vitro culture. Culture media of all samples showed a decrease in Ca(2+) and PO(4) (2-) concentration, whereas a collagen-I-peak only occurred at day 28 in DAG- and DAG + BMP-2-stimulated bone marrow cells. In conclusion, BMP-2 enhances DAG-induced osteogenic differentiation in mesenchymal bone marrow cells. Both agents interact in various ways and can modify osteoblastic bone formation.

Induction of angiogenesis in tissue-engineered scaffolds designed for bone repair: a combined gene therapy-cell transplantation approach

One of the fundamental principles underlying tissue engineering approaches is that newly formed tissue must maintain sufficient vascularization to support its growth. Efforts to induce vascular growth into tissue-engineered scaffolds have recently been dedicated to developing novel strategies to deliver specific biological factors that direct the recruitment of endothelial cell (EC) progenitors and their differentiation. The challenge, however, lies in orchestration of the cells, appropriate biological factors, and optimal factor doses. This study reports an approach as a step forward to resolving this dilemma by combining an ex vivo gene transfer strategy and EC transplantation. The utility of this approach was evaluated by using 3D poly(lactide-co-glycolide) (PLAGA) sintered microsphere scaffolds for bone tissue engineering applications. Our goal was achieved by isolation and transfection of adipose-derived stromal cells (ADSCs) with adenovirus encoding the cDNA of VEGF. We demonstrated that the combination of VEGF releasing ADSCs and ECs results in marked vascular growth within PLAGA scaffolds. We thereby delineate the potential of ADSCs to promote vascular growth into biomaterials.

Gene therapy applications for fracture-healing

Biologic therapies to promote fracture-healing such as use of bone morphogenetic proteins (BMPs) are being increasingly employed in multiple clinical scenarios. However, it has been challenging to design therapies that deliver sufficient quantities of protein over a sustained time period. A potential solution is the application of gene therapy that transfers genetic information to host cells at the fracture site, resulting in the continuous and localized production of the desired proteins. This approach has demonstrated tremendous potential in preclinical animal models of fracture-healing. This article will review the current state of gene therapy approaches to fracture-healing with an emphasis on potential clinical applications.

Healing of segmental bone defects by direct percutaneous gene delivery: effect of vector dose

Previous studies have demonstrated the ability of direct adenoviral BMP-2 (Ad.BMP-2) gene delivery to enhance bone repair. Nevertheless, in studies using a rat segmental defect model, it has not proved possible to achieve reliably full osseous union in all animals. To address this issue, we evaluated the effect of vector dose on healing. Critical-size defects were created in the right femora of 27 Sprague-Dawley rats. The defects received a single, intralesional, percutaneous injection of 2.7 x 10(7) (low dose), 2.7 x 10(8) (medium dose), or 2.7 x 10(9) (high dose) plaque-forming units of Ad.BMP-2. After 8 weeks, femora were evaluated by X-ray, dual-energy X-ray absorptiometry, microcomputed tomography (microCT), and histology. The high dose of vector bridged 100%, the medium dose 11%, and the low dose 25% of the defects, as evaluated by X-ray and microCT imaging. Bone mineral content and bone volume of the defects receiving the high dose of vector were significantly higher than those of both groups receiving lower doses. Histologically, defects treated with the high dose were filled by trabecular bone and small amounts of cartilage, whereas large areas of fibrous tissue and cartilage remained in the defects receiving lower doses. However, the newly formed bone lacked the structural organization of native bone, suggesting that further maturation is necessary.

Review: gene- and stem cell-based therapeutics for bone regeneration and repair

Many clinical conditions require regeneration or implantation of bone. This is one focus shared by neurosurgery and orthopedics. Current therapeutic options (bone grafting and protein-based therapy) do not provide satisfying solutions to the problem of massive bone defects. In the past few years, gene- and stem cell-based therapy has been extensively studied to achieve a viable alternative to current solutions offered by modern medicine for bone-loss repair. The use of adult stem cells for bone regeneration has gained much focus. This unique population of multipotential cells has been isolated from various sources, including bone marrow, adipose, and muscle tissues. Genetic engineering of adult stem cells with potent osteogenic genes has led to fracture repair and rapid bone formation in vivo. It is hypothesized that these genetically modified cells exert both an autocrine and a paracrine effects on host stem cells, leading to an enhanced osteogenic effect. The use of direct gene delivery has also shown much promise for in vivo bone repair. Several viral and nonviral methods have been used to achieve substantial bone tissue formation in various sites in animal models. To advance these platforms to the clinical setting, it will be mandatory to overcome specific hurdles, such as control over transgene expression, viral vector toxicity, and prolonged culture periods of therapeutic stem cells. This review covers a prospect of cell and gene therapy for bone repair as well as some very recent advancements in stem cell isolation, genetic engineering, and exogenous control of transgene expression.

Applications of gene therapy and adult stem cells in bone bioengineering

Bone tissue engineering is an emerging field, that could become a main therapeutic strategy in orthopedics in coming years. While bone has regenerative abilities that enable the self repair and regeneration of fractures, there are extreme situations in which the extent of bone loss is too large for complete regeneration to occur. In order to achieve bone regeneration, osteogenic genes (mainly from the bone morphogenetic protein family) can be delivered either directly into the target tissue, or by using adult stem cells, which are later implanted into the target site. Engineered adult stem cells combined with biodegradable polymeric scaffolds can be implanted into target sites, with or without ex vivo culture period. Several important factors influence the success of bone engineering approaches including: choice of cell and scaffold, the vector used in order to deliver the osteogenic gene, and the osteogenic gene itself. Cutting-edge imaging technologies, bioinformatics-based analysis of gene expression and exogenous regulation of transgene expression are among the tools that are being used to optimize and control bone formation in vivo. In this review we have attempted to provide an overview of the main factors that should be considered when utilizing adult stem cells and gene therapy strategies to regenerate bone defects or to promote new bone formation in vivo.

Localized viral vector delivery to enhance in situ regenerative gene therapy

A lyophilization method was developed to locally release adenoviral vectors directly from biomaterials for in situ regenerative gene therapy. Adenovirus expressing a beta-galactosidase reporter gene (AdLacZ) was mixed with different excipient formulations and lyophilized on hydroxyapatite (HA) disks followed by fibroblasts culturing and 5-bromo-4-chloro-3-indolyl-beta-D-galactopyranoside (X-gal) staining, suggesting 1 M sucrose in phosphate-buffered saline had best viability. Adenovirus release studies showed that greater than 30% virus remained on the material surface up to 16 h. Lyophilized adenovirus could be precisely localized in defined patterns and the transduction efficiency was also improved. To determine if the lyophilization formulations could preserve viral bioactivity, the lyophilized AdLacZ was tested after being stored at varying temperatures. Bioactivity of adenovirus lyophilized on HA was maintained for greater than 6 months when stored at -80 degrees C. In vivo studies were performed using an adenovirus encoding BMP-2 (AdBMP-2). AdBMP-2 was lyophilized in gelatin sponges and placed into rat critical-size calvarial defects for 5 weeks. Micro-computed tomography (micro-CT) analysis demonstrated that free-form delivery of AdBMP-2 had only modest effects on bone formation. In contrast, AdBMP-2 lyophilized in gelatin sponges led to more than 80% regeneration of critical-size calvarial defects.

Use of growth factors to modify osteoinductivity of demineralized bone allografts: lessons for tissue engineering of bone

Biologically active bone graft substitute materials are needed for repair and regeneration of skeletal tissues. Current approaches are focused on the use of osteoinductive agents, including bone morphogenetic proteins (BMP) in combination with biodegradable carriers. Demineralized freeze-dried bone allograft (DFDBA) can provide an osteoconductive surface and, at the same time, function as a time-release carrier for BMP. Donor variability, however, limits the predictability of DFDBA as an osteoinductive material. This article examines the use of growth factors, including platelet-rich plasma, platelet-derived growth factor, enamel matrix derivatives, and BMP-2, to enhance the osteoinductive properties of human DFDBA.