Dynamic contact mechanics of the medial meniscus as a function of radial tear, repair, and partial meniscectomy

Short-term outcomes of 43 dogs treated with arthroscopic suturing for meniscal tears associated with cranial cruciate ligament disease

OBJECTIVE

To describe short-term outcomes and complications in dogs receiving meniscal suturing and concurrent tibial plateau leveling osteotomy (TPLO) with or without augmentation with an extracapsular suture.

STUDY DESIGN

Retrospective case series.

ANIMALS

Forty-three client-owned dogs submitted for cruciate ligament disease.

METHODS

Dogs were included if meniscal suturing was performed during or after a TPLO procedure. Criteria included an unstable medial meniscus without evidence of a tear, a caudal vertical longitudinal tear with or without displacement, or if a bucket-handle tear was debrided and the remaining rim was unstable. Stifle stabilization was performed by either a standard TPLO or an augmented TPLO (TPLO + internal brace [IB]). Outcome measures included physical examination findings, radiographs, subjective gait examination, Liverpool Osteoarthritis in Dogs (LOAD) scores, and second-look arthroscopy.

RESULTS

Forty-four meniscal repairs were performed in 43 dogs. Five types of meniscal tears were treated employing eight suture materials. Complications were documented in 15 cases (34%). The stabilization technique had a significant impact on the outcome (p = .049): TPLO + IB had a 93.3% success rate and the success rate was 71.4% in the TPLO-only group.

CONCLUSION

Five types of meniscal pathology were addressed successfully in the study, indicating that currently accepted criteria for meniscal suturing in dogs may be overly conservative. The majority of complications were not related to the meniscal suturing itself and did not compromise the outcome. The stifle stabilization technique had an impact on outcome.

CLINICAL SIGNIFICANCE

The authors found arthroscopic meniscal suturing to be practical and successful in this patient population. Postoperative stifle stability had an impact on successful treatment.

An ovine knee simulator: description and proof of concept

Aims

The ovine stifle is an established model for evaluation of knee treatments, such as meniscus replacement. This study introduces a novel ovine gait simulator for pre-testing of surgical treatments prior to in vivo animal trials. Furthermore, we describe a pilot study that assessed gait kinematics and contact pressures of native ovine stifle joints and those implanted with a novel fiber-matrix reinforced polyvinyl alcohol-polyethylene glycol (PVA-PEG) hydrogel meniscus to illustrate the efficacy of the simulator.

Methods

The gait simulator controlled femoral flexion-extension and applied a 980N axial contact force to the distal tibia, whose movement was guided by the natural ligaments. Five right ovine stifle joints were implanted with a PVA-PEG total medial meniscus replacement, fixed to the tibia via transosseous tunnels and interference screws. Six intact and five implanted right ovine stifle joints were tested for 500 k gait cycles at 1.55 Hz. Implanted stifle joint contact pressures and kinematics in the simulator were compared to the intact group. Contact pressures were measured at 55° flexion using pressure sensitive film inserted sub-meniscally. 3D kinematics were measured optically across two 30-s captures.

Results

Peak contact pressures in intact stifles were 3.6 ± 1.0 MPa and 6.0 ± 2.1 MPa in the medial and lateral condyles (p < 0.05) and did not differ significantly from previous studies (p > 0.4). Medial peak implanted pressures were 4.3 ± 2.2 MPa (p > 0.4 versus intact), while lateral peak pressures (9.4 ± 0.8 MPa) were raised post medial compartment implantation (p < 0.01). The range of motion for intact joints was flexion/extension 37° ± 1°, varus/valgus 1° ± 1°, external/internal rotation 5° ± 3°, lateral/medial translation 2 ± 1 mm, anterior/posterior translation 3 ± 1 mm and distraction/compression 1 ± 1 mm. Ovine joint kinematics in the simulator did not differ significantly from published in vivo data for the intact group, and the intact and implanted groups were comparable (p > 0.01), except for in distraction-compression (p < 0.01).

Conclusion

These findings show correspondence of the ovine simulator kinematics with in vivo gait parameters. The efficacy of the simulator to evaluate novel treatments was demonstrated by implanting a PVA-PEG hydrogel medial meniscal replacement, which restored the medial peak contact pressures but not lateral. This novel simulator may enable future work on the development of surgical procedures, derisking subsequent work in live animals.

How To Avoid Suture Damage in Simultaneous Anterior Cruciate Ligament Reconstruction and Lateral Meniscal Posterior Root Reinsertion With the Transtibial Pullout Technique: A Technical Note

Lateral meniscus posterior root tears (LMPRTs) are estimated to occur in 7% to 12% of anterior cruciate ligament (ACL)-injured knees. This topic is of great interest because of their biomechanical consequences in terms of interruption of hoop stress distribution. If left unrepaired, the corresponding compartment is exposed to unfavorable contact dynamics, similar to those resulting from a total meniscectomy. This Technical Note describes a transtibial LMPRT repair using a Knee Scorpion and an 18-gauge spinal needle. It is a reproducible arthroscopic LMPR reinsertion technique combined with concomitant standard ACL + anterolateral ligament reconstruction with hamstring tendons and it describes how to safely avoid damage to root traction sutures during the ACL independent tibial tunnel drilling.

Biomechanical effects of typical lower limb movements of Chen-style Tai Chi on knee joint

The load and stress distribution on cartilage and meniscus of the knee joint in typical lower limb movements of Chen-style Tai Chi (TC) and deep squat (DS) were analyzed using finite element (FE) analysis. The loadings for this analysis consisted of muscle forces and ground reaction force (GRF), which were calculated through the inverse dynamic approach based on kinematics and force plate measurements obtained from motion capture experiments. Thirteen experienced practitioners performed four typical TC movements, namely, single whip (SW), brush knee and twist step (BKTS), stretch down (SD), and part the wild horse's mane (PWHM), which exhibit lower posture and greater lower limb force compared to other TC styles. The results indicated that TC required greater lower limb muscle strength than DS, resulting in greater knee joint forces. The stress on the medial cartilage in SW and BKTS fell within a range conductive to maintaining the balance between anabolism and catabolism of cartilage matrix. This was due to the fact that SW and BKTS reduce the medial to total tibiofemoral contact force ratios through knee abduction, which may effectively alleviate mild medial knee osteoarthritis (KOA). However, the greater medial contact force ratios observed in SD and PWHM resulted in great contact stresses that may aggravate the pain of patients with KOA. To mitigate these effects, practitioners should consider elevating their postures appropriately to reduce knee flexion angles, especially during the single-leg support phase. This adjustment can decrease the required muscle strength, load and stress on the knee joint.

Silk Fibroin/Wool Keratin Composite Scaffold with Hierarchical Fibrous and Porous Structure

The present study describes a silk microfiber reinforced meniscus scaffold (SMRMS) with hierarchical fibrous and porous structure made from silk fibroin (SF) and wool keratin (WK) using electrospinning and freeze-drying technology. This study focuses on the morphology, secondary structure, mechanical properties, and water absorption properties of the scaffold. The cytotoxicity and biocompatibility of SMRMS are assessed in vivo and in vitro. The scaffold shows hierarchical fibrous and porous structure, hierarchical pore size distribution (ranges from 50 to 650 µm), robust mechanical properties (compression strength can reach at 2.8 MPa), and stable biodegradability. A positive growth condition revealed by in vitro cytotoxicity testing indicates that the scaffold is not hazardous to cells. In vivo assessments of biocompatibility reveal that only a mild inflammatory reaction is present in implanted rat tissue. Meniscal scaffold made of SF/WK composite shows a potential application prospect in the meniscal repair engineering field with its development.

Comparison of constitutive models for meniscus and their effect on the knee joint biomechanics during gait

Mechanical behavior of meniscus can be modeled using constitutive material models of varying complexity, such as isotropic elastic or fibril reinforced poroelastic (FRPE). However, the FRPE material is complex to implement, computationally demanding in 3D geometries, and simulation is time-consuming. Hence, we aimed to quantify the most suitable and efficient constitutive model of meniscus for simulation of cartilage responses in the knee joint during walking. We showed that simpler constitutive material models can reproduce similar cartilage responses to a knee model with the FRPE meniscus, but only knee models that consider orthotropic elastic meniscus can also reproduce meniscus responses adequately.

Securing the Root: Meniscus Root Repair with Rip Stop and Cannulated Drilling

Meniscal root pathology has garnered increased attention over the past decade. Meniscal root tears are considered to essentially represent a meniscus-deficient state, which has led to a rise in the surgical fixation of this pathology. Meniscus root tears are classified as either radial tears within 1 cm of the root insertion, or a direct avulsion of meniscal root. These injuries are important to recognize because they contribute to impaired joint mechanics and rapid articular cartilage degeneration. Given this, there remains significant interest in identifying novel surgical techniques that may facilitate better surgical repair and enhance patient outcomes. The purpose of this technical note is to describe a surgical technique for a medial meniscus root ripstop repair with cannulated drilling. This technique is simple and reproducible, while also allowing for the augmentation of potentially poor tissue quality.

Finite element analysis of the knee joint stress after partial meniscectomy for meniscus horizontal cleavage tears

OBJECTIVE

To establish a finite element model of meniscus horizontal cleavage and partial resection, to simulate the mechanical changes of knee joint under 4 flexion angles, and to explore what is the optimal surgical plan.

METHODS

We used Mimics Research, Geomagic Wrap, and SolidWorks computer software to reconstruct the 3D model of the knee joint, and then produced the horizontal cleavage tears model of the internal and lateral meniscus, the suture model, and the partial meniscectomy model. These models were assembled into a complete knee joint in SolidWorks software, and corresponding loads and boundary constraints were added to these models in ANSYS software to simulate the changing trend of pressure and shear force on femoral condylar cartilage, meniscus, and tibial cartilage under the flexion angles of 0°, 10°, 20°, 30° and 40° of the knee joint. At the same time, the difference of force area between medial interventricular and lateral interventricular of knee joint under four states of bending the knee was compared, to explore the different effects of different surgical methods on knee joint after horizontal meniscus tear.

RESULTS

Within the four medial meniscus injury models, the lowest peak internal pressure and shear force of the knee joint was observed in the meniscal suture model; the highest values were found in the bilateral leaflet resection model and the inferior leaflet resection model; the changes of pressure, shear force and stress area in the superior leaflet resection model were the most similar to the changes of the knee model with the meniscal suture model.

CONCLUSION

Suture repair is the best way to maintain the force relationship in the knee joint. However, resection of the superior leaflet of the meniscus is also a reliable choice when suture repair is difficult.

Acute Repair of Meniscus Root Tear Partially Restores Joint Displacements as Measured With Magnetic Resonance Images and Loading in a Cadaveric Porcine Knee

The meniscus serves important load-bearing functions and protects the underlying articular cartilage. Unfortunately, meniscus tears are common and impair the ability of the meniscus to distribute loads, increasing the risk of developing osteoarthritis. Therefore, surgical repair of the meniscus is a frequently performed procedure; however, repair does not always prevent osteoarthritis. This is hypothesized to be due to altered joint loading post-injury and repair, where the functional deficit of the meniscus prevents it from performing its role of distributing forces. The objective of this study was to quantify joint kinematics in an intact joint, after a meniscus root tear, and after suture repair in cadaveric porcine knees, a frequently used in vivo model. We utilized an magnetic resonance images-compatible loading device and novel use of a T1 vibe sequence to measure meniscus and femur displacements under physiological axial loads. We found that anterior root tear led to large meniscus displacements under physiological axial loading and that suture anchor repair reduced these displacements but did not fully restore intact joint kinematics. After tear and repair, the anterior region of the meniscus moved posteriorly and medially as it was forced out of the joint space under loading, while the posterior region had small displacements as the posterior attachment acted as a hinge about which the meniscus pivoted in the axial plane. Methods from this study can be applied to assess altered joint kinematics following human knee injuries and evaluate repair strategies aimed to restore joint kinematics.

Biomechanical effects of the medial meniscus horizontal tear and the resection strategy on the rabbit knee joint under resting state: finite element analysis

The biomechanical changes following meniscal tears and surgery could lead to or accelerate the occurrence of osteoarthritis. The aim of this study was to investigate the biomechanical effects of horizontal meniscal tears and different resection strategies on a rabbit knee joint by finite element analysis and to provide reference for animal experiments and clinical research. Magnetic resonance images of a male rabbit knee joint were used to establish a finite element model with intact menisci under resting state. A medial meniscal horizontal tear was set involving 2/3 width of a meniscus. Seven models were finally established, including intact medial meniscus (IMM), horizontal tear of the medial meniscus (HTMM), superior leaf partial meniscectomy (SLPM), inferior leaf partial meniscectomy (ILPM), double-leaf partial meniscectomy (DLPM), subtotal meniscectomy (STM), and total meniscectomy (TTM). The axial load transmitted from femoral cartilage to menisci and tibial cartilage, the maximum von Mises stress and the maximum contact pressure on the menisci and cartilages, the contact area between cartilage to menisci and cartilage to cartilage, and absolute value of the meniscal displacement were analyzed and evaluated. The results showed that the HTMM had little effect on the medial tibial cartilage. After the HTMM, the axial load, maximum von Mises stress and maximum contact pressure on the medial tibial cartilage increased 1.6%, 1.2%, and 1.4%, compared with the IMM. Among different meniscectomy strategies, the axial load and the maximum von Mises stress on the medial menisci varied greatly. After the HTMM, SLPM, ILPM, DLPM, and STM, the axial load on medial menisci decreased 11.4%, 42.2%, 35.4% 48.7%, and 97.0%, respectively; the maximum von Mises stress on medial menisci increased 53.9%, 62.6%, 156.5%, and 65.5%, respectively, and the STM decreased 57.8%, compared to IMM. The radial displacement of the middle body of the medial meniscal was larger than any other part in all the models. The HTMM led to few biomechanical changes in the rabbit knee joint. The SLPM showed minimal effect on joint stress among all resection strategies. It is recommended to preserve the posterior root and the remaining peripheral edge of the meniscus during surgery for an HTMM.

Fibrin clot and Leukocyte-rich platelet-rich fibrin show similar release kinetics and amount of growth factors: a pilot study

BACKGROUND

In knee arthroscopic surgery, fibrin clot (FC) and leukocyte-rich platelet-rich fibrin (L-PRF) may be used in augmentation for meniscal repair. Studies have investigated growth factors released from FC and L-PRF; however, it is difficult to compare FC and L-PRF between different studies. Direct comparison of growth factors that may support meniscal healing released from FC and L-PRF may be beneficial in deciding whether to use FC or L-PRF. If no significant difference is seen, the surgeon may decide to use FC which is easier to prepare compared to L-PRF. The purpose of this pilot study is to investigate the release amount and pattern of basic fibroblast growth factor (bFGF), platelet-derived growth factor AB (PDGF-AB), transforming growth factor β1 (TGF-β1), vascular endothelial growth factor (VEGF), and stromal cell-derived factor 1 (SDF-1) from FC and L-PRF.

METHOD

Twenty milliliters (ml) of whole blood was collected from each of the four volunteers. Ten milliliters of whole blood was allocated for preparation of FC and 10 ml for L-PRF. FC and L-PRF were separately placed in 5 ml of culture media. Five milliliters of the culture media was sampled and refilled at 15 min, 1 day, 3 days, 1 week and 2 weeks. The collected culture was used to quantify bFGF, PDGF-AB, TGF-β1, VEGF, and SDF-1 release by Enzyme-linked immune-sorbent assay (ELISA). Mann-Whitney U test was performed to assess significance of differences in amount of each growth factor released between FC and L-PRF. Significance was accepted at P value less than 0.05.

RESULTS

At two weeks, the cumulative release of TGF-β1 was the highest among all the growth factors in both FC and L-PRF (FC:19,738.21 pg/ml, L-PRF: 16,229.79 pg/ml). PDGF-AB (FC: 2328 pg/ml, L-PRF 1513.57 pg/ml) had the second largest amount, followed by VEGF (FC: 702.06 pg/ml, L-PRF 595.99 pg/ml) and bFGF (FC: 23.48 pg/ml, L-PRF 18.2 pg/ml), which order was also common in both FC and L-PRF. No significant difference in final release amount and pattern was seen between FC and L-PRF.

CONCLUSION

The current pilot study showed that cumulative release amount and release pattern of PDGF-AB, VEGF, TGF-β1, and bFGF did not significantly differ between FC and L-PRF during the two weeks of observation.

Editorial Commentary: High Tibial Osteotomy May Not Be Required With Medial Meniscus Root Repair

Meniscal root tears are defined as tears within 10 mm of their attachment and are more commonly observed in middle-aged patients. They have been named the silent epidemic and are equivalent to a total meniscectomy. Basic science studies have shown that posterior meniscus root repairs restore both contact area and pressure to its native state. The role of an additional high tibial osteotomy is not clear yet. High tibial osteotomies are commonly used to correct varus malalignment, a condition that is often observed with these tears. However, an additional osteotomy does not seem to offer any additional clinical benefits with regards to clinical and radiologic outcomes. It also has no effect with regards to contact pressure and contact area and is not related to the degree of deformity correction.

Acute repair of meniscus root tear partially restores joint displacements as measured with MRI and loading in a porcine knee

The meniscus serves important load-bearing functions and protects the underlying articular cartilage. Unfortunately, meniscus tears are common and impair the ability of the meniscus to distribute loads, greatly increasing the risk for developing osteoarthritis. Therefore, surgical repair of the meniscus is a frequently performed procedure; however, this repair does not always prevent osteoarthritis. This is hypothesized to be due to altered joint loading post injury and repair, where the functional deficit of the meniscus prevents it from performing its role of distributing forces. However, many studies of meniscus function required opening the joint, which alters kinematics. The objective of this study was to use novel MRI methods to image the intact joint under axial load and measure the acute meniscus and femur displacements in an intact joint, after a meniscus root tear, and after suture repair in the porcine knee, a frequently used in vivo model. We found that anterior root tear led to large meniscus and femur displacements under physiological axial loading, and that suture anchor repair reduced these displacements, but did not fully restore intact joint kinematics. After tear and repair, the anterior region of the meniscus moved posteriorly and medially as it was forced out of the joint space under loading, while the posterior region had small displacements as the posterior attachment acted as a hinge about which the meniscus rotated in the axial plane. This technique can be applied to evaluate the effect of knee injuries and to develop improved repair strategies to restore joint kinematics.

The Interplay of Biomechanical and Biological Changes Following Meniscus Injury

PURPOSE OF REVIEW

Meniscus injury often leads to joint degeneration and post-traumatic osteoarthritis (PTOA) development. Therefore, the purpose of this review is to outline the current understanding of biomechanical and biological repercussions following meniscus injury and how these changes impact meniscus repair and PTOA development. Moreover, we identify key gaps in knowledge that must be further investigated to improve meniscus healing and prevent PTOA.

RECENT FINDINGS

Following meniscus injury, both biomechanical and biological alterations frequently occur in multiple tissues in the joint. Biomechanically, meniscus tears compromise the ability of the meniscus to transfer load in the joint, making the cartilage more vulnerable to increased strain. Biologically, the post-injury environment is often characterized by an increase in pro-inflammatory cytokines, catabolic enzymes, and immune cells. These multi-faceted changes have a significant interplay and result in an environment that opposes tissue repair and contributes to PTOA development. Additionally, degenerative changes associated with OA may cause a feedback cycle, negatively impacting the healing capacity of the meniscus. Strides have been made towards understanding post-injury biological and biomechanical changes in the joint, their interplay, and how they affect healing and PTOA development. However, in order to improve clinical treatments to promote meniscus healing and prevent PTOA development, there is an urgent need to understand the physiologic changes in the joint following injury. In particular, work is needed on the in vivo characterization of the temporal biomechanical and biological changes that occur in patients following meniscus injury and how these changes contribute to PTOA development.

Femoral-tibial contact stresses on fixed rotational femur models

Objectives

This study aims to quantitatively evaluate the femoral-tibial contact pressure on the knee under certain malrotaional degrees.

Methods

Femoral-tibial contact pressure was carried out on 14 fixed rotational knee models under 200/400/600 N vertical load using ultra-low-pressure sensitive film technology, rotation angles including neutral position (0°, anatomically reduced), 5°, 10°, and 15° internally and externally. Data were collected and analyzed with SPSS software.

Results

There are significant statistical differences between the medial contact pressure among rotational deformities (including neutral position) (P < 0.01), the increase in the degree of fixed internal malrotation of the femur resulted in a linear increase in the medial femoral-tibial contact pressures (P < 0.05) under 200/400/600 N vertical load, while increase in the degree of fixed external malrotation resulted in a linear decrease (P < 0.05). Except the 200 N compression, we can't find significant differences in lateral contact pressures (P > 0.05). In the comparison of medial to lateral contact pressures, no statistically significant differences were found in neutral and 5° internal rotation under 200/400 N, neutral, 5° internal rotation, and 15° external rotation under 600 N. In contrast, medial contact pressures were higher than lateral at other angles (P < 0.05).

Conclusion

Obvious contact pressure changes were observed in rotatory femur. Doctors should detect rotational deformity as much as possible during operation and perform anatomical reduction. For patients with residual rotational deformities, indication of osteotomy should not be too broad.

Importance of posterior tibial slope in joint kinematics with an anterior cruciate ligament-deficient knee

Aims

To fully quantify the effect of posterior tibial slope (PTS) angles on joint kinematics and contact mechanics of intact and anterior cruciate ligament-deficient (ACLD) knees during the gait cycle.

Methods

In this controlled laboratory study, we developed an original multiscale subject-specific finite element musculoskeletal framework model and integrated it with the tibiofemoral and patellofemoral joints with high-fidelity joint motion representations, to investigate the effects of 2.5° increases in PTS angles on joint dynamics and contact mechanics during the gait cycle.

Results

The ACL tensile force in the intact knee was significantly affected with increasing PTS angle. Considerable differences were observed in kinematics and initial posterior femoral translation between the intact and ACLD joints as the PTS angles increased by more than 2.5° (beyond 11.4°). Additionally, a higher contact stress was detected in the peripheral posterior horn areas of the menisci with increasing PTS angle during the gait cycle. The maximum tensile force on the horn of the medial meniscus increased from 73.9 N to 172.4 N in the ACLD joint with increasing PTS angles.

Conclusion

Knee joint instability and larger loading on the medial meniscus were found on the ACLD knee even at a 2.5° increase in PTS angle (larger than 11.4°). Our biomechanical findings support recent clinical evidence of a high risk of failure of ACL reconstruction with steeper PTS and the necessity of ACL reconstruction, which would prevent meniscus tear and thus the development or progression of osteoarthritis.

Cite this article: Bone Joint Res 2022;11(10):739–750.

Biomechanical effects of medial meniscus radial tears on the knee joint during gait: A concurrent finite element musculoskeletal framework investigation

The biomechanical variation in the knee during walking that accompanies medial meniscal radial tears stemming from knee osteoarthritis (OA) has not been explored. This study introduced a finite element musculoskeletal model using concurrent lower limb musculoskeletal dynamics and knee joint finite element analysis in a single framework and expanded the models to include knees with medial meniscal radial tears and total medial meniscectomy. The radial tears involved three locations: anterior horn, midbody, and posterior horn with grades of 33%, 50%, and 83% of the meniscus width. The shear and hoop stresses of the tear meniscus and tibial cartilage contact load, accompanying tears, and postmeniscectomy were evaluated during the stance phase of the gait cycle using the models. In the 83% width midbody tear group, shear stress at the end of the tear was significantly greater than in the intact meniscus and other tear groups, and the maximum shear stress was increased by 310% compared to the intact meniscus. A medial meniscus radial tear has a much smaller effect on the tibial cartilage load (even though in the 83% width tear, the cartilage/total load ratio increased by only 9%). However, the contact force on the tibial cartilage with total postmeniscectomy was increased by 178.93% compared with a healthy intact meniscus, and the peak contact pressure after meniscectomy increased from 11.94 to 12.45 MPa to 17.64 and 13.76 MPa, at the maximum weight acceptance and push-off, respectively. Our study shows that radial tears with larger medial meniscus widths are prone to high stress concentrations at the end of the tears, leading to the potential risk of complete meniscal rupture. Furthermore, although the tears did not change the cartilage load distribution, they disrupted the circumferential stress-transmitting function of the meniscus, thus greatly increasing the likelihood of the onset of knee OA. The significant increase in the tibial cartilage load with total postmeniscectomy indicates a potential risk of OA flare-ups. This study contributes to a better understanding of meniscal tear-induced OA biomechanical changes during human activities and offers some potential directions for surgical guidance of meniscectomies and the prophylaxis and treatment of OA.

Knee adduction moment is correlated with the increase in medial meniscus extrusion by dynamic ultrasound in knee osteoarthritis

BACKGROUND

An increase in medial meniscus extrusion (MME) due to abnormal biomechanical stress leads to knee osteoarthritis (OA) progression. MME evaluation during walking is a key method of detecting dynamic changes in the meniscus, and in combination with motion analysis, can provide a deeper understanding of the mechanisms involved in the increase of MME.

OBJECTIVE

To validate the feasibility of MME dynamic evaluation in combination with a motion analysis system based on the correlation between the increase in MME and biomechanical factors.

METHODS

Twenty-three knees from 23 patients with mild to moderate knee OA were analysed in this study. The medial meniscus during walking was evaluated by ultrasound. The increase in MME was calculated as the difference between the minimum and maximum MME during walking. A three-dimensional motion analysis system was synchronised with the ultrasound and then, biomechanical factors such as knee moment and ground reaction force were evaluated.

RESULTS

The wave patterns of the mediolateral and vertical components of ground reaction forces and knee adduction moment were similar to those in the MME based on a high cross-correlation coefficient (>0.8). The increase in MME was significantly correlated with the peak value of the knee adduction moment (r = 0.54, P = 0.0073) but not with the mediolateral and vertical components of the ground reaction force.

CONCLUSION

The findings show that knee adduction moment is correlated with an increase in MME during walking and indicates the validity and feasibility of the dynamic evaluation of MME in combination with a motion analysis system.

Time course and localization of nerve growth factor expression and sensory nerve growth during progression of knee osteoarthritis in rats

OBJECTIVES

Nerve growth factor (NGF) and sensory nerves are key factors in established osteoarthritis (OA) knee pain. We investigated the time course of NGF expression and sensory nerve growth across early and late stages of OA progression in rat knees.

DESIGN

Knee OA was induced by medial meniscectomy in rats. OA histopathology, NGF expression, and calcitonin gene-related peptide immunoreactive (CGRP-IR) nerves were quantified pre-surgery and post-surgery at weeks 1, 2, 4 and 6. Pain-related behavior was evaluated using dynamic weight distribution and mechanical sensitivity of the hind paw.

RESULTS

NGF expression in chondrocytes increased from week 1 and remained elevated until the advanced stage. In synovium, NGF expression increased only in early stages, whereas in osteochondral channels and bone marrow, NGF expression increased in the later stages of OA progression. CGRP-IR nerve density in suprapatellar pouch peaked at week 4 and decreased at week 6, whereas in osteochondral channels and bone marrow, CGRP-IR innervation increased through week 6. Percent ipsilateral weight-bearing decreased throughout the OA time course, whereas reduced paw withdrawal thresholds were observed only in later stages.

CONCLUSION

During progression of knee OA, time-dependent alterations of NGF expression and CGRP-IR sensory innervation are knee tissue specific. NGF expression increased in early stages and decreased in advanced stage in the synovium but continued to increase in osteochondral channels and bone marrow. Increases in CGRP- IR sensory innervation followed increases in NGF expression, implicating that NGF is a key driver of articular nerve growth associated with OA pain.

An anatomically shaped medial meniscus prosthesis is able to partially restore the contact mechanics of the meniscectomized knee joint

Purpose

The aim of this study was to determine whether a flexible medial meniscus prosthesis is more capable of sharing loads with the direct tibiofemoral cartilage contact than the stiffer first-generation prosthesis. Additionally, the effect of the prosthesis on the tibial pressure distribution after total meniscectomy was investigated.

Methods

In an artificial knee joint, the relative amounts of load transferred through both meniscus prostheses and the direct tibiofemoral contact were assessed with pressure-sensitive sensors.

Additionally, six cadaveric knee joints were loaded in a physiological environment. Tibial contact pressures were measured with an intact native meniscus, after total meniscectomy and after implantation of the second-generation meniscus prosthesis.

Results

Whereas the first generation of the meniscus prosthesis transferred virtually all the load from femur to tibia, the second-generation prosthesis allowed for load sharing with the direct tibiofemoral contact.

No differences in load sharing were found between the native meniscus and the second-generation meniscus prosthesis. The prosthesis decreased peak and mean pressures on the medial tibial cartilage compared to meniscectomy. No significant differences in pressure were found between the native meniscus and the meniscus prosthesis.

Conclusions

The second-generation meniscus prosthesis presented in this study can share loads with the direct tibiofemoral contact, a characteristic that the first-generation prosthesis did not have.

The flexible meniscus prosthesis significantly reduces the contact pressures on the medial tibial plateau after total meniscectomy. Although the biomechanical performance of the native meniscus could not be reproduced completely, the meniscus prosthesis may have the potential to relieve post-meniscectomy pain symptoms.

Review of Meniscus Anatomy and Biomechanics

PURPOSE OF REVIEW

Anatomic repair of meniscal pathology is critical for restoring native joint biomechanics and kinematics for patients who suffer from meniscal tears. The purpose of this review was to summarize the pertinent anatomy, biomechanics, and kinematics of the meniscus to guide surgeons during meniscal repair procedures.

RECENT FINDINGS

Over the past decade, there has been a growing trend to save the meniscus whenever possible. The goal of repair should be to recreate native anatomy as close as possible to recapitulate normal mechanics. Studies describing the quantitative and qualitative relationship of the meniscus roots, ligaments, and attachments are key in guiding any meniscus repair. This review summarizes these relationships, with particular emphasis on meniscal roots and other key attachments to the meniscus. The composition, embryology, vascularization, biomechanics, in vivo kinetics, and in vivo kinematics of the meniscus are also discussed in this review. Meniscal tears can cause profound functional, biomechanical, and kinematic derangements within the knee joint leading to accelerated degeneration of the articular cartilage. A strong understanding of the quantitative and qualitative relationships of the meniscus and its attachments with key arthroscopic landmarks will allow a surgeon to anatomically repair meniscal pathology in order to restore native joint biomechanics.

Several Techniques Exist With Favorable Biomechanical Outcomes in Radial Meniscus Tear Repair-A Systematic Review

PURPOSE

To compare biomechanical properties of various radial tear repair techniques in the medial and lateral menisci.

METHODS

A search was performed for key words regarding mechanical properties of repair of radial meniscal tears in PubMed, Embase, CINAHL, Scopus, and Cochrane databases, yielding 1791 articles. Articles were screened using Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines against inclusion criteria and underwent Methodological Index for Non-Randomized Studies (MINORS) methodologic quality assessment. Repair constructs evaluated were classified based on repair technique, use of a transtibial augmentation, and the number, orientation, and pattern of stitches. Results published across different studies were compared but not subjected to meta-analysis due to variability in testing procedures and heterogeneity of repair methods.

RESULTS

We identified 20 studies that performed mechanical testing on 21 different radial meniscal tear repair techniques. The greatest reported mean load-to-failure (LtF) were the transtibial 2-tunnel + 4 horizontal inside-out sutures (191.2 N ± 17.3, cadaver) and all-inside double vertical repair (146.3 N ± 36.2, porcine). The transtibial technique improved LtF and displacement of an inside-out (IO) horizontal repair. All-inside vertical repairs demonstrated greater LtF, stiffness, and displacement compared with IO horizontal repairs in 2 studies. Compared with IO double horizontal repairs, all-inside double vertical or IO double horizontal repairs with reinforcing stitches parallel to the tear exhibited greater LtF in 3 studies and stiffness in 2 studies. Two studies reported that parallel reinforcing stitches significantly reduced suture tear-through compared with similar, nonreinforced repairs. Mean MINORS score for all studies analyzed was 19.88 ± 1.47 points.

CONCLUSIONS

A systematic review demonstrated that there may be alternatives to traditional IO horizontal repairs for radial meniscus tears. Less-invasive all-inside vertical techniques reinforced with suture parallel to the tear instead of standard IO horizontal sutures may improve strength of repair. In addition, transtibial 2-tunnel augmentation may also increase strength of radial meniscus tear repairs.

CLINICAL RELEVANCE

There may be alternatives to IO horizontal repairs for radial meniscus tears.

Time to Achieving Clinically Significant Outcomes After Meniscal Allograft Transplantation

PURPOSE

To determine the time to achieving minimal clinically important difference (MCID) and patient acceptable symptomatic state (PASS) for commonly administered patient-reported outcome (PRO) measures and risk factors affecting achievement of clinically significant outcomes in patients undergoing meniscal allograft transplantation (MAT).

METHODS

A prospectively maintained MAT registry was retrospectively reviewed from April 2014 to May 2019. Patients who underwent revision MAT or did not complete preoperative PROs or one post operative time point were excluded. Patients who underwent concomitant procedures were included in the analysis. PROs were administered preoperatively and at 6 months, 1 year, and 2 years postoperatively. Previously defined MCID and PASS thresholds were utilized and Kaplan-Meier survival curve analysis with interval censoring was used to calculate the cumulative percentages of MCID and PASS achievement at each follow-up time interval (5-7, 11-13, and 23-25 months).

RESULTS

Eighty patients (age: 28.35 ± 9.76, 50% male) who completed preoperative, 6-month (n = 69, 86% compliance), and 1-year (n = 76, 95% compliance) PROs were included. The majority of patients (>50%) achieved MCID and PASS on most included PROs. Workers' compensation status was found to significantly delay achievement of MCID and PASS on all PROs except for PASS on Knee Injury and Osteoarthritis Outcome Score (KOOS) quality of life (QoL). Higher body mass index (BMI) significantly delayed time to achieving MCID on KOOS Pain and activities of daily living (ADL), as well as PASS on KOOS Symptoms and KOOS QoL.

CONCLUSION

This study suggests that the majority of patients have clinically significant improvements in pain and function after MAT, with more than 50% of patients experiencing clinically significant improvement within the first postoperative year. Workers' compensation status and high BMI may prolong time to achievement of MCID and PASS after MAT.

Meniscus surface texture is associated with degenerative changes in biological and biomechanical properties

Meniscal degeneration is defined by semi-quantitative assessment of multiple histological findings and has been implicated in biomechanical dysfunction, yet little is known about its relationship with biological properties. This paper aimed to quantitatively evaluate degenerative findings in human meniscus to examine their relationship with gene expression and biomechanical properties, and to extract histological findings that reflect biological properties like gene expression and cytokine secretion. This study included lateral menisci of 29 patients who underwent total knee arthroplasty. The menisci were divided into six samples. For each sample, Pauli's histological evaluation and corresponding quantitative assessment (surface roughness, DNA content, collagen orientation, and GAG content) were performed, with surface roughness showing the highest correlation with the histological evaluation in a single correlation analysis (r = 0.66, p < 0.0001) and multivariate analysis (p < 0.0001). Furthermore, surface roughness was associated with gene expression related to meniscal degeneration and with tangent modulus which decreases with increasing degeneration (r = - 0.49, p = 0.0002). When meniscal tissue was classified by surface integrity, inflammatory cytokine secretion tended to be higher in severe degenerated menisci. These results suggest that the evaluation of meniscal surface texture could predict the degree of degeneration and inflammatory cytokine secretion.

Increased Joint Space Narrowing After Arthroscopic Partial Meniscectomy: Data From the Osteoarthritis Initiative

BACKGROUND

Arthroscopic partial meniscectomy (APM) is widely performed and remains an important therapeutic option for patients with a meniscal tear. However, it is debated whether or not APM accelerates the progression of osteoarthritis (OA) in the long term.

PURPOSE/HYPOTHESIS

The purpose was to compare the progression of OA measured by the change in tibiofemoral joint space width (JSW)-a quantitative measure of OA radiographic severity-across 3 groups with a midterm follow-up: (1) patients undergoing APM; (2) those with a meniscal tear treated nonoperatively; and (3) those without a tear. We hypothesized that the reduction in JSW would be greatest in patients undergoing APM and least in those patients without a tear.

STUDY DESIGN

Cohort study; Level of evidence, 3.

METHODS

Using the Osteoarthritis Initiative cohort, a total of 144 patients were identified that underwent APM with at least 12 months of follow up and without previous knee surgery. Those with a meniscal tear who did not have APM (n = 144) and those without a tear (n = 144) were matched to patients who had APM by sex, age, Kellgren-Lawrence (KL) grade, and follow up time. Participants underwent magnetic resonance imaging at baseline. Knee radiographs to assess JSW were collected annually or biannually. The change in minimum medial compartment JSW was calculated using a validated automated method. A piecewise linear mixed effects model was constructed to examine the relationship between JSW decline over time and treatment group-adjusting for age, body mass index, smoking status, KL grade, and baseline JSW.

RESULTS

All groups had comparable baseline JSW-ranging from 4.33 mm to 4.38 mm. The APM group had a rate of JSW decline of -0.083 mm/mo in the first 12 months and -0.014 mm/mo between 12 and 72 months. The rate of JSW decline in the APM group was approximately 27 times greater in the first 12 months than that in the nonsurgical group (-0.003 mm/mo) and 5 times greater than that in the no tear group (-0.015 mm/mo); however, there was no significant difference between groups for 12 to 72 months (nonsurgical group: -0.009 mm/mo; no tear group: -0.010 mm/mo). The adjusted JSW in the APM group was 4.38 mm at baseline and decreased to 2.57 mm at 72 months; the JSW in the nonsurgical group declined from 4.31 mm to 3.73 mm, and in the no tear group it declined from 4.33 mm to 3.54 mm. There was a statistically significant difference in JSW change between baseline and 72 months for the APM group compared with the other groups (P < .001), but not between the nonsurgical and no tear groups (P = .12).

CONCLUSION

In the first postoperative year, APM results in a faster rate of joint space narrowing compared with knees undergoing nonsurgical management of meniscal tears. Thereafter, there are comparable rates of OA progression regardless of the chosen management. APM results in a persistent decrease in JSW over at least 72 months. An untreated meniscal tear does not contribute to radiographic progression-assessed by JSW-as compared with an intact meniscus.

Treatment of the syndrome of knee pain and meniscal tear in middle-aged and older persons: A narrative review

Objective:

Design:

Results:

Conclusion:

Radial tears in the anterior third of the lateral meniscus are frequently combined with horizontal tears

INTRODUCTION

Radial tears of the lateral meniscus are often located in the junction of the middle and posterior third or posterior tibial attachment. However, we observed that a few cases of radial tears occurred in the anterior third of the lateral meniscus, and in many cases, they were accompanied by horizontal tears.

HYPOTHESIS

Radial tears are more frequently accompanied by horizontal tears in the anterior third of the lateral meniscus than in other regions.

MATERIAL AND METHODS

From July 2006 to May 2019, patients who underwent arthroscopic surgery for radial tears of the lateral meniscus were included. Patients with radial tears in the anterior third of the lateral meniscus were classified into the anterior group and those with radial tears in the middle and posterior third were classified into the comparison group. Magnetic resonance imaging and arthroscopic findings were reviewed to evaluate whether radial tears were accompanied by other types of tears, especially horizontal tears. The incidence of complex tears between the two groups was compared.

RESULTS

Eighty knees in 79 patients were included. The mean age at the time of surgery was 44.1±16.9 years. The anterior group included 30 knees, and 19 (63.3%) of those also had horizontal tears. In the anterior group, all complex tears were accompanied by horizontal tears, and no other types of accompanying tears were observed. The comparison group included 50 knees, and 16 (32%) of those also had other types of tears. Of the 16 complex tears, 14 had horizontal tears and 2 had longitudinal tears. The incidence of complex tear was significantly higher in the anterior group than in the comparison group (p<.001).

CONCLUSION

Radial tears occurring at the anterior third of the lateral meniscus are frequently accompanied by a horizontal tear. It is important to be aware and predict the occurrence of such characteristic tears and to do proper surgical procedures.

LEVEL OF PROOF

IV; Cross-sectional study.

Tekscan analysis programs (TAP) for quantifying dynamic contact mechanics

This short communication provides details on customized Tekscan Analysis Programs (TAP) which extract comprehensive contact mechanics metrics from piezoelectric sensors in articulating joints across repeated loading cycles. The code provides functionality to identify regions of interest (ROI), compute contact mechanic metrics, and compare contact mechanics across multiple test conditions or knees. Further, the variability of identifying ROIs was quantified between seven different users and compared to an expert. Overall, the contribution of four variables were studied: two knee specimens; two points in the gait cycle; two averaging methods; and seven observers, to determine if variations in these values played a role in accurately quantifying the ROI. The relative error between the force ratio from each observer's ROI and the expert ROI was calculated as the output of interest. A multivariate linear mixed effects model was fit to the four variables for the relative error with an observer- and knee-specific random intercept. Results from the fitted model showed a statistically significant difference at the 0.05 level in the mean relative errors at the two gait points. Additionally, variability in the relative errors attributed to the observer, knee, and random errors was quantified. To reduce variability amongst users, by ensuring low inter-observer variability and increasing segmentation accuracy of knee contact mechanics, a training module and manual have been included as supplemental material. By sharing this code and training manual, we envisage that it can be used and modified to analyze outputs from a range of sensors, joints, and test conditions.

Inside-Out Approach to Meniscus Repair: Still the Gold Standard?

PURPOSE OF REVIEW

The purpose of this review is to provide an up-to-date summary on the current literature and trends regarding use of the inside-out approach to meniscus repair. Additionally, the paper describes the authors preferred techniques for inside-out meniscus repair utilizing posteromedial and posterolateral exposures.

RECENT FINDINGS

There has been a substantial increase in recent publications regarding meniscus repair. However, comparisons regarding the optimal repair technique have not been conclusive. Despite the recent increase in use of all-inside devices, multiple investigations with short-to-mid-term follow-up have demonstrated similar rates of meniscus healing between inside-out and all-inside repair techniques. Similarly, current literature describes comparable failure rates of around 20%. There are variations in the profile of complications, with all-inside devices having more implant-related complications and inside-out techniques with higher neurovascular injuries. Inside-out meniscus repair is a versatile, cost-effective technique that remains the gold standard for management of most meniscus tear patterns. Through a thoughtful approach, efficient suture retrieval and repair can be performed while protecting critical neurovascular structures. All-inside meniscus repair devices have increased in popularity and surgeon access, but this technique is not without limitations and comparisons to inside-out meniscus repair demonstrates equivocal outcomes.

Shock Response of Porcine Meniscus along with Axial and Radial Directions

The meniscus is a multifunctional fibrocartilage tissue in the knee joint which stables joint movement, bears load and absorbs impact. Improper collisions will cause damage to meniscus tissue and lose its original functionality. However, it is difficult to fully evaluate the mechanical properties of the meniscus based on static test results alone. In this study, Split Hopkinson Pressure Bar (SHPB) and hydraulic material testing system (MTS) were utilized to examine the quasi-static and dynamic properties of the porcine meniscus along with two different orientations. The results showed that the meniscus is a strain rate sensitive material and its mechanical properties mainly depend on the orientation of collagen fiber bundles in the peripheral direction. The meniscus tissue did not show obvious yield characteristics under quasi-static test conditions. However, the meniscus showed clear yield behavior under dynamic loading. When the strain rate increased, the elastic modulus of the radial meniscus remained around 35 MPa while the elastic modulus of the axial meniscus increased from 30 MPa to 80 MPa. This study demonstrates that the meniscus is sensitive to strain rate at both dynamic and quasi-static conditions, and the meniscus is an anisotropic biological tissue.

Current concepts on meniscal repairs

The specific meniscus injury pattern were divided into many patterns. Nowadays, the meniscus root injury, radial tear meniscus, bucket handle tear meniscus and Ramp lesion were particularly focused on many way to manage and still controversial a lot of issues. Meniscus root tears (MRTs) and Ramp lesion are the most ignored, or misdiagnosed causes of chronic knee pain. Most patients delayed seeking treatment, consequently resulting in cartilage loss, and leading to the condition progressing to osteoarthritis knee. This has resulted in the rate of MR and Ramp repair increase significantly. The bucket handle meniscus tear trend to strong saving the anatomical meniscus and avoid to menisectomy. This article, on the other hand, will reveal you how to save and secure a nearly native meniscus fixation. In case of the radial meniscus, the partial meniscectomy is still used to treat this type of injury today, but it does not prevent degenerative changes from occurring, which can lead to unfavorable outcomes. Meniscal repair is a popular procedure for treating radial tears as an alternative to surgery. However, this pattern of meniscus tear can be difficult to repair and has a high failure rate, the arthroscopic meniscus repair techniques are published.

Influence of Menisci on Tibiofemoral Contact Mechanics in Human Knees: A Systematic Review

Purpose: Menisci transfer axial loads, while increasing the load-bearing tibiofemoral contact area and decreasing tibiofemoral contact pressure (CP). Numerous clinical and experimental studies agree that an increased CP is one predominant indicator for post-traumatic osteoarthritis (PTOA) of the knee joint. However, due to the immense variability in experimental test setups and wide range of treatment possibilities in meniscus surgery, it is difficult to objectively assess their impact on the CP determination, which is clearly crucial for knee joint health. Therefore, the aim of this systematic review is to investigate the influence of different meniscal injuries and their associated surgical treatments on the CP. Secondly, the influence of different test setups on CP measurements is assessed. On the basis of these results, we established the basis for recommendations for future investigations with the aim to determine CPs under different meniscal states. Methods: This review was conducted in accordance with the PRISMA guidelines. Studies were identified through a systematic literature search in Cochrane, PubMed and Web of Science databases. Literature was searched through pre-defined keywords and medical subject headings. Results: This review indicates a significant increase of up to 235% in peak CP when comparing healthy joints and intact menisci with impaired knee joints, injured or resected menisci. In addition, different test setups were indicated to have major influences on CP: The variety of test setups ranged from standard material testing machines, including customized setups via horizontal and vertical knee joint simulators, through to robotic systems. Differences in applied axial knee joint loads ranged from 0 N up to 2,700 N and resulted unsurprisingly in significantly different peak CPs of between 0.1 and 12.06 MPa. Conclusion: It was shown that untreated traumatic meniscal tears result in an increased CP. Surgical repair intervention were able to restore the CP comparable to the healthy, native condition. Test setup differences and particularly axial joint loading variability also led to major CP differences. In conclusion, when focusing on CP measurements in the knee joint, transparent and traceable in vitro testing conditions are essential to allow researchers to make a direct comparison between future biomechanical investigations.

Biomechanics of the medial meniscus in the osteoarthritic knee joint

Background

Increased mechanical loading and pathological response of joint tissue to the abnormal mechanical stress can cause degradation of cartilage characteristic of knee osteoarthritis (OA). Despite osteoarthritis is risk factor for the development of meniscal lesions the mechanism of degenerative meniscal lesions is still unclear. Therefore, the aim of the study is to investigate the influence of medial compartment knee OA on the stress state and deformation of the medial meniscus.

Methods

The finite element method was used to simulate the stance phase of the gait cycle. An intact knee model was prepared based on magnetic resonance scans of the left knee joint of a healthy volunteer. Degenerative changes in the medial knee OA model were simulated by nonuniform reduction in articular cartilage thickness in specific areas and by a decrease in the material parameters of cartilage and menisci. Two additional models were created to separately evaluate the effect of alterations in articular cartilage geometry and material parameters of the soft tissues on the results. A nonlinear dynamic analysis was performed for standardized knee loads applied to the tibia bone.

Results

The maximum von Mises stress of 26.8 MPa was observed in the posterior part of the medial meniscus body in the OA model. The maximal hoop stress for the first peak of total force was 83% greater in the posterior horn and only 11% greater in the anterior horn of the medial meniscus in the OA model than in the intact model. The reduction in cartilage thickness caused an increase of 57% in medial translation of the medial meniscus body. A decrease in the compressive modulus of menisci resulted in a 2.5-fold greater reduction in the meniscal body width compared to the intact model.

Conclusions

Higher hoop stress levels on the inner edge of the posterior part of the medial meniscus in the OA model than in the intact model are associated with a greater medial translation of the meniscus body and a greater reduction in its width. The considerable increase in hoop stresses shows that medial knee OA may contribute to the initiation of meniscal radial tears.

Development of a Pressure-Sensitive Conductive Rubber Sensor for Analyzing Meniscal Injury in Porcine Models

The assessment of the distribution of contact pressure on the meniscus is important in the elucidation of kinematics, etiology of joint diseases, and establishment of treatment methods. Compared with sensors widely used in recent years, pressure-sensitive conductive rubber sensors are easy to mold, flexible, durable, and resistant to shearing forces. This study is aimed at developing a rubber sensor for meniscal research and evaluating the pressure distribution after meniscal injury using porcine models. After confirming the reliability of the rubber sensor, contact pressure was obtained from the rubber sensor using the medial meniscus and femur of the porcine knee. Three test conditions of intact meniscus, radial tear, and meniscectomy were prepared, and a compressive load of 100 N was applied. After confirming the high reliability of the rubber sensor, the intact meniscus had the most uniform pressure distribution map, while the pressure in the meniscectomy model was concentrated in the resection region. The high-pressure region was significantly smaller in the intact group than in the radial tear models after 80 and 100 N (P < 0.05). The rubber sensor captured the pressure concentration specific to each examination group and was useful for evaluating the relationship between the pattern of meniscal injury and changes in the biomechanical condition of the knee.

Six-Month Outcomes of Clinically Relevant Meniscal Injury in a Large-Animal Model

BACKGROUND

The corrective procedures for meniscal injury are dependent on tear type, severity, and location. Vertical longitudinal tears are common in young and active individuals, but their natural progression and impact on osteoarthritis (OA) development are not known. Root tears are challenging and they often indicate poor outcomes, although the timing and mechanisms of initiation of joint dysfunction are poorly understood, particularly in large-animal and human models.

PURPOSE/HYPOTHESIS

In this study, vertical longitudinal and root tears were made in a large-animal model to determine the progression of joint-wide dysfunction. We hypothesized that OA onset and progression would depend on the extent of injury-based load disruption in the tissue, such that root tears would cause earlier and more severe changes to the joint.

STUDY DESIGN

Controlled laboratory study.

METHODS

Sham surgeries and procedures to create either vertical longitudinal or root tears were performed in juvenile Yucatan mini pigs through randomized and bilateral arthroscopic procedures. Animals were sacrificed at 1, 3, or 6 months after injury and assessed at the joint and tissue level for evidence of OA. Functional measures of joint load transfer, cartilage indentation mechanics, and meniscal tensile properties were performed, as well as histological evaluation of the cartilage, meniscus, and synovium.

RESULTS

Outcomes suggested a progressive and sustained degeneration of the knee joint and meniscus after root tear, as evidenced by histological analysis of the cartilage and meniscus. This occurred in spite of spontaneous reattachment of the root, suggesting that this reattachment did not fully restore the function of the native attachment. In contrast, the vertical longitudinal tear did not cause significant changes to the joint, with only mild differences compared with sham surgery at the 6-month time point.

CONCLUSION

Given that the root tear, which severs circumferential connectivity and load transfer, caused more intense OA compared with the circumferentially stable vertical longitudinal tear, our findings suggest that without timely and mechanically competent fixation, root tears may cause irreversible joint damage.

CLINICAL RELEVANCE

More generally, this new model can serve as a test bed for experimental surgical, scaffold-based, and small molecule-driven interventions after injury to prevent OA progression.

Quantifying the differential functional behavior between the medial and lateral meniscus after posterior meniscus root tears

Meniscus tears of the knee are among the most common orthopedic knee injury. Specifically, tears of the posterior root can result in abnormal meniscal extrusion leading to decreased function and progressive osteoarthritis. Despite contemporary surgical treatments of posterior meniscus root tears, there is a low rate of healing and an incidence of residual meniscus extrusion approaching 30%, illustrating an inability to recapitulate native meniscus function. Here, we characterized the differential functional behavior of the medial and lateral meniscus during axial compression load and dynamic knee motion using a cadaveric model. We hypothesized essential differences in extrusion between the medial and lateral meniscus in response to axial compression and knee range of motion. We found no differences in the amount of meniscus extrusion between the medial and lateral meniscus with a competent posterior root (0.338mm vs. 0.235mm; p-value = 0.181). However, posterior root detachment resulted in a consistently increased meniscus extrusion for the medial meniscus compared to the lateral meniscus (2.233mm vs. 0.4705mm; p-value < 0.0001). Moreover, detachment of the posterior root of the medial meniscus resulted in an increase in extrusion at all angles of knee flexion and was most pronounced (4.00mm ± 1.26mm) at 30-degrees of knee flexion. In contrast, the maximum mean extrusion of the lateral meniscus was 1.65mm ± 0.97mm, occurring in full extension. Furthermore, only the medial meniscus extruded during dynamic knee flexion after posterior root detachment. Given the differential functional behaviors between the medial and lateral meniscus, these findings suggest that posterior root repair requires reducing overall meniscus extrusion and recapitulating the native functional responses specific to each meniscus.

Multiscale finite element musculoskeletal model for intact knee dynamics

BACKGROUND AND OBJECTIVE

The dynamic characteristics of the intact knee joint are valuable for treating knee osteoarthritis and designing knee prostheses. However, it remains a challenge to elucidate the detailed dynamics of the knee due to its complexity of anatomical structure and complex interaction with body dynamics.

METHODS

In this study, a unique subject-specific musculoskeletal model with a concurrent high-accuracy intact finite element knee model was created and used to simultaneously evaluate the kinematics and mechanics of an intact knee joint during the gait cycle.

RESULTS

A medial pivot motion with external rotation, and a large parallel anterior translation were observed in the stance and swing phases, respectively, which is consistent with the in vivo fluoroscopy measurements. The maximum axial contact force on the knee joint, observed at 45% of the gait cycle, is approximately 2.89 times the body weight. The medial cartilage bears 65.7% of the total axial contact force. The results demonstrate that the cartilage-cartilage contact bears most of the joint load (62.5%) compared to the cartilage-meniscus-cartilage contact (37.5%). Regarding contact mechanics, the maximum contact pressure on both sides of the tibial cartilage (8.2 MPa) is almost similar to the first axial loading peak (14%) of the gait cycle. Additionally, the maximum contact pressure (6.01 MPa) was observed during the stance phase of the gait cycle on the patellofemoral joint.

CONCLUSIONS

The predicted results on the tibiofemoral and patellofemoral joints provide a theoretical basis for the treatment of knee joint diseases and knee prosthesis design. Moreover, this approach presents a comprehensive tool to evaluate the mechanics at both the body and tissue levels. Therefore, it has a high potential for application in human biomechanics.

Immune cell profiles in synovial fluid after anterior cruciate ligament and meniscus injuries

Background

Anterior cruciate ligament (ACL) and meniscus tears are common knee injuries. Despite the high rate of post-traumatic osteoarthritis (PTOA) following these injuries, the contributing factors remain unclear. In this study, we characterized the immune cell profiles of normal and injured joints at the time of ACL and meniscal surgeries.

Methods

Twenty-nine patients (14 meniscus-injured and 15 ACL-injured) undergoing ACL and/or meniscus surgery but with a normal contralateral knee were recruited. During surgery, synovial fluid was aspirated from both normal and injured knees. Synovial fluid cells were pelleted, washed, and stained with an antibody cocktail consisting of fluorescent antibodies for cell surface proteins. Analysis of immune cells in the synovial fluid was performed by polychromatic flow cytometry. A broad spectrum immune cell panel was used in the first 10 subjects. Based on these results, a T cell-specific panel was used in the subsequent 19 subjects.

Results

Using the broad spectrum immune cell panel, we detected significantly more total viable cells and CD3 T cells in the injured compared to the paired normal knees. In addition, there were significantly more injured knees with T cells above a 500-cell threshold. Within the injured knees, CD4 and CD8 T cells were able to be differentiated into subsets. The frequency of total CD4 T cells was significantly different among injury types, but no statistical differences were detected among CD4 and CD8 T cell subsets by injury type.

Conclusions

Our findings provide foundational data showing that ACL and meniscus injuries induce an immune cell-rich microenvironment that consists primarily of T cells with multiple T helper phenotypes. Future studies investigating the relationship between immune cells and joint degeneration may provide an enhanced understanding of the pathophysiology of PTOA following joint injury.

The Natural History of Medial Meniscal Root Tears: A Biomechanical and Clinical Case Perspective

Posterior medial meniscus root tears (PMMRTs) make up a relatively notable proportion of all meniscus pathology and have been definitively linked to the progression of osteoarthritis (OA). While known risk factors for development of OA in the knee include abnormal tibial coronal alignment, obesity and female gender, PMMRTs have emerged in recent years as another significant driver of degenerative disease. These injuries lead to an increase in average contact pressure in the medial compartment, along with increases in peak contact pressure and a decrease in contact area relative to the intact state. Loss of the root attachment impairs the function of the entire meniscus and leads to meniscal extrusion, thus impairing the force-dissipating role of the meniscus. Anatomic meniscus root repairs with a transtibial pullout technique have been shown biomechanically to restore mean and peak contact pressures in the medial compartment. However, nonanatomic root repairs have been reported to be ineffective at restoring joint pressures back to normal. Meniscal extrusion is often a consequence of nonanatomic repair and is correlated with progression of OA. In this study, the authors will describe the biomechanical basis of the natural history of medial meniscal root tears and will support the biomechanical studies with a case series including patients that either underwent non-operative treatment (5 patients) or non-anatomic repair of their medial meniscal root tears (6 patients). Using measurements derived from axial MRI, the authors will detail the distance from native root attachment center of the non-anatomic tunnels and discuss the ongoing symptoms of those patients. Imaging and OA progression among patients who were treated nonoperatively before presentation to the authors will be discussed as well. The case series thus presented will illustrate the natural history of meniscal root tears, the consequences of non-anatomic repair, and the findings of symptomatic meniscal extrusion associated with a non-anatomic repair position of the meniscus.

Usefulness of ultrasonography for dynamic evaluation of medial meniscus hoop function in early knee osteoarthritis

This study aimed to evaluate the dynamics of the medial meniscus during knee flexion–extension by ultrasonography and compare them with MRI findings to confirm the usefulness of ultrasonography for evaluating early knee osteoarthritis (KOA). In total, 100 patients were diagnosed with early KOA using clinical and radiographical findings. Dynamic ultrasonographic evaluation and MRI were performed in all patients. Medial meniscal extrusion (MME) and medial meniscal tears were evaluated via ultrasonography and MRI. Abnormal MME was defined as MME > 2 mm on ultrasonography during knee extension. Patients with abnormal MME were divided into two groups: a decrease group (group D) and a non-decrease group (group N). Age, sex, absence or type of meniscus tear, and MME were compared between the two groups. Of the 100 patients, 75 demonstrated MME > 2 mm at knee extension. MME at all assessment positions using ultrasonography and MRI were significantly greater in group N (n = 34) than that in group D (n = 41). Medial meniscus posterior root tears or radial tears were observed in most cases in group N. A lack of decrease in MME from 0° to 90° of flexion on ultrasonography was a characteristic finding in patients with a loss of meniscal hoop function.

Bone bridge fixation has superior biomechanics on posterior knees to bone plug fixation after lateral meniscal allograft transplantation - A biomechanical study simulating partial weight-bearing conditions

BACKGROUND

It remains unknown how biomechanics change in posterior lateral knee using different fixation techniques in lateral meniscal allograft transplantation (MAT)during simulated toe-touch partial weight-bearing. This study aimed tocompare the biomechanical effects on posterior knee between bridgeand bone plug fixation in lateral MAT.

METHODS

Intact knee, bone bridge fixation, and bone plug fixation were tested with 500 N of axial load during knee flexion at 0°, 30°, and 60°, which simulated toe-touch partial weight-bearing. Contact area and peak pressure were assessed on posterior knee and the shift of peak pressure position were measured.

RESULTS

On the posterior lateral compartment, the contact mechanics of bone bridge fixation were similar to those of the intact knee (allP-values > 0.05), but its peak pressure was higher than that of intact knee at 60° (P = 0.002). For bone plug fixation, the contact area of the posterior lateral knee was significantly lower than those of intact knee and bone bridge fixation at 30° and 60° (allP-values < 0.05). The peak pressure of the posterior lateral knee was higher than that of the intact knee at all flexions and higher than that of bone bridge fixation at 30° and 60° (allP-values < 0.05). The peak pressure position of bone plug fixation shifted more laterally and posteriorly compared with intact knee and bone bridge fixation during knee flexion.

CONCLUSION

Bone bridges could maintain posterior knee biomechanics better than bone plug fixation during knee bending during partial weight-bearing.

Biomechanical Analysis of Segmental Medial Meniscal Transplantation in a Human Cadaveric Model

BACKGROUND

Meniscal deficiency has been reported to increase contact pressures in the affected tibiofemoral joint, possibly leading to degenerative changes. Current surgical options include meniscal allograft transplantation and insertion of segmental meniscal scaffolds. Little is known about segmental meniscal allograft transplantation.

PURPOSE

To evaluate the effectiveness of segmental medial meniscal allograft transplantation in the setting of partial medial meniscectomy in restoring native knee loading characteristics.

STUDY DESIGN

Controlled laboratory study.

METHODS

Ten fresh-frozen human cadaveric knees underwent central midbody medial meniscectomy and subsequent segmental medial meniscal allograft transplantation. Knees were loaded in a dynamic tensile testing machine to 1000 N for 20 seconds at 0°, 30°, 60°, and 90° of flexion. Four conditions were tested: (1) intact medial meniscus, (2) deficient medial meniscus, (3) segmental medial meniscal transplant fixed with 7 meniscocapsular sutures, and (4) segmental medial meniscal transplant fixed with 7 meniscocapsular sutures and 1 suture fixed through 2 bone tunnels. Submeniscal medial and lateral pressure-mapping sensors assessed mean contact pressure, peak contact pressure, mean contact area, and pressure mapping. Two-factor random-intercepts linear mixed effects models compared pressure and contact area measurements among experimental conditions.

RESULTS

The meniscal-deficient state demonstrated a significantly higher mean contact pressure than all other testing conditions (mean difference, ≥0.35 MPa; P < .001 for all comparisons) and a significantly smaller total contact area as compared with all other testing conditions (mean difference, ≤140 mm²; P < .001 for all comparisons). There were no significant differences in mean contact pressure or total contact area among the intact, transplant, or transplant-with-tunnel groups or in any outcome measure across all comparisons in the lateral compartment. No significant differences existed in center of pressure and relative pressure distribution across testing conditions.

CONCLUSION

Segmental medial meniscal allograft transplantation restored the medial compartment mean contact pressure and mean contact area to values measured in the intact medial compartment.

CLINICAL RELEVANCE

Segmental medial meniscal transplantation may provide an alternative to full meniscal transplantation by addressing only the deficient portion of the meniscus with transplanted tissue. Additional work is required to validate long-term fixation strength and biologic integration.

Synthetic PVA Osteochondral Implants for the Knee Joint: Mechanical Characteristics During Simulated Gait

BACKGROUND

Although polyvinyl alcohol (PVA) implants have been developed and used for the treatment of femoral osteochondral defects, their effect on joint contact mechanics during gait has not been assessed.

PURPOSE/HYPOTHESIS

The purpose was to quantify the contact mechanics during simulated gait of focal osteochondral femoral defects and synthetic PVA implants (10% and 20% by volume of PVA), with and without porous titanium (pTi) bases. It was hypothesized that PVA implants with a higher polymer content (and thus a higher modulus) combined with a pTi base would significantly improve defect-related knee joint contact mechanics.

STUDY DESIGN

Controlled laboratory study.

METHODS

Four cylindrical implants were manufactured: 10% PVA, 20% PVA, and 10% and 20% PVA disks mounted on a pTi base. Devices were implanted into 8 mm-diameter osteochondral defects created on the medial femoral condyles of 7 human cadaveric knees. Knees underwent simulated gait and contact stresses across the tibial plateau were recorded. Contact area, peak contact stress, the sum of stress in 3 regions of interest across the tibial plateau, and the distribution of stresses, as quantified by tracking the weighted center of contact stress throughout gait, were computed for all conditions.

RESULTS

An osteochondral defect caused a redistribution of contact stress across the plateau during simulated gait. Solid PVA implants did not improve contact mechanics, while the addition of a porous metal base led to significantly improved joint contact mechanics. Implants consisting of a 20% PVA disk mounted on a pTi base significantly improved the majority of contact mechanics parameters relative to the empty defect condition.

CONCLUSION

The information obtained using our cadaveric test system demonstrated the mechanical consequences of femoral focal osteochondral defects and provides biomechanical support to further pursue the efficacy of high-polymer-content PVA disks attached to a pTi base to improve contact mechanics.

CLINICAL RELEVANCE

As a range of solutions are explored for the treatment of osteochondral defects, our preclinical cadaveric testing model provides unique biomechanical evidence for the continued investigation of novel solutions for osteochondral defects.

Meniscal Injuries: Mechanism and Classification

Meniscal tears may be managed through conservative physical therapy and nonsteroidal anti-inflammatory medications or operative intervention. Meniscal repair is superior to partial meniscectomy with better functional outcomes and less severe degenerative changes over time. Surgical advances in operative techniques, modern instrumentation and biological enhancements collectively improve healing rates of meniscal repair. However, failed repair is not without consequences and can negative impact patient outcomes. Therefore, it is imperative for surgeons to have a thorough understanding of the vascular zones and biomechanical classifications of meniscal tears in order to best determine the most appropriate treatment.

Meniscus Repair Techniques

The menisci play a vital role in maintaining knee function and protecting the chondral surfaces. Acute and chronic tears are common injuries among both young athletes and older patients with early degenerative changes. The progression of physiological derangement and chondral injury after meniscus injury and meniscectomy have prompted interest in expanding meniscus repair techniques. Recent literature encourages an attempt at repair in tear patterns previously declared irreparable if the tissue quality allows. The orthopedic surgeon should understand the multitude of techniques available to them and be prepared to combine techniques to optimize the quality of their repair construct. While biological augmentation may show some promising early results, the quality of the current data precludes strong recommendations in their favor.

Degenerative Joint Disease After Meniscectomy

The meniscus has an important role in stabilizing the knee joint and protecting the articular cartilage from shear forces. Meniscus tears are common injuries and can disrupt these protective properties, leading to an increased risk of articular cartilage damage and eventual osteoarthritis. Certain tear patterns are often treated with arthroscopic partial meniscectomy, which can effectively relieve symptoms. However, removal of meniscal tissue can also diminish the ability of the meniscus to dissipate hoop stresses, resulting in altered biomechanics of the knee joint including increased contact pressures. This makes meniscal repair an important treatment consideration whenever possible. Understanding the incidence and mechanism of osteoarthritis development after arthroscopic partial meniscectomy as it relates to different tear morphologies and other treatment alternatives (ie, meniscus repair) is important to appropriately treat meniscus tears.

Extracellular vesicles derived from mesenchymal stromal cells mediate endogenous cell growth and migration via the CXCL5 and CXCL6/CXCR2 axes and repair menisci

Background

Mesenchymal stromal cell-derived extracellular vesicles (MSC-EVs) are promising candidates for tissue regeneration therapy. However, the therapeutic efficacy of MSC-EVs for meniscus regeneration is uncertain, and the mechanisms underlying MSC-EV-mediated tissue regeneration have not been fully elucidated. The aims of this study were to evaluate the therapeutic efficacy of intra-articular MSC-EV injection in a meniscus defect model and elucidate the mechanism underlying MSC-EV-mediated tissue regeneration via combined bioinformatic analyses.

Methods

MSC-EVs were isolated from human synovial MSC culture supernatants via ultrafiltration. To evaluate the meniscus regeneration ability, MSC-EVs were injected intra-articularly in the mouse meniscus defect model immediately after meniscus resection and weekly thereafter. After 1 and 3 weeks, their knees were excised for histological and immunohistochemical evaluations. To investigate the mechanisms through which MSC-EVs accelerate meniscus regeneration, cell growth, migration, and chondrogenesis assays were performed using treated and untreated chondrocytes and synovial MSCs with or without MSC-EVs. RNA sequencing assessed the gene expression profile of chondrocytes stimulated by MSC-EVs. Antagonists of the human chemokine CXCR2 receptor (SB265610) were used to determine the role of CXCR2 on chondrocyte cell growth and migration induced by MSC-EVs.

Results

In the meniscus defect model, MSC-EV injection accelerated meniscus regeneration and normalized the morphology and composition of the repaired tissue. MSC-EVs stimulated chondrocyte and synovial MSC cell growth and migration. RNA sequencing revealed that MSC-EVs induced 168 differentially expressed genes in the chondrocytes and significantly upregulated CXCL5 and CXCL6 in chondrocytes and synovial MSCs. Suppression of CXCL5 and CXCL6 and antagonism of the CXCR2 receptor binding CXCL5 and CXCL6 negated the influence of MSC-EVs on chondrocyte cell growth and migration.

Conclusions

Intra-articular MSC-EV administration repaired meniscus defects and augmented chondrocyte and synovial MSC cell growth and migration. Comprehensive transcriptome/RNA sequencing data confirmed that MSC-EVs upregulated CXCL5 and CXCL6 in chondrocytes and mediated the cell growth and migration of these cells via the CXCR2 axis.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13287-021-02481-9.

H-Plasty Repair Technique Improved Tibiofemoral Contact Mechanics After Repair for Adjacent Radial Tears of Posterior Lateral Meniscus Root: A Biomechanical Study

PURPOSE

To compare the time-zero tibiofemoral contact mechanics among the 4 different suturing repairs: transtibial pullout suture repair, suture anchor repair, side-to-side repair, and H-plasty repair.

METHODS

Twenty-four human cadaveric knees were included. Each lateral meniscus condition (intact, radial tear, and repair) was tested under a 1000-N axial compressive load at 0°, 30°, 60°, and 90° of flexion. Four different repair techniques, transtibial pullout, suture anchor, side-to-side, and H-plasty repair technique, were tested. Tibiofemoral mean and peak contact pressure and contact area in the lateral and medial compartments were measured by Tekscan sensors.

RESULTS

Radial tears adjacent to the posterior lateral meniscus root produced significantly decreased contact area and increased mean and peak contact pressures in the lateral compartment across all angles (P < .05). All repair groups could improve the contact mechanics relative to the torn condition (P < .05), but only H-plasty repair showed no significant difference in the mean and peak contact pressure and contact area compared with that of the intact state at all flexion angles (P > .05).

CONCLUSIONS

The results showed that the tibiofemoral contact mechanics after adjacent radial tears of the posterior lateral meniscal root were improved to the intact level by H-plasty repair at time-zero. The additional vertical mattress sutures act as "stabilizers" to provide a more stable environment in distributing vertical tibiofemoral pressure. The other 3 repair techniques also significantly improved lateral tibiofemoral contact mechanics relative to the corresponding tear conditions.

CLINICAL RELEVANCE

The results of this study suggest that H-plasty repair can restore the biomechanical properties to the intact state. Since it was a time-zero cadaveric study, the results should be carefully used in clinical practices.

Medial sided articular impaction in tibial plateau fractures

INTRODUCTION

Tibial plateau fractures are a heterogenous group of injuries with a variable amount of articular injury and are commonly associated with lateral sided articular impaction. Previous work has focused on describing the morphology of tibial plateau fractures, but has neglected description of medial sided articular impaction. The aim of this investigation was to assess the morphology of medial sided articular impaction in tibial plateau fractures, with specific attention directed toward the frequency, location, size, and associated fracture patterns.

METHODS

Skeletally mature patients presenting to a Level I trauma center from 2008-2018 with a tibial plateau fracture (AO/OTA 41B-C) were identified retrospectively. Fractures were classified by AO/OTA and Schatzker type. Radiographs and computed tomography (CT) scans were reviewed to identify and localize medial sided articular impaction. The location and surface area of impaction was characterized by creating frequency diagram heat maps from axial CT scans. Descriptive statistics were performed using standard measures.

RESULTS

Of the 1032 tibial plateau fractures included, 82 (7.9%) were noted to have medial sided articular impaction. Rate of impaction varied by fracture type (p = 0.03): Schatzker II, 2% (7 of 381); Schatzker IV, 21% (19 of 96); and Schatzker VI, 11% (56 of 524). Average total surface area of impaction was 9% of the total and 19% of the medial plateau area. Area of impaction varied by fracture type (p = 0.004): Schatzker II, 6% (95% confidence interval [CI], 4%-7%); Schatzker IV, 11% (95% CI, 9%-13%), and Schatzker VI, 9% (95% CI, 7%-11%). The area of impaction occurred primarily along the lateral aspect of the medial plateau in Schatzker II fractures, in the anteromedial quadrant of Schatzker IV fractures, and was evenly distributed across the medial plateau in Schatzker VI fractures.

CONCLUSIONS

Surgeons should be aware that medial articular impaction is present in approximately 8% of tibial plateau fractures. Schatzker IV fractures are most likely to have medial impaction and a larger proportion of the joint surface involved in these injuries.