The salvage of complex hindfoot problems with use of a custom talar total ankle prosthesis

Early results of combined total ankle total talus replacement in the revision setting

BACKGROUND

Revision of failed total ankle replacement (TAR) is challenging and associated with increased morbidity. Given the increased popularity of TAR in treating end-stage ankle arthritis (ESAA), viable revision options are needed. The objective of this case series is to present a minimum 2-year clinical and radiographic outcomes of patient-specific custom 3D-printed total ankle total talus (TATR) prostheses in this unique subset of patients.

METHODS

19 participants with ESAA and failed primary TAR who underwent TATR by a single surgeon at our institution from 2019 to 2021 were retrospectively identified. All participants were indicated for revision of primary STAR implant (Stryker, Kalamazoo, MI) and underwent replacement with 3D-printed titanium implants based on preoperative CT analysis (Additive Orthopaedics, Little Silver, NJ). Custom components included a mobile-bearing total talus and stemmed tibial system, performed through an anterior approach. Pre- and postoperative patient-reported outcomes were assessed using the Patient Reported Outcomes Measurement Information System (PROMIS). Pre- and postoperative implant alignment was assessed using medial distal tibial angle (MDTA) and tibiotalar angle (TTA) on anteroposterior, and sagittal tibial angle (STA) on lateral weight-bearing plain films.

RESULTS

The average patient age was 60.6 (range, 39-77) years, with an average follow-up of 37.9 (range, 25.3-57.5) months. There was statistically significant improvement in all PROMIS domains. Short-term survivorship was 100%, with two participants (11.0%) requiring reoperation for postoperative complications: one underwent open reduction internal fixation of the tibia for a periprosthetic fracture, and another underwent medial gutter debridement and tarsal tunnel release for recurrent pain. There were no significant differences in pre- versus postoperative radiographic alignment measured by MDTA (89.9 vs 86.4), TTA (89.7 vs 88.1), or STA (85.2 vs 85.3).

CONCLUSION

Custom 3D-printed TATR is a promising option for revision TAR. There was significant short-term improvement in pain and physical function, with excellent short-term survivorship and an acceptable postoperative complication rate.

Outcomes following total ankle total talus replacement: A systematic review

BACKGROUND

Prosthetic substitution of the talus presents a significant challenge to the foot and ankle surgeon. The shear and compressive forces on the talus and its tenuous blood supply lead to high rates of avascular necrosis and eventual talar collapse. The purpose of this systematic review is to evaluate whether total ankle total talus replacement (TATTR) leads to improved clinical and radiographic outcomes with appropriate safety metrics in patients with a history of avascular necrosis or significant trauma.

METHODS

We searched the concepts of talus, prosthesis, and arthroplasty in MEDLINE (PubMed), Embase (Elsevier), CINAHL Complete (EBSCOhost), and Scopus (Elsevier) from the database's inception through March 9, 2023. Inclusion Criteria were 1) previous trauma to the talus, 2) post-traumatic arthritis to the tibiotalar joint, 3) avascular necrosis of talus, 4) multiple failed prior interventions, 5) degenerative osteoarthritis to the tibiotalar joint, and 6) inflammatory arthropathy to tibiotalar joint. Patients less than 18 years of age and manuscripts in non-English languages were excluded.

RESULTS

Of the 7625 references, 16 studies met the inclusion criteria, yielding data from 136 patients (139 ankles). The studies varied in design, with case reports and retrospective case series being predominant. The overall weighted average modified Coleman Methodology Score (mCMS) was 70.4 out of 100, indicating moderate flaws in study design that may be subject to various forms of bias and possible confounders. Demographics showed a diverse range of etiologies, with alumina ceramic being the primary prosthesis material. Functional scores demonstrated improvements in dorsiflexion and plantarflexion, although patient-reported outcome measures (PROs) were inconsistently reported. Complications included fractures, heterotopic ossification, prolonged wound healing, and infections. Revision details were sparsely reported.

CONCLUSION

TATTR is a promising treatment modality for improving short-term functional outcomes for patients with avascular necrosis or trauma-related issues. However, this systematic review underscores the need for standardized reporting, longer-term follow-ups, and further research to establish the procedure's efficacy and safety, particularly in comparison to other treatment modalities.

LEVEL OF EVIDENCE

III, Systematic Review of Level IV Studies.

Anthropomorphic Characterization of Ankle Joint

Even though total ankle replacement has emerged as an alternative treatment to arthrodesis, the long-term clinical results are unsatisfactory. Proper design of the ankle device is required to achieve successful arthroplasty results. Therefore, a quantitative knowledge of the ankle joint is necessary. In this pilot study, imaging data of 22 subjects (with both females and males and across three age groups) was used to measure the morphological parameters of the ankle joint. A total of 40 measurements were collected by creating sections in the sagittal and coronal planes for the tibia and talus. Statistical analyses were performed to compare genders, age groups, and image acquisition techniques used to generate 3D models. About 13 measurements derived for parameters (TiAL, SRTi, TaAL, SRTa, TiW, TaW, and TTL) that are very critical for the implant design showed significant differences (p-value < 0.05) between males and females. Young adults showed a significant difference (p-value < 0.05) compared to adults for 15 measurements related to critical tibial and talus parameters (TiAL, TiW, TML, TaAL, SRTa, TaW, and TTL), but no significant differences were observed between young adults and older adults, and between adults and older adults for most of the parameters. A positive correlation (r > 0.70) was observed between tibial and talar width values and between the sagittal radius values. When compared with morphological parameters obtained in this study, the sizes of current total ankle replacement devices can only fit a very limited group of people in this study. This pilot study contributes to the comprehensive understanding of the effects of gender and age group on ankle joint morphology and the relationship between tibial and talus parameters that can be used to plan and design ankle devices.

Management of Periprosthetic Bone Cysts After Total Ankle Arthroplasty

Modern improvements in total ankle arthroplasty (TAA) have increased the performance of this procedure for treatment of end-stage ankle arthritis. A common finding after TAA is the formation of periprosthetic bone cysts, which can be clinically silent or result in TAA failure. The exact cause of periprosthetic bones cysts has not been established, but major theories are related to osteolysis secondary to implant wear, micromotion, and stress shielding. Treatment can be nonoperative with clinical observation for small, asymptomatic cysts. Large, progressive, and symptomatic cysts often merit surgical treatment with debridement and grafting, revision TAA, or salvage arthrodesis.

Adult Acquired Flatfoot Deformity

Adult acquired flatfoot deformity (AAFD) is a condition commonly seen by orthopaedic surgeons. Posterior tibial tendon dysfunction is thought to be the initial pathoanatomic etiology that leads to this deformity. Successful resolution of the pain associated with AAFD can be achievable with nonsurgical methods. Patients who continue to have pain or functional limitations despite nonsurgical treatment can find improvement with appropriately selected surgical interventions. This article addresses new advances in treatment based on the stage of AAFD and will identify areas of continued development with a focus on surgical management. The literature continues to evolve as demonstrated by a recent update regarding the nomenclature and treatment of this condition to progressive collapsing flatfoot deformity. Future goals of research include understanding the natural history of the disease, from asymptomatic to symptomatic, and studying a wide array of newer treatments and implants that have not been prospectively evaluated.

Metallic 3D Printed Total Talus Replacement: A Case Study

Total talar replacement is a viable treatment option for talar injuries and pathologies. We present a single case study of a 73-year-old female with idiopathic necrosis of the talar which was treated with a total talar replacement prosthesis. A patient specific custom talar prosthesis was created using the mirror image of the contralateral healthy talus obtained using a CT scan of the contralateral limb. The patient underwent surgical resection of the pathologic talus with implantation of the custom talar prosthesis. At the 12 month mark the foot function index (FFI) score improved from 95.9% pre-op to 4.7% post op and american orthopedic foot and ankle score 0 pre-op to 94 post op. Further research and longer followup will be needed, but the current results are very favorable.

[Adult Acquired Flatfoot Deformity: Diagnosis and Surgical Treatment]

The adult acquired flatfoot is a deformity with slow progression, which may leads to pain and restrictions of activities of daily living if untreated. Various treatment strategies, depending on the clinical and radiological presentation, exist. Therefore, an individual therapy approach is necessary for optimal treatment. This article covers etiopathologic aspects, conservative and operative treatments as well as postoperative mobilization and rehabilitation.

Application of a Customized Total Talar Prosthesis for Revision Total Ankle Arthroplasty

BACKGROUND

The rate of revision surgery for total ankle arthroplasty (TAA) is higher than for hip and knee arthroplasties. Tibiotalocalcaneal arthrodesis is widely used; however, it requires a large allograft. Thus, the use of a customized total talar prosthesis in combination with the tibial component of TAA (combined TAA) may be an effective strategy for talar component subsidence. This study aimed to evaluate the clinical and radiographic effectiveness of the combined TAA in such revision cases.

METHODS

Between 2000 and 2015, 10 patients (10 women; 10 ankles) were treated using the combined TAA for revision after standard TAA or combined procedures that included the use of a talar body prosthesis. In 6 patients, the tibial component was concurrently replaced. The median follow-up period was 49 months (interquartile range [IQR], 24.5 to 90 months). The Japanese Society for Surgery of the Foot (JSSF) ankle-hindfoot scale score, a numerical rating scale (NRS) pain score, passive range of motion of the ankle, and the presence of osteophytes and degenerative changes in the adjacent joints were assessed preoperatively and at final postoperative follow-up.

RESULTS

The median NRS pain score improved significantly, from 7 (IQR, 6.25 to 8.75) to 2 (IQR, 1 to 3). The median JSSF ankle-hindfoot scale total score improved significantly, from 64 (IQR, 56.25 to 71.5) to 88.5 (IQR, 79.75 to 96). In the subcategories of this scale, the median pain score improved from 20 (IQR, 20 to 27.5) to 35 (IQR, 30 to 40), and the median function score improved from 34 (IQR, 26.5 to 37) to 43.5 (IQR, 39.75 to 46). The median range of motion improved from 29° (IQR, 25.5° to 35°) to 35° (IQR, 31.25° to 43.75°). No significant difference in osteophyte formation was found. Degenerative changes in the adjacent joint were found only in the talonavicular joint.

CONCLUSIONS

The combined TAA, used in revision for postoperative complications after standard TAA or combined procedures including the use of a talar body prosthesis, was associated with improved objective JSSF ankle-hindfoot scale scores, subjective pain assessment, and range of motion in the ankle.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Adult rigid flatfoot: Triple arthrodesis and osteotomy

To analyze the efficacy of arthrodesis combined with osteotomy applied to subtalar, calcaneocuboid, and talonavicular joints for the treatment of adult rigid flatfoot.This retrospective study included 29 adult patients with rigid flatfoot who underwent triple arthrodesis combined with osteotomy from January 2015 to December 2017. All patients suffered from stage III of adult acquired flatfoot. Patients returned for a clinical and radiologic follow-up evaluation at an average of 19.5 (range, 15-27) months postoperatively. Outcomes were assessed by comparing pre- and postoperative AOFAS scores, VAS pain scores, and Karlsson scores, and the radiographic assessment including Meary, Pitch, and Kite angles.Twenty six patients returned for final evaluation. Twenty four patients had an excellent or good outcome on patient subjective self-assessment. All the VAS scores, AOFAS scores, and Karlsson scores at final follow-up showed different extents of improvement. The mean Meary angle significantly decreased from 25.8 ± 5.4 degrees preoperatively to 6.9 ± 7.7 degrees at final follow-up, and the mean Pitch angle improved markedly from 12.5 ± 3.7 points preoperatively to 23.2 ± 4.1 points at final follow-up (P < .001).Arthrodesis combined with osteotomy can effectively correct calcaneal valgus deformity, restore arch structure, and relieve foot pain in adult rigid flatfoot.

Survivorship and long-term outcome of a consecutive series of 200 Scandinavian Total Ankle Replacement (STAR) implants

AIMS

We report the long-term clinical and radiological outcomes of a consecutive series of 200 total ankle arthroplasties (TAAs, 184 patients) at a single centre using the Scandinavian Total Ankle Replacement (STAR) implants.

PATIENTS AND METHODS

Between November 1993 and February 2000, 200 consecutive STAR prostheses were implanted in 184 patients by a single surgeon. Demographic and clinical data were collected prospectively and the last available status was recorded for further survival analysis. All surviving patients underwent regular clinical and radiological review. Pain and function were assessed using the American Orthopaedic Foot and Ankle Society (AOFAS) hindfoot scoring system. The principal endpoint of the study was failure of the implant requiring revision of one or all of the components. Kaplan-Meier survival curves were generated with 95% confidence intervals and the rate of failure calculated for each year.

RESULTS

A total of 84 patients (87 ankles) were alive by the end of this study. Of the surviving 84 patients (87 ankles; rheumatoid arthritis (RA), n = 40; OA, n = 47), 45 were women and 39 were men, with a mean age of 54 years (18 to 72 years) at the time of surgery. A total of 32 implants failed (16%), requiring revision surgery. The mean time to revision was 80 months (2 to 257). The implant survival at 15.8 years, using revision as an endpoint, was 76.16% (95% confidence interval (CI) 64.41 to 87.91). We found a steady but low decrease in survival over the study period. The mean AOFAS score improved from 28 (10 to 52) preoperatively to 61 (20 to 90) at long-term follow-up.

CONCLUSION

STAR prostheses in the United Kingdom have now been largely superseded by newer design TAAs, potentially with improved characteristics and surgical techniques. The long-term survivorship for the STAR prosthesis can provide a benchmark for these later designs of ankle arthroplasty.

3D Printed Total Talar Replacement: A Promising Treatment Option for Advanced Arthritis, Avascular Osteonecrosis, and Osteomyelitis of the Ankle

Advanced ankle arthritis, avascular osteonecrosis, and osteomyelitis of the ankle remain a surgical challenge in the foot and ankle arena with limited treatment options. Multiple medical comorbidities contribute to total loss of the talus. Collapse of the talar body as a complication of total ankle arthroplasty, talectomy in infection, and septic talus necrosis or severe bone defects caused by tumor resection may result in need for total talar replacement. Ankle arthrodesis and tibiocalcaneal fusion after talectomy can produce severe disability of the ankle and foot. Total ankle replacement is a viable option for treatment of end-stage ankle arthritis in appropriate patient populations.

Revision of Stemmed Agility Implants

Total ankle arthroplasty has advanced rapidly in the last 20 years. Early agility implants enjoyed improved survivability compared with more archaic total ankle implants. When talar subsidence occurs, the revision options include a stemmed component to improve stability by spanning the subtalar joint. Removal and revision of these stemmed components can be difficult because of ingrowth and bone loss.

Management of Talar Component Subsidence

Component subsidence has been found to be the top complication that leads to failure of the total ankle arthroplasty (TAA). The cause of subsidence formation is unclear, and is multifactorial. Talar subsidence is more frequently met than tibial subsidence, and the subsequent big bone loss is demanding to handle. As a revision treatment option, neither a revision TAA nor a salvage ankle and/or hindfoot arthrodesis procedure is easy to perform or can obtain a definite outcome. The Salto XT can be used to treat most of the TAA systems available for use in the United States with acceptable short-term outcomes.

Are periprosthetic osteolytic lesions in ankle worth bone grafting?

BACKGROUND

We retrospectively evaluated the medium-term follow-up of bone grafting due to periprosthetic osteolytic lesions in ankles.

METHODS

34 ankles (32 patients) with total ankle arthroplasty (TAA) underwent re operation. Indications were large periprosthetic osteolytic lesions or continuous growing of the lesions. The osteolytic lesions were imaged by CT before reoperation and once a year after that. The mean CT follow-up after re operation was 3.8 years (range, 2-6.2 years). Patient's clinical outcome was also monitored.

RESULTS

Osteolysis continued to progress in 44 bone grafted lesions (68%) in CT follow-up. Pain (p=0.04) and location of the lesion (p=0.03) were associated with progression of osteolysis. In 18 bone grafted osteolytic lesions (28%) the radiological survival remained excellent. 25 out of 34 ankles showed improvement of the function after bone grafting.

CONCLUSIONS

There is no established treatment protocol for osteolysis around TAA. Bone grafting is one alternative in the treatment of osteolytic lesions.

Development of an internally braced prosthesis for total talus replacement

Total loss of talus due to trauma or avascular necrosis, for example, still remains to be a major challenge in foot and ankle surgery with severely limited treatment options. Implantation of a custom made total talar prosthesis has shown promising results so far. Most important factors for long time success are degree of congruence of articular surfaces and ligamentous stability of the ankle. Therefore, our aim was to develop an optimized custom made prosthesis for total talus replacement providing a high level of primary stability. A custom made hemiprosthesis was developed using computed tomography and magnetic resonance imaging data of the affected and contralateral talus considering the principles and technology for the development of the S.T.A.R. prosthesis (Stryker). Additionally, four eyelets for fixation of artificial ligaments were added at the correspondent footprints of the most important ligaments. Two modifications can be provided according to the clinical requirements: A tri-articular hemiprosthesis or a bi-articular hemiprosthesis combined with the tibial component of the S.T.A.R. total ankle replacement system. A feasibility study was performed using a fresh frozen human cadaver. Maximum range of motion of the ankle was measured and ligamentous stability was evaluated by use of standard X-rays after application of varus, valgus or sagittal stress with 150 N. Correct implantation of the prosthesis was technically possible via an anterior approach to the ankle and using standard instruments. Malleolar osteotomies were not required. Maximum ankle dorsiflexion and plantarflexion were measured as 22-0-28 degrees. Maximum anterior displacement of the talus was 6 mm, maximum varus tilt 3 degrees and maximum valgus tilt 2 degrees. Application of an internally braced prosthesis for total talus replacement in humans is technically feasible and might be a reasonable procedure in carefully selected cases with no better alternatives left.

Custom-made total ankle arthroplasty for the salvage of major talar bone loss

Aims

A failed total ankle arthroplasty (TAA) is often associated with much bone loss. As an alternative to arthrodesis, the surgeon may consider a custom-made talar component to compensate for the bone loss. Our aim in this study was to assess the functional and radiological outcome after the use of such a component at mid- to long-term follow-up.

Patients and Methods

A total of 12 patients (five women and seven men, mean age 53 years; 36 to77) with a failed TAA and a large talar defect underwent a revision procedure using a custom-made talar component. The design of the custom-made components was based on CT scans and standard radiographs, when compared with the contralateral ankle. After the anterior talocalcaneal joint was fused, the talar component was introduced and fixed to the body of the calcaneum.

Results

At a mean follow-up of 6.9 years (1 to 13), 11 ankles were stable with no radiological evidence of loosening. Only one was lost to follow-up. The mean arc of movement was 21° (10° to 35°). A total of nine patients (75%) were satisfied or very satisfied with the outcome, two (17%) were satisfied but with reservations and one (8%) was not satisfied. All but one patient had an improvement in the American Orthopaedic Foot and Ankle Society hindfoot score (p = 0.01). Just one patient developed deep infection, leading to arthrodesis.

Conclusion

A custom-made talar component yielded satisfactory results with regard to function, stability and satisfaction. This should encourage the use of such components as an alternative to arthrodesis of the ankle in patients with a failed TAA. Cite this article: Bone Joint J 2017;99-B:231–6.

Intraoperative Radiation Exposure During Revision Total Ankle Replacement

Intraoperative C-arm image intensification is required for primary total ankle replacement implantation. Significant radiation exposure has been linked to these procedures; however, the radiation exposure during revision total ankle replacement remains unknown. Therefore, we sought to evaluate the radiation exposure encountered during revision total ankle replacement. The data from 41 patients were retrospectively analyzed from a prospective database: 19 Agility(™) to Agility(™); 4 Agility(™) to Custom Agility(™); 9 Agility(™) to INBONE(®) II; 5 Agility(™) to Salto Talaris(®) XT; 2 Scandinavian Total Ankle Replacement Prosthesis to Salto Talaris(®) XT; and 2 INBONE(®) I to INBONE(®) II revision total ankle replacements were performed. Two broad categories were identified: partial revision (Agility(™) to Agility(™), Agility(™) to Custom Agility(™), INBONE(®) I to INBONE(®) II) and complete conversion (Agility(™) to INBONE(®) II, Agility(™) to Salto Talaris(®) XT, Scandinavian Total Ankle Replacement Prosthesis to Salto Talaris(®) XT). The mean radiation exposure per case was significant at 3.49 ± 2.21 mGy. Complete conversions, specifically Agility(™) to INBONE(®) II, exhibited the greatest radiation exposure and C-arm time. Revision implant selection and revision type (complete or partial) directly contributed to radiation exposure. Accordingly, revision systems requiring less radiation exposure are preferable. Surgeons should strive to minimize intraoperative complications and limit additional procedures to those necessary, because both lead to additional radiation exposure.

Incidence of Complications During Initial Experience with Revision of the Agility and Agility LP Total Ankle Replacement Systems: A Single Surgeon's Learning Curve Experience

As the frequency in which foot and ankle surgeons are performing primary total ankle replacement (TAR) continues to build, revision TAR will likely become more commonplace, creating a need for an established benchmark by which to evaluate the safety of revision TAR as determined by the incidence of complications. Currently, no published data exist on the incidence of intraoperative and early postoperative complications during revision of the Agility or Agility LP Total Ankle Replacement Systems during the surgeon learning curve period; therefore, the authors sought to determine this incidence during the senior author's learning curve period.

Management of Osseous and Soft-Tissue Ankle Equinus During Total Ankle Replacement

Obtaining functional alignment of a total ankle replacement, including physiologic sagittal plane range of motion, is paramount for a successful outcome. This article reviews the literature on techniques available for correction of osseous and soft-tissue equinus at the time of index total ankle replacement. These techniques include anterior tibiotalar joint cheilectomy, posterior superficial muscle compartment lengthening, posterior ankle capsule release, and release of the posterior portions of the medial and lateral collateral ligament complexes. The rationale for these procedures and the operative sequence of events for these procedures are presented.

Salvage of a Failed Agility Total Ankle Replacement System Associated with Acute Traumatic Periprosthetic Midfoot Fractures

This article presents a rare case involving combined revision of a failed Agility Total Ankle Replacement System (DePuy Orthopaedics, Warsaw, Indiana) and open reduction with internal fixation of periprosthetic midfoot fractures secondary to acute traumatic injury. The rationale for these procedures, the operative sequence of events, and recovery course are presented in detail. Causes for concern regarding subsequent revision, should this be required, are raised.

The Salto Talaris XT Revision Ankle Prosthesis

The Salto Talaris XT Revision Ankle Prosthesis is an anatomically designed fixed-bearing prosthesis available in the United States based on the design of previous Salto systems. The Salto Talaris XT Revision Ankle Prosthesis design optimizes surface area, cortical contact, and ultrahigh-molecular-weight polyethylene conformity. Two tibial component designs, both with the same base plate dimensions, are available, the standard conical fixation plug affixed to a short keel and a long-stemmed version. The author presents an overview of the Salto Talaris XT Revision Ankle Prosthesis surgical technique and pearls for successful application.

Management of Massive Hindfoot Osteolysis Secondary to Failed INBONE I Total Ankle Replacement

This article presents a procedure whereby a failed INBONE I saddle talar component and polyethylene insert associated with massive cystic changes within the talus and calcaneus secondary to aseptic osteolysis was treated with impaction cancellous allograft bone graft impregnated with autogenous proximal tibia bone marrow aspirate and conversion to an INBONE II sulcus talar component and polyethylene insert. Concomitantly, a percutaneous tendo-Achilles lengthening and posterior capsule release was performed to enhance ankle dorsiflexion. The rationale for these procedures, the operative sequence of events, and recovery course are presented in detail. Causes for concern regarding subsequent revision, should this be required, are raised.

Evaluation and management of the painful total ankle arthroplasty

Total ankle arthroplasty (TAA) is an increasingly popular treatment option for patients with end-stage ankle arthritis. Although improved short- and long-term clinical and radiographic outcomes have been achieved with TAA, revision surgery may be necessary in the setting of aseptic loosening, subsidence, impingement, arthrofibrosis, or infection. Factors such as patient selection, implant design, and surgical technique can all contribute to TAA failure. Treatment of patients with a painful TAA is complex and requires careful consideration of symptom history, workup, and nonsurgical and surgical treatment options. Surgical management of failed TAA includes arthrodesis, revision surgery, or below-knee amputation.

Strategies for Revision Total Ankle Replacement

As the frequency of primary total ankle replacement (TAR) continues to build, revision will become more commonplace. At present there are no “standard principles” associated with revision TAR. What is clear is that the current approaches are technically complex, fraught with complications and no one approach represents the only answer. Exchange of TAR metallic components to the same system standard or dedicated revision components are viable options with limited occurrence of complications. Explantation and conversion to custom-design long stemmed components has limited availability. Explantation and conversion to another TAR system is high-risk and has strong potential for complications. The use of metal reinforced polymethylmethacrylate cement augmentation of failed TAR systems and tibio-talo-calcaneal arthrodesis should be reserved for very select situations where other options are not possible. There is a real need for long-term survivorship following revision TAR and future efforts ought to be directed in this area.

Approach and treatment of the adult acquired flatfoot deformity

Adult acquired flatfoot deformity (AAFD), embraces a wide spectrum of deformities. AAFD is a complex pathology consisting both of posterior tibial tendon insufficiency and failure of the capsular and ligamentous structures of the foot. Each patient presents with characteristic deformities across the involved joints, requiring individualized treatment. Early stages may respond well to aggressive conservative management, yet more severe AAFD necessitates prompt surgical therapy to halt the progression of the disease to stages requiring more complex procedures. We present the most current diagnostic and therapeutic approaches to AAFD, based on the most pertinent literature and our own experience and investigations.

Management of extensive talar osteolysis with Agility™ total ankle replacement systems using geometric metal-reinforced polymethylmethacrylate cement augmentation

The Agility™ Total Ankle Replacement System, almost exclusively without polymethylmethacrylate cement fixation, was the most commonly used implant in the United States from 1998 to 2007. Much attention has been given to the intraoperative complications and incision healing-related problems. However, it is the intermediate- and long-term complications, specifically, aseptic osteolysis, talar component loosening, subsidence, and progressive malalignment, that require careful consideration, because the revision options are limited. We describe a technique for management of extensive talar aseptic osteolysis for revision of Agility™ total ankle replacement systems with use of geometric metal-reinforced polymethylmethacrylate cement augmentation. This technique preserves the subtalar joint, provides immediate component stability and restoration of component alignment and height, and is a cost-effective alternative to other available options and still allows for additional revision should late failure occur.

Periprosthetic aseptic osteolysis in total ankle replacement: cause and management

Osteolysis is the loss of bone secondary to a pathologic process and remains the most common cause of failure of total ankle replacement. Friction at the bearing surface results in the generation of abraded wear debris of polyethylene. These activate a biologic cascade that may result in significant bone loss and subsequent loss of fixation of the prosthesis. Revision surgery must address this loss of bone and may be achieved through either bone grafting or use of appropriate revision prosthesis components.

Revision INBONE total ankle replacement

The INBONE total ankle replacement is a unique modular ankle replacement that has the ability to serve as both a primary and a revision total ankle replacement. Despite its versatility, it may need to be revised, either because of poor patient selection, technical error, or infection. This article may be of value to those surgeons embarking on the primary placement or revision of an INBONE total ankle replacement.

Failure of the Agility total ankle replacement system and the salvage options

The Agility total ankle replacement system was the most commonly performed implant in the United States for more than 20 years and has undergone four generations and seven phases of improvement. Much attention has been placed on intraoperative complications, such as malleolar fracture; nerve or tendon injury; and incision healing-related problems, such as wound coverage and infection. However, it is the intermediate- and long-term complications (ie, aseptic osteolysis, subsidence, component loosening, and progressive malalignment) that require careful consideration, because the revision options remain limited. This article reviews the history of the Agility total ankle replacement system in detail, to understand the revision possibilities available.