Indirect spectrophotometric determination of small amounts of selenium(IV) and arsenic(V) by simple extraction using flotation columns

A micellar mediated novel method for the determination of selenium in environmental samples using a chromogenic reagent

A novel, simple, sensitive and rapid spectrophotometric method for the determination of selenium(iv) in an acidic medium using rhodamine B hydrazide (RBH) has been developed. The method is based on the micellar mediated oxidation of RBH by Se(iv) in an acidic medium to produce a pinkish violet color of rhodamine B, which was monitored spectrophotometrically at λmax 585 nm. The sensitivity of the method was found to increase when the reaction was performed in a micellar medium. Beer's law was obeyed in the concentration range of 0.002-0.032 μg mL-1. The reaction variables such as time, temperature, reagent concentration, and acidity have been optimized for the reaction. Sandell's sensitivity and molar absorptivity for the reaction system were found to be 0.00004 μg cm-2 and 42.52 × 106 L mol-1 cm-1, respectively. The developed method was successfully applied for the determination of Se(iv) in several real samples with quantitative results.

Indirect spectrophotometric determination of ultra trace amounts of selenium based on dispersive liquid-liquid microextraction-solidified floating organic drop

A novel dispersive liquid-liquid microextraction-solidified floating organic drop (DLLME-SFOD) method combined with fiber optic-linear array detection spectrophotometry has been developed for the indirect determination of selenium. The method is based on the oxidation of the I(-) to iodine by inorganic Se(IV). The produced I2 reacts with the excess of I(-) ions in acidic media to give triiodide ions. The I3(-) is then extracted into 1-undecanol by DLLME-SFOD upon the formation of an ion pair with cetyltrimethylammonium cation. The extracted ion pair is determined by measuring its absorption at 360 nm. The absorbance signal is proportional to the selenium concentration in the aqueous phase. Under optimum conditions, the method provided an enrichment factor of 250 with a detection limit of 16.0 μg L(-1) and a linear dynamic range of 40.0-1000.0 μg L(-1). The relative standard deviation was found to be 2.1% (n=7) at 100.0 μg L(-1) concentration level. The method was successfully applied to th e determination of selenium in water samples and selenium plus tablet.

Development of surfactant assisted spectrophotometric method for determination of selenium in waste water samples

A new, simple and highly selective method for spectrophotometric determination of selenium in waste water samples is described. Selenium(IV) oxidizes I(-) ions into I(2) which subsequently reacts with excess of I(-) ion in the acidic media to give tri-iodide ions (I(3)(-)), and it further reacts with cetylpyridinium cation (CP(+)) to give a violet colored species. The value of molar absorptivity of the ion-associate species in terms of selenium is 1.80 x 10(4) L mol(-1)cm(-1) at lambda(max) 510 nm. The detection limit of the method is 10 ng mL(-1) Se. The calibration curve is linear over 50-1000 ng mL(-1) Se with slope, intercept and co-relation coefficient of 0.23, -4.0 x 10(-4) and +0.99, respectively. None of the tested diverse ions interfered in the present method. The method has been tested for the determination of selenium in waste water samples.

Determination of arsenic species: A critical review of methods and applications, 2000–2003

We review recent research in the field of arsenic speciation analysis with the emphasis on significant advances, novel applications and current uncertainties.

Flotation-Separation of Aluminum from Some Water Samples Using Powdered Marble Waste and Oleic Acid

Bench-scale experiments were conducted in the laboratory, aiming to remove aluminum from water. They were based on the use of powdered marble wastes (PMW), which are inexpensive and produced in large quantity, and thus potentially cause environmental problems, as an effective inorganic sorbent and oleic acid (HOL) as surfactant. The main parameters (solution pHs, sorbent, surfactant and aluminum concentrations, shaking time, ionic strength and the presence of foreign ions) that influence the sorptive-flotation process were examined. Good results were obtained under the optimum conditions, for which nearly 100% of aluminum at pH 7 and at room temperature (approximately 25 degrees C) was removed. The procedure was successfully applied to the recovery of aluminum spiked to some natural water samples. Moreover, a sorption and flotation mechanism is suggested.