Second-order calibration high-resolution continuum source graphite furnace molecular absorption spectrometry-based determination of bromine and fluorine

In this study, we report the simultaneous determination of bromine and fluorine using Second-Order Calibration High-Resolution Continuum Source Graphite Furnace Molecular Absorption Spectrometry (HR CS MAS). The instrumental data acquired correspond to the time versus wavelength matrix per sample that were analyzed using Parallel Factor Analysis (PARAFAC), along with Unfold and N-way Partial Least Squares combined with a post-calibration step known as Residual Bilinearization (U and N PLS/RBL). Despite the significant difference in sensitivity between bromine and fluorine, all approaches provided reasonably accurate results when predicting both analytes in synthetic mixtures within a controlled environment. The relative prediction error (REP) values for bromine were 29.8 % (PARAFAC), 23.6 % (N-PLS/RBL), and 13.1 % (U-PLS/RBL), while for fluorine, the REP values were 3.4 % (PARAFAC), 3.5 % (N-PLS/RBL), and 3.2 % (U-PLS/RBL). When applying this approach to predict unknown samples, a comparison was made between the estimated nominal concentrations of fluorine and bromine obtained using either a reference method or based on labeled values or spiked mass, and those obtained using the proposed method. It was observed that PARAFAC was unable to predict the samples accurately, whereas the REP values for the prediction of bromine and fluorine using N-PLS/RBL and U-PLS/RBL methods were 19.3 %/19.2 % and 13.6 %/13.1 %, respectively.

Co-Selection of Bacterial Metal and Antibiotic Resistance in Soil Laboratory Microcosms

Accumulation of heavy metals (HMs) in agricultural soil following the application of superphosphate fertilisers seems to induce resistance of soil bacteria to HMs and appears to co-select for resistance to antibiotics (Ab). This study aimed to investigate the selection of co-resistance of soil bacteria to HMs and Ab in uncontaminated soil incubated for 6 weeks at 25 °C in laboratory microcosms spiked with ranges of concentrations of cadmium (Cd), zinc (Zn) and mercury (Hg). Co-selection of HM and Ab resistance was assessed using plate culture on media with a range of HM and Ab concentrations, and pollution-induced community tolerance (PICT) assays. Bacterial diversity was profiled via terminal restriction fragment length polymorphism (TRFLP) assay and 16S rDNA sequencing of genomic DNA isolated from selected microcosms. Based on sequence data, the microbial communities exposed to HMs were found to differ significantly compared to control microcosms with no added HM across a range of taxonomic levels.

High-resolution continuum source graphite furnace molecular absorption spectrometry compared with ion chromatography for quantitative determination of dissolved fluoride in river water samples

In addition to beneficial health effects, fluoride can also have adverse effects on humans, animals, and plants if the daily intake is strongly elevated. One main source of fluoride uptake is water, and thus several ordinances exist in Germany that declare permissible concentrations of fluoride in, for example, drinking water, mineral water, and landfill seepage water. Controlling the fluoride concentrations in aqueous matrices necessitate valid and fast analytical methods. In this work an alternative method for the determination of fluoride in surface waters based on high-resolution continuum source graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) was applied. Fluoride detection was made possible by the formation of a diatomic molecule, GaF, and detection of characteristic molecular absorption. On HR-CS-GFMAS parameter optimization, the method was adapted to surface water sample analysis. The influence of potential main matrix constituents such as Na⁺, Ca²⁺, Mg²⁺, and Cl^- as well as surface water sampling/storage conditions on the molecular absorption signal of GaF was investigated. Method validation demonstrated a low limit of detection (8.1 μg L^-1) and a low limit of quantification (26.9 μg L^-1), both sufficient for direct river water sample analysis after 0.45-μm filtration. The optimized HR-CS-GFMAS method was applied for the analysis of real water samples from the rivers Rhine and Moselle. For method validation, samples were also analyzed by an ion chromatography (IC) method. IC and HR-CS-GFMAS results both agreed well. In comparison with IC, HR-CS-GFMAS has higher sample throughput, a lower limit of detection and a lower limit of quantification, and higher selectivity, and is a very suitable method for the analysis of dissolved fluoride in river water. Graphical abstract High-resolution continuum source graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) was applied for the quantitative analysis of dissolved fluoride in river water samples from the Rhine and the Moselle. Fluoride detection was made possible by the addition of Ga for GaF formation and analysis of characteristic molecular absorption at 211.248 nm. Good agreement between HR-CS-GFMAS and ion chromatography (IC) results was obtained. In comparison with IC, HR-CS-GFMAS had a faster sample throughput and lower limit of detection and limit of quantification.

Investigation of fluorine content in PM2.5 airborne particles of Istanbul, Turkey

Fluorine determination in airborne samples is important due to its spread into the air from both natural and artificial sources. It can travel by wind over large distances before depositing on the Earth's surface. Its concentration in various matrices are limited and controlled by the regulations for causing health risks associated with environmental exposures. In this work, fluorine was determined in PM2.5 airborne samples by high-resolution continuum source electrothermal atomic absorption spectrometry. For these purpose, the PM2.5 airborne particulates were collected on quartz filters using high-volume samplers (500 L/min) in Istanbul (Turkey) for 96 h during January to June in 2 years. Then, instrumental and experimental parameters were optimized for the analyte in airborne samples. The validity of the method for the analyte was tested using standard reference material, and certified values were found in the limits of 95 % confidence level. The fluorine concentrations and meteorological conditions were compared statistically.