Time-resolved ICP-MS measurement: a new method for elemental and multiparametric analysis of single cells

Time-resolved ICP-MS analysis of mineral element contents and distribution patterns in spermatogenic cells of different types

Mineral elements play an important role in the spermatogenesis, maturation, and fertilization of sperm. It is of great scientific significance to study the role of mineral elements in spermatogenesis by accurately measuring the content of elements in different spermatogenic cells and analyzing the distribution pattern of elements in spermatogenesis. Here, time-resolved inductively coupled plasma mass spectrometry (ICP-MS) was used to analyze the content and distribution patterns of mineral elements in spermatogenic cells of different types at the single cell level. Firstly, spermatogonia, spermatocytes, round spermatids and elongating spermatids were successfully isolated from testis of mice of different weeks of age by differential adherent method and discontinuous bovine serum albumin (BSA) density gradient method. Then, signal profiles and elemental distributions of ²⁴Mg, ³¹P, ⁵²Cr, ⁵⁵Mn, ⁵⁶Fe and ⁶⁶Zn in spermatogenic cells were obtained with dwell time at 0.1 ms. Based on the results of acid digestion, we derived a formula to calculate element content in single cell from peak area for each element, and the feasibility and universality of the formula in the quantitative detection of single cell elements were verified by sperm samples to a certain extent. The detection results of element content in single cell showed that the content of ³¹P in elongating spermatids was significantly higher than that in spermatogonia, spermatocytes and round spermatids (P < 0.01), and the distribution range was wider. However, the ⁵²Cr and ⁵⁶Fe content of elongating spermatids was lower than that of spermatogonia, spermatocytes and round spermatids (P < 0.05). When spermatogonia developed into round spermatids, the contents of ⁵⁵Mn and ⁶⁶Zn in single cell increased significantly (P < 0.05), then decreased to the lowest in elongating spermatids. In addition, the significant decrease of ⁵²Cr, ⁵⁵Mn, ⁵⁶Fe and ⁶⁶Zn content in elongating spermatids also be visually observed from the center of the fitting curve of the element signal intensity distribution moving to the left. This study provides an elemental view of the changes in elemental content at various stages of spermatogenesis at the single-cell level. Time-resolved ICP-MS is used to detect mineral elements content and distribution patterns in spermatogenic cells of testis, which is helpful to better explore the stages and modes of action of various elements in spermatogenesis, and provide direct evidence for revealing the effects of element content changes on spermatogenesis and semen quality regulation.

Single-cell ICP-MS to address the role of trace elements at a cellular level

The heterogeneity properties shown by cells or unicellular organisms have led to the development of analytical methods at the single-cell level. In this sense, considering the importance of trace elements in these biological systems, the inductively coupled plasma mass spectrometer (ICP-MS) configured for analyzing single cell has presented a high potential to assess the evaluation of elements in cells. Moreover, advances in instrumentation, such as coupling laser ablation to the tandem configuration (ICP-MS/MS), or alternative mass analyzers (ICP-SFMS and ICP-TOFMS), brought significant benefits, including sensitivity improvement, high-resolution imaging, and the cell fingerprint. From this perspective, the single-cell ICP-MS has been widely reported in studies involving many fields, from oncology to environmental research. Hence, it has contributed to finding important results, such as elucidating nanoparticle toxicity at the cellular level and vaccine development. Therefore, in this review, the theory of single-cell ICP-MS analysis is explored, and the applications in this field are pointed out. In addition, the instrumentation advances for single-cell ICP-MS are addressed.

The influence of H 2 partial pressure on biogenic palladium nanoparticle production assessed by single‐cell ICP ‐mass spectrometry

The production of biogenic palladium nanoparticles (bio-Pd NPs) is widely studied due to their high catalytic activity, which depends on the size of nanoparticles (NPs). Smaller NPs (here defined as <100 nm) are more efficient due to their higher surface/volume ratio. In this work, inductively coupled plasma-mass spectrometry (ICP-MS), flow cytometry (FCM) and transmission electron microscopy (TEM) were combined to obtain insight into the formation of these bio-Pd NPs. The precipitation of bio-Pd NPs was evaluated on a cell-per-cell basis using single-cell ICP-MS (SC-ICP-MS) combined with TEM images to assess how homogenously the particles were distributed over the cells. The results provided by SC-ICP-MS were consistent with those provided by "bulk" ICP-MS analysis and FCM. It was observed that heterogeneity in the distribution of palladium over an entire cell population is strongly dependent on the Pd²⁺ concentration, biomass and partial H₂ pressure. The latter three parameters affected the particle size, ranging from 15.6 to 560 nm, and exerted a significant impact on the production of the bio-Pd NPs. The TEM combined with SC-ICP-MS revealed that the mass distribution for bacteria with high Pd content (144 fg Pd cell^-1 ) indicated the presence of a large number of very small NPs (D50 = 15.6 nm). These results were obtained at high cell density (1 × 10⁵  ± 3 × 10⁴ cells μl^-1 ) and H₂ partial pressure (180 ml H₂ ). In contrast, very large particles (D50 = 560 nm) were observed at low cell density (3 × 10⁴  ± 10 × 10² cells μl^-1 ) and H₂ partial pressure (10-100 ml H₂ ). The influence of the H₂ partial pressure on the nanoparticle size and the possibility of size-tuned nanoparticles are presented.

Multimodal Tracking of Hematopoietic Stem Cells from Young and Old Mice Labeled with Magnetic-Fluorescent Nanoparticles and Their Grafting by Bioluminescence in a Bone Marrow Transplant Model

This study proposes an innovative way to evaluate the homing and tracking of hematopoietic stem cells from young and old mice labeled with SPION_NIRF-Rh conjugated with two types of fluorophores (NIRF and Rhodamine), and their grafting by bioluminescence (BLI) in a bone marrow transplant (BMT) model. In an in vitro study, we isolated bone marrow mononuclear cells (BM-MNC) from young and old mice, and analyzed the physical-chemical characteristics of SPION_NIRF-Rh, their internalization, cell viability, and the iron quantification by NIRF, ICP-MS, and MRI. The in vivo study was performed in a BMT model to evaluate the homing, tracking, and grafting of young and old BM-MNC labeled with SPION_NIRF-Rh by NIRF and BLI, as well as the hematological reconstitution for 120 days. 5FU influenced the number of cells isolated mainly in young cells. SPION_NIRF-Rh had adequate characteristics for efficient internalization into BM-MNC. The iron load quantification by NIRF, ICP-MS, and MRI was in the order of 10⁴ SPION_NIRF-Rh/BM-MNC. In the in vivo study, the acute NIRF evaluation showed higher signal intensity in the spinal cord and abdominal region, and the BLI evaluation allowed follow-up (11-120 days), achieving a peak of intensity at 30 days, which remained stable around 10⁸ photons/s until the end. The hematologic evaluation showed similar behavior until 30 days and the histological results confirm that iron is present in almost all tissue evaluated. Our results on BM-MNC homing and tracking in the BMT model did not show a difference in migration or grafting of cells from young or old mice, with the hemogram analysis trending to differentiation towards the myeloid lineage in mice that received cells from old animals. The cell homing by NIRF and long term cell follow-up by BLI highlighted the relevance of the multimodal nanoparticles and combined techniques for evaluation.

Addressing the presence of biogenic selenium nanoparticles in yeast cells: analytical strategies based on ICP-TQ-MS

Complementary analytical strategies based on ICP-TQ-MS were used for the detection and characterization of selenium-containing nanoparticles in selenized yeast.

Recent advances in single-cell analysis by mass spectrometry

Cells are the most basic structural units that play vital roles in the functioning of living organisms. Analysis of the chemical composition and content of a single cell plays a vital role in ensuring precise investigations of cellular metabolism, and is a crucial aspect of lipidomic and proteomic studies. In addition, structural knowledge provides a better understanding of cell behavior as well as the cellular and subcellular mechanisms. However, single-cell analysis can be very challenging due to the very small size of each cell as well as the large variety and extremely low concentrations of substances found in individual cells. On account of its high sensitivity and selectivity, mass spectrometry holds great promise as an effective technique for single-cell analysis. Numerous mass spectrometric techniques have been developed to elucidate the molecular profiles at the cellular level, including electrospray ionization mass spectrometry (ESI-MS), secondary ion mass spectrometry (SIMS), laser-based mass spectrometry and inductively coupled plasma mass spectrometry (ICP-MS). In this review, the recent advances in single-cell analysis by mass spectrometry are summarized. The strategies of different ionization modes to achieve single-cell analysis are classified and discussed in detail.

New Frontiers of Metallomics: Elemental and Species-Specific Analysis and Imaging of Single Cells

Single cells represent the basic building units of life, and thus their study is one the most important areas of research. However, classical analysis of biological cells eludes the investigation of cell-to-cell differences to obtain information about the intracellular distribution since it only provides information by averaging over a huge number of cells. For this reason, chemical analysis of single cells is an expanding area of research nowadays. In this context, metallomics research is going down to the single-cell level, where high-resolution high-sensitive analytical techniques are required. In this chapter, we present the latest developments and applications in the fields of single-cell inductively coupled plasma mass spectrometry (SC-ICP-MS), mass cytometry, laser ablation (LA)-ICP-MS, nanoscale secondary ion mass spectrometry (nanoSIMS), and synchrotron X-ray fluorescence microscopy (SXRF) for single-cell analysis. Moreover, the capabilities and limitations of the current analytical techniques to unravel single-cell metabolomics as well as future perspectives in this field will be discussed.

Single Cell Level Quantification of Nanoparticle-Cell Interactions Using Mass Cytometry

Quantification of cell-associated nanoparticles (NPs) is a paramount question in both nanomedicine and nanotoxicology. Inductively coupled plasma mass spectrometry is a well-established method to resolve cell-associated (metal) NPs in bulk cell populations, however, such analysis at single cell level remains a challenge. Here we used mass cytometry, a technique that combines single cell analysis and time-of-flight mass spectrometry, to quantitatively analyze extra- and intracellular silver (Ag) in individual Ag NP exposed human T-lymphocytes. The results revealed significant population heterogeneity: for example, in lymphocytes exposed to 3 μg of 30 nm branched polyethylene imine coated Ag NPs/mL the extracellularly bound Ag varied from 79 to 560 fg and cellular uptake from 17 to 121 fg. Similar amplitude of heterogeneity was observed in cells exposed to various doses of Ag NPs with other sizes and surface coatings, demonstrating the importance of single cell analysis when studying NP-cell interactions. Although mass cytometry has some shortcomings such as inability to analyze potential transformation or dissolution of NPs in cells, we consider this method as the most promising for quantitative assessment of cell-NP interaction at single cell level.

Development of a single-cell X-ray fluorescence flow cytometer

An X-ray fluorescence flow cytometer that can determine the total metal content of single cells has been developed. Capillary action or pressure was used to load cells into hydrophilic or hydrophobic capillaries, respectively. Once loaded, the cells were transported at a fixed vertical velocity past a focused X-ray beam. X-ray fluorescence was then used to determine the mass of metal in each cell. By making single-cell measurements, the population heterogeneity for metals in the µM to mM concentration range on fL sample volumes can be directly measured, a measurement that is difficult using most analytical methods. This approach has been used to determine the metal composition of 936 individual bovine red blood cells (bRBC), 31 individual 3T3 mouse fibroblasts (NIH3T3) and 18 Saccharomyces cerevisiae (yeast) cells with an average measurement frequency of ∼4 cells min(-1). These data show evidence for surprisingly broad metal distributions. Details of the device design, data analysis and opportunities for further sensitivity improvement are described.

Time-resolved ICP-MS analysis of mineral element contents and distribution patterns in single cells

Novel single cell techniques are attracting growing interest for clinical applications, because they can elucidate the cellular diversity and heterogeneity instead of the average masked by bulk measurements. Herein, time-resolved ICP-MS for the determination of essential mineral elements in single cells has been developed and is used to analyze the contents and distribution patterns of Fe, Cu, Zn, Mn, P and S in two types of cancer cells (HeLa and A549) and one type of normal cells (16HBE). The results show that there are obvious differences in contents and distribution patterns of the elements among the three types of cells. The mass of Fe, Zn, Cu, Mn, P, and S in individual HeLa cells is significantly higher and span a broader range of values than in the single 16HBE and A549 cells. The contents of Fe, Zn, and Cu follow log-normal distributions, and Mn, P, and S follow Poisson distributions with high λ values in single HeLa cells, indicating a large cell-to-cell variance. Comparatively, the contents of Cu, Zn, P, and S in 16HBE cells show the narrowest distribution range among the three tested cells, demonstrating the homogenous distribution of the elements in the cells. The method of single cell ICP-MS (SC-ICP-MS) provides potential applications for the monitoring of the variation of mineral elements at a single cell level.

Bridging the divide between human and environmental nanotoxicology

The need to assess the human and environmental risks of nanoscale materials has prompted the development of new metrological tools for their detection, quantification and characterization. Some of these methods have tremendous potential for use in various scenarios of nanotoxicology. However, in some cases, the limited dialogue between environmental scientists and human toxicologists has hampered the full exploitation of these resources. Here we review recent progress in the development of methods for nanomaterial analysis and discuss the use of these methods in environmental and human toxicology. We highlight the opportunities for collaboration between these two research areas.

Metallomic and metalloproteomic strategies in elucidating the molecular mechanisms of metallodrugs

Advances in the mechanistic studies of metallodrugs by metallomic and metalloproteomic approaches will improve our understanding of the mechanism of action and allow more metallodrugs to be developed.