Development and Applications of Quantum Dot-based Molecularly Imprinted Polymer Composites for Optosensing of Carbofuran in Water

Highly Selective Electrochemical Sensor Based on Gadolinium Sulfide Rod-Embedded RGO for the Sensing of Carbofuran

Nowadays, a lot of pesticides have been used in the agriculture field due to the global demand for food production. Carbofuran (CF) is the most commonly used carbamate compound that is responsible for the highest toxicity to humans compared to any other pesticide used in agricultural settings. Thus, rapid, portable, and low-cost sensors are needed for the detection of CF in the environment and food samples. Herein, we have successfully developed an electrochemical sensor using a glassy carbon electrode (GCE) modified with gadolinium sulfide (Gd₂S₃) and reduced graphene oxide (RGO) composite for the detection of carbofuran (CF). A novel Gd₂S₃/RGO composite was prepared by the facile hydrothermal route and confirmed by morphological and structural analyses such as field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray (EDX), powder X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS), and also the formation mechanism of Gd₂S₃/RGO composite was discussed. The desired electrical conductivity of Gd₂S₃ was enhanced by the RGO, which was estimated from the electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Electrochemical studies demonstrated that the developed Gd₂S₃/RGO sensor was highly sensitive and selective to CF. In addition, the Gd₂S₃/RGO sensor exhibits a low detection limit (LOD) and the linear ranges were 0.0128 and 0.001-1381 μM, respectively, for CF detection under optimized experimental conditions. Moreover, we also investigated the practical applicability of the sensor for CF detection in the environment and food samples.

A review of the incorporation of QDs and imprinting technology in optical sensors – imprinting methods and sensing responses

This review aims to cover the simultaneous method of using molecularly imprinted technology and quantum dots (QDs) as well as its application in the field of optical sensors.

Preparation of Molecularly Imprinted Magnetic Graphene Oxide-Gold Nanocomposite and Its Application to the Design of Electrochemical Sensor for Determination of Epinephrine

In this study, a new molecularly imprinted polymer (MIP) based nanocomposite was synthesized then used to determine epinephrine (EPN) by the use of an electrochemical sensor modified by it. Typical techniques for the synthesis of MIP have disadvantages, such as weak binding sites, low mass transfer and low selectivity. One of the ways to improve electrochemical properties is the use of graphene oxide (GR-Ox) and modification of its surface. For this purpose, GR-Ox was initially magnetized (MGR-Ox), then its surface was coated with a silica layer, and gold nanoparticles (AuNPs) were coated on its surface. Subsequently, copolymerization of methacrylic acid (MAA) and N,N'-methylene-bis-acrylamide (MBA) in the presence of EPN was performed on the MGO-AuNPs surface. Afterwards, a selective carbon paste electrode (CPE) with synthetic nanocomposite was fabricated to detect EPN. Under optimal conditions, a linear range from 10^-8 to 5.0 × 10^-7 M was obtained for the measurement of EPN in urine and blood with a detection limit of 5 × 10^-9 M (S/N = 3).

Affinity Sensing Strategies for the Detection of Pesticides in Food

This is a review of recent affinity-based approaches that detect pesticides in food. The importance of the quantification and monitoring of pesticides is firstly discussed, followed by a description of the different approaches reported in the literature. The different sensing approaches are reported according to the different recognition element used: antibodies, aptamers, or molecularly imprinted polymers. Schemes of detection and the main features of the assays are reported and commented upon. The large number of affinity sensors recently developed and tested on real samples demonstrate that this approach is ready to be validated to monitor the amount of pesticides used in food commodities.

Development of Technologies for Sensing Ozone in Ambient Air

Ozone (O₃) gas is widely used as a strong oxidizing agent for many purposes, such as the decomposition/removal of organic contaminants and photoresist, and the deodorization/disinfection of air and water. However, ozone is highly toxic to the human body when the air concentration exceeds about 1 ppm. Therefore, there is increasing demand for simple, sensitive, reliable, and cost-effective techniques for sensing ozone gas. This article describes the features, advantages, and disadvantages of the available, practical techniques for sensing ozone gas in ambient air. The advantages of optical gas sensors as next-generation sensors is specifically introduced. The features of photoluminescent, semiconductor nanoparticles (quantum dots, QDs) as bright phosphors with the potential for various applications is further explored. Lastly, recent research results demonstrating the ozone sensitivity of photoluminescent CdSe-based core-shell quantum dots are presented. These results strongly suggest that optical ozone sensing using photoluminescent quantum dots is a promising technique.