Strategic Approaches for Highly Selective and Sensitive Detection of Hg2+ Ion Using Mass Sensitive Sensors

Here we present a quartz crystal microbalance (QCM) sensor for the highly selective and sensitive detection of Hg²⁺ ion, a toxic chemical species and a hazardous environmental contaminant. Hg²⁺ ion can be quantitatively measured based on changes in the resonance frequency of QCM following mass changes on the QCM sensor surface. The high selectivity for Hg²⁺ ion in this study can be obtained using a thymine-Hg²⁺-thymine pair, which is more stable than the adenine-thymine base pair in DNA. On the other hand, gold nanoparticles (AuNPs) and their size-enhancement techniques were used to amplify the QCM signals to increase the sensitivity for Hg²⁺ ion. With this strategic approach, the proposed QCM sensor can be used to quantitatively analyze Hg²⁺ ion with high selectivity and sensitivity. The detection limit was as low as 98.7 pM. The sensor failed to work with other metal ions at concentrations 1000-times higher than that of the Hg²⁺ ion. Finally, the recovery does not exceed 10% of the original value for the detection of Hg²⁺ ion in tap and bottled water. The results indicate acceptable accuracy and precision for practical applications.

Design of a Dual-Technology Fusion Sensor Chip with a Ring Electrode for Biosensing Application

Quartz crystal microbalance (QCM) is still a new high-precision surface detection technique. However, the adsorption quality detected by the QCM currently contains a solvent-coupling quality and cannot separate the actual biomolecular mass. Local surface plasmon resonance (LSPR) can detect the mass of biomolecules, but requires a certain contrast between the solvent of the surrounding medium and the refractive index of the adsorbed layer. The sensor chip, combining two compatible technologies, can realize the simultaneous detection of biomolecules and improve the refractive index sensitivity. The structure of our chip is to prepare the ring-shaped gold electrode on the upper surface of the quartz crystal, the circular gold electrode on the bottom surface, and the spherical gold nanoparticles arrays in the center region of the ring electrode to form a QCM/LSPR dual-technology chip. Through simulation, we finally get the size of the best energy trap by the two electrodes on the upper surface and the lower surface: the ring-top electrode with a thickness of 100 nm, an inner diameter of 4 mm, and an outer diameter of 8 mm; and the bottom electrode with a thickness of 100 nm and a radius of 6 mm. By comparing the refractive index sensitivity, we chose a spherical gold nanoparticle with a radius of 30 nm and a refractive sensitivity of 61.34 nm/RIU to design the LSPR sensor chip.