The development of screen-printed electrodes modified with gold and copper nanostructures for analysis of gunshot residue and low explosives

Due to their portability, sensitivity, and ease of use, electrochemical sensors have recently become a popular method for rapid, on-site analysis. This study presents a proof of principle for the application of modified screen-printed carbon electrodes (SPCEs) for the detection of signature metals (Pb, Sb, and Zn) commonly found in gunshot residue (GSR), as well as for the detection of nitrate/nitrite in organic GSR and low explosives. To achieve these two aims, we have examined various electrode surface modifications. For metal detection, SPCEs were modified by electrodeposition of gold to improve sensitivity. GSR samples taken from two types of cartridge cases and shooting-related surfaces were analyzed using the Au-modified SPCEs. For nitrate/nitrite analysis, further electrode surface modifications were carried out by depositing Cu(II) onto the Au-SPCEs to enhance signal through catalytic activity of the copper surfaces. Both unburned and burned forms of black powder samples, as well as burned smokeless powder, were then analyzed using the Cu/Au-SPCEs. In conclusion, due to their low cost and portability, these sensors should prove useful for rapid forensic examination.

Paper-based sensors: affordable, versatile, and emerging analyte detection platforms

Paper-based sensors, often referred to as paper-based analytical devices (PADs), stand as a transformative technology in the field of analytical chemistry. They offer an affordable, versatile, and accessible solution for diverse analyte detection. These sensors harness the unique properties of paper substrates to provide a cost-effective and adaptable platform for rapid analyte detection, spanning chemical species, biomolecules, and pathogens. This review highlights the key attributes that make paper-based sensors an attractive choice for analyte detection. PADs demonstrate their versatility by accommodating a wide range of analytes, from ions and gases to proteins, nucleic acids, and more, with customizable designs for specific applications. Their user-friendly operation and minimal infrastructure requirements suit point-of-care diagnostics, environmental monitoring, food safety, and more. This review also explores various fabrication methods such as inkjet printing, wax printing, screen printing, dip coating, and photolithography. Incorporating nanomaterials and biorecognition elements promises even more sophisticated and sensitive applications.

A dual-mode assay kit using a portable potentiostat connected to a smartphone via Bluetooth communication and a potential-power angle-based paper device susceptible for low-cost point-of-care testing of iodide and dopamine

BACKGROUND

Considering that the brain controls most of the body's activities, it is very important to measure the factors affecting its function, such as dopamine and iodide. Due to the growing population in the world, it is necessary to provide fast, cheap and accurate methods with the capability of on-site analysis and without the need for invasive sampling and operator skill. As a result, there is a strong desire to replace laboratory instruments with small sensors for point-of-care testing. Paper-based analytical devices (PADs) are one of the popular zero-cost approaches to achieve this goal.

RESULTS

We developed a simple and disposable diagnostic paper system based on electroanalytical and potential-power angle-based methods. First, we prepared an angle-based analytical system capable of performing semi-quantitative iodide analysis simply by reading the colored angle traveled. This system design is based on a channel containing complex reagents and two pencil-drawn electrodes to apply a constant voltage accelerating the anions migration. Meanwhile, a three-electrode system based on conductive pencil graphite is developed to measure dopamine concentration based on linear sweep voltammetry. For the quantitative analysis, the voltammetric data was wirelessly transmitted to a mobile device via Bluetooth communication. In this context, a power supply providing the required voltage for the migration of iodide ions, a portable potentiostat system, and a mobile application for measuring dopamine were developed. The calibration curves for I- and dopamine range from 3.5 × 10-4-47.0 × 10-4 and 10.0 × 10-6-1000.0 × 10-6 mol L-1 with LODs of 2.3 × 10-4 and 5.0 × 10-6 mol L-1, respectively.

SIGNIFICANCE AND NOVELTY

A new portable dual-mode voltage-assisted integrated PAD platform was designed for iodide and dopamine analysis. The characteristics of this device allow non-experts to carry out in-field analysis using sub-100 μL saliva sample with a time-to-result of <10 min along with reducing the overall cost and operational complexity.

Application of microfluidic technologies in forensic analysis

The application of microfluidic technology in forensic medicine has steadily expanded over the last two decades due to the favorable features of low cost, rapidity, high throughput, user-friendliness, contamination-free, and minimum sample and reagent consumption. In this context, bibliometric methods were adopted to visualize the literature information contained in the Science Citation Index Expanded from 1989 to 2022, focusing on the co-occurrence analysis of forensic and microfluidic topics. A deep interpretation of the literature was conducted based on co-occurrence results, in which microfluidic technologies and their applications in forensic medicine, particularly forensic genetics, were elaborated. The purpose of this review is to provide an impartial evaluation of the utilization of microfluidic technology in forensic medicine. Additionally, the challenges and future trends of implementing microfluidic technology in forensic genetics are also addressed.

Simple gunshot residue analyses for estimating firing distance: Investigation with four types of fabrics

This work presents two simple methods for estimating the firing distance from the gunshot residues (GSRs) on fabric targets. Four types of fabric targets, namely twill weave denim cotton-polyester (80/20), jersey knitting 100% cotton, plain weave cotton-polyester (80/20) and plain weave cotton-polyester (60/40), were employed. The firing tests were carried out using these white fabrics as targets at distances of 5-100 cm, respectively. In the first method, digital images of the black GSRs on fabric materials were recorded inside an illuminated box and the inverted gray intensity values were plotted against the firing distances. Since the plots of all fabrics are not significantly different, the estimation of firing distance employs the same exponential curve for all test fabrics. Although simple, the imaging method is not suitable for dark-colored materials. A chemical-based method was therefore developed as an alternative method. In the second method, a small disposable microfluidic paper-based analytical device (μPAD) was employed for detecting Pb(II) extracted from the GSRs. The μPAD method uses the measurement of the length of a narrow band of a pink color resulting from reaction between rhodizonate reagent and the Pb(II) extract. The plots indicated that the data of thick denim material are significantly different to other test fabrics which are much thinner. These three fabrics share the same estimation curve. However, it is recommended that the separate estimation curve for denim materials must be used. Both methods are suitable for short range firing distance, no further than 60 cm, since at greater distances the inverted gray intensity and the 'band-length' methods are unable to detect the GSRs.

Characterization of Pieces of Paper That Form Reagent Containers for Use as Portable Analytical Devices

Reagent-deposited pieces of paper were characterized by the use of a compact conductometer, a compact pH sensor, and a conventional spectrophotometer to assess their suitability for use as reagent containers. The pieces of paper were fabricated by wax printing to form a limited hydrophilic area to which a consistent volume of an aqueous reagent could be added. The pieces of paper without the reagent increased the conductivity of water gradually because of the release of sodium salts, whereas pH of NaOH decreased because of the acidity of the functional groups in the paper. Three reagents, sulfamic acid as an acid, Na₂CO₃ as a base, and BaCl₂ as a metal salt, were deposited on the pieces of paper to evaluate their ability to release from the pieces of paper. Sulfamic acid and Na₂CO₃ were released in quantities of 58 and 73% into water after 420 s, whereas 100% of BaCl₂ was released after 480 s. The conductometric titrations of NaOH, HCl, and Na₂SO₄, and the spectrophotometry of Fe²⁺ were examined using the pieces of paper that contained sulfamic acid, Na₂CO₃, BaCl₂, and 1,10-phenanthroline. Titrations using the pieces of paper suggested that the reagents were quantitatively released into the titrant, which resulted in a linear relationship between the endpoints and the equivalent points. In 120 s of soaking time, 60-70% of the reagents were released. The spectrophotometric measurements of Fe²⁺ indicated that when an excess amount of the reagents was deposited onto the pieces of paper, they nonetheless sufficiently fulfilled the role of a reagent container.

Long-term stabilization of hydrogen peroxide by poly(vinyl alcohol) on paper-based analytical devices

Stabilizing reagents that can be deposited onto paper is an important issue for researchers who depend on paper-based analytical devices (PADs), because long-term stability of the devices is essential in point-of-care testing. Here, we found that poly(vinyl alcohol) (PVA) would stabilize hydrogen peroxide placed on a paper substrate following exposure to air. Horseradish peroxidase was employed as a sample in colorimetric measurements of PADs after hydrogen peroxide and 3,3',5,5'-tetramethylbenzidine were deposited as substrates in an enzymatic reaction. The addition of PVA to hydrogen peroxide significantly suppressed its degradation. Concentrations of PVA that ranged from 0.5 to 2%, increased the duration of the stability of hydrogen peroxide, and the results for a PVA concentration of 1% approximated those of 2% PVA. Storage of the PADs at 4 °C in a refrigerator extended the stability of the hydrogen peroxide containing 2% PVA by as much as 30 days. The stability of hydrogen peroxide without PVA was degraded after one day under room temperature.