Coating extracellular matrix proteins on a (3-aminopropyl)triethoxysilane-treated glass substrate for improved cell culture

A Synergistic Overview between Microfluidics and Numerical Research for Vascular Flow and Pathological Investigations

Vascular diseases are widespread, and sometimes such life-threatening medical disorders cause abnormal blood flow, blood particle damage, changes to flow dynamics, restricted blood flow, and other adverse effects. The study of vascular flow is crucial in clinical practice because it can shed light on the causes of stenosis, aneurysm, blood cancer, and many other such diseases, and guide the development of novel treatments and interventions. Microfluidics and computational fluid dynamics (CFDs) are two of the most promising new tools for investigating these phenomena. When compared to conventional experimental methods, microfluidics offers many benefits, including lower costs, smaller sample quantities, and increased control over fluid flow and parameters. In this paper, we address the strengths and weaknesses of computational and experimental approaches utilizing microfluidic devices to investigate the rheological properties of blood, the forces of action causing diseases related to cardiology, provide an overview of the models and methodologies of experiments, and the fabrication of devices utilized in these types of research, and portray the results achieved and their applications. We also discuss how these results can inform clinical practice and where future research should go. Overall, it provides insights into why a combination of both CFDs, and experimental methods can give even more detailed information on disease mechanisms recreated on a microfluidic platform, replicating the original biological system and aiding in developing the device or chip itself.

Polymeric and biological membranes for organ-on-a-chip devices

Membranes are fundamental elements within organ-on-a-chip (OOC) platforms, as they provide adherent cells with support, allow nutrients (and other relevant molecules) to permeate/exchange through membrane pores, and enable the delivery of mechanical or chemical stimuli. Through OOC platforms, physiological processes can be studied in vitro, whereas OOC membranes broaden knowledge of how mechanical and chemical cues affect cells and organs. OOCs with membranes are in vitro microfluidic models that are used to replace animal testing for various applications, such as drug discovery and disease modeling. In this review, the relevance of OOCs with membranes is discussed as well as their scaffold and actuation roles, properties (physical and material), and fabrication methods in different organ models. The purpose was to aid readers with membrane selection for the development of OOCs with specific applications in the fields of mechanistic, pathological, and drug testing studies. Mechanical stimulation from liquid flow and cyclic strain, as well as their effects on the cell's increased physiological relevance (IPR), are described in the first section. The review also contains methods to fabricate synthetic and ECM (extracellular matrix) protein membranes, their characteristics (e.g., thickness and porosity, which can be adjusted depending on the application, as shown in the graphical abstract), and the biological materials used for their coatings. The discussion section joins and describes the roles of membranes for different research purposes and their advantages and challenges.

Influence of bone formation by composite scaffolds with different proportions of hydroxyapatite and collagen

Composite scaffolds with different proportions of hydroxyapatite (HA) and collagen (COL) produced different bone induction results.

OBJECTIVE

To examine the composite scaffolds with optimal proportion of HA and COL to achieve earlier bone induction and maximum bone formation.

METHODS

Composite scaffolds with the HA/COL weight ratio of 7:3, 3:7, 5:5 and 9:1 were prepared, as HA powder was added to collagen solution at 130℃ for 48 h. Then, the composites with different proportions of HA/COL were implanted into the extraction socket of right upper central incisor of C57BL/6 J mice. The bone formation of the extraction socket was observed by Hematoxylin-eosin (HE) and Masson-trichrome (Masson) staining at 1 and 2 weeks after operation. Five weeks later, the bone formation of extraction socket was observed by micro computed tomography (micro-CT). After MC3T3-E1 cells were co-cultured with materials of different proportions for 3 days, the number of cells attached on the surface of the materials and entering the materials were counted, and the expression of osteogenic related genes (Runx2, Ocn. Osx and Alp) was detected by reverse transcription polymerase chain reaction (RT-PCR). The composite scaffolds with different proportion of HA/COL with and without mouse bone marrow mesenchymal stem cells (BMMSCs) were implanted into the back of adult mice and cultured subcutaneously for 30 days, and observed histologically by HE and Masson staining.

RESULTS

After one week implantation with the composite HA/COL scaffolds with the weight ratio of 7:3, 3:7, 5:5 and 9:1, there was no new bone formation in the extraction socket in mouse. However, two weeks later, new bone was firstly observed in the tooth socket with the composite HA/COL scaffolds of 7:3. 5 weeks later, micro-CT scanning showed that the total amount of newly formed bone, trabecular width and bone mineral density of the HA/COL scaffolds of 7:3 were higher than the other HA/COL scaffolds (P < 0.05). After MC3T3-E1 cells were co-cultured with different composite HA/COL scaffolds for 3 days. The number of cells on the surface and inside of the HA/COL scaffolds of 7:3 was more than the other materials, and the difference was statistically significant (P < 0.05). The expression levels of Ocn and Osx of MC3T3-E1 cells were also the highest in the HA/COL scaffolds of 7:3 (P < 0.01). Bone formation was observed in the composite HA/COL scaffold of 7:3 with BMMSCs subcutaneously in mouse for 30 days, while only osteoid formation was observed in the same scaffold without BMMSCs. but bone formation was not detected in the other proportions of the HA/COL scaffolds.

SIGNIFICANCE

Compared with other proportions of HA/COL, the composite HA/COL scaffolds of 7:3 has stronger ability to promote bone formation, recruit osteoblasts to attach and enter into the scaffolds, and promote the osteogenesis of BMMSCs.

EGFR activation attenuates the mechanical threshold for integrin tension and focal adhesion formation

Mechanical forces, growth factors and the extracellular matrix all play crucial roles in cell adhesion. To understand how epidermal growth factor receptor (EGFR) impacts the mechanics of adhesion, we employed tension gauge tether (TGT) probes displaying the integrin ligand cRGDfK and quantified integrin tension. EGF exposure significantly increased spread area, cell circularity, integrated integrin tension, mechanical rupture density, radial organization and size of focal adhesions in Cos-7 cells on TGT surfaces. These findings suggest that EGFR regulates integrin tension and the spatial organization of focal adhesions. Additionally, we found that the mechanical tension threshold for outside-in integrin activation is tunable by EGFR. Parallel genetic and pharmacologic strategies demonstrated that these phenotypes are driven by ligand-dependent EGFR signaling. Our results establish a novel mechanism whereby EGFR regulates integrin activation and cell adhesion, providing control over cellular responses to the environment.This article has an associated First Person interview with the first author of the paper.

Coating Materials for Neural Stem/Progenitor Cell Culture and Differentiation

Neural stem/progenitor cells (NSPCs) have a potential to treat various neurological diseases, such as Parkinson's Disease, Alzheimer's Disease, and Spinal Cord Injury. However, the limitation of NSPC sources and the difficulty to maintain their stemness or to differentiate them into specific therapeutic cells are the main hurdles for clinical research and application. Thus, for obtaining a therapeutically relevant number of NSPCs in vitro, it is important to understand factors regulating their behaviors and to establish a protocol for stable NSPC proliferation and differentiation. Coating materials for cell culture, such as Matrigel, laminin, collagen, and other coating materials, can significantly affect NSPC characteristics. This article provides a review of coating materials for NSPC culturing in both two dimensions and three dimensions, and their functions in NSPC proliferation and differentiation, and presents a useful guide to select coating materials for researchers.

Quantified forces between HepG2 hepatocarcinoma and WA07 pluripotent stem cells with natural biomaterials correlate with in vitro cell behavior

In vitro cell culture or tissue models that mimic in vivo cellular response have potential in tissue engineering and regenerative medicine, and are a more economical and accurate option for drug toxicity tests than animal experimentation. The design of in vivo-like cell culture models should take into account how the cells interact with the surrounding materials and how these interactions affect the cell behavior. Cell-material interactions are furthermore important in cancer metastasis and tumor progression, so deeper understanding of them can support the development of new cancer treatments. Herein, the colloidal probe microscopy technique was used to quantify the interactions of two cell lines (human pluripotent stem cell line WA07 and human hepatocellular carcinoma cell line HepG2) with natural, xeno-free biomaterials of different chemistry, morphology, and origin. Key components of extracellular matrices -human collagens I and IV, and human recombinant laminin-521-, as well as wood-derived, cellulose nanofibrils -with evidenced potential for 3D cell culture and tissue engineering- were analysed. Both strength of adhesion and force curve profiles depended on biomaterial nature and cell characteristics. The successful growth of the cells on a particular biomaterial required cell-biomaterial adhesion energies above 0.23 nJ/m. The information obtained in this work supports the development of new materials or hybrid scaffolds with tuned cell adhesion properties for tissue engineering, and provides a better understanding of the interactions of normal and cancerous cells with biomaterials in the human body.

Effect of different concentration of demineralized bone powder with gellan gum porous scaffold for the application of bone tissue regeneration

The prevalence of bone-related diseases has increased, the population growth as a result of the aging phenomenon requires more effective treatments for regeneration of bone defect. Although an autogenous bone graft was used in traditional operation method, they are very inefficient in current bone defect surgery and very difficult to gather the required amount of bone for operation. It is becoming a gradually growing disease, hence there is a need for developing a new method for preparing biomimetic scaffolds. DBP (demineralized bone powder), a potent bone regeneration material, has a trace amount of ions and bone mineral component. Especially, GD (Gallus gallus var domesticus) DBP has a unique property, which has melanin, for strengthening bones, increasing ALP activity and bone mineralization, compared to other available biomaterials. For that reason, GD DBP was combined with GG (gellan gum). The material was characterized in vitro and in vivo rat model. The first priority in this work was given to assessing the attachment and proliferation rates of BMSCs following the in vivo experiment in rats. The results of 1% sample showed better osteogenic effects that can be used in clinical application after studying in larger animals for better bone regeneration and tissue engineering.

A ligand-independent integrin β1 mechanosensory complex guides spindle orientation

Control of spindle orientation is a fundamental process for embryonic development, morphogenesis and tissue homeostasis, while defects are associated with tumorigenesis and other diseases. Force sensing is one of the mechanisms through which division orientation is determined. Here we show that integrin β1 plays a critical role in this process, becoming activated at the lateral regions of the cell cortex in a ligand-independent manner. This activation is force dependent and polar, correlating with the spindle capture sites. Inhibition of integrin β1 activation on the cortex and disruption of its asymmetric distribution leads to spindle misorientation, even when cell adhesion is β1 independent. Examining downstream targets reveals that a cortical mechanosensory complex forms on active β1, and regulates spindle orientation irrespective of cell context. We propose that ligand-independent integrin β1 activation is a conserved mechanism that allows cell responses to external stimuli.

Osteoinduction and proliferation of bone-marrow stromal cells in three-dimensional poly (ε-caprolactone)/ hydroxyapatite/collagen scaffolds

BACKGROUND

Osteoinduction and proliferation of bone-marrow stromal cells (BMSCs) in three-dimensional (3D) poly(ε-caprolactone) (PCL) scaffolds have not been studied throughly and are technically challenging. This study aimed to optimize nanocomposites of 3D PCL scaffolds to provide superior adhesion, proliferation and differentiation environment for BMSCs in this scenario.

METHODS

BMSCs were isolated and cultured in a novel 3D tissue culture poly(ε-caprolactone) (PCL) scaffold coated with poly-lysine, hydroxyapatite (HAp), collagen and HAp/collagen. Cell morphology was observed and BMSC biomarkers for osteogenesis, osteoblast differentiation and activation were analyzed.

RESULTS

Scanning Electron Microscope (SEM) micrographs showed that coating materials were uniformly deposited on the surface of PCL scaffolds and BMSCs grew and aggregated to form clusters during 3D culture. Both mRNA and protein levels of the key players of osteogenesis and osteoblast differentiation and activation, including runt-related transcription factor 2 (Runx2), alkaline phosphates (ALP), osterix, osteocalcin, and RANKL, were significantly higher in BMSCs seeded in PCL scaffolds coated with HAp or HAp/collagen than those seeded in uncoated PCL scaffolds, whereas the expression levels were not significantly different in collagen or poly-lysine coated PCL scaffolds. In addition, poly-lysine, collagen, HAp/collagen, and HAp coated PCL scaffolds had significantly more viable cells than uncoated PCL scaffolds, especially scaffolds with HAp/collagen and collagen-alone coatings. That BMSCs in HAp or HAp/collagen PCL scaffolds had remarkably higher ALP activities than those in collagen-coated alone or uncoated PCL scaffolds indicating higher osteogenic differentiation levels of BMSCs in HAp or HAp/collagen PCL scaffolds. Moreover, morphological changes of BMSCs after four-week of 3D culture confirmed that BMSCs successfully differentiated into osteoblast with spread-out phenotype in HAp/collagen coated PCL scaffolds.

CONCLUSION

This study showed a proof of concept for preparing biomimetic 3D poly (ε-caprolactone)/ hydroxyapatite/collagen scaffolds with excellent osteoinduction and proliferation capacity for bone regeneration.