Thermo Sequenase DNA polymerase and T. acidophilum pyrophosphatase: new thermostable enzymes for DNA sequencing

Pathogenic CANVAS (AAGGG)n repeats stall DNA replication due to the formation of alternative DNA structures

CANVAS is a recently characterized repeat expansion disease, most commonly caused by homozygous expansions of an intronic (A2G3)n repeat in the RFC1 gene. There are a multitude of repeat motifs found in the human population at this locus, some of which are pathogenic and others benign. In this study, we conducted structure-functional analyses of the pathogenic (A2G3)n and nonpathogenic (A4G)n repeats. We found that the pathogenic, but not the nonpathogenic, repeat presents a potent, orientation-dependent impediment to DNA polymerization in vitro. The pattern of the polymerization blockage is consistent with triplex or quadruplex formation in the presence of magnesium or potassium ions, respectively. Chemical probing of both repeats in vitro reveals triplex H-DNA formation by only the pathogenic repeat. Consistently, bioinformatic analysis of S1-END-seq data from human cell lines shows preferential H-DNA formation genome-wide by (A2G3)n motifs over (A4G)n motifs. Finally, the pathogenic, but not the nonpathogenic, repeat stalls replication fork progression in yeast and human cells. We hypothesize that the CANVAS-causing (A2G3)n repeat represents a challenge to genome stability by folding into alternative DNA structures that stall DNA replication.

Estimating Copy-Number Proportions: The Comeback of Sanger Sequencing

Determination of the relative copy numbers of mixed molecular species in nucleic acid samples is often the objective of biological experiments, including Single-Nucleotide Polymorphism (SNP), indel and gene copy-number characterization, and quantification of CRISPR-Cas9 base editing, cytosine methylation, and RNA editing. Standard dye-terminator chromatograms are a widely accessible, cost-effective information source from which copy-number proportions can be inferred. However, the rate of incorporation of dye terminators is dependent on the dye type, the adjacent sequence string, and the secondary structure of the sequenced strand. These variable rates complicate inferences and have driven scientists to resort to complex and costly quantification methods. Because these complex methods introduce their own biases, researchers are rethinking whether rectifying distortions in sequencing trace files and using direct sequencing for quantification will enable comparable accurate assessment. Indeed, recent developments in software tools (e.g., TIDE, ICE, EditR, BEEP and BEAT) indicate that quantification based on direct Sanger sequencing is gaining in scientific acceptance. This commentary reviews the common obstacles in quantification and the latest insights and developments relevant to estimating copy-number proportions based on direct Sanger sequencing, concluding that bidirectional sequencing and sophisticated base calling are the keys to identifying and avoiding sequence distortions.

Halophilic archaea and their potential to generate renewable fuels and chemicals

Lignocellulosic biofuels and chemicals have great potential to reduce our dependence on fossil fuels and mitigate air pollution by cutting down on greenhouse gas emissions. Chemical, thermal, and enzymatic processes are used to release the sugars from the lignocellulosic biomass for conversion to biofuels. These processes often operate at extreme pH conditions, high salt concentrations, and/or high temperature. These harsh treatments add to the cost of the biofuels, as most known biocatalysts do not operate under these conditions. To increase the economic feasibility of biofuel production, microorganisms that thrive in extreme conditions are considered as ideal resources to generate biofuels and value-added products. Halophilic archaea (haloarchaea) are isolated from hypersaline ecosystems with high salt concentrations approaching saturation (1.5-5 M salt concentration) including environments with extremes in pH and/or temperature. The unique traits of haloarchaea and their enzymes that enable them to sustain catalytic activity in these environments make them attractive resources for use in bioconversion processes that must occur across a wide range of industrial conditions. Biocatalysts (enzymes) derived from haloarchaea occupy a unique niche in organic solvent, salt-based, and detergent industries. This review focuses on the use of haloarchaea and their enzymes to develop and improve biofuel production. The review also highlights how haloarchaea produce value-added products, such as antibiotics, carotenoids, and bioplastic precursors, and can do so using feedstocks considered "too salty" for most microbial processes including wastes from the olive-mill, shell fish, and biodiesel industries.

Evaluation of random amplified polymorphic DNA and multiple-locus variable number tandem repeat analyses for Mycoplasma cynos

Mycoplasma spp. can cause diseases of the respiratory system as well as urogenital infections, infertility, and anemia. The members of this genus have a low G + C content compared to other bacteria. Because primers used in the random amplified polymorphic DNA (RAPD) technique are only 10 bp long and have high GC content, this method can be inadequate for genotyping Mycoplasma spp. isolates. The aim of this study was to develop and evaluate multiple-locus variable number tandem repeat analysis (MLVA) and two-primer RAPD (TP-RAPD) procedures for subtyping Mycoplasma cynos isolates. A total of 55 M. cynos isolates obtained from 162 bronchoalveolar lavage fluid samples from shelter and pet dogs were used in this study. Seventy-four tandem repeat regions were detected in the M. cynos genome, and two of these loci were determined to be suitable and used for development of the MLVA scheme. The results of variable number tandem repeat (VNTR) analysis and TP-RAPD-PCR were compared with RAPD-PCR. The discriminatory power of TP-RAPD-PCR (Hunter-Gaston diversity index [HGDI] = 0.84) was higher than those of RAPD-PCR (HGDI = 0.727), VNTR1 (HGDI = 0.8), and VNTR3 (HGDI = 0.757). We observed that the TP-RAPD-PCR and MLVA methods provide clearer data and are more successful in determining genetic diversity, in contrast to the RAPD-PCR method for this species.

MICB Allele Genotyping on Microarrays by Improving the Specificity of Extension Primers

Major histocompatibility complex (MHC) class I chain-related gene B (MICB) encodes a ligand for activating NKG2D that expressed in natural killer cells, γδ T cells, and αβ CD8⁺ T cells, which is associated with autoimmune diseases, cancer, and infectious diseases. Here, we have established a system for genotyping MICB alleles using allele-specific primer extension (ASPE) on microarrays. Thirty-six high quality, allele-specific extension primers were evaluated using strict and reliable cut-off values using mean fluorescence intensity (MFI), whereby an MFI >30,000 represented a positive signal and an MFI <10,000 represented a negative signal. Eight allele-specific extension primers were found to be false positives, five of which were improved by adjusting their length, and three of which were optimized by refractory modification. The MICB alleles (*002:01, *003, *005:02/*010, *005:03, *008, *009N, *018, and *024) present in the quality control panel could be exactly defined by 22 allele-specific extension primers. MICB genotypes that were identified by ASPE on microarrays were in full concordance with those identified by PCR-sequence-based typing. In conclusion, we have developed a method for genotyping MICB alleles using ASPE on microarrays; which can be applicable for large-scale single nucleotide polymorphism typing studies of population and disease associations.

Archaeal Inorganic Pyrophosphatase Displays Robust Activity under High-Salt Conditions and in Organic Solvents

Soluble inorganic pyrophosphatases (PPAs) that hydrolyze inorganic pyrophosphate (PPi) to orthophosphate (Pi) are commonly used to accelerate and detect biosynthetic reactions that generate PPi as a by-product. Current PPAs are inactivated by high salt concentrations and organic solvents, which limits the extent of their use. Here we report a class A type PPA of the haloarchaeon Haloferax volcanii (HvPPA) that is thermostable and displays robust PPi-hydrolyzing activity under conditions of 25% (vol/vol) organic solvent and salt concentrations from 25 mM to 3 M. HvPPA was purified to homogeneity as a homohexamer by a rapid two-step method and was found to display non-Michaelis-Menten kinetics with a Vmax of 465 U · mg(-1) for PPi hydrolysis (optimal at 42°C and pH 8.5) and Hill coefficients that indicated cooperative binding to PPi and Mg(2+). Similarly to other class A type PPAs, HvPPA was inhibited by sodium fluoride; however, hierarchical clustering and three-dimensional (3D) homology modeling revealed HvPPA to be distinct in structure from characterized PPAs. In particular, HvPPA was highly negative in surface charge, which explained its extreme resistance to organic solvents. To demonstrate that HvPPA could drive thermodynamically unfavorable reactions to completion under conditions of reduced water activity, a novel coupled assay was developed; HvPPA hydrolyzed the PPi by-product generated in 2 M NaCl by UbaA (a "salt-loving" noncanonical E1 enzyme that adenylates ubiquitin-like proteins in the presence of ATP). Overall, we demonstrate HvPPA to be useful for hydrolyzing PPi under conditions of reduced water activity that are a hurdle to current PPA-based technologies.

Microarrays for high-throughput genotyping of MICA alleles using allele-specific primer extension

The role of major histocompatibility complex (MHC) class I chain-related gene A (MICA), a ligand of NKG2D, has been defined in human diseases by its allele associations with various autoimmune diseases, hematopoietic stem cell transplantation (HSCT) and cancer. This study describes a practical system to develop MICA genotyping by allele-specific primer extension (ASPE) on microarrays. From the results of 20 control primers, strict and reliable cut-off values of more than 30,000 mean fluorescence intensity (MFI) as positive and less than 3000 MFI as negative, were applied to select high-quality specific extension primers. Among 55 allele-specific primers, 44 primers could be initially selected as optimal primer. Through adjusting the length, six primers were improved. The other failed five primers were corrected by refractory modification. MICA genotypes by ASPE on microarrays showed the same results as those by nucleotide sequencing. On the basis of these results, ASPE on microarrays may provide high-throughput genotyping for MICA alleles for population studies, disease-gene associations and HSCT.

Improved nucleotide selectivity and termination of 3'-OH unblocked reversible terminators by molecular tuning of 2-nitrobenzyl alkylated HOMedU triphosphates

We describe a novel 3′-OH unblocked reversible terminator with the potential to improve accuracy and read-lengths in next-generation sequencing (NGS) technologies. This terminator is based on 5-hydroxymethyl-2′-deoxyuridine triphosphate (HOMedUTP), a hypermodified nucleotide found naturally in the genomes of numerous bacteriophages and lower eukaryotes. A series of 5-(2-nitrobenzyloxy)methyl-dUTP analogs (dU.I–dU.V) were synthesized based on our previous work with photochemically cleavable terminators. These 2-nitrobenzyl alkylated HOMedUTP analogs were characterized with respect to incorporation, single-base termination, nucleotide selectivity and photochemical cleavage properties. Substitution at the α-methylene carbon of 2-nitrobenzyl with alkyl groups of increasing size was discovered as a key structural feature that provided for the molecular tuning of enzymatic properties such as single-base termination and improved nucleotide selectivity over that of natural nucleotides. 5-[(S)-α-tert-Butyl-2-nitrobenzyloxy]methyl-dUTP (dU.V) was identified as an efficient reversible terminator, whereby, sequencing feasibility was demonstrated in a cyclic reversible termination (CRT) experiment using a homopolymer repeat of ten complementary template bases without detectable UV damage during photochemical cleavage steps. These results validate our overall strategy of creating 3′-OH unblocked reversible terminator reagents that, upon photochemical cleavage, transform back into a natural state. Modified nucleotides based on 5-hydroxymethyl-pyrimidines and 7-deaza-7-hydroxymethyl-purines lay the foundation for development of a complete set of four reversible terminators for application in NGS technologies.

An accurate fluorescent assay for quantifying the extent of RNA editing

Recent data suggest that small differences in editing efficiency can have significant functional consequences. Here we present a fluorescent poisoned primer extension assay that is capable of distinguishing editing efficiency differences as low as 5%. For a poison-primer extension assay to be accurate, the extension product must stop at the intended base. Sometimes, however, it runs beyond. We tested the effect of specific enzyme-terminator combinations on the amount of run through. In the worst cases it accounted for 70% of the total signal, and in the best cases <5%. In addition, the specific base can affect run through, with G producing the least. The accuracy of the assay was demonstrated on templates derived from mixed plasmids and then verified on two biological substrates. Using either a K(+) channel mRNA that contains a site for adenosine deamination or an ndhB mRNA that contains a site for cytidine deamination, the editing efficiency predicted by the assay closely matched that predicted by bulk sequencing of individual cDNA clones. This assay should prove useful for analyzing small changes in editing efficiency or for quantifying single nucleotide polymorphisms.

Characterization of the Family I inorganic pyrophosphatase from Pyrococcus horikoshii OT3

A gene encoding for a putative Family I inorganic pyrophosphatase (PPase, EC 3.6.1.1) from the hyperthermophilic archaeon Pyrococcus horikoshii OT3 was cloned and the biochemical characteristics of the resulting recombinant protein were examined. The gene (Accession No. 1907) from P. horikoshii showed some identity with other Family I inorganic pyrophosphatases from archaea. The recombinant PPase from P. horikoshii (PhPPase) has a molecular mass of 24.5 kDa, determined by SDS-PAGE. This enzyme specifically catalyzed the hydrolysis of pyrophosphate and was sensitive to NaF. The optimum temperature and pH for PPase activity were 70 degrees C and 7.5, respectively. The half-life of heat inactivation was about 50 min at 105 degrees C. The heat stability of PhPPase was enhanced in the presence of Mg2+. A divalent cation was absolutely required for enzyme activity, Mg2+ being most effective; Zn2+, Co2+ and Mn2+ efficiently supported hydrolytic activity in a narrow range of concentrations (0.05-0.5 mM). The K(m) for pyrophosphate and Mg2+ were 113 and 303 microM, respectively; and maximum velocity, V(max), was estimated at 930 U mg(-1).

Industrial relevance of thermophilic Archaea

The dramatic increase of newly isolated extremophilic microorganisms, analysis of their genomes and investigations of their enzymes by academic and industrial laboratories demonstrate the great potential of extremophiles in industrial (white) biotechnology. Enzymes derived from extremophiles (extremozymes) are superior to the traditional catalysts because they can perform industrial processes even under harsh conditions, under which conventional proteins are completely denatured. In particular, enzymes from thermophilic and hyperthermophilic Archaea have industrial relevance. Despite intensive investigations, our knowledge of the structure-function relationships of their enzymes is still limited. Information concerning the molecular properties of their enzymes and genes has to be obtained to be able to understand the mechanisms that are responsible for catalytic activity and stability at the boiling point of water.

Extreme environments as a resource for microorganisms and novel biocatalysts

The steady increase in the number of newly isolated extremophilic microorganisms and the discovery of their enzymes by academic and industrial institutions underlines the enormous potential of extremophiles for application in future biotechnological processes. Enzymes from extremophilic microorganisms offer versatile tools for sustainable developments in a variety of industrial application as they show important environmental benefits due to their biodegradability, specific stability under extreme conditions, improved use of raw materials and decreased amount of waste products. Although major advances have been made in the last decade, our knowledge of the physiology, metabolism, enzymology and genetics of this fascinating group of extremophilic microorganisms and their related enzymes is still limited. In-depth information on the molecular properties of the enzymes and their genes, however, has to be obtained to analyze the structure and function of proteins that are catalytically active around the boiling and freezing points of water and extremes of pH. New techniques, such as genomics, metanogenomics, DNA evolution and gene shuffling, will lead to the production of enzymes that are highly specific for countless industrial applications. Due to the unusual properties of enzymes from extremophiles, they are expected to optimize already existing processes or even develop new sustainable technologies.

Construction of a chimeric thermostable pyrophosphatase to facilitate its purification and immobilization by using the choline-binding tag

The thermophilic inorganic pyrophosphatase (Pyr) from Thermus thermophilus has been produced in Escherichia coli fused to the C terminus of the choline-binding tag (ChB tag) derived from the choline-binding domain (ChBD) of pneumococcal LytA autolysin. The chimeric ChBD-Pyr protein retains its thermostable activity and can be purified in a single step by DEAE-cellulose affinity chromatography. Pyr can be further released from the ChBD by thrombin, using the specific protease recognition site incorporated in the C terminus of this tag. Remarkably, the ChB tag provides a selective and very strong thermostable noncovalent immobilization of ChBD-Pyr in the DEAE-cellulose matrix. The binding of choline or choline analogues, such as DEAE, confers a high thermal stability to this tag; therefore, the immobilized chimeric enzyme can be assayed at high temperature without protein leakage, demonstrating the usefulness of the ChB tag for noncovalent immobilization of thermophilic proteins. Moreover, ChBD-Pyr can be purified and immobilized in a single step on commercial DEAE-cellulose paper. The affinity of the ChB tag for this versatile solid support can be very helpful in developing many biotechnological applications.

Role of excess inorganic pyrophosphate in primer-extension genotyping assays

We have developed and genotyped >15,000 SNP assays by using a primer extension genotyping assay with fluorescence polarization (FP) detection. Although the 80% success rate of this assay is similar to those of other SNP genotyping assays, we wanted to determine the reasons for the failures and find ways to improve the assay. We observed that the failed assays fell into three general patterns: PCR failure, excess of heterozygous genotypes, and loss of FP signal for one of the dye labels. After analyzing several hundred failed assays, we concluded that 5% of the assays had PCR failure and had to be redesigned. We also discovered that the other two categories of failures were due to misincorporation of one of the dye-terminators during the primer extension reaction as a result of primer shortening with a reverse reaction involving inorganic pyrophosphate, and to the quenching of R110-terminator after its incorporation onto the SNP primer. The relatively slow incorporation of R110 acycloterminators by AcycloPol compounds the problem with the R110 label. In this report, we describe the source of the problems and simple ways to correct these problems by adding pyrophosphatase, using quenching as part of the analysis, and replacing R110 by Texas red as one of the dye labels. With this new protocol, we have achieved approximately 95% success rate in assay development without the need for optimization.

Biotechnological uses of archaeal extremozymes

Archaea have developed a variety of molecular strategies to survive the often harsh environments in which they exist. Although the rules that allow archaeal enzymes to fulfill their catalytic functions under extremes of salinity, temperature or pressure are not completely understood, the stability of these extremophilic enzymes, or extremozymes, in the face of adverse conditions has led to their use in a variety of biotechnological applications in which such tolerances are advantageous. In the following, examples of commercially important archaeal extremozymes are presented, potentially useful archaeal extremozyme sources are identified and solutions to obstacles currently hindering wider use of archaeal extremozymes are discussed.

Crystal structure of the hyperthermophilic inorganic pyrophosphatase from the archaeon Pyrococcus horikoshii

A homolog to the eubacteria inorganic pyrophosphatase (PPase, EC 3.6.1.1) was found in the genome of the hyperthermophilic archaeon Pyrococcus horikoshii. This inorganic pyrophosphatase (Pho-PPase) grows optimally at 88 degrees C. To understand the structural basis for the thermostability of Pho-PPase, we have determined the crystal structure to 2.66 A resolution. The crystallographic asymmetric unit contains three monomers related by approximate threefold symmetry, and a hexamer is built up by twofold crystallographic symmetry. The main-chain fold of Pho-PPase is almost identical to that of the known crystal structure of the model from Sulfolobus acidocaldarius. A detailed comparison of the crystal structure of Pho-PPase with related structures from S. acidocaldarius, Thermus thermophilus, and Escherichia coli shows significant differences that may account for the difference in their thermostabilities. A reduction in thermolabile residues, additional aromatic residues, and more intimate association between subunits all contribute to the larger thermophilicity of Pho-PPase. In particular, deletions in two loops surrounding the active site help to stabilize its conformation, while ion-pair networks unique to Pho-PPase are located in the active site and near the C-terminus. The identification of structural features that make PPases more adaptable to extreme temperature should prove helpful for future biotechnology applications.

Efficient and high fidelity incorporation of dye-terminators by a novel archaeal DNA polymerase mutant

We examined the molecular basis of ddNTP selectivity in archaeal family B DNA polymerases by randomly mutagenizing the gene encoding Thermococcus sp. JDF-3 DNA polymerase and screening mutant libraries for improved ddNTP incorporation. We identified two mutations, P410L and A485T, that improved ddNTP uptake, suggesting the contribution of P410 and A485 to ddNTP/dNTP selectivity in archaeal DNA polymerases. The importance of A485 was identified previously in mutagenesis studies employing Pfu (A486) and Vent (A488) DNA polymerases, while the contribution of P410 to ddNTP/dNTP selectivity has not been reported. We demonstrate that a combination of mutations (P410L/A485T) has an additive effect in improving ddNTP incorporation by a total of 250-fold. To assess the usefulness of the JDF-3 P410L/A485T in fluorescent-sequencing applications, we compared the archaeal mutant to Taq F667Y with respect to fidelity and kinetic parameters for DNA and dye-ddNTPs. Although the Taq F667Y and JDF-3 P410L/A485T mutants exhibit similar K(m) and V(max) values for dye-ddNTPs in single-base extension assays, the archaeal mutant exhibits higher fidelity due to a reduced tendency to form certain (ddG:dT, ddT:dC) mispairs. DNA polymerases exhibiting higher insertion fidelity are expected to provide greater accuracy in SNP frequency determinations by single-base extension and in multiplex minisequencing assays.

Pyrophosphorolysis-activatable oligonucleotides may facilitate detection of rare alleles, mutation scanning and analysis of chromatin structures

Pyrophosphorolysis-activated polymerization (PAP) was initially developed to enhance the specificity of allele-specific PCR for detection of known mutations in the presence of a great excess of wild-type allele. The high specificity of PAP derives from the serial coupling of pyrophosphorolysis-mediated activation of a pyrophosphorolysis-activatable oligonucleotide (P*) followed by extension of the activated oligonucleotide. Herein, we demonstrate that genetically engineered DNA polymerases greatly improve the efficiency of PAP, making it a practical technique for detection of rare mutations. We also show that P* oligonucleotides have the novel and unexpected property of high sensitivity to mismatches throughout at least the 16 3'-terminal nucleotides. Thus, PAP constitutes a technology platform of potential utility whenever high specificity is required along the length of an oligonucleotide.

Expression in Escherichia coli of the thermostable inorganic pyrophosphatase from the Aquifex aeolicus and purification and characterization of the recombinant enzyme

The gene encoding the inorganic pyrophosphatase from a hyperthermophilic bacterium, Aquifex aeolicus (Aae), was amplified by PCR. Then, the gene was overexpressed in Escherichia coli using a pJR-based expression plasmid, pAIPD. The recombinant Aae pyrophosphatase was purified 16.2-fold with a 53.4% yield and a specific activity of 34 U/mg protein by a combination of heating (to denature E. coli proteins) and two steps of DEAE-Sephacel column chromatography (nonabsorbed enzyme at pH 7.3 and absorbed enzyme at pH 8.0). This enzyme has an approximate molecular mass of 105,000 Da and consists of four subunits, each with a molecular mass of 24,500 Da. The enzyme shows the optimal activity in the pH range 7.5-8.0. The enzyme was stable at 80-95 degrees C. A divalent cation was absolutely required for the enzyme activity, Mg(2+) being most effective.

Analogs of guanine nucleoside triphosphates for sequencing applications

We have synthesized more than 30 different deoxyribonucleosides and triphosphates with modifications either in the base or the phosphate moiety as analogs of 2'-dGTP for DNA sequencing applications. All the modified nucleoside triphosphates were tested as substrates for DNA polymerases, including Sequenase T7 DNA polymerase or Thermo Sequenase DNA polymerase. Two of the analogs, 7-ethyl-7-deaza-dGTP and 7-hydroxymethyl-7-deaza-dGTP meet our requirements as better sequencing reagents.

Improving dideoxynucleotide-triphosphate utilisation by the hyper-thermophilic DNA polymerase from the archaeon Pyrococcus furiosus

Polymerases from the Pol-I family which are able to efficiently use ddNTPs have demonstrated a much improved performance when used to sequence DNA. A number of mutations have been made to the gene coding for the Pol-II family DNA polymerase from the archaeon Pyrococcus furiosus with the aim of improving ddNTP utilisation. 'Rational' alterations to amino acids likely to be near the dNTP binding site (based on sequence homologies and structural information) did not yield the desired level of selectivity for ddNTPs. However, alteration at four positions (Q472, A486, L490 and Y497) gave rise to variants which incorporated ddNTPs better than the wild type, allowing sequencing reactions to be carried out at lowered ddNTP:dNTP ratios. Wild-type Pfu-Pol required a ddNTP:dNTP ratio of 30:1; values of 5:1 (Q472H), 1:3 (L490W), 1:5 (A486Y) and 5:1 (Y497A) were found with the four mutants; A486Y representing a 150-fold improvement over the wild type. A486, L490 and Y497 are on analpha-helix that lines the dNTP binding groove, but the side chains of the three amino acids point away from this groove; Q472 is in a loop that connects this alpha-helix to a second long helix. None of the four amino acids can contact the dNTP directly. Therefore, the increased selectivity for ddNTPs is likely to arise from two factors: (i) small overall changes in conformation that subtly alter the nucleotide triphosphate binding site such that ddNTPs become favoured; (ii) interference with a conformational change that may be critical both for the polymerisation step and discrimination between different nucleotide triphosphates.

Improved DNA Sequencing Accuracy and Detection of Heterozygous Alleles Using Manganese Citrate and Different Fluorescent Dye Terminators

The use of dideoxynucleotide triphosphates labeled with different fluorescent dyes (dye terminators) is the most versatile method for automated DNA sequencing. However, variation in peak heights reduces base-calling accuracy and limits heterozygous allele detection, favoring use of dye-labeled primers for this purpose. We have discovered that the addition of a manganese salt to the PE Applied Biosystems dye-terminator sequencing kits overcomes these limitations for the older rhodamine dyes as well as the more recent dichloro-rhodamine dyes (dRhodamine and BigDyes). Addition of manganese to reactions containing dRhodamine-based dye terminators produced the highest base-calling accuracy. This combination resulted in the most uniform electropherogram profiles, superior to those produced by BigDye terminators and published for dye primers, and facilitated detection of heterozygous alleles.

High performance DNA sequencing, and the detection of mutations and polymorphisms, on the Clipper sequencer

The Visible Genetics Clipper sequencer is a new platform for automated DNA sequencing which employs disposable MicroCel cassettes and 50 microm thick polyacrylamide gels. Two DNA ladders can be analyzed simultaneously in each of 16 lanes on a gel, after labeling with far-red absorbing dyes such as Cy5 and Cy5.5. This allows a simultaneous bidirectional sequencing of four templates. We have evaluated the Clipper sequencer, by cycle-sequencing of an M13 single-stranded DNA standard, and by coupled amplification and sequencing (CLIP) of reverse-transcribed human immunodeficiency virus (HIV-1) RNA standards and clinical patient samples. (i) Limitations of instrument. We have examined basic instrument parameters such as detector stability, background, digital sampling rate, and gain. With proper usage, the optical and electronic subsystems of the Clipper sequencer do not limit the data collection or sequence-determination processes. (ii) Limitations of gel performance. We have also examined the physics of DNA band separation on 50 microm thick MicroCel gels. We routinely obtain well-resolved sequence which can be base-called with 98.5% accuracy to position approximately 450 on an 11 cm gel, and to position approximately 900 on a 25 cm gel. Resolution on 5 and 11 cm gels ultimately is limited by a sharp decrease in spacing between adjacent bands, in the biased reptation separation regime. Fick's (thermal) diffusion appears to be of minor importance on 6 cm or 11 cm gels, but becomes an additional resolution-limiting factor on 25 cm gels. (iii) Limitations of enzymology. Template quality, primer nesting, choice of DNA polymerase, and choice between dye primers and dye terminators are key determinants of the ability to detect mutations and polymorphisms on the Clipper sequencer, as on other DNA sequencers. When CLIP is used with dye-labeled primers and a DNA polymerase of the F667Y, delta(5'--> 3' exo) class, we can routinely detect single-nucleotide mutations and polymorphisms over the 0.35-0.65 heterozygosity range. We present an example of detecting therapeutically relevant mutations in a clinical HIV-1 RNA isolate.

Recognition sites of 3'-OH group by T7 RNA polymerase and its application to transcriptional sequencing

When analyzing the elongation mechanisms in T7 RNA polymerase (T7 RNAP)by using site-directed mutagenesis and a protein expression system, we identified the recognition sites of the rNTP 3'-OH group in T7 RNAP. On the basis of three-dimensional crystal structure analysis, we selected and analyzed six candidate sites interacting with the 3'-OH group of rNTP in T7 RNAP. We found that the Phe-644 and Phe-667 sites are responsible for the high selectivity of T7 RNAP for rNTPs. Also, we constructed the protein mutations of these residues, F644Y and F667Y, which display a >200-fold higher affinity than the wild type for 3'-dNTPs. These findings indicate that the phenylalanine residues of 644 and 667 specifically interact with the 3'-OH group. Thus, these mutants, F644Y and F667Y, with incorporation of 3'-dNTP terminators, which is similar to native rNTPs, can offer low backgrounds and equal intensities of the sequencing ladders in our method, called "transcriptional sequencing. "