Formulation and clinical investigation of optimized vinpocetine lyoplant-tabs: new strategy in development of buccal solid dosage form

Fabrication, optimization, and evaluation of lyophilized lacidipine-loaded fatty-based nanovesicles as orally fast disintegrating sponge delivery system

Lacidipine (LCD) is a potent antihypertensive agent. Fatty-based nanovesicles (FNVs) were designed to improve LCD low solubility and bioavailability. LCD-FNVs were formulated according to different proportions of cetyl alcohol, cremophor®RH40, and oleic acid adopting Box-Behnken Design. The optimized LCD-FNVs, composed of cetyl alcohol 48.4 mg, cremophor®RH40 120 mg, and oleic acid 40 mg, showed minimum vesicle size (124.8 nm), maximum entrapment efficiency % (91.04 %) and zeta potential (-36.3 mV). The optimized FNVs were then used to formulate the lyophilized orally fast-disintegrating sponge (LY-OFDS). The LY-OFDS had a very short disintegration time (58 sec), remarkably high % drug release (100 % after 15 mins), and increased the drug transbuccal permeation by over 9.5-fold compared to the drug suspension. In-vivo evaluation of antihypertensive activity in rats showed that the LY-OFDS reduced blood pressure immediately after 5 min and reached normal blood pressure 4.5-fold faster than the marketed oral tablets. In the In-vivo pharmacokinetic study in rabbits, the LY-OFDS showed 4.7-fold higher bioavailability compared with the marketed oral tablet. In conclusion, the LY-OFDS loaded with LCD-FNVs is a safe, and non-invasive approach that can deliver LCD effectively to the blood circulation via the buccal mucosa giving superior immediate capabilities of lowering high blood pressure and increasing the drug bioavailability.

Attenuated effects of topical vinpocetine in an imiquimod-induced mouse model of psoriasis

Psoriasis is an uncontrolled, long-lasting inflammatory dermatosis distinguished by thickened, erythematous, and flaky skin lesions. Massive amounts of inflammatory cytokines are produced when immune system imbalances are driven by genetic and environmental triggers. Vinpocetine (VNP), a man-made analogue of the compound vincamine found in the dwarf periwinkle herb, has robust anti-inflammatory, immunomodulatory, and anti-oxidative effects; alleviates the epidermal penetration of immune cells, such as eosinophils and neutrophils; and abolishes the generation of pro-inflammatory molecules.

Objective

This study was aimed at exploring the effects of long-term topical VNP, both alone and co-administered with clobetasol propionate, in an imiquimod-induced mouse model of psoriasiform dermatitis.

Methods

The study protocol consisted of 48 Swiss albino mice, randomly divided into six groups of eight mice each. In group I, petroleum jelly was administered daily for 8 days. In group II, imiquimod was administered topically at 62.5 mg daily for 8 days. In groups III, VI, V, and VI, 0.05% clobetasol propionate, 1% VNP, 3% VNP, and 3% VNP plus 0.05% clobetasol were administered topically for an additional 8 days after the induction, thus resulting in a total trial length of 16 days.

Results

Topical VNP at various doses alleviated the severity of imiquimod-induced psoriatic lesions-including erythema, silvery-white scaling, and thickening-and reversed the histopathological abnormalities. Moreover, imiquimod-exposed animals treated with VNP showed markedly diminished concentrations of inflammatory biomarkers, including tumour necrosis factor-α, interleukin (IL)-8, IL-17A, IL-23, IL-37, nuclear factor-kappa B (NF-κB), and transforming growth factor-β1.

Conclusion

This research provides new evidence that VNP, alone and in combination with clobetasol, may serve as a potential adjuvant for long-term management of autoimmune and autoinflammatory skin diseases, particularly psoriasis, by attenuating psoriatic lesion severity, suppressing cytokine generation, and limiting NF-κB-mediated inflammation.

Development and optimization of in-situ gel containing chitosan nanoparticles for possible nose-to-brain delivery of vinpocetine

Vinpocetine (VIN), a derivative of vincamine found in the vinca plant, widens blood vessels in the brain and has been shown to improve cognitive function, memory, and cerebrovascular disorders. Nevertheless, the clinical utility of VIN is constrained by factors such as low oral bioavailability owing to the first-pass metabolism that often demands frequent dosing of 3-4 tablets/day. In this regard, the present work aimed to develop VIN-loaded chitosan nanoparticles (VIN-CH-NPs) to surmount these limitations and in view to enhance delivery to the brain of VIN by minimizing systemic exposure. The chitosan (CH) nanoparticles (NP) were developed by ionotropic gelation technique employing tripolyphosphate (TPP) as a cross-linking agent. Employing Design of Experiments (DoE), the effect of CH and TPP concentrations and stirring speed were systematically optimized using Box Behnken design (BBD). The optimized batch of nanoparticles displayed a particle size, zeta potential, entrapment efficiency, and drug loading of 130.6 ± 8.38 nm, +40.81 ± 0.11 mV, 97.56 ± 0.04 %, and 61 ± 0.89 %, respectively. Fourier Transform Infrared Spectroscopy indicated the chemical integrity of the drug ruling out the interaction between the VIN and excipients used. DSC and PXRD data indicated that reduction of the crystallinity of VIN in the chitosan matrix. These VIN-CH-NPs manifested good stability, exhibiting an almost spherical morphology. To mitigate rapid mucociliary clearance upon intranasal administration, the optimized VIN-CH-NPs were incorporated into thermosensitive in situ gel (VIN-CHN-ISG). It was observed that the in-situ gel loaded with nanoparticles was opalescent with a pH level of 5.3 ± 0.38. It was also noted that the gelation temperature was 32 ± 0.89 °C, and the gelation time was approximately 15 s. The drug delivery to the brain through the nasal application of optimized VIN-NPs in situ gel was assessed in rats. The results indicated significant nasal application of the in-situ gel nearly doubled the Cmax (P < 0.05) and AUC0-t (P < 0.05) in the brain compared to oral administration. Nasal administration improved drug delivery to the brain by reducing systemic exposure to VIN. A histopathological study of the nasal mucosa revealed no irritation or toxicity, making it safe for nasal administration. These findings suggest that the developed NPs in-situ gel effectively targeted vinpocetine to the brain through the nasal pathway, providing a potential therapeutic strategy for managing Alzheimer's disease.

Incorporating sodium deoxycholate endorsed the buccal administration of avanafil to heighten the bioavailability and duration of action

The highly effective phosphodiesterase type 5 inhibitor (avanafil; AVA) is routinely prescribed to treat erectile dysfunction. The drug has poor oral bioavailability and undergoes a significant first-pass metabolism. Therefore, altering AVA's solubility and choosing a different delivery method may boost its effectiveness. Nine different solid dispersion formulations utilizing polyvinylpyrrolidone (PVP) at three different ratios were prepared and characterized. The Box-Behnken design was employed to optimize AVA-buccal tablets. The pre-compression and post-compression characteristics of the tablets were assessed. The mucoadhesion strength of the optimized tablet was investigated using cow buccal mucosal tissue. In vivo performance of the optimized tablets was examined on human volunteers compared to the commercial tablets. PVP K90 at 2:1 drug to polymer ratio showed the highest solubilization capacity. The mucoadhesive polymer type and percentage and the mucopenetration enhancer percentage were significantly affect the mucoadhesion strength, tablet hardness, and the initial and cumulative AVA released from the prepared tablets. The optimized AVA-buccal tablet showed 4.96 folds increase in the mean residence time, higher plasma exposure, and an improvement in the relative bioavailability of AVA by 1076.27% compared with the commercial tablet. Therefore, a successful approach to deal with AVA first-pass metabolism and low bioavailability could be to employ buccal tablets containing a solubility-enhanced form of AVA.

Quercetin-Loaded Mesoporous Silica Nanoparticle-Based Lyophilized Tablets for Enhanced Physicochemical Features and Dissolution Rate: Formulation, Optimization, and In Vitro Evaluation

Mesoporous silica nanoparticles (MSNPs) have been proposed as a potential approach for stabilizing the amorphous state of poorly water-soluble actives. This study aimed to improve the physiochemical characteristics of poorly water-soluble quercetin (QT) through a novel lyophilized formulation. Various parameters, including solvent polarity, QT-carrier mass ratio, and adsorption time, were studied to improve the loading of QT into MSNPs. The optimized loaded MSNPs were formulated into lyophilized tablets through a freeze-drying process using hydrophilic polyvinylpyrrolidone (PVP-K30) as a polymeric stabilizer and water-soluble sucrose as a cryoprotectant. The effect of PVP-K30 and sucrose on the particle size, disintegration time, friability, and time required to release 90% of QT were studied using 3² full factorial design. The optimized formula was characterized using different evaluating techniques; for instance, differential scanning calorimetry, X-ray diffractometry, Fourier transform infrared spectroscopy, drug content, moisture content, and saturation solubility. The analysis proved that QT was consistently kept in the nanosize range with a narrow size distribution. The loaded silica nanoparticles and the optimized formulation are in an amorphous state devoid of any chemical interaction with the silica matrix or the lyophilization excipients. The optimized formula also featured low friability (less than 1%), fast disintegration (< 30 s), and a pronounced enhancement in saturation solubility and dissolution rate. Briefly, we established that the lyophilized MSNPs-based tablet would be a potential strategy for improving the rate of dissolution and, ultimately, the bioavailability of the poorly water-soluble QT.

Design and optimization of silymarin loaded in lyophilized fast melt tablets to attenuate lung toxicity induced via HgCl2 in rats

The present study aimed to develop fast melting tablets (FMTs) using silymarin (SM) owing to FMTs rapid disintegration and dissolution. FMTs represent a pathway to help patients to increase their compliance level of treatment via facile administration without water or chewing beside reduction cost. One of the methods for FMTs formulation is lyophilization. Optimization of SM-FMTs was developed via a 3² factorial design. All prepared SM-FMTs were evaluated for weight variation, thickness, breaking force, friability, content uniformity, disintegration time (DT), and % SM released. The optimized FMT formula was selected based on the criteria of scoring the fastest DT and highest % SM released after 10 min (Q₁₀). Optimized FMT was subjected to Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM) besides investigating its lung-protective efficacy. All SM-FMT tablets showed acceptable properties within the pharmacopeial standards. Optimized FMT (F7) scored a DT of 12.5 ± 0.64 Sec and % SM released at Q₁₀ of 82.69 ± 2.88%. No incompatibilities were found between SM and excipients, it showed a porous structure under SEM. The optimized formula decreased cytokines, up-regulated miRNA133a, and down-regulated miRNA-155 and COX-2 involved in the protection against lung toxicity prompted by HgCl₂ in a manner comparable to free SM at the same dosage.

Improving the Solubility and Oral Bioavailability of a Novel Aromatic Aldehyde Antisickling Agent (PP10) for the Treatment of Sickle Cell Disease

BACKGROUND

Aromatic aldehydes, with their ability to increase the oxygen affinity of sickle hemoglobin, have become important therapeutic agents for sickle cell disease (SCD). One such compound, voxelotor, was recently approved for SCD treatment. Methyl 6-((2-formyl-3-hydroxyphenoxy)methyl) picolinate (PP10) is another promising aromatic aldehyde, recently reported by our group. Like voxelotor, PP10 exhibits O2-dependent antisickling activity, but, unlike voxelotor, PP10 shows unique O2-independent antisickling effect. PP10, however, has limited solubility. This study therefore aimed to develop oral and parenteral formulations to improve PP10 solubility and bioavailability.

METHODS

Oral drug tablets with 2-hydroxypropyl beta cyclodextrin (HP-β-CD), polyvinylpyrrolidone, or Eudragit L100-55 PP10-binary system, and an intravenous (IV) formulation with d-α-tocopherol polyethylene glycol 1000 succinate (TPGS) or HP-β-CD, were developed. The pharmacokinetic behavior of the formulations was studied in Sprague-Dawley rats. PP10, a methylester, and its acid metabolite were also studied in vitro with sickle whole blood to determine their effect on Hb modification, Hb oxygen affinity, and sickle red blood cell inhibition.

RESULTS

Aqueous solubility of PP10 was enhanced ~5 times with the HP-β-CD binary system, while the TPGS aqueous micelle formulation was superior, with a drug concentration of 0.502 ± 0.01 mg/mL and a particle size of 26 ± 3 nm. The oral tablets showed relative and absolute bioavailabilities of 173.4% and 106.34%, respectively. The acid form of PP10 appeared to dominate in vivo, although both PP10 forms demonstrated pharmacologic effect.

CONCLUSION

Oral and IV formulations of PP10 were successfully developed using HP-β-CD binary system and TPGS aqueous micelles, respectively, resulting in significantly improved solubility and bioavailability.

Strategies and formulations of freeze-dried tablets for controlled drug delivery

The freeze-drying process has been particularly attractive for preparing tablets for controlled drug release. Although traditional methods, such as granulation or direct compression methods, have been used in various studies to produce tablets with controlled release, freeze-drying processes have been utilized in certain circumstances due to their distinct advantages. However, overall, further development of these strategies, which started with early studies on orally disintegrating tablets, is still necessary. In this review, the incorporation of different formulations into freeze-dried tablets will be discussed. Moreover, the use of excipients, freeze-drying conditions, formulation reconstitution and tablet structure for optimizing the performance of freeze-dried tablets will be reported, including strategies with nanoformulations and natural materials. Generally, this discussion with potential approaches will benefit further development of freeze-dried tablets containing drugs in the pharmaceutical industry.

Patient-Friendly, Olfactory-Targeted, Stimuli-Responsive Hydrogels for Cerebral Degenerative Disorders Ensured > 400% Brain Targeting Efficiency in Rats

Non-invasive brain therapy for chronic neurological disorders is in high demand. Vinpocetine (VIN) tablets for cerebrovascular degenerative disorders ensued < 7% oral bioavailability. The olfactory pathway (providing direct brain access) can improve VIN pharmacokinetic/pharmacodynamic profile. In this context, VIN hydrogels based on temperature-, pH-, and ion-triggered gelation in physiological milieu were formulated. Poloxamer-chitosan (PLX-CS) and carbopol-HPMC-alginate (CP-HPMC-SA) systems were optimized for appropriate gelation time, temperature, and pH. PLX-CS-hydrogels exhibited strong mucoadhesion for > 8 h, while CP-HPMC-SA hydrogels were mucoadhesive in simulated nasal fluid, owing to pH and ion-activated gelation. Along with prolonged mucosal residence, hydrogels confirmed sustained VIN release (> 24 h), especially from CP-HPMC-SA hydrogels. As proof of concept, brain exposure of intranasal VIN hydrogels was investigated in rats versus VIN-IV bolus. PLX-CS provided 146% increase in AUC_0-30 and 3-fold maximum brain concentration (BC_max) relative to IV bolus. BC_max was reached after 4 h versus 1 h (IV bolus). CP-HPMC-SA hydrogel showed superior brain targeting efficiency (460%) and brain direct transport percentage (78.23%). VIN plasma pharmacokinetics confirmed 45-60% reduction in AUC_plasma versus IV bolus, while PC_max of CP-HPMC-SA and PLX-CS represented 17 and 28% that of IV bolus, respectively. Olfactory-targeted hydrogels grant effective, sustainable VIN brain level with minimal systemic exposure, thus, assuring lower dose, dose frequency, side effects, and per se better patient compliance.

Rosuvastatin lyophilized tablets loaded with flexible chitosomes for improved drug bioavailability, anti-hyperlipidemic and anti-oxidant activity

Rosuvastatin is a hypolipidemic drug of limited oral bioavailability. The aim was to develop rosuvastatin flexible chitosomes and loading into a pullulan-based tablet to improve the bioavailability and maximize the antihyperlipidemic and antioxidant activities. Chitosomes nanoparticles were developed and characterized. Pullulan-based lyophilized fast dissolving tablets were developed and evaluated. The tablets' outer and inner structures were morphologically investigated. In vivo disintegration of the prepared tablets was studied in healthy human volunteers. The pharmacokinetics, antihyperlipidemic, antioxidant, and biochemical markers activities were conducted after administration of the tablets into male Wister rats. Liver histopathology was also investigated. The prepared chitosomes illustrated an average particle size of 342.22 ± 2.90 nm, a zeta potential value of +28.87 ± 1.39 mV and a drug entrapment efficiency of 94.59 ± 1.62%. The developed tablets showed an acceptable quality control characteristics and in vivo disintegration time of 1.48 ± 0.439 min. Scanning electron microscopy revealed distinct porous surface and sponge-like inner structure. The chitosomes based tablets demonstrated higher relative bioavailability by more than 30% and 36% when compared with the corresponding pure rosuvastatin and the marketed drug tablets, respectively. Moreover, the chitosomes based tablets showed a significant improvement in the hepatic serum biomarkers and a dramatic decrease in the serum antioxidants in response to Poloxamer 407 intoxication. The prepared tablets did not exhibit marked histopathological changes in the hepatic tissues. Accordingly, the pullan-based lyophilized fast-dissolving tablets loaded with chitosomes nanoparticles could be considered as a promising drug formulation for enhancing rosuvastatin bioavailability and pharmacodynamics activity.

Biodegradable self-assembled nanoparticles of PEG-PLGA amphiphilic diblock copolymer as a promising stealth system for augmented vinpocetine brain delivery

Vinpocetine (VNP), a semisynthetic drug, is utilized for the treatment of cerebrovascular and memory disorders. This work aimed at formulation of biodegradable VNP long-circulating nanoparticles utilizing Polyethylene glycol methyl ether-block-poly lactide-co-glycolide (PEG-PLGA) copolymer to surmount the drug drawbacks including low oral bioavailability and short elimination half-life. VNP nanoparticles were formulated using nanoprecipitation technique. A 2⁴ factorial design was applied to assess the impact of formulation and process variables on the nanoparticles' characteristics. Statistical analysis revealed that nanoparticles size (Y₁) significantly increased with increasing PEG-PLGA amount (X₁), poly-vinyl alcohol concentration (X₂), and PLGA content (X₄), while decreased with increasing sonication time (X₃). Furthermore, the entrapment efficiency (Y₂) was positively affected by both PEG-PLGA amount and PLGA content, while negatively affected by poly-vinyl alcohol concentration. The optimized formulation prepared using 200 mg of PEG-PLGA polymer (PEG: PLGA 2000: 4,500), 0.5% polyvinyl alcohol with sonication time of 60 s achieved spherical shape with particle size of 43 nm and drug entrapment of 82%. A significant bioavailability enhancement of VNP with marked prolongation of the in vivo systemic exposure of the drug and increased brain levels has also been achieved following intraperitoneal administration in Wistar rats. Thus, the optimized formulation could be regarded as a promising stealth nanocarrier that could surmount the drug pitfalls and enhance its brain delivery.

Enhancing the Hypolipidemic Effect of Simvastatin in Poloxamer-Induced Hyperlipidemic Rats via Liquisolid Approach: Pharmacokinetic and Pharmacodynamic Evaluation

This study aimed to enhance the dissolution of simvastatin (SMV) through its formulation in liquisolid tablets (LSTs) to improve its bioavailability and hypolipidemic activity after oral administration. SMV-LSTs were optimized using Box-Behnken design to maximize the rate and extent of SMV dissolution. The optimized SMV-LST was evaluated for pharmacokinetic parameters and potential hypolipidemic activity on induced hyperlipidemic rats. The dissolution parameters revealed a shortening of mean dissolution time from 10.99 to 6.82 min, increasing of dissolution rate during the first 10 min from 1253.15 to 1667.31 μg/min, and enhancing of dissolution efficiency after 60 min from 71.92 to 86.93% for SMV-LSTs versus the commercial SMV tablets. The obtained data reflected an improvement in the relative bioavailability of SMV with 148.232% which was confirmed by the significant reduction of the levels of circulating total cholesterol, triglycerides that reached the normal level after 12 h. In particular, the optimized SMV-LSTs reduced serum low-density lipoproteins (LDL) by 44.6% which was significantly different from the commercial SMV tablets. In contrast, the level of serum high-density lipoprotein (HDL) was significantly augmented after 4 h in rats treated with the optimized SMV-LSTs by 47.6%. Finally, the optimized SMV-LSTs showed a significant lower atherosclerotic index value which could maximize its potential in decreasing the risk of coronary disease and atherosclerosis. Overall enhancement in pharmacokinetics and pharmacodynamics in comparison with the commercial tablets confers the potential of the liquisolid approach as a promising alternative for improved oral bioavailability, hypolipidemic, and cardioprotective effects of SMV. Graphical abstract.

Improved Transmucosal Delivery of Glimepiride via Unidirectional Release Buccal Film Loaded With Vitamin E TPGS-Based Nanocarrier

Glimepiride (GMD) is a hypoglycemic agent that has variation in bioavailability for its unexpected absorption. Glimepiride was formulated in a buccal film loaded with a nanobased formulation to enhance its absorption via buccal mucosa. Nanostructured lipid carriers (NLCs) and d-α-tocopherol polyethylene glycol 1000 succinate-based micelles enhance GMD solubility and improve its permeation through the buccal mucosa. The formulation variables were optimized using a Box-Behnken design. These factors, such as the percent of micelles relative to NLC (X₁), the percent of Carbopol (X₂), and the percent of permeation enhancer (X₃), were investigated for their effect on the initial release (Y₁) and the cumulative release after 6 hours (Y₂). The optimum levels for X₁, X₂, and X₃ were 100%, 0.05%, and 1.8%, respectively. The optimized formulation revealed that the permeation of GMD from the film was in favor of micelles. This optimized film was then coated with ethyl cellulose to direct the release only through the buccal mucosa. The optimized unidirectional GMD transmucosal film showed a release of 93.9% of GMD content at 6 hours compared to 60.41% of GMD release from the raw GMD film. This finding confirmed the suitability of transmucosal delivery of GMD via the buccal mucosa.

Enhancement of Simvastatin ex vivo Permeation from Mucoadhesive Buccal Films Loaded with Dual Drug Release Carriers

BACKGROUND

Simvastatin (SMV), a hypocholesterolemic agent, suffers from very low bioavailability due to its poor aqueous solubility and extensive first-pass metabolism.

METHODS

Two SMV carrier systems, namely, polymeric drug inclusion complex (IC) and mixed micelles (MM) nanoparticles, were developed and loaded into mucoadhesive buccal films to enhance SMV bioavailability. The two carrier systems were characterized and their permeation across human oral epithelial cells (OEC) was studied. The effect of IC to MM ratio (X1) and the mucoadhesive polymer concentration (X2) on the cumulative percent of drug released, elongation percent and the mucoadhesive strength, from the prepared mucoadhesive films, were optimized. Ex vivo permeation across bovine mucosal tissue was investigated. The permeation parameters for the in vitro and ex vivo release data were calculated.

RESULTS

Complexation of SMV with hydroxypropyl beta-cyclodextrin (HP β-CD) was superior to all other polymers as revealed by the equilibrium saturation solubility, stability constant, complexation efficiency and thermodynamic potential. SMV-HP β-CD IC was utilized to develop a saturated polymeric drug solution. Both carrier systems showed enhanced permeation across OEC when compared to pure drug. X1 and X2 were significantly affecting the characteristics of the prepared films. The optimized mucoadhesive buccal film formulation loaded with SMV IC and drug MM nanoparticles demonstrated superior ex vivo permeation when compared to the corresponding pure drug buccal film, and the calculated permeation parameters confirmed this finding.

CONCLUSION

Mucoadhesive buccal films containing SMV IC and drug MM can be used to improve drug bioavailability; however, additional pharmacokinetic and pharmacodynamic studies are required.