Hyperthermia mediated by dextran-coated La0.7Sr0.3MnO3 nanoparticles: in vivo studies

Biomechanical sensing of in vivo magnetic nanoparticle hyperthermia-treated melanoma using magnetomotive optical coherence elastography

Rationale: Magnetic nanoparticle hyperthermia (MH) therapy is capable of thermally damaging tumor cells, yet a biomechanically-sensitive monitoring method for the applied thermal dosage has not been established. Biomechanical changes to tissue are known indicators for tumor diagnosis due to its association with the structural organization and composition of tissues at the cellular and molecular level. Here, by exploiting the theranostic functionality of magnetic nanoparticles (MNPs), we aim to explore the potential of using stiffness-based metrics that reveal the intrinsic biophysical changes of in vivo melanoma tumors after MH therapy. Methods: A total of 14 melanoma-bearing mice were intratumorally injected with dextran-coated MNPs, enabling MH treatment upon the application of an alternating magnetic field (AMF) at 64.7 kHz. The presence of the MNP heating sources was detected by magnetomotive optical coherence tomography (MM-OCT). For the first time, the elasticity alterations of the hyperthermia-treated, MNP-laden, in vivo tumors were also measured with magnetomotive optical coherence elastography (MM-OCE), based on the mechanical resonant frequency detected. To investigate the correlation between stiffness changes and the intrinsic biological changes, histopathology was performed on the excised tumor after the in vivo measurements. Results: Distinct shifts in mechanical resonant frequency were observed only in the MH-treated group, suggesting a heat-induced stiffness change in the melanoma tumor. Moreover, tumor cellularity, protein conformation, and temperature rise all play a role in tumor stiffness changes after MH treatment. With low cellularity, tumor softens after MH even with low temperature elevation. In contrast, with high cellularity, tumor softening occurs only with a low temperature rise, which is potentially due to protein unfolding, whereas tumor stiffening was seen with a higher temperature rise, likely due to protein denaturation. Conclusions: This study exploits the theranostic functionality of MNPs and investigates the MH-induced stiffness change on in vivo melanoma-bearing mice with MM-OCT and MM-OCE for the first time. It was discovered that the elasticity alteration of the melanoma tumor after MH treatment depends on both thermal dosage and the morphological features of the tumor. In summary, changes in tissue-level elasticity can potentially be a physically and physiologically meaningful metric and integrative therapeutic marker for MH treatment, while MM-OCE can be a suitable dosimetry technique.

Anti-bacterial and wound healing-promoting effects of zinc ferrite nanoparticles

BACKGROUND

Increasing antibiotic resistance continues to focus on research into the discovery of novel antimicrobial agents. Due to its antimicrobial and wound healing-promoting activity, metal nanoparticles have attracted attention for dermatological applications. This study is designed to investigate the scope and bactericidal potential of zinc ferrite nanoparticles (ZnFe₂O₄ NPs), and the mechanism of anti-bacterial action along with cytocompatibility, hemocompatibility, and wound healing properties.

RESULTS

ZnFe₂O₄ NPs were synthesized via a modified co-precipitation method. Structure, size, morphology, and elemental compositions of ZnFe₂O₄ NPs were analyzed using X-ray diffraction pattern, Fourier transform infrared spectroscopy, and field emission scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy. In PrestoBlue and live/dead assays, ZnFe₂O₄ NPs exhibited dose-dependent cytotoxic effects on human dermal fibroblasts. In addition, the hemocompatibility assay revealed that the NPs do not significantly rupture red blood cells up to a dose of 1000 µg/mL. Bacterial live/dead imaging and zone of inhibition analysis demonstrated that ZnFe₂O₄ NPs showed dose-dependent bactericidal activities in various strains of Gram-negative and Gram-positive bacteria. Interestingly, NPs showed antimicrobial activity through multiple mechanisms, such as cell membrane damage, protein leakage, and reactive oxygen species generation, and were more effective against gram-positive bacteria. Furthermore, in vitro scratch assay revealed that ZnFe₂O₄ NPs improved cell migration and proliferation of cells, with noticeable shrinkage of the artificial wound model.

CONCLUSIONS

This study indicated that ZnFe₂O₄ NPs have the potential to be used as a future antimicrobial and wound healing drug.

Treatment of Breast Cancer-Bearing BALB/c Mice with Magnetic Hyperthermia using Dendrimer Functionalized Iron-Oxide Nanoparticles

The development of novel nanoparticles for diagnostic and therapeutic applications has been one of the most crucial challenges in cancer theranostics for the last decades. Herein, we functionalized iron oxide nanoparticles (IONPs) with the fourth generation (G₄) of poly amidoamine (PAMAM) dendrimers (G₄@IONPs) for magnetic hyperthermia treatment of breast cancer in Bagg albino strain C (BALB/c)mice. The survival of breast cancer cells significantly decreased after incubation with G₄@IONPs and exposure to an alternating magnetic field (AMF) due to apoptosis and elevation of Bax (Bcl-2 associated X)/Bcl-2(B-cell lymphoma 2) ratio. After intratumoral injection of G₄@IONPs, tumor-bearing BALB/c mice were exposed to AMF for 20 min; this procedure was repeated three times every other day. After the last treatment, tumor size was measured every three days. Histopathological and Immunohistochemical studies were performed on the liver, lung, and tumor tissues in treated and control mice. The results did not show any metastatic cells in the liver and lung tissues in the treatment group, while the control mice tissues contained metastatic breast cancer cells. Furthermore, the findings of the present study showed that magnetic hyperthermia treatment inhibited tumor growth by increasing cancer cell apoptosis, as well as reducing the tumor angiogenesis.

Cancer cells resist hyperthermia due to its obstructed activation of caspase 3

Aim

It is well known that inducing hyperthermia is a type of cancer treatment but some research groups indicate that this treatment is not effective. This article finds and explains the mechanism of this treatment and its possible problems.

Background

Hyperthermia is commonly known as a state when the temperature of the body rises to a level that can threaten one's health. Hyperthermia is a type of cancer treatment in which body tissue is exposed to high temperatures (up to 45 °C). Research has shown that high temperatures can damage and kill cancer cells, usually with minimal injury to normal tissues. However, this mechanism is not known.

Materials and Methods

We recently treated cancer cells with different temperatures ranging from 37 °C to 47 °C and further measured their caspase 3 secretion by ELISA, western blot and cell survival rate by microscope.

Results

We found that most cancer cells are able to resist hyperthermia more than normal cells most likely via non-activation of caspase3. We also found that hyperthermia-treated (≥41°) cancer cells extend a long pseudopod-like extension in comparison to the same cancer cells under normal conditions.

Conclusion

Our data here indicates that cancer cells have resistance to higher temperatures compared to normal cells via non-activation of caspase 3. This is a significant issue that needs to be brought to attention as the medical community has always believed that a high temperature treatment can selectively kill cancer/tumor cells. Additionally, we believe that the pseudopod-like extensions of hyperthermia-treated cancer cells must be related to its resistance to hyperthermia.

Recent advancements in manganite perovskites and spinel ferrite-based magnetic nanoparticles for biomedical theranostic applications

Recently, magnetic nanoparticles (MNPs) based on manganite perovskites (La_1-xSr_xMnO₃ or LSMO) and/or spinel ferrites (i.e. SPFs with the formula MFe₂O₄; M=Co, Mg, Mn, Ni and Zn and mixed SPFs (e.g. Co-Zn, Mg-Mn, Mn-Zn and/or Ni-Zn)) have garnered great interest in magnetic hyperthermia therapy (MHT) as heat-inducing agents due to their tuneable magnetic properties including Curie temperature (T _c) to generate controllable therapeutic temperatures (i.e. 42 °C-45 °C)-under the application of an alternating magnetic field (AMF)-for the treatment of cancer. In addition, these nanoparticles are also utilized in magnetic resonance imaging (MRI) as contrast-enhancing agents. However, the employment of the LSMO/SPF-based MNPs in these MHT/MRI applications is majorly influenced by their inherent properties, which are mainly tuned by the synthesis factors. Therefore, in this review article, we have systematically discussed the significant chemical methods used to synthesize the LSMO/SPF-based MNPs and their corresponding intrinsic physicochemical properties (size/shape/crystallinity/dispersibility) and/or magnetic properties (including saturation magnetization (M _s)/T _c). Then, we have analyzed the usage of these MNPs for the effective imaging of cancerous tumors via MRI. Finally, we have reviewed in detail the heating capability (in terms of specific absorption rate) of the LSMO/SPF-based MNPs under calorimetric/biological conditions for efficient cancer treatment via MHT. Herein, we have mainly considered the significant parameters-such as size, surface coating (nature and amount), stoichiometry, concentration and the applied AMFs (including amplitude (H) and frequency (f))-that influence the heat induction ability of these MNPs.

Metallic Nanoparticles for Cancer Immunotherapy

Cancer immunotherapy, or the utilization of the body's immune system to attack tumor cells, has gained prominence over the past few decades as a viable cancer treatment strategy. Recently approved immunotherapeutics have conferred remission upon patients with previously bleak outcomes and have expanded the number of tools available to treat cancer. Nanoparticles -including polymeric, liposomal, and metallic formulations - naturally traffic to the spleen and lymph organs and the relevant immune cells therein, making them good candidates for delivery of immunotherapeutic agents. Metallic nanoparticle formulations in particular are advantageous because of their potential for dense surface functionalization and their capability for optical or heat based therapeutic methods. Many research groups have investigated the potential of nanoparticle-mediated delivery platforms to improve the efficacy of immunotherapies. Despite the significant preclinical successes demonstrated by many of these platforms over the last twenty years, few metallic nanoparticles have successfully entered clinical trials with none achieving FDA approval for cancer therapy. In this review, we will discuss preclinical research and clinical trials involving metallic nanoparticles (MNPs) for cancer immunotherapy applications and discuss the potential for clinical translation of MNPs.

Assessment of an Integrative Anticancer Treatment Using an in Vitro Perfusion-Enabled 3D Breast Tumor Model

The study presents observations on anticancer therapeutic efficacy of magnetic fluid hyperthermia and a combination of hyperthermia and chemotherapy (i.e., integrative treatment) using an in vitro perfused and non-perfused 3D breast tumor model. The 3D in vitro breast tumor models were simulated using Comsol multiphysics, fabricated using specially designed chips, and treated with doxorubicin-loaded chitosan-coated La_0.7Sr_0.3MnO₃ (DC-LSMO) nanoparticles for hyperthermia and combination therapy in both perfused and non-perfused conditions. Computation confirmed uniform heat distribution throughout the scaffold for both the models. The findings indicate that both hyperthermia and combination treatment could trigger apoptotic cell death in the perfused and non-perfused models in varying degrees. Specifically, the perfused tumors were more resistant to therapy than the non-perfused ones. The efficacy of anticancer treatment decreased with increasing physiological complexity of the tumor model. The combination (hyperthermia and chemotherapy) treatment showed enhanced efficacy over hyperthermia alone. This is a pilot study to investigate the effects of magnetic fluid hyperthermia-chemotherapy treatment using perfused and non-perfused 3D in vitro models of tumor. The feasibility of using 3D cell culture models for contributing to our understanding of cancer and its treatment was also determined as a part of this work.