A novel injectable calcium phosphate-based nanocomposite for the augmentation of cannulated pedicle-screw fixation

Modified and alternative bone cements can improve the induced membrane: Critical size bone defect model in rat femur

BACKGROUND

As a two-stage surgical procedure, Masquelet's technique has been used to care for critical-size bone defects (CSD). We aimed to determine the effects of modified and altered bone cement with biological or chemical enriching agents on the progression of Masquelet's induced membrane (IM) applied to a rat femur CSD model, and to compare the histopathological, biochemical, and immunohistochemical findings of these cements to enhance IM capacity.

METHODS

Thirty-five male rats were included in five groups: plain polymethyl methacrylate (PMMA), estrogen-impregnated PMMA (E+PMMA), bone chip added PMMA (BC+PMMA), hydroxyapatite-coated PMMA (HA) and calcium phosphate cement (CPC). The levels of bone alkaline phosphatase (BALP), osteocalcin (OC), and tumor necrosis factor-alpha (TNF-α) were analyzed in intracardiac blood samples collected at the end of 4 weeks of the right femur CSD intervention. All IMs collected were fixed and prepared for histopathological scoring. The tissue levels of rat-specific Transforming Growth Factor-Beta (TGF-β), Runt-related Transcription Factor 2 (Runx2), and Vascular Endothelial Growth Factor (VEGF) were analyzed immunohistochemically.

RESULTS

Serum levels of BALP and OC were significantly higher in E+PMMA and BC+PMMA groups than those of other groups (P = 0.0061 and 0.0019, respectively). In contrast, TNF-α levels of all groups with alternative bone cement significantly decreased compared to bare PMMA (P = 0.0116). Histopathological scores of E+PMMA, BC+PMMA, and CPC groups were 6.86 ± 1.57, 4.71 ± 0.76, and 6.57 ± 1.51, respectively, which were considerably higher than those of PMMA and HA groups (3.14 ± 0.70 and 1.86 ± 0.69, respectively) (P < 0.0001). Significant increases in TGF-β and VEGF expressions were observed in E+PMMA and CPC groups (P = 0.0001 and <0.0001, respectively) whereas Runx2 expression significantly increased only in the HA group compared to other groups (P < 0.0001).

CONCLUSIONS

The modified PMMA with E and BC, and CPC as an alternative spacer resulted in a well-differentiated IM and increased IM progression by elevating BALP and OC levels in serum and by mediating expressions of TGF-β and VEGF at the tissue level. Estrogen-supplemented cement spacer has yielded promising findings between modified and alternative bone cement.

Research progress on the application of magnesium phosphate bone cement in bone defect repair: A review

BACKGROUND

Bone defects arising from diverse causes, such as traffic accidents, contemporary weapon usage, and bone-related disorders, present significant challenges in clinical treatment. Prolonged treatment cycles for bone defects can result in complications, impacting patients' overall quality of life. Efficient and timely repair of bone defects is thus a critical concern in clinical practice.

OBJECTIVE

This study aims to assess the scientific progress and achievements of magnesium phosphate bone cement (MPC) as an artificial bone substitute material. Additionally, the research seeks to explore the future development path and clinical potential of MPC bone cement in addressing challenges associated with bone defects.

METHODS

The study comprehensively reviews MPC's performance, encompassing e.g. mechanical properties, biocompatibility, porosity, adhesion and injectability. Various modifiers are also considered to broaden MPC's applications in bone tissue engineering, emphasizing drug-loading performance and antibacterial capabilities, which meet clinical diversification requirements.

RESULTS

In comparison to alternatives such as autogenous bone transplantation, allograft, polymethyl methacrylate (PMMA), and calcium phosphate cement (CPC), MPC emerges as a promising solution for bone defects. It addresses limitations associated with these alternatives, such as immunological rejection and long-term harm to patients. MPC can control heat release during the curing process, exhibits superior mechanical strength, and has the capacity to stimulate new bone growth.

CONCLUSION

MPC stands out as an artificial bone substitute with appropriate mechanical strength, rapid degradation, non-toxicity, and good biocompatibility, facilitating bone repair and regeneration. Modification agents can enhance its clinical versatility. Future research should delve into its mechanical properties and formulations, expanding clinical applications to create higher-performing and more medically valuable alternatives in bone defect repair.

Cement Augmentation of Pedicle Screw Instrumentation: A Literature Review

This literature review aimed to review the current understanding, indications, and limitations of pedicle screw instrumentation cement augmentation. Since they were first reported in the 1980s, pedicle screw cement augmentation rates have been increasing. Several studies have been published to date that describe various surgical techniques and the biomechanical changes that occur when cement is introduced through the screw-bone interface. This article provides a concise review of the uses, biomechanical properties, cost analysis, complications, and surgical techniques used for pedicle screw cement augmentation to help guide physician practices. A comprehensive review of the current literature was conducted, with key studies, and contributions from throughout history being highlighted. Patients with low bone mineral density are the most well-studied indication for pedicle screw cement augmentation. Many studies show that cement augmentation can improve pullout strength in patients with low bone mineral density; however, the benefit varies inversely with pathology severity and directly with technique. The various screw types are discussed, with each having its own mechanical advantages. Cement distribution is largely dependent on the filling method and volume of cement used. Cement composition and timing of cement use after mixing are critical considerations in practice because they can significantly alter the bone-cement and screw-cement interfaces. Overall, studies have shown that pedicle screw cement augmentation has a low complication rate and increased pullout strength, justifying its universal use in patients with a suboptimal bone-implant interface.

Study on injectable silver-incorporated calcium phosphate composite with enhanced antibacterial and biomechanical properties for fighting bone cement-associated infections

Although commonly used in orthopedic surgery, bone cements often face a high risk of post-operative infection. Developing bone cement with antibacterial capability is an effective path for eliminating implant-associated infections. Herein, the potential of silver ions (Ag⁺) and silver nanoparticles (AgNPs) in modifying CPC for long-term antibacterial property was investigated. Ag⁺ ions or AgNPs of various concentrations were incorporated in starch-modified calcium phosphate bone cement (CPB) to obtain Ag⁺-containing (Ag⁺@CPB) and AgNPs-containing (AgNP@CPB) bone cements. The results showed that all silver-containing CPBs had setting times of about 25-40 min, compressive strengths of greater than 22 MPa, high cytocompatibility but inhibitory effect on Staphylococcus aureus growth. After soaking for 1 week, the mechanical properties and the cytocompatibility of all cements revealed no significant changes, but only CPB with a relatively high content of Ag⁺ (H-Ag⁺@CPB) maintained good antibacterial capability over the tested time period. In addition, all the cements showed high injectability and interdigitating capability in cancellous bone and demonstrated augmentation effect on the cannulated pedicle screws fixation in the Sawbones model. In summary, the sustainable antibacterial capability and enhanced biomechanical properties demonstrated that Ag⁺ ions were more suitable for the fabrication of antibacterial CPC compared to AgNPs. Also, the H-Ag⁺@CPB, with good injectability, high cytocompatibility, good interdigitating and biomechanical property in cancellous bone, and sustainable antibacterial effects, bears great potential for the treatments of bone infections or implant-associated infections.

Evaluation of an Injectable Biphasic Calcium Sulfate/Hydroxyapatite Cement for the Augmentation of Fenestrated Pedicle Screws in Osteoporotic Vertebrae: A Biomechanical Cadaver Study

Cement augmentation of pedicle screws is one of the most promising approaches to enhance the anchoring of screws in the osteoporotic spine. To date, there is no ideal cement for pedicle screw augmentation. The purpose of this study was to investigate whether an injectable, bioactive, and degradable calcium sulfate/hydroxyapatite (CaS/HA) cement could increase the maximum pull-out force of pedicle screws in osteoporotic vertebrae. Herein, 17 osteoporotic thoracic and lumbar vertebrae were obtained from a single fresh-frozen human cadaver and instrumented with fenestrated pedicle screws. The right screw in each vertebra was augmented with CaS/HA cement and the un-augmented left side served as a paired control. The cement distribution, interdigitation ability, and cement leakage were evaluated using radiographs. Furthermore, pull-out testing was used to evaluate the immediate mechanical effect of CaS/HA augmentation on the pedicle screws. The CaS/HA cement presented good distribution and interdigitation ability without leakage into the spinal canal. Augmentation significantly enhanced the maximum pull-out force of the pedicle screw in which the augmented side was 39.0% higher than the pedicle-screw-alone side. Therefore, the novel biodegradable biphasic CaS/HA cement could be a promising material for pedicle screw augmentation in the osteoporotic spine.

Biomechanical Comparison and Three-Dimensional Analysis of Cement Distribution Patterns for Different Pedicle Screw Designs

The purpose of this study to explore strategies for reducing cement leakage during cement-augmented pedicle screw fixation, we compared the cement distribution patterns and biomechanical strengths of different types of cement-augmented fenestrated screws and traditional cement-augmented techniques. We compared five screw groups in this study: (1) Cannulated screws (Cann); (2) distal one-hole screws (D1); (3) distal two-hole screws (D2); (4) middle two-hole screws (M2); and (5) traditional screws with a traditional cement injection technique (Trad). The screws were inserted into cancellous bone blocks using a controlled, adequate cement injection pressure (1.6–2.0 kg), and an appropriate cement viscosity. Center to screw tip distance, three-dimensional distribution, and pull-out strength for cement were compared between groups. The average distance between the cement center and the screw tip was highest in the M2 group, suggesting a higher risk of cement leakage into the spinal canal. The Trad group had the highest migration distance in the z-axis, also reflecting a higher risk of leakage into the spinal canal. The D1 group had the highest pull-out strength ( $253\pm 48.82\text{N}$ and $797\pm 58.31\text{N}$ ) in bone blocks representing different degrees of osteoporosis, and the D2 group had the second highest pull-out strength in the severe osteoporosis model. Overall, D1 screws appeared to be the best option for optimizing biomechanical function and minimizing the risk of cement leakage into the spinal canal in patients with osteoporotic bone undergoing spinal surgery.

A Novel Calcium Phosphate-Based Nanocomposite for Augmentation of Cortical Bone Trajectory Screw Fixation

Purpose

To evaluate the effect of cement augmentation of cortical bone trajectory (CBT) screws using a novel calcium phosphate–based nanocomposite (CPN).

Material and Methods

CBT screws were placed into cadaveric lumbar vertebrae. Depending on the material used for augmentation, they were divided into the following three groups: CPN, polymethylmethacrylate (PMMA), and control. Radiological imaging was used to evaluate the cement dispersion. Biomechanical tests were conducted to measure the stability of CBT screws. A rat cranial defect model was used to evaluate biodegradation and osseointegration of the CPN.

Results

After cement augmentation, the CPN tended to disperse into the distal part of the screws, whereas PMMA remained limited to the proximal part of the screws (P < 0.05). As for cement morphology, the CPN tended to form a concentrated mass, whereas PMMA arranged itself as a scattered cement cloud, but the difference was not significant (P > 0.05). The axial pullout test showed that the average maximal pullout force (Fmax) of CPN-augmented CBT screws was similar to that of the PMMA group (CPN, 1639.56 ± 358.21 N vs PMMA, 1778.45 ± 399.83 N; P = 0.745) and was significantly greater than that of the control group (1019.01 ± 371.98 N; P < 0.05). The average torque value in the CPN group was higher than that in the control group (CPN, 1.51 ± 0.78 N∙m vs control, 0.97 ± 0.58 N∙m) and lower than that in the PMMA group (1.93 ± 0.81 N∙m), but there were no statistically significant differences (P > 0.05). The CPN could be biodegraded and gradually replaced by newly formed bone tissue after 12 weeks in a rat cranial defect model.

Conclusion

The biocompatible CPN could be a valuable augmentation material to enhance CBT screw stability.

The Biomechanical Properties of Cement-Augmented Pedicle Screws for Osteoporotic Spines

STUDY DESIGN

This is a broad, narrative review of the literature.

OBJECTIVE

In this review, we describe recent biomechanics studies on cement-augmented pedicle screws for osteoporotic spines to determine which factors influence the effect of cement augmentation.

METHODS

A search of Medline was performed, combining the search terms "pedicle screw" and ("augmentation" OR "cement"). Articles published in the past 5 years dealing with biomechanical testing were included.

RESULTS

Several factors have been identified to impact the effect of cement augmentation in osteoporotic spines. These include the type of augmentation material, the volume of injected cement, the timing of augmentation, the severity of osteoporosis, the design of the pedicle screw, and the specific augmenting technique, among others.

CONCLUSIONS

This review elaborates the biomechanics of cement-augmented pedicle screws, determines which factors influence the augmentation effect, and identifies the risk factors of cement leakage in osteoporotic bone, which might offer some guidance when using this technique in clinical practice. Further, we provide information about newly designed screws and recently developed augmentation materials that provide higher screw stability as well as fewer cement-related complications.

Calcium phosphate-based composite cement: Impact of starch type and starch pregelatinization on its physicochemical properties and performance in the vertebral fracture surgical models in vitro

Calcium phosphate cement (CPC) modified with native and pregelatinized normal corn and waxy maize starches was studied. Effects of starch pregelatinization and starch type on the physicochemical properties of CPC were investigated. CPC modified with pregelatinized normal corn starch (CPB-PNC) or pregelatinized waxy maize starch (CPB-PW) was evaluated by two vertebral fracture surgical models in vitro. Both granular and pregelatinized starches significantly improved the setting times and injectability of CPC, but only the pregelatinized starches improved the anti-collapsibility and compressive strength of CPC significantly. CPB-PW, whose micro-structure was compact and uniform, showed the best physicochemical properties. Addition of starch did not inhibit the hydro-reaction of CPC. Unmodified CPC had very poor dispersibility and could not apply in the tests of the surgical models. Pregelatinized starch especially waxy maize starch improved the dispersibility of CPC and showed good dispersion area, volume, improved pull-out force and maximum torque in the Sawbones sponge model. Similarly, in the minimally invasive kyphoplasty model, CPB-PNC and CPB-PW could disperse in the osteoporotic sheep vertebrae and improve the compressive strength of the sheep vertebral body. In conclusion, starch pregelatinization and starch botanical source affect the physicochemical properties of CPC significantly. Bone cements modified by different starches also performed differently in surgical models for osteoporotic vertebral fracture. Pregelatinized waxy maize starch may be a better candidate for CPC modification comparing to the pregelatinized normal corn starch.

Biomechanical comparison of pedicle screw fixation strength in synthetic bones: Effects of screw shape, core/thread profile and cement augmentation

Pedicle screw loosening resulting from insufficient bone-screw interfacial holding power is not uncommon. The screw shape and thread profile are considered important factors of the screw fixation strength. This work investigated the difference in pullout strength between conical and cylindrical screws with three different thread designs. The effects of the thread profiles on the screw fixation strength of cannulated screws with or without cement augmentation in osteoporotic bone were also evaluated. Commercially available artificial standard L4 vertebrae and low-density polyurethane foam blocks were used as substitutes for healthy vertebrae and osteoporotic bones, respectively. The screw pullout strengths of nine screw systems were investigated (six in each). These systems included the combination of three different screw shapes (solid/cylindrical, solid/conical and cannulated/cylindrical) with three different thread profiles (fine-thread, coarse-thread and dual-core/dual-thread). Solid screws were designed for the cementless screw fixation of vertebrae using the standard samples, whereas cannulated screws were designed for the cemented screw fixation of osteoporotic bone using low-density test blocks. Following specimen preparation, a screw pullout test was conducted using a material test machine, and the maximal screw pullout strength was compared among the groups. This study demonstrated that, in healthy vertebrae, both the conical and dual-core/dual-thread designs can improve pullout strength. A combination of the conical and dual-core/dual-thread designs may achieve optimal postoperative screw stability. However, in osteoporotic bone, the thread profile have little impact on the screw fixation strength when pedicle screws are fixed with cement augmentation. Cement augmentation is the most important factor contributing to screw pullout fixation strength as compared to screw designs.

Biomechanical evaluation of calcium phosphate-based nanocomposite versus polymethylmethacrylate cement for percutaneous kyphoplasty

BACKGROUND CONTEXT

Polymethylmethacrylate (PMMA) is the most commonly used filling material when performing percutaneous kyphoplasty (PKP) for the treatment of osteoporotic vertebral compression fractures. However, there are some inherent and unavoidable drawbacks with the clinical use of PMMA. PMMA bone cement tends to leak during injection, which can lead to injury of the spinal nerves and spinal cord. Moreover, the mechanical strength of PMMA-augmented vertebral bodies is extraordinary and this high level of mechanical strength might predispose to adjacent vertebral fractures. A novel biodegradable calcium phosphate-based nanocomposite (CPN) for PKP augmentation has recently been developed to potentially avoid these issues.

PURPOSE

By comparison with PMMA, the leakage characteristics, biomechanical properties, and dispersion of CPN were evaluated when used for PKP.

STUDY DESIGN

Biomechanical evaluation and studies on the dispersion and anti-leakage properties of CPN and PMMA cements were performed and compared using cadaveric vertebral fracture model, sheep vertebral fracture model, and simulated rigid foam model.

METHODS

Sheep vertebral bodies were decalcified by ethylenediaminetetraacetic acid disodium salt (EDTA-Na₂) to simulate osteoporosis in vitro. After compression to create wedge-shaped fractures using a self-designed fracture creation tool, human cadaveric vertebrae and decalcified sheep vertebrae were augmented by PKP. In addition, three L5 vertebral bodies from human cadavers were used in a contrast vertebroplasty (VP) augmentation experiment. Occurrence of cement leakage was observed and compared between CPN and PMMA during the process of vertebral augmentation. Open-cell rigid foam model (Sawbones#1522-507) was used to create a simulated leakage model for the evaluation of the leakage characteristics of CPN and PMMA with different viscosities. The augmentation effects of CPN and PMMA were evaluated in human cadaveric and decalcified sheep vertebral models and then compared to the results from solid rigid foam model (Sawbones#1522-23). The dispersion abilities of CPN and PMMA were evaluated via three methods as follows. The dispersion volume and dispersion ratio were calculated by three-dimensional reconstruction using human vertebral body CT scans; the ratio of cement area to injection volume was calculated from three-dimensional sections of micro-CT scans of a sheep vertebra; and the micro-CT images of cement dispersion in open-cell rigid foam model (Sawbones#1522-507) were compared between CPN and PMMA. This study was funded by the National Natural Science Foundation of China (No. 81622032, 190,000 dollars and No. 51672184, 90,600 dollars), Principal Project of Natural Science Research of Jiangsu Higher Education Institutions (No. 17KJA180011, 22,000 dollars), and Jiangsu Innovation and Entrepreneurship Program (146,000 dollars).

RESULTS

There was no significant difference in vertebral height between CPN and PMMA during PKP augmentation and both cements restored the vertebral height after augmentation. In PKP augmentation experiment, posterior wall cement leakage occurred in 75% of human vertebrae augmented with PMMA; however, no leakage occurred in human vertebrae augmented with CPN. Anterior leakage occurred in all vertebrae augmented by PMMA, while in only 75% of vertebra augmented by CPN. Furthermore, CPN and PMMA had completely different leakage patterns in the simulated rigid foam model whether administered at the same injection speed or under the same injection force, suggesting that CPN has anti-leakage characteristics. The augmentation in human cadaveric vertebrae was lower with CPN compared to PMMA (1,668±816 N vs. 2,212±813 N, p=.459, respectively), but this difference was not significant. The augmentation force in sheep vertebral bodies reached 1,393±433 N when augmented with PMMA, but 1,108±284 N when augmented with CPN. The dispersion of CPN was better, and the dispersion volume and ratio were greater, with CPN than with PMMA. Imaging of the open-cell rigid foam model showed completely different dispersion modes for CPN and PMMA. After injection, the PMMA cement formed a contracted clump in the open-cell rigid foam model. However, the CPN cement extended many antennae outward, appearing to spread to the surrounding area. The surface areas of the CPN cement blocks with different liquid-to-solid ratios were significantly larger than the surface area of the PMMA cement in the open-cell rigid foam model (p<.05).

CONCLUSIONS

CPN has anti-leakage properties, which might be related to its high viscosity and viscoplasticity. CPN had a slightly lower augmentation force than PMMA when used in cadaveric vertebrae, decalcified sheep vertebrae, and in the standard rigid foam model. However, CPN diffused more easily into cancellous bone than did PMMA and encapsulated bone tissue during the dispersion process. The excellent dispersion of CPN generated better interdigitation with cancellous bone, which may be why the augmentation effect of CPN is similar to that of PMMA.

CLINICAL SIGNIFICANCE

Biodegradable CPN is a potential alternative to PMMA cement in PKP surgery, in which CPN is likely to reduce the cement leakage during the surgery and avoid the post-surgery complications caused by excessive strengths and nondegradability of PMMA cement.

A novel calcium phosphate-based nanocomposite for the augmentation of cement-injectable cannulated pedicle screws fixation: A cadaver and biomechanical study

Background/objective

Both polymethylmethacrylate (PMMA) and traditional calcium phosphate–based cements have some deficiencies as augmentation materials for pedicle screw fixation. Here, a novel calcium phosphate–based nanocomposite (CPN) for the augmentation of pedicle screw fixation was developed based on previous study, and the handling properties, biomechanical performance, and biodegradation behaviour of CPN were evaluated and compared with clinical PMMA by means of a cadaver study and animal tests.

Methods

Bone mineral density of the lumbar vertebrae was tested. Pedicle screws were placed into the lumbar vertebrae under the guidance of three dimensionally printed templates; each of which was designed based on computed tomography (CT) reconstruction of each vertebrae ​and augmented with either PMMA or CPN. X-ray and CT scan were used to evaluate the accuracy of screw placement and dispersion as well as interdigitation of bone cement. The axial pull-out strength and maximum torque were tested using a mechanical testing machine. Degradation behaviour of CPN was evaluated by in vitro immersion tests for 8 weeks and in vivo rabbit femur defect model for up to 6 months, respectively.

Results

Standard mechanical tests revealed that PMMA was much stronger than CPN after setting (compressive strength 95 vs. 49 ​MPa, respectively, p ​< ​0.001). Results of the projection area and volume distribution of cement along the distal end of the screws revealed that CPN exhibited unique dispersing and interdigitation abilities compared with PMMA. Specifically, CPN dispersed uniformly and symmetrically along the screw, while PMMA was limited to the proximal part of the screw. Axial pull-out test results showed that the axial pull-out strengths of CPN- and PMMA-augmented pedicle screws were similar (1199 ​± ​225 ​N vs 1337 ​± ​483 ​N, respectively) and not significantly different (p ​= ​0.47), although CPN was an intrinsically weaker material than PMMA. Similarly, CPN showed average torque values of 0.72 ​± ​0.31 ​N·m slightly lower than those of PMMA (0.96 ​± ​0.23 ​N·m), but statistically there was no significant difference between CPN and PMMA (p ​= ​0.21). In a rabbit model of femoral bone defect, the implanted CPN maintained its clear boundary and there is no disintegration in the cement clump after 20 days and 24 weeks, and there was moderate bioabsorption of CPN and clearly new bone ingrowth at the absorbed sites after 24 weeks.

Conclusion

A new nanocomposite cement CPN, designed for replacing the nondegradable PMMA cement and overcoming the mechanical inferiority of calcium phosphate cement, was evaluated for its biomechanical and biodegradation behaviours in cement-injectable cannulated pedicle screws (CICPS) application. Although CPN is a mechanically weaker material than PMMA, CPN demonstrates similar biomechanical properties to PMMA in the application of augmentation for CICPS fixation in cadaveric vertebrae. This improvement in biomechanical property is attributed to a better dispersion and interdigitation mode of CPN. In addition, the animal study results suggest the in vivo absorption of CPN is slow enough and matches the bone ingrowth.

The translational potential of this article

This work reports a cadaveric and biomechanical study of novel CPN for the application in the augmentation of CICPS. The results suggest that CPN has equivalent or better biomechanical and interdigitation performance compared with PMMA. Together with the biodegradability and ossointegration capability, CPN reveals high translational potential as a new bone cements for load-bearing bone fixation and repair.

Biomechanical properties of pedicle screw fixation augmented with allograft bone particles in osteoporotic vertebrae: different sizes and amounts

BACKGROUND CONTEXT

A persistent challenge in spine surgery is improving screw fixation in patients with poor bone quality. Augmenting pedicle screw fixation with allograft bone appears to be a promising approach.

PURPOSE

To evaluate the biomechanical properties of screws augmented or revised with allograft bone particles (ABPs) and the effect of different sizes and amounts of ABP on screw-fixation strength.

STUDY DESIGN

Biomechanical in vitro study.

METHODS

Sixty vertebrae were separated randomly into six groups. Groups A1 and A2: one pedicle of each vertebra was selected randomly to be the original pedicle and implanted with a screw. Then, biomechanical tests were performed. Subsequently, the failed trajectory was revised with 1 mm ABP, and the contralateral pedicle was augmented with the same size and amount of ABP. Groups B1 and B2: two pedicles of each vertebra were augmented with different amounts of 1 mm ABP. Groups C1 and C2: one pedicle of each vertebra was augmented with 1 mm ABP to the maximum. The contralateral pedicle of each vertebra was augmented with the same amount of 2 mm ABP. After augmentation and screw insertion, groups A1, B1, and C1 were subjected to the pullout test, whereas groups A2, B2, and C2 the cyclic fatigue test.

RESULTS

Groups A1 and A2: screw augmentation increased the pullout strength by 47%, cycles to failure by 31%, and failure loads by 21% compared with the screw in the original pedicle (p<.05). Screw revision obtained 79% pullout strength, 97% cycles to failure, and 98% failure loads of the screw in the original pedicle (p<.05). Groups B1 and B2: full (100%) trajectory augmentation increased the pullout strength by 39%, cycles to failure by 18%, and failure loads by 12% compared with half (50%) trajectory augmentation (p<.05). Groups C1 and C2: the values of the pullout strength, cycles to failure, and failure loads of the screw augmented with 1 mm ABP were all greater than those in the 2 mm ABP. However, no significant differences were observed between the two treatments (p>.05).

CONCLUSIONS

Trajectory augmentation with ABP can significantly increase the strength of the augmented screws. Full trajectory augmentation can provide greater strength compared with half trajectory augmentation. In patients with osteoporosis, we recommend using 1 mm ABP in full trajectory augmentation (0.3 g ABP for 5.5 mm×40 mm and 0.5 g ABP for 6.5 mm×45 mm) before trajectory fails.

Technical Note: Pedicle Cement Augmentation with Proximal Screw Toggle and Loosening

Background

Cement augmentation is a technique used to increase the stability and purchase of pedicle screws in poor quality bone. Various methods can be applied for cement delivery, such as cement injection before screw placement and the use of fenestrated screws. However, potential problems can arise with the use of cement augmentation.

Case Presentation

A 66‐year‐old man with a lower trunk deformity, severe kyphosis, and sagittal imbalance following fusion (L_2‐5), with minimal comorbidities, was referred to our unit 9 months after surgery. Pain and progressive kyphosis were investigated clinically and radiographically with computed tomography (CT) scans to assess the status of the hardware and fusion. CT imaging revealed that cement was present only at the distal tip of the fenestrated screws at the L4 vertebral level. A non‐union was present along with loosening and a halo around the body of the pedicle screws, and there was evidence of pullout of inferior screws.

Conclusion

Single‐level cement augmentation of pedicle screw in a posterior construct and distal tip cement augmentation of the screw results in a fixed pivot point. Micromotion in cranio‐caudal loading during flexion and extension may result in screw toggling with the single‐level cement‐augmented tip as a fulcrum. This may cause screw loosening, which can lead to pullout and loss of construct stability. The halo around the screw suggests bone loss and/or a fibrous tissue interface, which further complicates revision surgery. Stress shielding and polymethylmethacrylate cement present additional difficulties.

The findings of this technical note question the risks and benefits of cement‐augmented fenestrated pedicle screw fixation for spinal fusion. Although incidences of such cases are uncommon, surgeons should perform this technique with caution. Accurate restoration of lumbar lordosis during index procedures is important to minimize the risk of construct failure.