Biofunctional Sr- and Si-loaded titania nanotube coating of Ti surfaces by anodization-hydrothermal process

Layer-by-layer self-assembly coatings on strontium titanate nanotubes with antimicrobial and anti-inflammatory properties to prevent implant-related infections

One way to effectively address endophyte infection and loosening is the creation of multifunctional coatings that combine anti-inflammatory, antibacterial, and vascularized osteogenesis. This study started with the preparation of strontium-doped titanium dioxide nanotubes (STN) on the titanium surface. Next, tannic acid (TA), gentamicin sulfate (GS), and pluronic F127 (PF127) were successfully loaded into the STN via layer-by-layer self-assembly, resulting in the STN@TA-GS/PF composite coatings. The findings demonstrated the excellent hydrophilicity and bioactivity of the STN@TA-GS/PF coating. STN@TA-GS/PF inhibited E. coli and S. aureus in vitro to a degree of roughly 80.95 % and 92.45 %, respectively. Cellular investigations revealed that on the STN@TA-GS/PF surface, the immune-system-related RAW264.7, the vasculogenic HUVEC, and the osteogenic MC3T3-E1 showed good adhesion and proliferation activities. STN@TA-GS/PF may influence RAW264.7 polarization toward the M2-type and encourage MC3T3-E1 differentiation toward osteogenesis at the molecular level. Meanwhile, the STN@TA-GS/PF coating achieved effective removal of ROS within HUVEC and significantly promoted angiogenesis. In both infected and non-infected bone defect models, the STN@TA-GS/PF material demonstrated strong anti-inflammatory, antibacterial, and vascularization-promoting osteogenesis properties. In addition, STN@TA-GS/PF had good hemocompatibility and biosafety. The three-step process used in this study to modify the titanium surface for several purposes gave rise to a novel concept for the clinical design of antimicrobial coatings with immunomodulatory properties.

Surface Modification and Functionalities for Titanium Dental Implants

Dental implants have become the mainstream strategy for oral restoration, and implant materials are the most important research hot spot in this field. So far, Ti implants dominate all kinds of implants. The surface properties of the Ti implant play decisive roles in osseointegration and antibacterial performance. Surface modifications can significantly change the surface micro/nanotopography and composition of Ti implants, which will effectively improve their hydrophilicity, mechanical properties, osseointegration performance, antibacterial performance, etc. These optimizations will thus improve implant success and service life. In this paper, the latest surface modification techniques of Ti dental implants are systematically and comprehensively reviewed. The various biomedical functionalities of surface modifications are discussed in-depth. Finally, a profound comment on the challenges and opportunities of this frontier is proposed, and the most promising directions for the future were explored.

SrFe12O19-doped nano-layered double hydroxide/chitosan layered scaffolds with a nacre-mimetic architecture guide in situ bone ingrowth and regulate bone homeostasis

Osteoporotic bone defects result from an imbalance in bone homeostasis, excessive osteoclast activity, and the weakening of osteogenic mineralization, resulting in impaired bone regeneration. Herein, inspired by the hierarchical structures of mollusk nacre, nacre exhibits outstanding high-strength mechanical properties, which are in part due to its delicate layered structure. SrFe₁₂O₁₉ nanoparticles and nano-layered double hydroxide (LDH) were incorporated into a bioactive chitosan (CS) matrix to form multifunctional layered nano-SrFe₁₂O₁₉-LDH/CS scaffolds. The compressive stress value of the internal ordered layer structure matches the trabecular bone (0.18 ​MPa). The as-released Mg²⁺ ions from the nano-LDH can inhibit bone resorption in osteoclasts by inhibiting the NFκB signaling pathway. At the same time, the as-released Sr²⁺ ions promote the high expression of osteoblast collagen 1 proteins and accelerate bone mineralization by activating the BMP-2/SMAD signaling pathway. In vivo, the Mg²⁺ ions released from the SrFe₁₂O₁₉-LDH/CS scaffolds inhibited the release of pro-inflammatory factors (IL-1β and TNF-α), while the as-released Sr²⁺ ions promoted osteoblastic proliferation and the mineralization of osteoblasts inside the layered SrFe₁₂O₁₉-LDH/CS scaffolds. Immunofluorescence for OPG, RANKL, and CD31, showed that stable vasculature could be formed inside the layered SrFe₁₂O₁₉-LDH/CS scaffolds. Hence, this study on multifunctional SrFe₁₂O₁₉-LDH/CS scaffolds clarifies the regulatory mechanism of osteoporotic bone regeneration and is expected to provide a theoretical basis for the research, development, and clinical application of this scaffold on osteoporotic bone defects.

•

1, SrFe₁₂O₁₉ nanoparticles and LDH were incorporated into a bioactive CS matrix.

•

2, SrFe₁₂O₁₉-LDH/CS scaffolds were prepared as a layered scaffold to increase mechanical strength.

•

3, The slow release of Mg²⁺ and Sr²⁺ could maintain bone homeostasis.

•

4, The scaffolds also promote the formation of new blood vessels.

"Dual-functional" strontium titanate nanotubes designed based on fusion peptides simultaneously enhancing anti-infection and osseointegration

Currently, there is an increasing clinical demand for implants that effectively resist bacterial infections while promoting osseointegration. In this study, the fusion peptide technology was used to linearly fuse the antimicrobial peptide (AMP, HHC36) and the bone-promoting peptide (RGD), so that the titanium (Ti)-based implant modified by the polypeptide had the dual function of "antibacterial-promoting bone". Firstly, self-organized vertically-oriented strontium-doped titanium dioxide nanotubes (STN) were manufactured by anodizing and hydrothermal synthesis methods. Secondly, the fusion peptide (HHC36-RGD) was loaded into the tubular structure by a simple vacuum-assisted physical adsorption method. Finally, STN loaded with HHC36-RGD (H-R-STN) was obtained. The characterization results demonstrated that the surface of the H-R-STN had a roughness and hydrophilicity that promoted cell adhesion. Additionally, electrochemical tests showed that H-R-STN coating can reduce the corrosion rate of pure Ti. The fusion peptide and Sr²⁺ in H-R-STN were released in the initial fast and subsequent slow kinetic model. Expected, H-R-STN can kill more than 99% of clinically common pathogenic bacteria (Staphylococcus aureus and Escherichia coli), and significantly inhibit the formation of bacterial biofilms. Simultaneously, under the synergistic effect of RGD in the fusion peptide and strontium in STN, H-R-STN markedly promoted the adhesion and proliferation of mouse osteoblasts, and significantly promoted osteogenic markers (alkaline phosphatase, runt-related transcription, collagen, mineralization) expression. In summary, the bifunctional titanium-based implant constructed by H-R-STN in this article can effectively prevent bacterial infections and promote early osseointegration. The main advantage of the titanium surface treatment method of the study was that its simplicity, low cost, especially its versatility made it a promising anti-infective bone repair material.

Biocompatible Nanotube-Strontium/polydopamine-arginine-glycine-aspartic acid coating on Ti6Al4V enhances osteogenic properties for biomedical applications

Titanium (Ti) alloys, particularly Ti₆ Al₄ V, are the most commonly used biomedical implant material. Ti alloys are biologically inert, so there have been continuous efforts to improve their osteogenic properties and clinical performance. Since TiO₂ nanotubes (NT) appear to be excellent drug platforms, and strontium reportedly enhances osteogenesis, we constructed a TiO₂ nanotube coating on the surface of Ti₆ Al₄ V and immersed it in Sr (OH)₂ solution in order to incorporate Sr into TiO₂ nanotubes (NT-Sr). The results of field emission scanning electron microscope and X-ray diffraction analysis verified the fabrication of NT-Sr. We next added polydopamine (PDA) and cyclo- (arginine-glycine-aspartic acid-phenylalanine-cysteine) [c(RGDfC)] peptides to further promote biocompatibility of the implant. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy confirmed the existence of PDA and c(RGDfC). Mesenchymal stem cells (MSCs) were planted on Ti, NT, NT-Sr, NT-Sr/PDA, and NT-Sr/PDA-RGD surfaces. The adhesion and differentiation of MSCs on different surfaces were evaluated. The mRNA expression of alkaline phosphatase, runt-related transcription factor 2 (Runx2) and type I collagen (Col I) of different groups were also tested. Finally, we observed that the NT-Sr/PDA-RGD group showed significantly better performance than other groups in terms of the differentiation and osteogenesis-related gene expression of MSCs. Thus, the NT-Sr/PDA-RGD complex may be an important modification strategy for Ti, as it shows excellent osteogenic potential.

Titanium dioxide nanotubes as drug carriers for infection control and osteogenesis of bone implants

Titanium implants have been widely used as one of the most effective treatments of bone defects. However, the lack of osteogenesis and bacteria-resistant activities result in high infection and loosening rates of titanium implants. Anodic oxidation could easily construct titanium dioxide nanotubes (TNTs) array on the surface of titanium, and the rough surface of TNTs is beneficial to the growth of osteoblast-related cells on the surface. And TNTs could be excellent drug carriers because of their single-entry tubular hollow structure. In this review, we aim at detailing the application of TNTs as drug carriers in the field of bone implants. Starting from the topography of TNTs, we illustrated the biological activity of the TNTs surface, the drugs for loading in TNTs, and the controlled and responsive release strategies of drug-loaded TNTs, respectively. At the end of this review, the shortcomings of TNTs as the drug carrier in the field of bone implants are discussed, and the development direction of this research field is also prospected.

Fluorine-incorporated TiO2 nanotopography enhances adhesion and differentiation through ERK/CREB pathway

This study compared the topography of different titanium surface structures (TiO₂ nanotube and grain) with similar elemental compositions (TiO2 and fluorine [F]) on the Ti surface. High magnification indicated that the surfaces of the control and etching groups were similar to each other in a flat, smooth form. The group anodized for 1 h was observed with TiO₂ nanotubes organized very neatly and regularly. In the group anodized for 30 min after etching, uneven wave and nanopore structures were observed. In addition, MTT assay showed that the F of the surface did not adversely affect cell viability, and the initial cell adhesion was increased in the 2.8% F‐incorporated TiO₂ nanograin. At the edge of adherent cells, filopodia were observed in spreading form on the surfaces of the anodizing and two‐step processing groups, and they were observed in a branch shape in the control and etching groups. Moreover, cell adhesion molecule and osteogenesis marker expression was increased at the F‐incorporated TiO₂ nanostructure. In addition, it was found that the expression of p‐extracellular signal‐regulated kinase (ERK) and p‐cAMP response element‐binding protein (CREB) increased in the TiO₂ nanograin with the nanopore surface compared to the micro rough and nanotube surfaces relative to the osteogenic‐related gene expression patterns. As a result, this study confirmed that the topographic structure of the surface is more affected by osteogenic differentiation than the pore size and that differentiation by specific surface composition components is by CREB. Thus, the synergy effect of osteogenic differentiation was confirmed by the simultaneous activation of CREB/ERK.

Biofunctional Elements Incorporated Nano/Microstructured Coatings on Titanium Implants with Enhanced Osteogenic and Antibacterial Performance

Bone fracture is prevalent among athletes and senior citizens and may require surgical insertion of bone implants. Titanium (Ti) and its alloys are widely used in orthopedics due to its high corrosion resistance, good biocompatibility, and modulus compatible with natural bone tissues. However, bone repair and regrowth are impeded by the insufficient intrinsic osteogenetic capability of Ti and Ti alloys and potential bacterial infection. The physicochemical properties of the materials and nano/microstructures on the implant surface are crucial for clinical success and loading with biofunctional elements such as Sr, Zn, Cu, Si, and Ag into nano/microstructured TiO2 coating has been demonstrated to enhance bone repair/regeneration and bacterial resistance of Ti implants. In this review, recent advances in biofunctional element-incorporated nano/microstructured coatings on Ti and Ti alloy implants are described and the prospects and limitations are discussed.

Synthesis of silver-cerium titanate nanotubes and their surface properties and antibacterial applications

Nano-heterostructures of titanate nanotubes were synthesized and they revealed a complex structure with the formation of TiO₂ (anatase), CeO₂, Ag₂O and metallic silver nanoparticles on the outer walls and intercalation of Ce⁴⁺ and Ag⁺ into the interlayer spaces of the nanotubes by microwave-assisted hydrothermal process and subjected to ion exchange reactions. To the best of our knowledge, this is the first reported silver and cerium co-exchanged titanate nanotubes for bio-applications. The co-ion exchange processes preserved the original tubular structure of titanate nanotubes with significant changes of the superficial as well as interlamellar environment. This study opens up possibility of synthesizing complex, functional nano-heterostructure with the scope of modification of the final structure, especially the amount and oxidation state of the intercalated cation (Ce⁴⁺, Ce³⁺ and Ag⁺) as well as the quantity and variety of the decorating nanoparticles (CeO₂, Ag₂O or metallic Ag). The interplay of which, in turn, can lead to important biological properties and applications, owing to their ion-liberation capacity. The samples were tested in antibacterial activity with two different kind of bacteria (gram positive and negative), cell cytotoxicity and adhesion, and it was found that the nano-heterostructure formed shows high antibacterial activity with low cytotoxicity and high cell adhesion, which makes it a promising material for further health applications.

Drug Delivery Systems Based on Titania Nanotubes and Active Agents for Enhanced Osseointegration of Bone Implants

TiO2 nanotubes (TNTs) are attractive nanostructures for localized drug delivery. Owing to their excellent biocompatibility and physicochemical properties, numerous functionalizations of TNTs have been attempted for their use as therapeutic agent delivery platforms. In this review, we discuss the current advances in the applications of TNT-based delivery systems with an emphasis on the various functionalizations of TNTs for enhancing osteogenesis at the bone-implant interface and for preventing implant-related infection. Innovation of therapies for enhancing osteogenesis still represents a critical challenge in regeneration of bone defects. The overall concept focuses on the use of osteoconductive materials in combination with the use of osteoinductive or osteopromotive factors. In this context, we highlight the strategies for improving the functionality of TNTs, using five classes of bioactive agents: growth factors (GFs), statins, plant derived molecules, inorganic therapeutic ions/nanoparticles (NPs) and antimicrobial compounds.

Mechanical, Biological, and Antibacterial Characteristics of Plasma-Sprayed (Sr,Zn) Substituted Hydroxyapatite Coating

Implant-related infections are a major concern in total joint prostheses, occurring up to 3% in operations. In this work, 5% Zn²⁺ was added in HA to offset bacterial activity and 5% Sr²⁺ was also incorporated as a binary dopant to reduce the cytotoxic effect of Zn²⁺. The nanosized HA powder was synthesized by the hydrothermal method and then heat-treated at 600 °C for 4 h. The heat-treated powder was plasma-sprayed on a titanium alloy Ti-6Al-4V substrate. The addition of the dopant did not significantly influence the physical and mechanical properties of the coating. However, the cytocompatibility, antimicrobial, and contact-angle properties statistically enhanced. Moreover, the (Sr,Zn)-HA coating was post-heat treated at 500 and 600 °C for 3 h. X-ray diffraction confirmed that after heat treatment phase purity and crystallinity increased and residual stress decreased. Mechanical stability was evaluated by adhesive bond strength, and the results showed that after heat-treatment bonding strength increased from 26.81 ± 2.93 to 29.84 ± 3.62 and 34.66 ± 2.57 MPa, at 500 and 600 °C, respectively. Similar to the mechanical property, antibacterial activities and biological functions are also significantly improved. More interestingly, it was also observed that the Zn²⁺ ions released from the coating depend on Ca²⁺, P, and Sr²⁺ ions while Ca²⁺, P, and Sr²⁺ ions relied on heat treatment temperatures. However, (Sr,Zn)-HA coating at 600 °C demonstrates cytotoxic effects on MC3T3-E1 cells, characterized by poor cellular morphology on the coating surface and ultimately, cell death. The doping of Sr²⁺ with Zn²⁺, therefore, can offset the cytotoxic effects and enhanced biological performance. All of the outcomes of this study signify that (Sr,Zn)-HA coating heat-treated at 500 °C showed not only excellent mechanical and biological performance but also enhanced the antibacterial properties.

The effect of a single injection of uniform-sized insulin-loaded PLGA microspheres on peri-implant bone formation

Titanium implants are widely used treatment modalities, with a long list of clinical successes in orthopaedics, orthopedics and maxillofacial surgery.