Chitosan-polyvinyl alcohol nanoscale liquid film-forming system facilitates MRSA-infected wound healing by enhancing antibacterial and antibiofilm properties

Novel Ti surface coated with PVA hydrogel and chitosan nanoparticles with antibacterial drug release: An experimental in vitro study

OBJECTIVES

The aims of this study were to design a novel titanium surface coated with a PVA hydrogel matrix and chitosan-based nanoparticles and to investigate the antibiotic release and its ability to inhibit microbial activity.

METHODS

Two drug delivery systems were developed and mixed. Chitosan-based nanoparticles (NP) and a polyvinyl alcohol film (PVA). The size, ζ-potential, stability, adhesive properties, and encapsulation profile of NP, as well as the release kinetics of drug delivery systems and their antimicrobial ability of PVA and PVANP films, were studied on Ti surfaces. The systems were loaded with doxycycline, vancomycin, and doxepin hydrochloride.

RESULTS

Nanoparticles presented a ζ-potential greater than 30 mV for 45 days and the efficiency drug encapsulation was 26.88% ± 1.51% for doxycycline, 16.09% ± 10.24% for vancomycin and 17.57% ± 11.08% for doxepin. In addition, PVA films were loaded with 125 μg/mL of doxycycline, 125 μg/mL of vancomycin, and 100 μg/mL of doxepin. PVANP-doxycycline achieved the antibacterial effect at 4 h while PVA-doxycycline maintained its effect at 24 h.

Chitosan-Based Antibacterial Films for Biomedical and Food Applications

Antibacterial chitosan films, versatile and eco-friendly materials, have garnered significant attention in both the food industry and medicine due to their unique properties, including biodegradability, biocompatibility, and antimicrobial activity. This review delves into the various types of chitosan films and their distinct applications. The categories of films discussed span from pure chitosan films to those enhanced with additives such as metal nanoparticles, metal oxide nanoparticles, graphene, fullerene and its derivatives, and plant extracts. Each type of film is examined in terms of its synthesis methods and unique properties, establishing a clear understanding of its potential utility. In the food industry, these films have shown promise in extending shelf life and maintaining food quality. In the medical field, they have been utilized for wound dressings, drug delivery systems, and as antibacterial coatings for medical devices. The review further suggests that the incorporation of different additives can significantly enhance the antibacterial properties of chitosan films. While the potential of antibacterial chitosan films is vast, the review underscores the need for future research focused on optimizing synthesis methods, understanding structure-property relationships, and rigorous evaluation of safety, biocompatibility, and long-term stability in real-world applications.

Plaster Gel Loaded with Silver Nanoparticle-Mediated Ganoderma applanatum: from Fabrication to Evaluation

Traditional Asian remedies have mainly employed the macrofungus Ganoderma applanatum, which belongs to the family Ganodermataceae, as a medicinal mushroom due to its high antibacterial and antioxidant activity. Extracts of the fungus can be synthesized into nanoparticles, which are subsequently produced as plaster gels. Synthesized silver nanoparticle-mediated G. applanatum was discovered to have the greatest ability to inhibit bacterial growth in S. epidermidis. When applied to the skin, the prepared plaster gel converted from a gel to a film; thus, both gel and film generation are characteristic of its formulation. The plaster gel that was made was found to be consistent and attractive, and the yellow color had darkened. Its viscosity and pH were appropriate for the application and allowed it to remain on the skin without dripping or reacting with the skin until it dried. A shorter duration for film formation is possible. The film's tensile was slightly reduced, and it exhibited excellent thermal stability. Decomposition of the generated film occurred at a slower rate, which constrained the polymer chain's ability to move. The semi-crystalline structure was characteristic of the film. It was found that particles were distributed in the film. Rapid release from plaster gel within 4 h was seen, and this was followed by a period of a slowly declining release rate over 12 h. The accurate first-order kinetic used to estimate the release rate of the formulation. The plaster gel demonstrated greater antibacterial activity than the MIC value indicated. The in vivo evaluation was positive and showed no skin irritation. The formulation showed good stability. Therefore, this indicated that the prepared plaster gel is appropriate for topical pharmaceutical delivery and safe for skin application.

In vitro and in vivo Evaluation of the Bioactive Nanofibers-Encapsulated Benzalkonium Bromide for Accelerating Wound Repair with MRSA Skin Infection

Purpose

Developing the ideal drug or dressing is a serious challenge to controlling the occurrence of antibacterial infection during wound healing. Thus, it is important to prepare novel nanofibers for a wound dressing that can control bacterial infections. In our study, the novel self-assembled nanofibers of benzalkonium bromide with bioactive peptide materials of IKVAV and RGD were designed and fabricated.

Methods

Different drug concentration effects of encapsulation efficacy, swelling ratio and strength were determined. Its release profile in simulated wound fluid and its cytotoxicity were studied in vitro. Importantly, the antibacterial efficacy, inhibition of biofilm formation effect and wound healing against MRSA infections in vitro and in vivo were performed after observing the tissue toxicity in vivo.

Results

It was found that the optimized drug load (0.8%) was affected by the encapsulation efficacy, swelling ratio, and strength. In addition, the novel nanofibers with average diameter (222.0 nm) and stabile zeta potential (−11.2 mV) have good morphology and characteristics. It has a delayed released profile in the simulated wound fluid and good biocompatibility with L929 cells and most tissues. Importantly, the nanofibers were shown to improve antibacterial efficacy, inhibit biofilm formation, and lead to accelerated wound healing following infection with methicillin-resistant Staphylococcus aureus.

Conclusion

These data suggest that novel nanofibers could effectively shorten the wound-healing time by inhibiting biofilm formation, which make it promising candidates for treatment of MRSA-induced wound infections.

Point your SmartPhone at the code above. If you have a QR code reader the video abstract will appear. Or use:

https://youtu.be/wBXjQQOPzyc

Pharmaceutical strategies for the treatment of bacterial biofilms in chronic wounds

Biofilms are sessile communities of microorganisms, mainly bacteria, that grow on biotic and abiotic surfaces. These microorganisms are embedded within an extracellular polymeric substance that provides enhanced protection from antimicrobials. Chronic wounds provide an ideal habitat for biofilm formation. Bacteria can easily attach to wound debris and can infect the wound due to an impaired host immune response. This review highlights the mechanism of biofilm formation and the role of biofilms in the pathophysiology of chronic wounds. Our major focus is on various formulation strategies and delivery systems that are employed to eradicate or disperse biofilms, thereby effectively managing acute and chronic wounds. We also discuss clinical research that has studied or is studying the treatment of biofilm-infected chronic wounds. Teaser: Innovative pharmaceutical strategies such as hydrogels, nanofibers, films and various nanoscale materials can provide promising approaches for the treatment of biofilm-mediated chronic wound infections, offering the potential to improve therapeutic outcomes.

Development and characterization of catechin-in-cyclodextrin-in-phospholipid liposome to eradicate MRSA-mediated surgical site infection: Investigation of their anti-infective efficacy through in vitro and in vivo studies

Methicillin-resistant Staphylococcus aureus (MRSA) is one of the prime pathogens responsible for surgical site infection (SSI). Treatment of SSI remains challenging because of resistant nature of MRSA, which is a major threat in recent years. Our previous work revealed the antibacterial potential of catechin isolated from cashewnut shell against MRSA. However, the application of catechin to treat MRSA-mediated SSI is hampered because of its poor solubility and low trans-dermal delivery. Hence, the present study focused on developing catechin-in-cyclodextrin-in-phospholipid liposome (CCPL) and evaluating its physicochemical characteristics and anti-infective efficacy through in vitro and in vivo models. Encapsulation of catechin with β-cyclodextrin and soybean lecithin was confirmed through UV-Vis spectroscopy, FTIR, and XRD techniques, while TEM imaging revealed the size of CCPL (206 nm). The CCPL displayed a higher level of water solubility (25.13%) and in vitro permeability (42.14%) compared to pure catechin. A higher level of encapsulation efficiency (98.9%) and antibacterial activity (19.8 mm of ZOI and 31.25 μg/mL of MIC) were noted in CCPL compared to the catechin/cyclodextrin complex. CCPL recorded significant and dose-dependent healing of the incision, significant reduction of bacterial count, improved epithelization, and effective prevention of inflammation in skin samples of SSI-induced Balb/c mice. Data of the present work suggest that the CCPL could be considered as a novel and potential candidate to mitigate MRSA-mediated SSI after clinical trials.

Film-Forming Systems for Dermal Drug Delivery

Film-forming formulations represent a novel form of sustained release dermatic products. They are applied to the skin as a liquid or semi-solid preparation. By evaporation of the volatile solvent on the skin, the polymer contained in the formulation forms a solid film. Various film-forming formulations were tested for their water and abrasion resistance and compared with conventional semi-solid formulations. Penetration and permeation studies of the formulations indicate a potential utility as transdermal therapeutic systems. They can be used as an alternative to patch systems to administer a variety of drugs in a topical way and may provide sustained release characteristics.

Targeting Antibacterial Effect and Promoting of Skin Wound Healing After Infected with Methicillin-Resistant Staphylococcus aureus for the Novel Polyvinyl Alcohol Nanoparticles

INTRODUCTION

Topical agents typically remain in the wound site for time duration that are too short to effectively eradicate MRSA tradition formation of BZK that can be maintained within the wound site for longer time periods, should be more effective.

METHODS

The novel chitosan and poly (D,L-lactide-co-glycoside) nanoparticles loaded with benzalkonium bromide (BZK) were designed, for the promotion wound healing after MRSA infection. The physical characterization of these nanoparticles, as well as their antibacterial activity in vitro, release profile in simulated wound fluid, cell toxicity, anti-biofilm activity, and their ability to improve the skin wound healing in a mouse model were also studied.

RESULTS

These novel nanoparticles were found to have a significant antibacterial activity (p<0.01), both in vitro and in vivo test. The stronger anti-biofilm ability of the nanoparticles to inhibit the formation of bacterial biofilms, at a concentration of 3.33 μg/mL, and clear existing bacterial biofilms, at a concentration of 5 mg/mL, compared with its water solution. In addition, significant damage to bacterial cell walls also was found, providing insight into the mechanism of antibacterial activity.

CONCLUSION

Taken together, these results demonstrated the ability of BZK-loaded nanoparticles in the promotion of skin wound healing with MRSA infection. The current findings open a new avenue for nanomedicine development and future clinical applications in the treatment of wounds.

Flexible electrical stimulation device with Chitosan-Vaseline® dressing accelerates wound healing in diabetes

The healing process of diabetic wounds is typically disordered and prolonged and requires both angiogenesis and epithelialization. Disruptions of the endogenous electric fields (EFs) may lead to disordered cell migration. Electrical stimulation (ES) that mimics endogenous EFs is a promising method in treating diabetic wounds; however, a microenvironment that facilitates cell migration and a convenient means that can be used to apply ES are also required. Chitosan-Vaseline® gauze (CVG) has been identified to facilitate wound healing; it also promotes moisture retention and immune regulation and has antibacterial activity. For this study, we created a wound dressing using CVG together with a flexible ES device and further evaluated its potential as a treatment for diabetic wounds. We found that high voltage monophasic pulsed current (HVMPC) promoted healing of diabetic wounds in vivo. In studies carried out in vitro, we found that HVMPC promoted the proliferation and migration of human umbilical vein endothelial cells (HUVECs) by activating PI3K/Akt and ERK1/2 signaling. Overall, we determined that the flexible ES-chitosan dressing may promoted healing of diabetic wounds by accelerating angiogenesis, enhancing epithelialization, and inhibiting scar formation. These findings provide support for the ongoing development of this multidisciplinary product for the care and treatment of diabetic wounds.

Preparation of amphiphilic magnetic polyvinyl alcohol targeted drug carrier and drug delivery research

Currently, magnetic applications have great potential for development in the field of drug carriers. In this paper, Fe₃O₄-PVA@SH, an amphiphilic magnetically targeting drug carrier, was prepared by using Fe₃O₄ and PVA with thiohydrazide-iminopropyltriethoxysilane(TIPTS). The loading capacity of Fe₃O₄-PVA@SH on Aspirin and the drug release kinetics of loaded drugs were studied. The obtained Fe₃O₄-PVA@SH exhibits excellent drug release properties in simulating the human body fluid environment (pH 7.2). Since magnetically targeting drug carriers are readily available and have excellent biocompatibility and the characteristics of drug release. This work’s development, preparing amphiphilic magnetically targeting drug carriers in drug delivery and other fields, has great significance.

Rational selection of antifungal drugs to propose a new formulation strategy to control Candida biofilm formation on venous catheters

INTRODUCTION

Infections associated with medical devices are often related to colonization by Candida spp. biofilm; in this way, numerous strategies have been developed and studied, mainly in order to prevent this type of fungal growth.

AIM

Considering the above, the main objective of the present study is to make a rational choice of the best antifungal therapy for the in vitro treatment of the biofilm on venous catheters, proposing an innovative formulation of a film-forming system to coat the surface in order to prevent the formation of biofilms.

METHODOLOGY

Anidulafungin, fluconazole, voriconazole, ketoconazole, amphotericin B, and the association of anidulafungin and amphotericin B were tested against biofilms of C. albicans, C. tropicalis, and C. parapsilosis strains in microtiter plates and in a polyurethane catheter. Besides, anidulafungin, amphotericin B, and the combination of both were incorporated in a film-forming system and were evaluated against biofilm.

RESULTS

The superior activity of anidulafungin was demonstrated in relation to the other antifungal agents. Although amphotericin B showed good activity, high concentrations were required. The combination showed a synergistic action, in solution and in the formulation, showing excellent results, with activity above 90%.

CONCLUSION

Due to the superiority of anidulafungin and the synergistic activity of the combination, these alternatives were the most promising options for use in a formulation proposal as a new strategy to combat the Candida spp. biofilm. These formulations demonstrated high in vitro performance in the prevention of biofilms, indicating that they are candidates with great potential for in vivo tests.

Antibiotic Delivery Strategies to Treat Skin Infections When Innate Antimicrobial Defense Fails

The epidermal skin barrier protects the body from a host of daily challenges, providing protection against mechanical insults and the absorption of chemicals and xenobiotics. In addition to the physical barrier, the epidermis also presents an innate defense against microbial overgrowth. This is achieved through the presence of a diverse collection of microorganisms on the skin (the "microbiota") that maintain a delicate balance with the host and play a significant role in overall human health. When the skin is wounded, the local tissue with a compromised barrier can become colonized and ultimately infected if bacterial growth overcomes the host response. Wound infections present an immense burden in healthcare costs and decreased quality of life for patients, and treatment becomes increasingly important because of the negative impact that infection has on slowing the rate of wound healing. In this review, we discuss specific challenges of treating wound infections and the advances in drug delivery platforms and formulations that are under development to improve topical delivery of antimicrobial treatments.

Controlled Release Film Forming Systems in Drug Delivery: The Potential for Efficient Drug Delivery

Despite many available approaches for transdermal drug delivery, patient compliance and drug targeting at the desired concentration are still concerns for effective therapies. Precise and efficient film-forming systems provide great potential for controlling drug delivery through the skin with the combined advantages of films and hydrogels. The associated disadvantages of both systems (films and hydrogels) will be overcome in film-forming systems. Different strategies have been designed to control drug release through the skin, including changes to film-forming polymers, plasticizers, additives or even model drugs in formulations. In the current review, we aim to discuss the recent advances in film-forming systems to provide the principles and review the methods of these systems as applied to controlled drug release. Advances in the design of film-forming systems open a new generation of these systems.