A novel spray-dried nanoparticles-in-microparticles system for formulating scopolamine hydrobromide into orally disintegrating tablets

Exploring novel type of lipid-bases drug delivery systems that contain one lipid and one water-soluble surfactant only

None of transitional lipid-based drug delivery systems (LBDDS) includes compositions containing one lipid and one water-soluble surfactant that form stable microemulsions. The conversion of liquid LBDDS to solid LBDDS has been limited by low drug loading. Previously, we have developed drug solid microemulsions containing one lipid and TPGS (a water-soluble surfactant) that achieved high drug loading and remarkably increased oral bioavailability. This study aimed to test if binary lipid systems (BLS), composed of one lipid and one water-soluble surfactant that form stable self-emulsifying microemulsions, is not an exclusive but widely applicable type of LBDDS for other lipids and surfactants and evaluate the influences of chemical structures of lipids and surfactants on microemulsions and solid microemulsions. We systemically identified new BLS by using a library of lipids and surfactants. Propylene glycol diesters and glycerol triesters were favorable for forming stable microemulsions with Tween 80, Cremophor EL, or TPGS. To the best of our knowledge, this is the first report exploring and confirming that the BLS is a new addition to traditional LBDDS, provides a promising option for researchers, and has the potential to increase drug loading to facilitate the development of solid microemulsions.

Tabletized Nanomedicine: From the Current Scenario to Developing Future Medicine

The limitations of conventional therapeutic treatments prevailed in the development of nanotechnology-based medical formulations, termed nanomedicine. Nanomedicine is an advanced medicine that often consists of therapeutic agent(s) embedded in biodegradable or biocompatible nanomaterial-based formulations. Among nanomedicine approaches, tablet (oral) nanomedicine is still under development. In tabletized nanomedicine, the dynamic interplay between nanoformulations and the intricate milieu of the gastrointestinal tract simulates a pivotal role, particularly accentuating the influence exerted upon the luminal, mucosal, and epithelial cells. In this work, we document the perspectives and opportunities of nanoformulations toward the development of tabletized nanomedicine. This review also unveils the notion of integrating nanomedicine within a tablet formulation, which facilitates the controlled release of drugs, biomolecules, and agent(s) from the formulation to achieve a better therapeutic response. Finally, an attempt was made to explore current trends in nanomedicine technology such as bacteriophage, probiotic, and oligonucleotide tabletized nanomedicine and the combination of nanomedicine with imaging agents, i.e., nanotheranostics.

Orally Dispersible Dosage Forms for Paediatric Use: Current Knowledge and Development of Nanostructure-Based Formulations

The paediatric population has always suffered from a lack of medicines tailored to their needs, especially in terms of accurate dosage, stability and acceptability. Orodispersible dosage forms have gone through a resurrection as an alternative to liquid formulations or fractioned solid formulations, although they are still subject to several inconveniences, among which the unpleasant taste and the low oral bioavailability of the API are the most significant hurdles in the way of achieving an optimal drug product. Nanostructures can address these inconveniences through their size and variety, owing to the plethora of materials that can be used in their manufacturing. Through the formation and functionalisation of nanostructures, followed by their inclusion in orodispersible dosage forms, safe, stable and acceptable medicines intended for paediatric use can be developed.

Development of In Situ Self-Assembly Nanoparticles to Encapsulate Lopinavir and Ritonavir for Long-Acting Subcutaneous Injection

Most antiretroviral medications for human immunodeficiency virus treatment and prevention require high levels of patient adherence, such that medications need to be administered daily without missing doses. Here, a long-acting subcutaneous injection of lopinavir (LPV) in combination with ritonavir (RTV) using in situ self-assembly nanoparticles (ISNPs) was developed to potentially overcome adherence barriers. The ISNP approach can improve the pharmacokinetic profiles of the drugs. The ISNPs were characterized in terms of particle size, drug entrapment efficiency, drug loading, in vitro release study, and in vivo pharmacokinetic study. LPV/RTV ISNPs were 167.8 nm in size, with a polydispersity index of less than 0.35. The entrapment efficiency was over 98% for both LPV and RTV, with drug loadings of 25% LPV and 6.3% RTV. A slow release rate of LPV was observed at about 20% on day 5, followed by a sustained release beyond 14 days. RTV released faster than LPV in the first 5 days and slower than LPV thereafter. LPV trough concentration remained above 160 ng/mL and RTV trough concentration was above 50 ng/mL after 6 days with one subcutaneous injection. Overall, the ISNP-based LPV/RTV injection showed sustained release profiles in both in vitro and in vivo studies.

Improvement of Drug Delivery Properties of Risperidone via Preparation of Fast Dissolution Tablet Containing Nanostructured Microparticles

Aimed to improve the dissolution profile of risperidone and increase the compliance of psychotic patients, we designed a fast dissolution tablet (FDT) containing nanoparticles. Risperidone nanoparticles were prepared by the acid-alkali neutralization method, and their size and stability were evaluated. Spray freeze-drying (SFD) process was then employed to fabricate the nanoaggregates using sugars. The physicochemical properties of the dried powders were assessed. Finally, nanoaggregates were compressed into tablets, and their properties were evaluated. The results show that the synergic effect of cremophore EL and hydroxypropyl methyl cellulose E₁₅ can give rise to the formation of risperidone nanosuspension with the particle size of 188 nm. Moreoevr, it is shown that the fabrication of risperidone nanoaggregate enhanced the drug dissolution and decreased that to 2 min, which is faster than coarse risperidone powder (with dissolution time of 60 min). The formulations of FDT containing 9.5% of sodium starch glycolate and 83.2% microcrystalline cellulose were selected with a disintegration time of less than 30 s and a dissolution time of 10 min. This investigation shows that the preparation of FDT containing nanoparticles using SFD is an easy and feasible method for improving the dissolution profile of many drugs with low solubility.

Solid lipid nanoparticles with enteric coating for improving stability, palatability, and oral bioavailability of enrofloxacin

Background

The poor palatability, variable oral bioavailability, stimulation to gastric mucosa, and light instability limited the application of enrofloxacin (ENR). The enteric granules combining solid lipid nanoparticles (SLNs) with enteric coating were explored to overcome these disadvantages.

Materials and methods

ENR-loaded SLNs were produced by a hot homogenization and ultrasonic emulsification method and the enteric granules with SLNs as inner core were prepared by wet granulation followed by coating using polyacrylic resin II (PRII). The formulation was optimized by using orthogonal or single factor test screening.

Results

The optimal SLNs with loading capacity (LC) and price as inspection indexes were consisted of 10 mL 3% polyvinyl alcohol per 0.8 g ENR and 2.4 g octadecanoic acid. The sizes, LC, polydispersion index, and zeta potential of the SLNs were 308.5±6.3 nm, 15.73%±0.31%, 0.352±0.015, and −22.3 mv, respectively. The best enteric granules were used 15% PRII as coating materials. The release of the enteric granules in simulated intestine fluid (SIF, pH=8) was significantly faster than in simulated gastric fluid (SGF, pH=2) and simultaneously slower than those of SLNs and native ENR. The granules showed good stability in influencing factor experiment. The granules displayed a similar daily feed intake as the control group and higher daily feed intake than ENR powder and single-coating granules. Compared to the ENR soluble powder, the area under the plasma concentration–time curve and mean retention time of the enteric granules after intragastric administration were increased from 4.26±0.85 µg h/mL and 6.80±2.28 hours to 11.24±3.33 µg h/mL and 17.97±4.01 hours, respectively.

Conclusion

The enteric granules combination SLNs with enteric coating significantly improved the stability, palatability, sustained-release performance and oral bioavailability of ENR. The novel technology will be a potential measure to overcome the similar disadvantages of other drugs.

Colonic delivery of indometacin loaded PGA-co-PDL microparticles coated with Eudragit L100-55 from fast disintegrating tablets

The aim of this work was to investigate the efficient targeting and delivery of indometacin (IND), as a model anti-inflammatory drug to the colon for treatment of inflammatory bowel disease. We prepared fast disintegrating tablets (FDT) containing IND encapsulated within poly(glycerol-adipate-co-ɷ-pentadecalactone), PGA-co-PDL, microparticles and coated with Eudragit L100-55 at different ratios (1:1.5, 1:1, 1:0.5). Microparticles encapsulated with IND were prepared using an o/w single emulsion solvent evaporation technique and coated with Eudragit L-100-55 via spray drying. The produced coated microparticles (PGA-co-PDL-IND/Eudragit) were formulated into optimised FTD using a single station press. The loading, in vitro release, permeability and transport of IND from PGA-co-PDL-IND/Eudragit microparticles was studied in Caco-2 cell lines. IND was efficiently encapsulated (570.15±4.2μg/mg) within the PGA-co-PDL microparticles. In vitro release of PGA-co-PDL-IND/Eudragit microparticles (1:1.5) showed significantly (p<0.05, ANOVA/Tukey) lower release of IND 13.70±1.6 and 56.46±3.8% compared with 1:1 (89.61±2.5, 80.13±2.6%) and 1:0.5 (39.46±0.9 & 43.38±3.12) after 3 and 43h at pH 5.5 and 6.8, respectively. The permeability and transport studies indicated IND released from PGA-co-PDL-IND/Eudragit microparticles had a lower permeability coefficient of 13.95±0.68×10^-6cm/s compared to free IND 23.06±3.56×10^-6cm/s. These results indicate the possibility of targeting anti-inflammatory drugs to the colon using FDTs containing microparticles coated with Eudragit.

Novel in situ self-assembly nanoparticles for formulating a poorly water-soluble drug in oral solid granules, improving stability, palatability, and bioavailability

PURPOSE

The purpose of this study was to develop a novel lipid-based nanotechnology to formulate poorly water-soluble drugs in oral solid granules to improve stability, palatability, and bioavailability.

MATERIALS AND METHODS

In one method, we prepared ritonavir (RTV) nanoparticles (NPs) by a microemulsion-precursor method and then converted the RTV NPs to solid granules by wet granulation to produce RTV NP-containing granules. In the other innovative method, we did not use water in the formulation preparation, and discovered novel in situ self-assembly nanoparticles (ISNPs). We prepared RTV ISNP granules that did not initially contain NPs, but spontaneously produced RTV ISNPs when the granules were introduced to water with gentle agitation. We fully characterized these RTV nanoformulations. We also used rats to test the bioavailability of RTV ISNP granules. Finally, an Astree electronic tongue was used to assess the taste of the RTV ISNP granules.

RESULTS

RTV NP-containing granules only had about 1% drug loading of RTV in the solid granules. In contrast, RTV ISNP granules achieved over 16% drug loading and were stable at room temperature over 24 weeks. RTV ISNPs had particle size between 160 nm and 300 nm with narrow size distribution. RTV ISNPs were stable in simulated gastric fluid for 2 hours and in simulated intestinal fluid for another 6 hours. The data from the electronic tongue showed that the RTV ISNP granules were similar in taste to blank ISNP granules, but were much different from RTV solution. RTV ISNP granules increased RTV bioavailability over 2.5-fold compared to RTV solution.

CONCLUSION

We successfully discovered and developed novel ISNPs to manufacture RTV ISNP granules that were reconstitutable, stable, and palatable, and improved RTV bioavailability. The novel ISNP nanotechnology is a platform to manufacture oral solid dosage forms for poorly water-soluble drugs, especially for pediatric formulation development.

Development of Novel Chitosan Microcapsules for Pulmonary Delivery of Dapsone: Characterization, Aerosol Performance, and In Vivo Toxicity Evaluation

Pneumocystis carinii pneumonia (PCP) is a major opportunistic infection that affects patients with human immunodeficiency virus. Although orally administered dapsone leads to high hepatic metabolism, decreasing the therapeutic index and causing severe side effects, this drug is an effective alternative for the treatment of PCP. In this context, microencapsulation for pulmonary administration can offer an alternative to increase the bioavailability of dapsone, reducing its adverse effects. The aim of this work was to develop novel dapsone-loaded chitosan microcapsules intended for deep-lung aerosolized drug delivery. The geometric particle size (D 4,3) was approximately 7 μm, the calculated aerodynamic diameter (d aero) was approximately 4.5 μm, and the mass median aerodynamic diameter from an Andersen cascade impactor was 4.7 μm. The in vitro dissolution profile showed an efficient dapsone encapsulation, demonstrating the sustained release of the drug. The in vitro deposition (measured by the Andersen cascade impactor) showed an adequate distribution and a high fine particles fraction (FPF = 50%). Scanning electron microscopy of the pulmonary tissues demonstrated an adequate deposition of these particles in the deepest part of the lung. An in vivo toxicity experiment showed the low toxicity of the drug-loaded microcapsules, indicating a protective effect of the microencapsulation process when the particles are microencapsulated. In conclusion, the pulmonary administration of the novel dapsone-loaded microcapsules could be a promising alternative for PCP treatment.

Nano and Microparticulate Chitosan Based System for Formulation of Carvedilol Rapid Melt Tablet

PURPOSE

In the present study rapid melt tablets (RMT's) of carvedilol were prepared by using ionotropic-gelated chitosan nanoparticles using a spray-drying method. Carvedilol is beta-adrenergic antagonist and its oral bioavailability is about 25-35% because of first pass metabolism.

METHODS

The spray-dried microparticles were formulated into RMT's using a wet granulation process. The Formulation and optimization of carvedilol loaded RMTs using nano and microparticulate chitosan based system (NMCS) was done by using 32 factorial designs.

RESULTS

Drug entrapment efficiency of about 64.9 % (w/w) and loading capacity of 14.44% (w/w) were achieved for the microparticles, which were ranged from 1 μm to 4 μm in diameter. RESULTS of disintegration tests showed that the formulated RMTs could be completely dissolved within 40 seconds. Dissolution studies suggested that Carvedilol is released more slowly from tablets made using the microencapsulation process compared with tablets containing Carvedilol that is free or in the form of nanoparticles.

CONCLUSION

RESULTS shown that the development of new RMTs designed with crosslinked microparticle might be a rational way to overcome the unwanted taste of conventional RMTs and the side effects related to Carvedilol intrinsic characteristics. The development of Carvedilol NMCS using ludiflash as RMTs could be used as a promising approach for improving the solubility and oral bioavailability of water insoluble drug.

Triggering effect of N-acetylglucosamine on retarded drug release from a lectin-anchored chitosan nanoparticles-in-microparticles system

The aim of this study was to investigate the use of N-acetylglucosamine (NAG) to accelerate drug release from a lectin-modified carrier. A wheat germ agglutinin (WGA)-anchored salmeterol xinafoate (SalX)-loaded nanoparticles-in-microparticles system (NiMS) was prepared with an ionotropic gelation technique combined with a spray drying method. The formulated microparticles were spherical, with diameters ranging mainly from 2 to 8 μm; the drug entrapment efficiency was >70% (w/w), and the loading capacity was approximately 8% (w/w). Drug release from WGA-SalX-NiMS, within the first 4h, was approximately 30% less than that from SalX-NiMS, indicating an effect of lectin-modification to retard drug release from the NiMS. Due to "sugar-lectin" interactions, drug release from WGA-SalX-NiMS was substantially increased after the addition of NAG to the release medium. However, no significant influence of NAG was observed on the drug release profile of SalX-NiMS without WGA anchorage. The characteristics of NAG-WGA interaction may provide valuable insights into the "triggering-effects" of specific sugars on drug release from lectin-anchored carriers. These results suggest that it is possible to control drug release from a lectin-anchored drug delivery system using a specific sugar, and that the designed novel WGA-SalX-NiMS may be a suitable formulation for chronotherapy of asthma.

Production of nanoparticles-in-microparticles by a double emulsion method: a comprehensive study

A method based on a double emulsion system (solid-in-water-in-oil-in-water) has been developed for the production of nanoparticles-in-microparticles (NIMs). The distribution of nanoparticles within the NIMs was explored using light and electron microscopy and through assessment of drug loading and release profiles. The extent of nanoparticle entrapment within the NIMs was found to be dependent on the state (wet vs. dry) in which the nanoparticles were introduced to the formulation. The technique was readily adaptable to produce NIMs of different morphologies. It is proposed that NIMs and this method to produce them have broad application in drug delivery research.