Enzymatic Synthesis of Ricinoleyl Hydroxamic Acid Based on Commercial Castor Oil, Cytotoxicity Properties and Application as a New Anticancer Agent

Investigating a novel therapeutic composition for dry eye syndrome management: In vitro and in vivo studies

Dry eye syndrome (DES) presents a significant challenge in ophthalmic care, necessitating innovative approaches for effective management. This research article introduces a multifaceted strategy to address DES through the development of ocular inserts utilizing advanced technologies such as hot-melt extrusion (HME) and the CaliCut post-extrusion system. The formulation includes key ingredients targeting different layers of the tear film and associated inflammation, including hydroxypropyl cellulose (HPC), polyethylene glycol (PEG), castor oil, and dexamethasone. The study incorporates a Design of Experiments (DoE) approach, integrating HME and the precise stretching and cutting technique of CaliCut for manufacturing consistency and dimensional control of the inserts. The developed insert(s) have been systematically characterized for their physicochemical properties, release profile, and in vivo efficacy. In silico molecular docking studies have also been conducted to assess the binding affinities of formulation components with ocular mucin, elucidating their binding affinities. Preliminary results demonstrate promising potential for the developed insert in managing DES, offering preservative-free treatment, sustained drug delivery, and improved patient compliance. This study highlights the integration of advanced technologies and formulation strategies in ocular drug delivery for effective DES management.

Precise Fabrication of Ocular Inserts Using an Innovative Laser-Driven CaliCut Technology: In Vitro and in Vivo Evaluation

Ocular inserts offer distinct advantages, including a preservative-free drug delivery system, the ability to provide tailored drug release, and ease of administration. The present research paper delves into the development of an innovative ocular insert using CaliCut technology. Complementing the hot melt extrusion (HME) process, CaliCut, an advanced technology in ocular insert development, employs precision laser gauging to achieve impeccable cutting of inserts with desired dimensions. Its intelligent control over the stretching process through auto feedback-based belt speed adjustment ensures unparalleled accuracy and consistency in dosage form manufacturing. Dry eye disease (DED) poses a significant challenge to ocular health, necessitating innovative approaches to alleviate its symptoms. In this pursuit, castor oil has emerged as a promising therapeutic agent, offering beneficial effects by increasing the thickness of the lipid layer in the tear film, thus improving tear film stability, and reducing tear evaporation. To harness these advantages, this study focuses on the development and comprehensive characterization of castor oil-based ocular inserts. Additionally, in-vivo irritancy evaluation in rabbits has been undertaken to assess the inserts' safety and biocompatibility. By harnessing the HME and CaliCut techniques in the formulation process, the study demonstrates their instrumental role in facilitating the successful development of ocular inserts.

Synthesis and evaluation of antibacterial activity of transition metal-oleoyl amide complexes

Recent studies show that some metal ions, injure microbial cells in various ways due to membrane breakdown, protein malfunction, and oxidative stress. Metal complexes are suited for creating novel antibacterial medications due to their distinct mechanisms of action and the variety of three-dimensional geometries they can acquire. In this Perspective, the present study focused on new antibacterial strategies based on metal oleoyl amide complexes. Thus, oleoyl amides ligand (fatty hydroxamic acid and fatty hydrazide hydrate) with the transition metal ions named Ag (I), Co (II), Cu (II), Ni (II) and Sn (II) complexes were successfully synthesized in this study. The metals- oleoyl amide were characterized using elemental analysis, and fourier transforms infrared (FTIR) spectroscopy. The antibacterial effect of metals- oleoyl amide complexes was investigated for Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus) by analysing minimum inhibitory concentration (MIC), minimal bactericidal concentration (MBC), and scanning electron microscopy (SEM). The results showed that metal-oleoyl amide complexes have high antibacterial activity at low concentrations. This study inferred that metal oleoyl amide complexes could be utilised as a promising therapeutic antibacterial agent.

Synthesis, DFT study, theoretical and experimental spectroscopy of fatty amides based on extra-virgin olive oil and their antibacterial activity

Medication products from natural materials are preferred due to their minimal side effects. Extra-virgin olive oil (EVOO) is a highly acclaimed Mediterranean diet and a common source of lipids that lowers morbidity and disease severity. This study synthesised two fatty amides from EVOO: hydroxamic fatty acids (FHA) and fatty hydrazide hydrate (FHH). The Density Functional Theory (DFT) was applied to quantum mechanics computation. Nuclear magnetic resonance (NMR), Fourier transforms infrared (FTIR), and element analysis were used to characterise fatty amides. Likewise, the minimum inhibitory concentration (MIC) and timing kill assay were determined. The results revealed that 82 % for FHA and 80 % for FHH conversion were achieved. The amidation reagent/EVOO ratio (mmol: mmol) was 7:1, using the reaction time of 12 h and hexane as an organic solvent. The results further revealed that fatty amides have high antibacterial activity with low concentration at 0.04 μg/mL during eight h of FHA and 0.3 μg/mL during ten h of FHH. This research inferred that FHA and FHH could provide an alternative and effective therapeutic strategy for bacterial diseases. Current findings could provide the basis for the modernisation/introduction of novel and more effective antibacterial drugs derived from natural products.

Preparation and characterization of wet adhesives based on (poly (vinyl butyral-co-vinyl alcohol-co-vinyl acetate)/castor oil/styrene butadiene rubber) using gamma irradiation for trapping of reptiles and rodents

Wet adhesives from poly (vinyl butyral-co-vinyl alcohol-co-vinyl acetate), castor oil, and styrene butadiene rubber were prepared at variable compositions. These components were exposed to a certain range of irradiation dose for γ-rays. Wet adhesives were characterized by adhesion force, Fourier transform infrared, thermogravimetric analysis and derivative thermal gravimetric, gel permeation chromatography, proton nuclear magnetic resonance spectroscopy and scan electron microscopy. Results declared that dose and composition have significant effect on features of wet adhesives. Further, the adhesion force and thermal stability of wet adhesives improved by increasing the irradiation dose. Moreover, the adhesion force reached ~ 690 (kPa). The analysis of gel permeation chromatography showed that molecular weight of wet adhesive 48,921 (g/mol). The wet adhesives were exploited to trap reptiles and rodents. Through the results, it can be observed that the wet adhesives had good efficiency for trapping the reptiles and rodents. The results showed that the best sample of wet adhesive was from 98% of [poly (vinyl butyral-co-vinyl alcohol-co-vinyl (10%)/castor oil (90%))] to [2% of styrene butadiene rubber] at 30 kGy In conclusion, this study referred that this type of wet adhesive has an excellent ability to adhere and trap of reptiles and rodents such as geckos and mice respectively. Consequently, these wet adhesives could be utilized in pilot scale.

Fabrication of cellulose nanocrystals as potential anticancer drug delivery systems for colorectal cancer treatment

Polysaccharide nanocrystals have great potential to be used as improved drug carriers due to their low cost, high biodegradability, and biocompatibility. This study reports the synthesis of cellulose nanocrystals (CNC) loaded with 5-fluorouracil (CNC/5FU) to evaluate their anticancer activity against colorectal cancer cells. X-ray and Fourier-transform infrared spectroscopy demonstrated that acid hydrolysis successfully degraded the amorphous cellulose to liberate the crystal regions. From transmission electron microscopy, CNC/5FU appeared as rod-like nanocrystals with an average length and width of 69.53 ± 1.14 nm and 8.13 ± 0.72 nm, respectively. The anticancer drug 5FU showed improved thermal stability after being loading onto CNC. From UV-vis spectroscopy data, the drug encapsulation efficiency in CNC/5FU was estimated to be 83.50 ± 1.52%. The drug release of CNC/5FU was higher at pH 7.4 compared to those at pH 4.2 and 1.2. From the cytotoxicity assays, CNC did not affect the viability of CCD112 colon normal cells. On the other hand, CNC/5FU exhibited anticancer effects against HCT116 and HT-29 colorectal cancer cells. The anticancer actions of CNC/5FU against HCT116 cells were then confirmed using an in vitro tumor-on-chip model and clonogenic assay. Mechanistic studies demonstrated that CNC/5FU killed the cancer cells by mainly inducing cell apoptosis and mitochondrial membrane damage. Overall, this study indicated that CNC/5FU could be a potential nanoformulation for improved drug delivery and colorectal cancer treatment.