Closing the gap: accelerating the translational process in nanomedicine by proposing standardized characterization techniques

Vaginal Nanoformulations for the Management of Preterm Birth

Preterm birth (PTB) is a leading cause of infant morbidity and mortality in the world. In 2020, 1 in 10 infants were born prematurely in the United States. The World Health Organization estimates that a total of 15 million infants are born prematurely every year. Current therapeutic interventions for PTB have had limited replicable success. Recent advancements in the field of nanomedicine have made it possible to utilize the vaginal administration route to effectively and locally deliver drugs to the female reproductive tract. Additionally, studies using murine models have provided important insights about the cervix as a gatekeeper for pregnancy and parturition. With these recent developments, the field of reproductive biology is on the cusp of a paradigm shift in the context of treating PTB. The present review focuses on the complexities associated with treating the condition and novel therapeutics that have produced promising results in preclinical studies.

Designing Functional Bionanoconstructs for Effective In Vivo Targeting

The progress achieved over the last three decades in the field of bioconjugation has enabled the preparation of sophisticated nanomaterial–biomolecule conjugates, referred to herein as bionanoconstructs, for a multitude of applications including biosensing, diagnostics, and therapeutics. However, the development of bionanoconstructs for the active targeting of cells and cellular compartments, both in vitro and in vivo, is challenged by the lack of understanding of the mechanisms governing nanoscale recognition. In this review, we highlight fundamental obstacles in designing a successful bionanoconstruct, considering findings in the field of bionanointeractions. We argue that the biological recognition of bionanoconstructs is modulated not only by their molecular composition but also by the collective architecture presented upon their surface, and we discuss fundamental aspects of this surface architecture that are central to successful recognition, such as the mode of biomolecule conjugation and nanomaterial passivation. We also emphasize the need for thorough characterization of engineered bionanoconstructs and highlight the significance of population heterogeneity, which too presents a significant challenge in the interpretation of in vitro and in vivo results. Consideration of such issues together will better define the arena in which bioconjugation, in the future, will deliver functional and clinically relevant bionanoconstructs.

Novel Methods and Approaches for Safety Evaluation of Nanoparticle Formulations: A Focus Towards In Vitro Models and Adverse Outcome Pathways

Nanotoxicology is an emerging field employed in the assessment of unintentional hazardous effects produced by nanoparticles (NPs) impacting human health and the environment. The nanotoxicity affects the range between induction of cellular stress and cytotoxicity. The reasons so far reported for these toxicological effects are due to their variable sizes with high surface areas, shape, charge, and physicochemical properties, which upon interaction with the biological components may influence their functioning and result in adverse outcomes (AO). Thus, understanding the risk produced by these materials now is an important safety concern for the development of nanotechnology and nanomedicine. Since the time nanotoxicology has evolved, the methods employed have been majorly relied on in vitro cell-based evaluations, while these simple methods may not predict the complexity involved in preclinical and clinical conditions concerning pharmacokinetics, organ toxicity, and toxicities evidenced through multiple cellular levels. The safety profiles of nanoscale nanomaterials and nanoformulations in the delivery of drugs and therapeutic applications are of considerable concern. In addition, the safety assessment for new nanomedicine formulas lacks regulatory standards. Though the in vivo studies are greatly needed, the end parameters used for risk assessment are not predicting the possible toxic effects produced by various nanoformulations. On the other side, due to increased restrictions on animal usage and demand for the need for high-throughput assays, there is a need for developing and exploring novel methods to evaluate NPs safety concerns. The progress made in molecular biology and the availability of several modern techniques may offer novel and innovative methods to evaluate the toxicological behavior of different NPs by using single cells, cell population, and whole organisms. This review highlights the recent novel methods developed for the evaluation of the safety impacts of NPs and attempts to solve the problems that come with risk assessment. The relevance of investigating adverse outcome pathways (AOPs) in nanotoxicology has been stressed in particular.

Identification of physicochemical properties that modulate nanoparticle aggregation in blood

Inorganic materials are receiving significant interest in medicine given their usefulness for therapeutic applications such as targeted drug delivery, active pharmaceutical carriers and medical imaging. However, poor knowledge of the side effects related to their use is an obstacle to clinical translation. For the development of molecular drugs, the concept of safe-by-design has become an efficient pharmaceutical strategy with the aim of reducing costs, which can also accelerate the translation into the market. In the case of materials, the application these approaches is hampered by poor knowledge of how the physical and chemical properties of the material trigger the biological response. Hemocompatibility is a crucial aspect to take into consideration for those materials that are intended for medical applications. The formation of nanoparticle agglomerates can cause severe side effects that may induce occlusion of blood vessels and thrombotic events. Additionally, nanoparticles can interfere with the coagulation cascade causing both pro- and anti-coagulant properties. There is contrasting evidence on how the physicochemical properties of the material modulate these effects. In this work, we developed two sets of tailored carbon and silica nanoparticles with three different diameters in the 100-500 nm range with the purpose of investigating the role of surface curvature and chemistry on platelet aggregation, activation and adhesion. Substantial differences were found in the composition of the protein corona depending on the chemical nature of the nanoparticles, while the surface curvature was found to play a minor role. On the other hand, large carbon nanoparticles (but not small carbon nanoparticles or silica nanoparticles) have a clear tendency to form aggregates both in plasma and blood. This effect was observed both in the presence or absence of platelets and was independent of platelet activation. Overall, the results presented herein suggest the existence of independent modes of action that are differently affected by the physicochemical properties of the materials, potentially leading to vessel occlusion and/or formation of thrombi in vivo.

Evaluating nanomedicine with microfluidics

Nanomedicines are engineered nanoscale structures that have an extensive range of application in the diagnosis and therapy of many diseases. Despite the rapid progress in and tremendous potential of nanomedicines, their clinical translational process is still slow, owing to the difficulty in understanding, evaluating, and predicting their behavior in complex living organisms. Microfluidic techniques offer a promising way to resolve these challenges. Carefully designed microfluidic chips enable in vivo microenvironment simulation and high-throughput analysis, thus providing robust platforms for nanomedicine evaluation. Here, we summarize the recent developments and achievements in microfluidic methods for nanomedicine evaluation, categorized into four sections based on their target systems: single cell, multicellular system, organ, and organism levels. Finally, we provide our perspectives on the challenges and future directions of microfluidics-based nanomedicine evaluation.

Practical guide to characterize biomolecule adsorption on solid surfaces (Review)

The control over the adsorption or grafting of biomolecules from a liquid to a solid interface is of fundamental importance in different fields, such as drug delivery, pharmaceutics, diagnostics, and tissue engineering. It is thus important to understand and characterize how biomolecules interact with surfaces and to quantitatively measure parameters such as adsorbed amount, kinetics of adsorption and desorption, conformation of the adsorbed biomolecules, orientation, and aggregation state. A better understanding of these interfacial phenomena will help optimize the engineering of biofunctional surfaces, preserving the activity of biomolecules and avoiding unwanted side effects. The characterization of molecular adsorption on a solid surface requires the use of analytical techniques, which are able to detect very low quantities of material in a liquid environment without modifying the adsorption process during acquisition. In general, the combination of different techniques will give a more complete characterization of the layers adsorbed onto a substrate. In this review, the authors will introduce the context, then the different factors influencing the adsorption of biomolecules, as well as relevant parameters that characterize their adsorption. They review surface-sensitive techniques which are able to describe different properties of proteins and polymeric films on solid two-dimensional materials and compare these techniques in terms of sensitivity, penetration depth, ease of use, and ability to perform "parallel measurements."

Influence of different cleaning processes on the surface chemistry of gold nanoparticles

In this paper, the authors have investigated the effects of different cleaning methods (centrifugation and dialysis) on the surface chemistry and composition of 15 nm sodium citrate stabilized gold nanoparticles. The nuclear magnetic resonance (NMR) results indicate that three centrifugation cycles are sufficient to remove most of the citrate molecules, while centrifuged liquid sedimentation and dynamic light scattering data reveal some degree of nanoparticle aggregation when three centrifugation cycles are exceeded. Regarding the dialysis procedure, NMR analysis demonstrated that after nine cleaning cycles, the citrate concentration is comparable to that measured after the first centrifugation (about 6 × 10^-4 M) but with an increase in the dispersion polydispersivity index as determined by dynamic light scattering. X-ray photoelectron spectroscopy results support the NMR findings and revealed a major hydrocarbon contamination after the nanoparticles cleaning process. The impact of cleaning on surface functionalization was tested using 1H,1H,2H,2H-perfluorodecanethiol hydrophobic thiols (PFT) to test thiol-citrate substitution. After 24 h exposure, the PFT coverage was less than 0.6 monolayer (ML) for both pristine nanoparticles and particles after three dialysis cycles, but about 0.8 ML after two centrifugation washes.

Structural and Thermodynamic Properties of Nanoparticle-Protein Complexes: A Combined SAXS and SANS Study

We propose a novel method for determining the structural and thermodynamic properties of nanoparticle-protein complexes under physiological conditions. The method consists of collecting a full set of small-angle X-ray and neutron-scattering measurements in solutions with different concentrations of nanoparticles and protein. The nanoparticle-protein dissociation process is described in the framework of the Hill cooperative model, based on which the whole set of X-ray and neutron-scattering data is fitted simultaneously. This method is applied to water solutions of gold nanoparticles in the presence of human serum albumin without any previous manipulation and can be, in principle, extended to all systems. We demonstrate that the protein dissociation constant, the Hill coefficient, and the stoichiometry of the nanoparticle-protein complex are obtained with a high degree of confidence.

Size Determination of a Liposomal Drug by Small-Angle X-ray Scattering Using Continuous Contrast Variation

The continuously growing complexity of nanodrugs urges for complementary characterization techniques which can elude the current limitations. In this paper, the applicability of continuous contrast variation in small-angle X-ray scattering (SAXS) for the accurate size determination of a complex nanocarrier is demonstrated on the example of PEGylated liposomal doxorubicin (Caelyx). The mean size and average electron density of Caelyx was determined by SAXS using a gradient of aqueous iodixanol (Optiprep), an iso-osmolar suspending medium. The study is focused on the isoscattering point position and the analysis of the Guinier region of the scattering curves recorded at different solvent densities. An average diameter of (69 ± 5) nm and electron density of (346.2 ± 1.2) nm(-3) were determined for the liposomal formulation of doxorubicin. The response of the liposomal nanocarrier to increasing solvent osmolality and the structure of the liposome-encapsulated doxorubicin after the osmotic shrinkage of the liposome are evaluated with sucrose contrast variation in SAXS and wide-angle X-ray scattering (WAXS). In the case of using sucrose as contrast agent, a clear osmolality threshold at 670 mOsm kg(-1) was observed, above which the liposomal drug carriers start to shrink, though preserving the intraliposomal doxorubicin structure. The average size obtained by this technique is smaller than the value measured by dynamic light scattering (DLS), though this difference is expected due to the hydrodynamic size of the PEG moieties attached to the liposomal surface, which are not probed with solvent contrast variation in SAXS. The advantages and drawbacks of the proposed technique are discussed in comparison to DLS, the most frequently used sizing method in nanomedicine.