Characterization of the inflammatory response to four commercial bone graft substitutes using a murine biocompatibility model

Histopathological and radiographical evaluation of caprine demineralized bone matrix in a critical ulnar defect in a rabbit model

BACKGROUND

Caprine species satisfy the conditions of an ideal donor animal when compared to bovine species that has been extensively studied and commercialized for bone xenograft. Histopathological and radiological evaluations of caprine demineralized bone matrix (CDBM) were therefore carried out for fracture healing properties for its possible use in bone grafting procedures.

MATERIALS AND METHODS

Twenty-four rabbits were used for this study and were divided randomly into three groups of eight (n = 8) rabbits each. Critical bone defect was created on the ulnar diaphysis under xylazine-ketamine anaesthesia for autogenous bone graft (ABG) group, CDBM group and the last group was left unfilled as negative control (NC). Immediate post-grafting radiograph was taken and repeated on days 14, 28, 42 and 56 to monitor the evidence of radiographic healing. The animals were euthanized on day 56 and defect sites were harvested for histopathology.

RESULTS

There was a progressive evidence of radiographic healing and bone formation in all the groups with significance difference (P = 0.0064). When compared with ABG, NC differ significantly (P < 0.0001) whereas the CDBM did not differ significantly (P = 0.6765). The histopathology sections of ABG and CDBM showed normal bone tissue while the NC section was predominated by fibrous connective tissue. There was therefore an overall significant difference (P = 0.0001) in which CDBM did not differ from ABG (P = 0.2946) while NC did (P = 0.0005).

CONCLUSION

The ABG and CDBM groups showed a similar healing effect in the critical bone defect. Therefore, CDBM could be used as an effective alternative to ABG in orthopaedics to circumvent the limitations and complications associated with it.

LEVEL OF EVIDENCE

Not applicable.

Acceleration of Bone Regeneration Induced by a Soft-Callus Mimetic Material

Clinical implementation of endochondral bone regeneration (EBR) would benefit from the engineering of devitalized cartilaginous constructs of allogeneic origins. Nevertheless, development of effective devitalization strategies that preserves extracellular matrix (ECM) is still challenging. The aim of this study is to investigate EBR induced by devitalized, soft callus-mimetic spheroids. To challenge the translatability of this approach, the constructs are generated using an allogeneic cell source. Neo-bone formation is evaluated in an immunocompetent rat model, subcutaneously and in a critical size femur defect. Living spheroids are used as controls. Also, the effect of spheroid maturation towards hypertrophy is evaluated. The devitalization procedure successfully induces cell death without affecting ECM composition or bioactivity. In vivo, a larger amount of neo-bone formation is observed for the devitalized chondrogenic group both ectopically and orthotopically. In the femur defect, accelerated bone regeneration is observed in the devitalized chondrogenic group, where defect bridging is observed 4 weeks post-implantation. The authors' results show, for the first time, a dramatic increase in the rate of bone formation induced by devitalized soft callus-mimetics. These findings pave the way for the development of a new generation of allogeneic, "off-the-shelf" products for EBR, which are suitable for the treatment of every patient.

Osteogenesis of 3D-Printed PCL/TCP/bdECM Scaffold Using Adipose-Derived Stem Cells Aggregates; An Experimental Study in the Canine Mandible

Three-dimensional (3D) printing is perceived as an innovative tool for change in tissue engineering and regenerative medicine based on research outcomes on the development of artificial organs and tissues. With advances in such technology, research is underway into 3D-printed artificial scaffolds for tissue recovery and regeneration. In this study, we fabricated artificial scaffolds by coating bone demineralized and decellularized extracellular matrix (bdECM) onto existing 3D-printed polycaprolactone/tricalcium phosphate (PCL/TCP) to enhance osteoconductivity and osteoinductivity. After injecting adipose-derived stem cells (ADSCs) in an aggregate form found to be effective in previous studies, we examined the effects of the scaffold on ossification during mandibular reconstruction in beagle dogs. Ten beagles were divided into two groups: group A (PCL/TCP/bdECM + ADSC injection; n = 5) and group B (PCL/TCP/bdECM; n = 5). The results were analyzed four and eight weeks after intervention. Computed tomography (CT) findings showed that group A had more diffuse osteoblast tissue than group B. Evidence of infection or immune rejection was not detected following histological examination. Goldner trichrome (G/T) staining revealed rich ossification in scaffold pores. ColI, Osteocalcin, and Runx2 gene expressions were determined using real-time polymerase chain reaction. Group A showed greater expression of these genes. Through Western blotting, group A showed a greater expression of genes that encode ColI, Osteocalcin, and Runx2 proteins. In conclusion, intervention group A, in which the beagles received the additional ADSC injection together with the 3D-printed PCL/TCP coated with bdECM, showed improved mandibular ossification in and around the pores of the scaffold.

Advancing application of mesenchymal stem cell-based bone tissue regeneration

Reconstruction of bone defects, especially the critical-sized defects, with mechanical integrity to the skeleton is important for a patient's rehabilitation, however, it still remains challenge. Utilizing biomaterials of human origin bone tissue for therapeutic purposes has provided a facilitated approach that closely mimics the critical aspects of natural bone tissue with regard to its properties. However, not only efficacious and safe but also cost-effective and convenient are important for regenerative biomaterials to achieve clinical translation and commercial success. Advances in our understanding of regenerative biomaterials and their roles in new bone formation potentially opened a new frontier in the fast-growing field of regenerative medicine. Taking inspiration from the role and multicomponent construction of native extracellular matrix (ECM) for cell accommodation, the ECM-mimicking biomaterials and the naturally decellularized ECM scaffolds were used to create new tissues for bone restoration. On the other hand, with the going deep in understanding of mesenchymal stem cells (MSCs), they have shown great promise to jumpstart and facilitate bone healing even in diseased microenvironments with pharmacology-based endogenous MSCs rescue/mobilization, systemic/local infusion of MSCs for cytotherapy, biomaterials-based approaches, cell-sheets/-aggregates technology and usage of subcellular vesicles of MSCs to achieve scaffolds-free or cell-free delivery system, all of them have been shown can improve MSCs-mediated regeneration in preclinical studies and several clinical trials. Here, following an overview discussed autogenous/allogenic and ECM-based bone biomaterials for reconstructive surgery and applications of MSCs-mediated bone healing and tissue engineering to further offer principles and effective strategies to optimize MSCs-based bone regeneration.

•

Focusing on MSCs based bone regeneration.

•

Discussed cytotherapy, cell-free therapies and cell-aggregates technology in detail.

•

Stating the approaches of MSCs in diseased microenvironments.

Efficacy of rhBMP-2 Loaded PCL/β-TCP/bdECM Scaffold Fabricated by 3D Printing Technology on Bone Regeneration

This study was undertaken to evaluate the effect of 3D printed polycaprolactone (PCL)/β-tricalcium phosphate (β-TCP) scaffold containing bone demineralized and decellularized extracellular matrix (bdECM) and human recombinant bone morphogenetic protein-2 (rhBMP-2) on bone regeneration. Scaffolds were divided into PCL/β-TCP, PCL/β-TCP/bdECM, and PCL/β-TCP/bdECM/BMP groups. In vitro release kinetics of rhBMP-2 were determined with respect to cell proliferation and osteogenic differentiation. These three reconstructive materials were implanted into 8 mm diameter calvarial bone defect in male Sprague-Dawley rats. Animals were sacrificed four weeks after implantation for micro-CT, histologic, and histomorphometric analyses. The findings obtained were used to calculate new bone volumes (mm³) and new bone areas (%). Excellent cell bioactivity was observed in the PCL/β-TCP/bdECM and PCL/β-TCP/bdECM/BMP groups, and new bone volume and area were significantly higher in the PCL/β-TCP/bdECM/BMP group than in the other groups (p < .05). Within the limitations of this study, bdECM printed PCL/β-TCP scaffolds can reproduce microenvironment for cells and promote adhering and proliferating the cells onto scaffolds. Furthermore, in the rat calvarial defect model, the scaffold which printed rhBMP-2 loaded bdECM stably carries rhBMP-2 and enhances bone regeneration confirming the possibility of bdECM as rhBMP-2 carrier.

In Vivo Assessment of Bone Regeneration in Alginate/Bone ECM Hydrogels with Incorporated Skeletal Stem Cells and Single Growth Factors

The current study has investigated the use of decellularised, demineralised bone extracellular matrix (ECM) hydrogel constructs for in vivo tissue mineralisation and bone formation. Stro-1-enriched human bone marrow stromal cells were incorporated together with select growth factors including VEGF, TGF-β3, BMP-2, PTHrP and VitD3, to augment bone formation, and mixed with alginate for structural support. Growth factors were delivered through fast (non-osteogenic factors) and slow (osteogenic factors) release PLGA microparticles. Constructs of 5 mm length were implanted in vivo for 28 days within mice. Dense tissue assessed by micro-CT correlated with histologically assessed mineralised bone formation in all constructs. Exogenous growth factor addition did not enhance bone formation further compared to alginate/bone ECM (ALG/ECM) hydrogels alone. UV irradiation reduced bone formation through degradation of intrinsic growth factors within the bone ECM component and possibly also ECM cross-linking. BMP-2 and VitD3 rescued osteogenic induction. ALG/ECM hydrogels appeared highly osteoinductive and delivery of angiogenic or chondrogenic growth factors led to altered bone formation. All constructs demonstrated extensive host tissue invasion and vascularisation aiding integration and implant longevity. The proposed hydrogel system functioned without the need for growth factor incorporation or an exogenous inducible cell source. Optimal growth factor concentrations and spatiotemporal release profiles require further assessment, as the bone ECM component may suffer batch variability between donor materials. In summary, ALG/ECM hydrogels provide a versatile biomaterial scaffold for utilisation within regenerative medicine which may be tailored, ultimately, to form the tissue of choice through incorporation of select growth factors.

Hydrogels derived from demineralized and decellularized bone extracellular matrix

The extracellular matrix (ECM) of mammalian tissues has been isolated, decellularized and utilized as a scaffold to facilitate the repair and reconstruction of numerous tissues. Recent studies have suggested that superior function and complex tissue formation occurred when ECM scaffolds were derived from site-specific homologous tissues compared with heterologous tissues. The objectives of the present study were to apply a stringent decellularization process to demineralized bone matrix (DBM), prepared from bovine bone, and to characterize the structure and composition of the resulting ECM materials and DBM itself. Additionally, we sought to produce a soluble form of DBM and ECM which could be induced to form a hydrogel. Current clinical delivery of DBM particles for treatment of bone defects requires incorporation of the particles within a carrier liquid. Differences in osteogenic activity, inflammation and nephrotoxicity have been reported with various carrier liquids. The use of hydrogel forms of DBM or ECM may reduce the need for carrier liquids. DBM and ECM hydrogels exhibited sigmoidal gelation kinetics consistent with a nucleation and growth mechanism, with ECM hydrogels characterized by lower storage moduli than the DBM hydrogels. Enhanced proliferation of mouse primary calvarial cells was achieved on ECM hydrogels, compared with collagen type I and DBM hydrogels. These results show that DBM and ECM hydrogels have distinct structural, mechanical and biological properties and have the potential for clinical delivery without the need for carrier liquids.