Age- and sex-related regional compressive strength characteristics of human lumbar vertebrae in osteoporosis

Investigation of the Role of Osteoporotic Vertebra Degeneration on the Stability of the Lumbar Spine: In Silico Modelling under Compressive Loading

An evaluation of the impact of osteoporosis on loss of spinal stability, with or without intervertebral disc degeneration, using computational analysis is presented. The research also investigates the correlation between osteoporosis and intervertebral disc degeneration. Three-dimensional finite element models of human lumbar spine segments were used to assess the influence of osteoporosis on spinal stability. Five different models of age-related degeneration were created using various material properties for trabecular bone and intervertebral discs. Calculation results indicate that in a spine with osteoporosis, the deformation of the intervertebral discs can increase by more than 30% when compared to a healthy spine. Thus, intervertebral disc deformation depends not only on the degree of degeneration of the discs themselves, but their deformation is also influenced by the degree of osteoporosis of the vertebrae. Additionally, the load-bearing capacity of the spine can decrease by up to 30% with osteoporosis, regardless of the degree of intervertebral disc deformation. In conclusion, osteoporosis can contribute to intervertebral disc degeneration.

The BALB/c mouse as a preclinical model of the age-related deterioration in the lumbar vertebra

The likelihood of experiencing an osteoporotic fracture of one or more vertebral bodies increases with age, and this increase is not solely due to sex steroid deficiency. For the purpose of assessing the effectiveness of novel therapeutic strategies in the prevention of vertebral fractures among the elderly, we hypothesized that the BALB/c mouse model of aging phenocopies the age-related decrease in human VB strength. To test this hypothesis, we assessed the age-related changes in trabecular architecture of the L6 VB, with respect to those in the distal femur metaphysis, between 6-mo. (young adulthood, n = 20/sex) and 20-mo. of age (old age, n = 18/sex) and then determined how well the architectural characteristics, volumetric bone mineral density (vBMD), and predicted failure force from μCT-derived finite element analysis (μFEA) with linear elastic failure criteria explained the age-related variance in VB strength, which was the ultimate force during quasi-static loading of the VB in compression. While there was a pronounced age-related deterioration in trabecular architecture in the distal femur metaphysis of female and male BALB/c mice, the decrease in trabecular bone volume fraction and trabecular number between 6-mo. and 20-mo. of age occurred in male mice, but not in female mice. As such, the VB strength was lower with age in males only. Nonetheless, BV/TV and volumetric bone mineral density (vBMD) positively correlated with the ultimate compressive force of the L6 VB for both females and males. Whether using a fixed homogeneous distribution of tissue modulus (E_t = 18 GPa) or a heterogeneous distribution of E_t based on a positive relationship with TMD, the predicted failure force of the VB was not independent of age, thereby suggesting linear μFEA may not be a suitable replacement for mechanical-based measurements of strength with respect to age-related changes. Overall, the BALB/c mouse model of aging mimics the age-related in decline in human VB strength when comparing 6-mo. and 20-mo. old male mice. The decrease in VB strength in female mice may occur over a different age range.

Standardizing compression testing for measuring the stiffness of human bone

Objectives

The ability to determine human bone stiffness is of clinical relevance in many fields, including bone quality assessment and orthopaedic prosthesis design. Stiffness can be measured using compression testing, an experimental technique commonly used to test bone specimens in vitro. This systematic review aims to determine how best to perform compression testing of human bone.

Methods

A keyword search of all English language articles up until December 2017 of compression testing of bone was undertaken in Medline, Embase, PubMed, and Scopus databases. Studies using bulk tissue, animal tissue, whole bone, or testing techniques other than compression testing were excluded.

Results

A total of 4712 abstracts were retrieved, with 177 papers included in the analysis; 20 studies directly analyzed the compression testing technique to improve the accuracy of testing. Several influencing factors should be considered when testing bone samples in compression. These include the method of data analysis, specimen storage, specimen preparation, testing configuration, and loading protocol.

Conclusion

Compression testing is a widely used technique for measuring the stiffness of bone but there is a great deal of inter-study variation in experimental techniques across the literature. Based on best evidence from the literature, suggestions for bone compression testing are made in this review, although further studies are needed to establish standardized bone testing techniques in order to increase the comparability and reliability of bone stiffness studies.

Cite this article: S. Zhao, M. Arnold, S. Ma, R. L. Abel, J. P. Cobb, U. Hansen, O. Boughton. Standardizing compression testing for measuring the stiffness of human bone. Bone Joint Res 2018;7:524–538. DOI: 10.1302/2046-3758.78.BJR-2018-0025.R1.

Thoracolumbar spine loading associated with kinematics of the young and the elderly during activities of daily living

Excessive mechanical loading of the spine is a critical factor in vertebral fracture initiation. Most vertebral fractures develop spontaneously or due to mild trauma, as physiological loads during activities of daily living might exceed the failure load of osteoporotic vertebra. Spinal loading patterns are affected by vertebral kinematics, which differ between elderly and young individuals. In this study, the effects of age-related changes in spine kinematics on thoracolumbar spinal segmental loading during dynamic activities of daily living were investigated using combined experimental and modeling approach. Forty-four healthy volunteers were recruited into two age groups: young (N = 23, age = 27.1 ± 3.8) and elderly (N = 21, age = 70.1 ± 3.9). The spinal curvature was assessed with a skin-surface device and the kinematics of the spine and lower extremities were recorded during daily living tasks (flexion-extension and stand-sit-stand) with a motion capture system. The obtained data were used as input for a musculoskeletal model with a detailed thoracolumbar spine representation. To isolate the effect of kinematics on predicted loads, other model properties were kept constant. Inverse dynamics simulations were performed in the AnyBody Modeling System to estimate corresponding spinal loads. The maximum compressive loads predicted for the elderly motion patterns were lower than those of the young for L2/L3 and L3/L4 lumbar levels during flexion and for upper thoracic levels during stand-to-sit (T1/T2-T8/T9) and sit-to-stand (T3/T4-T6/T7). However, the maximum loads predicted for the lower thoracic levels (T9/T10-L1/L2), a common site of vertebral fractures, were similar compared to the young. Nevertheless, these loads acting on the vertebrae of reduced bone quality might contribute to a higher fracture risk for the elderly.

The effect of kyphoplasty parameters on the dynamic load transfer within the lumbar spine considering the response of a bio-realistic spine segment

BACKGROUND

With an increasing prevalence of osteoporosis, physicians have to optimize treatment of relevant vertebral compression fractures, which have significant impact on the quality of life in the elder population. Retrospective clinical studies suggest that kyphoplasty, despite being a procedure with promising potential, may be related to an increased fracture risk of the adjacent untreated vertebrae.

METHODS

A bio-realistic model of a lumbar spine is introduced to determine the morbidity of cemented augmentation. The model was verified and validated for the purpose of the study and subjected to a dynamic finite element analysis. Anisotropic bone properties and solid ligamentous tissue were considered along with α time varying loading scenario.

FINDINGS

The yielded results merit high clinical interest. Bi-pedicular filling stimulated a symmetrically developing stress field, thus comparing favourably to uni-pedicular augmentation which resulted in a non-uniform loading of the spine segment. An enslavement of the load transfer was also found to both patient bone mineral density and reinforcement-nucleous pulpous superimposition.

INTERPRETATION

The investigation presented refined insight into the dynamic biomechanical response of a reinforced spine segment. The increase in the calculated occurring stresses was considered as non-critical in most cases, suggesting that prevalent fractures are a symptomatic condition of osteoporosis rather than a sequel of efficiently preformed kyphoplasty.