Odor control during post-digestion processing of biosolids through bioaugmentation of anaerobic digestion

Measuring volatile emissions from biosolids: A critical review on sampling methods

As a by-product of wastewater treatment, biosolids are a source of volatile emissions which can lead to community complaints due to odours and other pollution risks. Sampling methods play a significant role in collecting gas emissions from biosolids-related sources (i.e., pure biosolids, landfilling, land application and composting of biosolids). Though a range of different sampling techniques (flux hood, wind tunnel, static chamber, headspace devices) have been explored in many published papers, the management and best practice for sampling emissions from biosolids is unclear. This paper presents a comprehensive review of sampling methods for collecting gaseous emissions from biosolids. To account for the inconsistent terminologies used to describe sampling devices, a standard nomenclature by grouping sampling devices into five categories was proposed. Literature investigating emission sampling from biosolids-related sources was reviewed. Subsequently a critical analysis of sampling methods in terms of design, advantages, and disadvantages were compiled based on literature findings and assumed mechanistic understanding of operation. Key operational factors such as the presence of fans, purge gas flow rates, insertion depth, and incubation conditions were identified and their level of influence on the measurement of emissions were evaluated. From the review, there are still knowledge gaps regarding sampling methods used to collect gases from biosolids-related sources. Therefore, a framework for the management of emission sampling methodologies based on common sampling purposes was proposed. This critical review is expected to improve the understanding of sampling methodologies used in biosolids-related sources, by demonstrating the potential implications and impacts due to different choices in sampling methods.

The Importance of the Microclimatic Conditions Inside and Outside of Plant Buildings in Odorants Emission at Municipal Waste Biogas Installations

Municipal waste biogas plants are an important element of waste treatment and energy policy. In this study, odorant concentrations and emissions were measured together with the air temperature (T) and relative humidity (RH) to confirm the hypothesis that the microclimatic conditions have an important impact on the level of odorant emission at municipal waste biogas plants. A simple correlation analysis was made to evaluate the strength and the direction of the relationship between the odorant concentration and emission and air temperature and relative humidity. The mean volatile organic compound (VOC) and NH3 concentrations vary depending on the stage of the technological line of the analysed municipal waste biogas plants and are in the following ranges, respectively: 0–38.64 ppm and 0–100 ppm. The odorant concentrations and emissions correlated statistically significantly with T primarily influences VOC concentrations and emissions while RH mainly affects NH3 concentrations and emissions. The strongest correlations were noted for the fermentation preparation section and for emissions from roof ventilators depending on the analysed plant. The smallest influence of microclimatic factors was observed at the beginning of the technological line—in the waste storage section and mechanical treatment hall. This is due to the greater impact of the type and quality of waste delivered the plants. The analysis of correlation between individual odorants showed significant relationships between VOCs and NH3 for most stages of the technological line of both biogas plants. In the case of technological sewage pumping stations, a significant relationship was also observed between VOCs and H2S. The obtained results may be helpful in preparing strategies to reduce the odours from waste treatment plants.

Effect of bioaugmentation on digestate metal concentrations in anaerobic digestion of sewage sludge

This study examined the influence of bioaugmentation on metal concentrations (aluminum, cadmium, chromium, cobalt, copper, iron, lead, manganese, molybdenum, nickel and zinc) in anaerobically digested sewage sludge. To improve the digestion efficiency, bioaugmentation with a mixture of wild-living Archaea and Bacteria (MAB) from Yellowstone National Park, USA, was used. The total concentration of all metals was higher in the digestate than in the feedstock. During anaerobic digestion, the percent increase in the concentration of most of metals was slightly higher in the bioaugmented runs than in the un-augmented runs, but these differences were not statistically significant. However, the percent increase in cadmium and cobalt concentration was significantly higher in the bioaugmented runs than in the un-augmented runs. At MAB doses of 9 and 13% v/v, cadmium concentration in the digestate was 211 and 308% higher than in the feedstock, respectively, and cobalt concentration was 138 and 165%, respectively. Bioaugmentation increased over 4 times the percentage of Pseudomonas sp. in the biomass that are able to efficiently accumulate metals by both extracellular adsorption and intracellular uptake. Biogas production was not affected by the increased metal concentrations. In conclusion, bioaugmentation increased the concentration of metals in dry sludge, which means that it could potentially have negative effects on the environment.

Bioaugmentation of syntrophic acetate-oxidizing culture in biogas reactors exposed to increasing levels of ammonia

The importance of syntrophic acetate oxidation for process stability in methanogenic systems operating at high ammonia concentrations has previously been emphasized. In this study we investigated bioaugmentation of syntrophic acetate-oxidizing (SAO) cultures as a possible method for decreasing the adaptation period of biogas reactors operating at gradually increased ammonia concentrations (1.5 to 11 g NH(4)(+)-N/liter). Whole stillage and cattle manure were codigested semicontinuously for about 460 days in four mesophilic anaerobic laboratory-scale reactors, and a fixed volume of SAO culture was added daily to two of the reactors. Reactor performance was evaluated in terms of biogas productivity, methane content, pH, alkalinity, and volatile fatty acid (VFA) content. The decomposition pathway of acetate was analyzed by isotopic tracer experiments, and population dynamics were monitored by quantitative PCR analyses. A shift in dominance from aceticlastic methanogenesis to SAO occurred simultaneously in all reactors, indicating no influence by bioaugmentation on the prevailing pathway. Higher abundances of Clostridium ultunense and Tepidanaerobacter acetatoxydans were associated with bioaugmentation, but no influence on Syntrophaceticus schinkii or the methanogenic population was distinguished. Overloading or accumulation of VFA did not cause notable dynamic effects on the population. Instead, the ammonia concentration had a substantial impact on the abundance level of the microorganisms surveyed. The addition of SAO culture did not affect process performance or stability against ammonia inhibition, and all four reactors deteriorated at high ammonia concentrations. Consequently, these findings further demonstrate the strong influence of ammonia on the methane-producing consortia and on the representative methanization pathway in mesophilic biogas reactors.

Bioaugmentation for improved recovery of anaerobic digesters after toxicant exposure

Bioaugmentation was investigated as a method to decrease the recovery period of anaerobic digesters exposed to a transient toxic event. Two sets of laboratory-scale digesters (SRT = 10 days, OLR = 2 g COD/L-day), started with inoculum from a digester stabilizing synthetic municipal wastewater solids (MW) and synthetic industrial wastewater (WW), respectively, were transiently exposed to the model toxicant, oxygen. Bioaugmented digesters received 1.2 g VSS/L-day of an H2-utilizing culture for which the archaeal community was analyzed. Soon after oxygen exposure, the bioaugmented digesters produced 25-60% more methane than non-bioaugmented controls (p < 0.05). One set of digesters produced lingering high propionate concentrations, and bioaugmentation resulted in significantly shorter recovery periods. The second set of digesters did not display lingering propionate, and bioaugmented digesters recovered at the same time as non-bioaugmented controls. The difference in the effect of bioaugmentation on recovery may be due to differences between microbial communities of the digester inocula originally employed. In conclusion, bioaugmentation with an H(2)-utilizing culture is a potential tool to decrease the recovery period, decrease propionate concentration, and increase biogas production of some anaerobic digesters after a toxic event. Digesters already containing rapidly adaptable microbial communities may not benefit from bioaugmentation, whereas other digesters with poorly adaptable microbial communities may benefit greatly.