Photocatalytic degradation of p-nitrophenol by zinc oxide particles

Visible Light Motivated the Photocatalytic Degradation of P-Nitrophenol by Ca2+-Doped AgInS2

4-Nitrophenol (4-NP) is considered a priority organic pollutant with high toxicity. Many authors have been committed to developing efficient, green, and environmentally friendly technological processes to treat wastewater containing 4-NP. Here, we investigated how the addition of Ca2+ affects the catalytic degradation of 4-NP with AgInS2 when exposed to light. We synthesized AgInS2 (AIS) and Ca2+-doped AgInS2 (Ca-AIS) with varying amounts of Ca2+ using a low-temperature liquid phase method. The SEM, XRD, XPS, HRTEM, BET, PL, and UV-Vis DRS characteristics were employed to analyze the structure, morphology, and optical properties of the materials. The effects of different amounts of Ca2+ on the photocatalytic degradation of 4-NP were investigated. Under visible light illumination for a duration of 120 min, a degradation rate of 63.2% for 4-Nitrophenol (4-NP) was achieved. The results showed that doping with an appropriate amount of Ca2+ could improve the visible light catalytic activity of AIS. This work provides an idea for finding suitable cheap alkaline earth metal doping agents to replace precious metals for the improvement of photocatalytic activities.

Serratula coronata L. Mediated Synthesis of ZnO Nanoparticles and Their Application for the Removal of Alizarin Yellow R by Photocatalytic Degradation and Adsorption

In this study, the potential of biogenic zinc oxide nanoparticles (ZnO NPs) in the removal of alizarin yellow R (AY) from aqueous solutions by photocatalytic degradation, as well as adsorption, was investigated. The synthesized ZnO NPs were prepared by the simple wet-combustion method using the plant extract of Serratula coronata L. as a reducing and stabilizing agent and characterized by powder X-ray diffraction, scanning electron microscopy, energy dispersive X-ray and X-ray photoelectron spectroscopy. Photocatalytic degradation of AY was monitored by UV-visible spectroscopy and the effects of parameters, such as light source type (UV-, visible- and sunlight), incubation time, pH, catalyst dosage and temperature on degradation were investigated. It was demonstrated that the source of light plays an important role in the efficiency of the reaction and the UV-assisted degradation of AY was the most effective, compared to the others. The degradation reaction of AY was found to follow the Langmuir-Hinshelwood mechanism and a pseudo-first-order kinetic model. The degradation kinetics of AY accelerated with increasing temperature, and the lowest activation energy (E_a) was calculated as 3.4 kJ/mol for the UV-light irradiation system, while the E_a values were 4.18 and 7.37 kJ/mol for visible light and sunlight, respectively. The dye removal by the adsorption process was also affected by several parameters, such as pH, sorbent amount and contact time. The data obtained in the kinetics study fit the pseudo-second-order equation best model and the rate constant was calculated as 0.001 g/mg·min. The isotherm analysis indicated that the equilibrium data fit well with the Freundlich isotherm model. The maximum adsorption capacity of AY on biogenic ZnO NPs was 5.34 mg/g.

Photocatalytic degradation of p-nitrophenol using biologically synthesized ZnO nanoparticles

The present work deals with the photocatalytic degradation of p-nitrophenol as it is a United States Environmental Protection Agency-listed priority pollutant and has adverse environmental and health effects. To eradicate the detrimental environmental impact of p-nitrophenol, the biologically synthesized ZnO nanoparticles were used as a photocatalyst. The degradation of p-nitrophenol was confirmed by decreasing the absorbance value at a characteristic wavelength of 317 nm using the UV-vis spectrophotometer. Reaction parameters such as ZnO photocatalyst concentration of 0.1 g/L at pH 11 in the presence of H₂O₂ (5 mM) were found to be optimum conditions for p-nitrophenol degradation. The photocatalytic degradation was slowly enhanced in the presence of H₂O₂ as an electron acceptor. The kinetics of nitrophenol degradation was studied, which follows the pseudo-first-order reaction. The photocatalytic degradation of p-nitrophenol was characterized by using total organic carbon, chemical oxygen demand, and high-performance liquid chromatography analyses. This method is found to be effective as it is environmentally friendly, free of toxic chemicals.

Mechanisms for removal of p-nitrophenol from aqueous solution using zero-valent iron

Batch experiments were conducted to examine mechanisms for removal of p-nitrophenol (PNP) from aqueous solution using zero-valent iron (ZVI). Removal of PNP using ZVI was mainly attributed to three mechanisms: degradation, precipitation and adsorption. A complete removal of 30 mg L(-1) PNP with ZVI dosage of 1000 mg L(-1) achieved within 30 min at pH 3. The PNP removal rate in the acidic solutions was significantly suppressed at higher pH. The modified Langmuir-Hinshelwood kinetic model could successfully describe the PNP removal process using ZVI at different pH conditions. Total organic carbon (TOC) removal efficiencies were found to be almost independent of pH. While the TOC removal at lower pH was profoundly affected by the reductive and/or oxidative degradation, the adsorption was favorable at higher pH. The effect of dissolved oxygen on PNP removal was investigated at pH 3 where a maximum contribution of oxidative degradation could be expected. The PNP removal in the anoxic system purged with nitrogen gas was quick as well as that in the system being open to the air. However, the TOC removal under the anoxic condition was negligible as compared with that in the oxic system. The profiles of the intermediates formed during the PNP degradation indicated that the reductive degradation was predominant in the initial phase of the removal and subsequently the oxidative degradation occurred.

Enhanced photocatalytic activity of V₂O₅-ZnO composites for the mineralization of nitrophenols

In an effort to enhance the photocatalytic activity of ZnO in natural sunlight, V2O5-ZnO nanocomposites were synthesized by co-precipitation technique. The characterization of the synthesized powders by FESEM, XRD and UV-visible diffuse reflectance spectroscopy (DRS) revealed that the both V2O5 and ZnO retain their individual identity in the composites but the increasing concentration of V2O5 affect the particle size of ZnO. As estimated by photoluminescence spectroscopy, in comparison to pure ZnO, the presence of V2O5 significantly suppressed the charge carrier's recombination process. The photocatalytic activity of the synthesized powders was evaluated for the degradation/mineralization of three potential nitrophenol pollutants (2-nitrophenol, 4-nitrophenol, and 2,4-dinitrophenol). The synthesized composites showed significantly higher activity for both degradation and mineralization of nitrophenols compared to pure ZnO. The progress of the degradation process was evaluated by HPLC while mineralization was monitored by TOC analysis. The degradation/mineralization route was estimated by identifying the intermediates using GC-MS. The correlation of the experimental data revealed that the position of NO2 group in 2- and 4-nitrophenol significantly affect the rate of degradation. The identification of hydroxyl group containing intermediates in the degradation of 4-NP confirmed the formation and vital role of hydroxyl radicals in degradation process. The rapid mineralization of nitrophenol substrates pointed out superoxide anions as major contributors in degradation and mineralization process. The assessment of the release of relevant ions (NO2(-), NO3(-), ONOO(-) and NH4(+)) during the degradation process assisted in identifying the plausible interaction sites.

Decolorization of dark brown colored coffee effluent using zinc oxide particles: the role of dissolved oxygen in degradation of colored compounds

The degradation of model dark brown colored coffee effluent using photocatalyst zinc oxide (ZnO) has been systematically studied by varying ZnO dosage from 0 to 4000 mg L(-1), coffee loading from 0 to 90 mg L(-1) and intensity of UV light having the radiation peak at 352 nm from 0 to 18 W(m-lamp length)(-1). Almost complete decolorization was achieved after 180 min for the initial coffee concentration of 50 mg L(-1) with ZnO dosage of 3000 mg L(-1) and three UV lamps. The dissolved oxygen (DO) largely affected the photodecolorization process. Without air sparging or with oxygen supply only through the free-surface, the DO concentration significantly decreased during the initial decolorization process and then increased to the saturated DO concentration after about 80% decolorization was achieved. Under the anoxic condition with nitrogen gas sparging, the efficient color removal was not obtained unlike the decolorization without air sparging or under the oxic condition with air sparging. These findings suggest that the change in DO concentration was controlled by the oxygen consumption for the formation of oxygen adduct intermediates such as organoperoxy radicals. The mineralization rate of model coffee effluent was rather slow as compared with the decolorization rate and it was insignificantly affected by anoxic and oxic conditions. The present results indicate that ZnO photocatalyst has potential for treatment of coffee processing wastewaters.

Solar photo-Fenton process for the treatment of colored soft drink wastewater: decolorization, mineralization and COD removal of oolong tea effluent

The decolorization and mineralization of dark-brown-colored oolong tea effluent by the solar photo-Fenton process has been examined. The solar photo-Fenton process for a fine day achieved 92% decolorization after 60 min and 94% mineralization after 80 min. For a cloudy day, about 88% decolorization and 85% mineralization were obtained after 290 min. For reference the UV light photo-Fenton process was also conducted. Very similar degradation efficiencies were found between the solar and UV light photo-Fenton processes. However, the intrinsic low cost associated with abundant solar energy turned out to be more efficient in treating oolong tea effluent as compared with UV light. The decolorization and mineralization profiles under the different light intensities could be unified with the accumulated light energy instead of with irradiation time. This implies that the solar photo-Fenton process should be designed and operated on the basis of the accumulated energy rather than the reaction time. The COD removal was 99.3% after 75 min under the fine condition. This removal rate for a fine day was approximately twice as fast than that for a cloudy day and comparable to that by the UV light irradiation. The results obtained in this study suggest that the solar photo-Fenton process offers a promising technology for decolorization and degradation of oolong tea effluent.