Fecal sludge as a fuel: characterization, cofire limits, and evaluation of quality improvement measures

Source separation of human excreta: Effect on resource recovery via pyrolysis

More people globally are now using on-site sanitation technologies than sewered connections. The management of faecal sludge generated by on-site facilities is still challenging and requires an understanding of all sanitation service chain components and their interactions; from source conditions to treatment and resource recovery. This study aimed to improve the current lack of knowledge regarding these interactions, by establishing a quantifiable relationship between human excreta source separation and resource recovery via pyrolysis. The effects of source separation of faeces and urine on biochar quality were investigated for different pyrolysis temperatures (450 °C, 550 °C, 650 °C) and this information was used to assess energy and nutrient recovery. Results quantify the benefits of urine diversion for nitrogen recovery (70% of total N losses during thermal treatment avoided) and show an increase in the liming potential of the produced faecal-based biochars. The quality of produced solid fuels is also improved when source-separated faeces (SSF) are used as a feedstock for pyrolysis, including a 50% increase in char calorific value. On the other hand, biochars from mixed urine and faeces (MUF) are more rich in phosphorus and potassium, and surface morphology investigation indicates higher porosity compared to SSF biochars. The high salinity of MUF biochars should be considered before agricultural applications. For both biochar types (SSF, MUF), the presence of phosphate compounds of high fertiliser value was confirmed by X-ray diffraction analysis, and temperatures around 500 °C are recommended to optimise nutrient and carbon behaviour when pyrolysing human excreta. These findings can be used for the design of circular faecal sludge management systems, linking resource recovery objectives to source conditions, and vice-versa. Ultimately, achieving consistent resource recovery from human excreta can act as an incentive for universal access to safe and sustainable sanitation.

Heating and emission characteristics from combustion of charcoal and co-combustion of charcoal with faecal char-sawdust char briquettes in a ceramic cook stove

Over reliance on charcoal has accelerated deforestation in sub-Saharan Africa. Seeking alternative sustainable and environmentally friendly sources of biomass energy to meet the escalating energy demand is therefore vital. However, limited evidence exists on the concentrations of toxic emissions of different biomass fuels. Herein, dried human faeces and sawdust were pyrolyzed at 350 °C to produce biochar and mixed in equal ratio to produce briquettes through densification, with molasses (10 wt.%) used as a binder. A comparative study on the heating properties and emission level of carbon monoxide (CO), nitric oxide (NO), and hydrogen sulphide (H₂S) during combustion of charcoal, and co-combustion (50:50 wt. %) of charcoal with briquettes was conducted. The thermal profile of the flue gases indicated rapid combustion of volatile gases followed by slow oxidation of the char. Co-combustion significantly (P < 0.05) enhanced the amount of heat energy released with flue gases temperatures reaching a peak of 475 °C. The briquettes had a gross calorific value of 19.8 MJ/kg which was lower than 25.7 MJ/kg for charcoal. Combustion of charcoal did not emit NO, however the concentration of CO was above the critical short term limits of 35 ppm. The concentration of CO and H₂S was above the short term exposure limits of 35 ppm, and 0.005 ppm, respectively, during co-combustion, whereas NO concentration was below dangerous exposure levels of 100 ppm. These results suggest that co-combustion of charcoal with the briquettes is a promising approach to generate safe and sufficient heat energy for cooking and reduce deforestation.

Biofuel characteristics of non-charred briquettes from dried fecal sludge blended with food market waste: Suggesting a waste-to-biofuel enterprise as a win-win strategy to solve energy and sanitation problems in slums settlements

This study explored the production and evaluation of briquettes made from dried fecal sludge mixed with fresh food waste as a dual strategy to solve energy poverty and poor sanitation problems in Ugandan slums. Cylindrical briquettes measuring 82 mm height by 76 mm diameter were produced from dried fecal sludge (FS) alone, and FS mixed separately with pineapple peels (FS + PP), charcoal fines (FS + CD), and bean husks (FS + BH) in a mix ratio of 50% FS: 50% biomass (wt/wt basis) using red soil as the binder. Physiochemical characteristics and fuel thermal efficiency of the briquettes were tested following ASTM standards and were compared to wood-derived charcoal and commonly traded briquettes on market in Uganda. The average moisture content was 5.1%. Bulk density was highest in FS briquettes (1.12 g/cm³) and lowest in FS + BH (0.847 g/cm³). Volatile matter (VM) was highest in FS + PP (39%) and lowest in FS alone (25.7%). The average ash content was 30.4%. FS + PP had the highest calorific value (17.92 MJ/kg) while FS alone had the lowest (6.19 MJ/kg). The highest burning rate was recorded in FS + CD briquettes (8 g/min) and was lowest in FS + PP (4 g/min). Based on the calculated burning rates and calorific values, the economic advantage calculations implied that blending one ton of dry FS with one ton of dry pineapple peels for fuel briquettes, and their use as a substitute could save consumers about USD 620 per ton of wood charcoal foregone.

Critical analytical parameters for faecal sludge characterisation informing the application of thermal treatment processes

Thermal processes for the treatment of faecal sludge such as pyrolysis or combustion offer complete destruction of pathogens, whilst allowing for energy and nutrient recovery. The development of such processes is currently constrained by a lack of knowledge on thermally relevant faecal sludge characteristics. This study investigated thirty faecal sludge samples from three sanitation technologies (ventilated improved pit latrines (VIP), urine diverting dry toilets (UD), septic tanks (ST)) and compared these by non-parametric statistical analysis. A focus was placed on parameters necessary for thermal process development and recoverable nutrient concentrations. The relevant characteristics ranged widely within technology groups. Calorific values and ash concentrations of 2.1-25.7 MJ/kg and 9.5-88.4% were observed for STs, of 9.2-13.9 MJ/kg and 40.9-61.5% for VIPs and of 3.9-18.1 MJ/kg and 18.8-81.3% for UDs. These two parameters show a strong linear inverse correlation and determine the minimum dewatering requirements from which a net energy recovery may be possible. Results suggest that more than 90% of samples can meet these requirements following commonly used dewatering technologies. A comparison across technologies provided strong evidence that the faecal sludge source significantly influences sludge composition, emphasized by higher median ratios of fixed carbon to volatile matter in VIPs (0.23) and UDs (0.23) compared to STs (0.15). The sanitation technology also influenced recoverable nutrient concentrations, with phosphorus and potassium concentrations generally ranging between 5.8-49.2 g/kg and 1.4-26.1 g/kg respectively. Compared to STs, median concentrations of phosphorus and potassium in VIPs were 3.4 and 3.8 times higher respectively, and 3.0 and 8.8 times higher in UDs. The findings highlight the importance of considering the faecal sludge source in the development of thermal treatment processes. This study provides critical knowledge to further develop such processes through modelling, experimental and scaled approaches.

Garbage in garbage out: the contribution of our industrial advancement to wastewater degeneration

Natural water sources are habitually marred by insidious anthropogenic practices and municipal wastewater discharges that contain either of xenobiotic pollutants and their sometimes more toxic degradation products, or both. Although wastewater is considered as both a resource and a problem, as explained in this review, it is however daunting that, while the global village is still struggling to decipher the mode of proper handling, subsequent discharge and regulation of already established aromatic contaminants in wastewater, there emanates some more aggressive, stealth and sinister groups of compounds. It is quite ironic that majority of these compounds are the 'go through' consumables in our present society and have been suspected to pose several health risks to the aquatic ecosystem, eliciting unfavourable clinical manifestations in aquatic animals and humans, which has heightened the uncertainties conferred on freshwater use and consumption of some aquatic foods. This review therefore serves to give a brief account on the metamorphosis of approach in detection of aromatic pollutants and ultimately their implications along the trophic chains in the community.