Assessment of the adsorption kinetics, equilibrium and thermodynamic for Pb(II) removal using a hybrid adsorbent, eggshell and sericite, in aqueous solution

Influence of duck eggshell powder modifications by the calcination process or addition of iron (III) oxide-hydroxide on lead removal efficiency

Lead-contaminated wastewater causes toxicity to aquatic life and water quality for water consumption, so it is required to treat wastewater to be below the water quality standard before releasing it into the environment. Duck eggshell powder (DP), duck eggshell powder mixed iron (III) oxide-hydroxide (DPF), calcinated duck eggshell powder (CDP), and calcinated duck eggshell powder mixed iron (III) oxide-hydroxide (CDPF) were synthesized, characterized, and investigated lead removal efficiencies by batch experiments, adsorption isotherms, kinetics, and desorption experiments. CDPF demonstrated the highest specific surface area and pore volume with the smallest pore size than other materials, and they were classified as mesoporous materials. DP and DPF demonstrated semi-crystalline structures with specific calcium carbonate peaks, whereas CDP and CDPF illustrated semi-crystalline structures with specific calcium oxide peaks. In addition, the specific iron (III) oxide-hydroxide peaks were detected in only DPF and CDPF. Their surface structures were rough with irregular shapes. All materials found carbon, oxygen, and calcium, whereas iron, sodium, and chloride were only found in DPF and CDPF. All materials were detected O-H, C=O, and C-O, and DPF and CDPF were also found Fe-O from adding iron (III) oxide-hydroxide. The point of zero charges of DP, DPF, CDP, and CDPF were 4.58, 5.31, 5.96, and 6.75. They could adsorb lead by more than 98%, and CDPF illustrated the highest lead removal efficiency. DP and CDP corresponded to the Langmuir model while DPF and CDPF corresponded to the Freundlich model. All materials corresponded to a pseudo-second-order kinetic model. Moreover, they could be reusable for more than 5 cycles for lead adsorption of more than 73%. Therefore, CDPF was a potential material to apply for lead removal in industrial applications.

Efficacy study of recycling materials by lemon peels as novel lead adsorbents with comparing of material form effects and possibility of continuous flow experiment

Lead contamination in the industrial wastewater is a major concern because of human health effects, so wastewater treatment is required before uses. Adsorption is an effective method with a reasonable cost, and natural wastes are an interesting choice as low-cost adsorbent. Lemon peels were chosen with their proper chemical properties for lead removal. This study is aimed at synthesizing lemon peel adsorbents; analyzing adsorbent characterizations; investigating affecting factors on dose, contact time, pH, and concentration; examining adsorption isotherms and kinetics; and exploring desorption experiments and fixed-bed column experiments. This study was successful synthesized adsorbents of lemon peel powder (LP) and beads (LPB) and was characterized through XRD, FESEM-FIB, EDS, BET, and FTIR. The optimum conditions of LP and LPB of 50 mg L^-1 lead concentration were 4 g, 6 h, and pH 5 and 3 g, 5 h, and pH 5, respectively. Both adsorbents were corresponded to Freundlich and pseudo-second-order kinetic model. Fixed-bed column experiments which represented LPB had high lead removal efficiency with the adsorption capacity of 1.67 mg g^-1, and it was also a good reusability more than 2 cycles. Therefore, LPB is a potential adsorbent to possibly apply for wastewater treatment.

Optimization of hydrothermal synthesis of hydroxyapatite from chicken eggshell waste for effective adsorption of aqueous Pb(II)

Proper disposal of the millions of tons of eggshell waste generated around the world every year is a significant environmental challenge. However, eggshell waste can be converted into new materials that may be useful for a wide range of applications. In this study, four methods, including the conventional subcritical hydrothermal method (CSHM), microwave-assisted subcritical hydrothermal method (MSHM), conventional low-temperature hydrothermal method (CLHM), and ultrasonic-assisted low-temperature hydrothermal method (ULHM) were used to convert eggshell waste into hydroxyapatite (HAP). For each hydrothermal method, increasing the reaction temperature increased production efficiency and improved the degree of crystallinity of HAP. X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area analysis, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were used to characterize the preferred eggshell-derived HAP, which was produced by the MSHM at 180 °C in a period of only 1 h. For the MSHM, the HAP yield was 75.3%, the degree of HAP crystallinity was as high as 0.78, and pure, rod-like, nano-sized HAP particles with high specific surface area were produced. For the preferred HAP produced by the MSHM, the adsorption capacity of Pb²⁺and pH were positively related in the range of pH 1-6. Consequently, the HAP produced by the MSHM showed relatively high maximum adsorption (q_m= 505.05 mg/g) of Pb²⁺ in aqueous solution. The adsorption process followed a pseudo-second-order reaction model, and the equilibrium adsorption was well fit by the Langmuir model.

Enhanced heavy metal removal from an aqueous environment using an eco-friendly and sustainable adsorbent

Thiol-lignocellulose sodium bentonite (TLSB) nanocomposites can effectively remove heavy metals from aqueous solutions. TLSB was formed by using -SH group-modified lignocellulose as a raw material, which was intercalated into the interlayers of hierarchical sodium bentonite. Characterization of TLSB was then performed with BET, FTIR, XRD, TGA, PZC, SEM, and TEM analyses. The results indicated that thiol-lignocellulose molecules may have different influences on the physicochemical properties of sodium bentonite, and an intercalated-exfoliated structure was successfully formed. The TLSB nanocomposite was subsequently investigated to validate its adsorption and desorption capacities for the zinc subgroup ions Zn(II), Cd(II) and Hg(II). The optimum adsorption parameters were determined based on the TLSB nanocomposite dosage, concentration of zinc subgroup ions, solution pH, adsorption temperature and adsorption time. The results revealed that the maximum adsorption capacity onto TLSB was 357.29 mg/g for Zn(II), 458.32 mg/g for Cd(II) and 208.12 mg/g for Hg(II). The adsorption kinetics were explained by the pseudo-second-order model, and the adsorption isotherm conformed to the Langmuir model, implying that the dominant chemical adsorption mechanism on TLSB is monolayer coverage. Thermodynamic studies suggested that the adsorption is spontaneous and endothermic. Desorption and regeneration experiments revealed that TLSB could be desorbed with HCl to recover Zn(II) and Cd(II) and with HNO3 to recover Hg(II) after several consecutive adsorption/desorption cycles. The adsorption mechanism was investigated through FTIR, EDX and SEM, which demonstrated that the introduction of thiol groups improved the adsorption capacity. All of these results suggested that TLSB is an eco-friendly and sustainable adsorbent for the extraction of Zn(II), Cd(II) and Hg(II) ions in aqueous media.