Adsorption of pharmaceutical residues on adsorbents prepared from olive stones using mixture design of experiments model

Biochar-mediated removal of pharmaceutical compounds from aqueous matrices via adsorption

Pharmaceutical is one of the noteworthy classes of emerging contaminants. These biologically active compounds pose a range of deleterious impacts on human health and the environment. This is attributed to their refractory behavior, poor biodegradability, and pseudopersistent nature. Their large-scale production by pharmaceutical industries and subsequent widespread utilization in hospitals, community health centers, and veterinary facilities, among others, have significantly increased the occurrence of pharmaceutical residues in various environmental compartments. Several technologies are currently being evaluated to eliminate pharmaceutical compounds (PCs) from aqueous environments. Among them, adsorption appears as the most viable treatment option because of its operational simplicity and low cost. Intensive research and development efforts are, therefore, currently underway to develop inexpensive adsorbents for the effective abatement of PCs. Although numerous adsorbents have been investigated for the removal of PCs in recent years, biochar-based adsorbents have garnered tremendous scientific attention to eliminate PCs from aqueous matrices because of their decent specific surface area, tunable surface chemistry, scalable production, and environmentally benign nature. This review, therefore, attempts to provide an overview of the latest progress in the application of biochar for the removal of PCs from wastewater. Additionally, the fundamental knowledge gaps in the domain knowledge are identified and novel strategic research guidelines are laid out to make further advances in this promising approach towards sustainable development.

Heterogeneous degradation of amoxicillin in the presence of synthesized alginate-Fe beads catalyst by the electro-Fenton process using a graphite cathode recovered from used batteries

Iron alginate beads (Fe-Alg) were prepared, characterized and implemented for the degradation of amoxicillin (AMX) by the heterogeneous electro-Fenton process using a graphite cathode recovered from used batteries. Scanning electron microscopy (SEM) showed that (Fe-Alg) beads have a spherical shape and the results of energy dispersive spectrometric (EDS) revealed the presence of iron in (Fe-Alg). Optimization of the operating parameters showed that a complete degradation of AMX was achieved within 90 min of heterogeneous electro-Fenton treatment by operating under these conditions: initial AMX concentration: 0.0136 mM, I = 600 mA, [Na₂SO₄] = 50 mM, pH = 3, T = 25 °C, ω = 360 rpm. The corresponding chemical oxygen demand (COD) abatement was 50%. Increasing the contact time increased the COD abatement to 85.71%, after 150 min of heterogeneous electro-Fenton treatment. The results of the kinetic study by using nonlinear methods demonstrated that the reaction of AMX degradation obeyed to a pseudo-second-order kinetic. Iron content of 4.63% w/w was determined by the acid digestion method. After 5 cycles of use, the Alg-Fe catalyst depletion was only 8%. Biodegradability was remarkably improved after electro-Fenton pretreatment, since it increased from 0.07 initially to 0.36. The heterogeneous electro-Fenton process had efficiently eliminated AMX and it increased the biodegradability of the treated solution.

Development and Characterization of Activated Carbon from Olive Pomace: Experimental Design, Kinetic and Equilibrium Studies in Nimesulide Adsorption

The lack of adequate treatment for the removal of pollutants from domestic, hospital and industrial effluents has caused great environmental concern. Therefore, there is a need to develop materials that have the capacity to treat these effluents. This work aims to develop and characterize an activated charcoal from olive pomace, which is an agro-industrial residue, for adsorption of Nimesulide in liquid effluent and to evaluate the adsorption kinetics and equilibrium using experimental design. The raw material was oven dried at 105 °C for 24 h, ground, chemically activated in a ratio of 1:0.8:0.2 of olive pomace, zinc chloride and calcium hydroxide and thermally activated by pyrolysis in a reactor of stainless steel at 550 °C for 30 min. The activated carbon was characterized by Fourier Transform Infrared (FTIR) spectroscopy, X-ray Diffractometry (XRD), Brunauer, Emmett and Teller (BET) method, Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), density and zero charge potential analysis. The surface area obtained was 650.9 m² g⁻¹. The kinetic and isothermal mathematical models that best described the adsorption were PSO and Freundlich and the highest adsorption capacity obtained was 353.27 mg g⁻¹. The results obtained showed the good performance of activated carbon produced from olive pomace as an adsorbent material and demonstrated great potential for removing emerging contaminants such as Nimesulide.

Cotton textile waste valorization for removal of tetracycline and paracetamol alone and in mixtures from aqueous solutions: Effects of H3 PO4 as an oxidizing agent

The use of waste and by-products locally available in large quantities and at low cost as adsorbents can be considered an appropriate approach for improving waste management and protecting the environment. Cotton textile waste was used to prepare adsorbents (MC) via pyrolysis followed by a chemical modification with H₃ PO₄ . MC samples were characterized by scanning electron microscopy, FTIR spectroscopy, and N₂ adsorption-desorption isotherm. The results revealed that MC treated with 1 M H₃ PO₄ (MC₁ ) showed an excellent adsorption performance. The single and binary adsorption of tetracycline (TC) and paracetamol (Pa) onto MC₁ were studied. In a single system, TC was better adsorbed than Pa and maximum adsorption capacities q_m are 87.7 mg/g and 62 mg/g, respectively. The adsorption follows the Langmuir and pseudo-second-order kinetic models. For a binary system, the experimental data indicate that Pa (44.04 mg/g) is better adsorbed than TC (24.13 mg/g). Adsorption equilibrium data of TC and Pa evaluated by the selectivity extended-Langmuir model in which selectivity factor was introduced provided good correlation results with the binary adsorption data. Cotton textile waste is potentially promising for the preparation of effective adsorbents for the removal of pharmaceutical residues in aqueous solutions. PRACTITIONER POINTS: Valorization of cotton textile waste into adsorbents. Adsorbents were prepared by pyrolysis at 600°C followed by chemical modification in the presence of H₃ PO₄ . Removal of tetracycline (TC) and paracetamol (Pa) alone or in mixtures by adsorption. Adsorbent showed high-capacity adsorption of the TC and Pa even in a mixture from solutions at low concentrations. The Langmuir and selectivity extended-Langmuir models describe the adsorption of TC and Pa alone and in mixtures, respectively.

Tetracycline hydrochloride degradation by heterogeneous photocatalysis using TiO2(P25) immobilized in biopolymer (chitosan) under UV irradiation

TiO₂(P25) has been widely used to treat wastewater; however, the elimination of TiO₂(P25) suspended in the treated water causes running costs and induces secondary pollution, which greatly restricts its practical applications. Consequently, several methods have been implemented to immobilize TiO₂(P25) on various substrates. This work deals with the immobilization of TiO₂(P25) in chitosan film by using the cross-linking method. The prepared catalyst was characterized using X-ray diffraction (XRD), Fourier transform infrared spectrometry (FTIR), UV-Vis diffuse reflectance spectra (DRS) and scanning electron microscopy (SEM), and its catalytic activity in tetracycline hydrochloride (TC) degradation under UV light was explored. XRD, FTIR, DRS and SEM characterization indicated that TiO₂(P25) was successfully immobilized on chitosan film, the chemical structure of TiO₂(P25) did not change after the immobilization and the TiO₂(P25) was uniformly dispersed in the composite. Chitosan/TiO₂(P25) was used for the removal of TC by photocatalysis under UV irradiation. The effects of operational parameters such as amount of TiO₂(P25), agitation speed and the initial TC concentration were investigated. An 87% removal efficiency of TC was obtained with 0.12 g of TiO₂(P25) and TC removal was significantly enhanced by the agitation of the solution. The TC removal efficiency decreased from 72 to 44% when TC concentration increased from 30 to 40 mg/L after 60 min reaction time, the photocatalytic reactions followed the pseudo-second-order kinetic.