Characterization of performance of full-scale tertiary membranes under stressed operating conditions

Interaction of operating HRT and temperature on fouling of tertiary membranes treating municipal wastewater

This paper presents the first study to quantify and demonstrate the interactions between SBR operating conditions (hydraulic retention time (HRT) and temperature) and soluble microbial product (SMP) generation, as well as the impact of SBR operating conditions and filtration temperature on fouling of membranes used in tertiary treatment. Reducing SBR operating HRT from 20 to 10 h resulted in an increase in SMP concentrations, however, the extent of the increase in high and low molecular weight (MW) organics was different for the effluents from SBRs operated at 8 and 20 °C. Results of SMP modelling demonstrated that a reduction in SBR operating HRT induced decreased utilization associated product (UAP) yields and the influence was greater at the SBR operating temperature of 8 °C. In contrast, biomass associated product (BAP) yields were relatively stable with SBR operating HRT but greater at lower SBR operating temperature. The effects of SBR operating HRT and temperature on fouling indices were also interactive. Reducing SBR operating HRT led to a lower increase in hydraulically reversible resistances and a greater increase in hydraulically irreversible resistances for the effluent from the SBR operated at 8 °C. Reducing the filtration temperature resulted in additional increase in membrane resistances, and the increase was greater at lower SBR operating HRT. The contribution of filtration temperature was observed to have the greatest impact on membrane resistances, followed in importance by SBR operating HRT and temperature. The comprehensive analysis undertaken in the present study provides insights into the interaction between secondary and tertiary operations on fouling development. The results can be employed to understand the limits of fouling control for tertiary treatment under challenging conditions.

Characterization and modelling of soluble microbial products in activated sludge systems treating municipal wastewater with special emphasis on temperature effect

Soluble microbial products (SMP) classified as utilization-associated products (UAP) and biomass-associated products (BAP) are the predominant foulants determining fouling in tertiary filtration. However, the exact mechanisms of BAP and UAP generation when treating real wastewaters under cold temperatures remain unrevealed. This paper presents the first study linking biological processes and SMP formation when treating real wastewaters through a combination of bioprocess modelling and advanced SMP characterization. Further, the impact of low operating temperatures on SMP production which has received relatively little attention was studied in detail. The use of liquid chromatography-organic carbon detection (LC-OCD) revealed a significant increase in protein and polysaccharide concentrations in the treated effluents as temperature decreased with a more sensitive impact on polysaccharides. The generation of SMP from biomass decay (BAP) and substrate utilization (UAP) was derived from the LC-OCD data on the basis of protein and polysaccharide mass balances. UAP and BAP yields were estimated as the ratios of the observed generation rates to the rates of substrate utilization and endogenous decay respectively, which both declined as temperature increased. A strong correlation was observed between temperature and BAP/UAP yields whereas the generation of BAP was more temperature sensitive than UAP. Such process modelling can be employed to assist with the optimization of the design and operation of membrane processes when treating wastewaters under challenging conditions like low temperature.