Oxidation of salicylic acid in water by the O3 and UV/O3 processes: removal and reaction byproducts

Suppressing Organic Bromine but Promoting Bromate: Is the Ultraviolet/Ozone Process a Double-Edged Sword for the Toxicity of Wastewater to Mammalian Cells?

Brominated byproducts and toxicity generation are critical issues for ozone application to wastewater containing bromide. This study demonstrated that ultraviolet/ozone (UV/O3, 100 mJ/cm2, 1 mg-O3/mg-DOC) reduced the cytotoxicity of wastewater from 14.2 mg of pentol/L produced by ozonation to 4.3 mg of pentol/L (1 mg/L bromide, pH 7.0). The genotoxicity was also reduced from 1.65 to 0.17 μg-4-NQO/L by UV/O3. Compared with that of O3 alone, adsorbable organic bromine was reduced from 25.8 to 5.3 μg/L by UV/O3, but bromate increased from 32.9 to 71.4 μg/L. The UV/O3 process enhanced the removal of pre-existing precursors (highly unsaturated and phenolic compounds and poly aromatic hydrocarbons), while new precursors were generated, yet the combined effect of UV/O3 on precursors did not result in a significant change in toxicity. Instead, UV radiation inhibited HOBr concentration through both rapid O3 decomposition to reduce HOBr production and decomposition of the formed HOBr, thus suppressing the AOBr formation. However, the hydroxyl radical-dominated pathway in UV/O3 led to a significant increase of bromate. Considering both organic bromine and bromate, the UV/O3 process effectively controlled both cytotoxicity and genotoxicity of wastewater to mammalian cells, even though an emphasis should be also placed on managing elevated bromate. Futhermore, other end points are needed to evaluate the toxicity outcomes of the UV/O3 process.

Production of an electro-biological particle electrode (EBPE) from lithium slag and its removal performance to salicylic acid in a three-dimensional electrocatalytic biological coupling reactor (3D-EBCR)

Electro-biological particle electrode (EBPE) prepared by lithium slag was used to remove salicylic acid in a three-dimensional electrocatalytic biological coupling reactor (3D-EBCR). The physical and chemical properties of the EBPE, the removal performance of salicylic acid and the degradation mechanism were studied. Results revealed as follows: (1) the EBPE prepared by lithium slag contained effective catalytic components including Fe₂O₃, SnO₂, ZnO, MnO, Rb₂O and TiO₂, with stable structure and good adsorption performance; (2) the 3D-EBCR with EBPE had strong adaptability to the current intensity in the range of 0.25-0.40 A, and the removal rates of COD and salicylic acid were maintained above 87.1% and 85.2% respectively; (3) salicylic acid was removed through the synergistic action of adsorption, electrochemical oxidation and biological action.